kernel/git/next/linux-next.git/drivers/clk/microchip/clk-mpfs.c, branch master

reset: mpfs: add non-auxiliary bus probing

2025-11-11T16:47:24+00:00

While the auxiliary bus was a nice bandaid, and meant that re-writing the representation of the clock regions in devicetree was not required, it has run its course. The "mss_top_sysreg" region that contains the clock and reset regions, also contains pinctrl and an interrupt controller, so the time has come rewrite the devicetree and probe the reset controller from an mfd devicetree node, rather than implement those drivers using the auxiliary bus. Wanting to avoid propagating this naive/incorrect description of the hardware to the new pic64gx SoC is a major motivating factor here. Reviewed-by: Philipp Zabel Acked-by: Philipp Zabel Signed-off-by: Conor Dooley

clk: microchip: mpfs: use regmap for clocks

2025-11-02T13:22:58+00:00

Convert the PolarFire SoC clock driver to use regmaps instead of iomem addresses as a preparatory work for supporting the new binding for this device that will only provide the second of the two register regions, and will require the use of syscon regmap to access the "cfg" and "periph" clocks currently supported by the driver. This is effectively a revert of commit 4da2404bb003 ("clk: microchip: mpfs: convert cfg_clk to clk_divider") and commit d815569783e6 ("clk: microchip: mpfs: convert periph_clk to clk_gate") as it resurrects the ops structures removed in those commits, with the readl()s and writel()s replaced by regmap_read()s and regmap_writes()s. Signed-off-by: Conor Dooley Reviewed-by: Claudiu Beznea Link: https://lore.kernel.org/r/20251029-surfboard-refocus-ca9b135ab123@spud Signed-off-by: Claudiu Beznea

module: Convert symbol namespace to string literal

2024-12-02T19:34:44+00:00

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

clock, reset: microchip: move all mpfs reset code to the reset subsystem

2024-05-07T21:57:46+00:00

Stephen and Philipp, while reviewing patches, said that all of the aux device creation and the register read/write code could be moved to the reset subsystem, leaving the clock driver with no implementations of reset_* functions at all. Move them. Suggested-by: Philipp Zabel Suggested-by: Stephen Boyd Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud Signed-off-by: Stephen Boyd

clk: microchip: mpfs: convert MSSPLL outputs to clk_divider

2024-02-06T14:07:18+00:00

After splitting the MSSPLL in two, the PLL outputs have become open-coded versions of clk_divider. Drop the custom clk ops structs, and instead use the generic clk_divider_ops. Signed-off-by: Conor Dooley

clk: microchip: mpfs: add missing MSSPLL outputs

2024-02-06T14:07:18+00:00

The MSSPLL has 4 outputs, of which only the cpu/axi/ahb clock parent is currently implemented. Add the CAN clock too, as that'll be needed by the driver for the CAN controller and uses output 3. While we are here, the other two missing clocks, used by the eMMC/SD controller and by the "user crypto". Signed-off-by: Conor Dooley

clk: microchip: mpfs: setup for using other mss pll outputs

2024-02-06T14:07:18+00:00

Now that the MSSPLL is split, and the "postdiv" divider of the cpu/AHB/AXI bus clock is represented by its own "hw" struct, make the shifts, register offset and width a parameter of the initialisation macro, rather than using defines that only work for one of the four outputs. Configuring this at initialisaion paves the way for using the other three output clocks, where the register offset, and the bit shift within that register, will differ. Signed-off-by: Conor Dooley

clk: microchip: mpfs: split MSSPLL in two

2024-02-06T14:07:18+00:00

The MSSPLL is really two stages - there's the PLL itself and 4 outputs, each with their own divider. The current driver models this as a single entity, outputting a single clock, used for both the CPU and AHB/AXI buses. The other 3 outputs are used for the eMMC, "user crypto" and CAN controller. Split the MSSPLL in two, as a precursor to adding support for the other 3 outputs, with the PLL itself as one "hw" clock and the output divider stage as another. Signed-off-by: Conor Dooley

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2023-04-30T00:29:39+00:00

Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...

clk: microchip: fix potential UAF in auxdev release callback

2023-04-13T22:44:11+00:00

Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in adev_release()"), the auxiliary device is not torn down in the correct order. If auxiliary_device_add() fails, the release callback will be called twice, resulting in a UAF. Due to timing, the auxdev code in this driver "took inspiration" from the aforementioned commit, and thus its bugs too! Moving auxiliary_device_uninit() to the unregister callback instead avoids the issue. CC: stable@vger.kernel.org Fixes: b56bae2dd6fd ("clk: microchip: mpfs: add reset controller") Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20230413-critter-synopsis-dac070a86cb4@spud Signed-off-by: Stephen Boyd