kernel/git/next/linux-next.git/drivers/clk/xilinx, branch master

clk: xilinx: Make sure clk_init_data is fully initialized

2026-08-31T15:29:39+00:00

The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. Make sure all members are fully initialized, to avoid such bugs, and to prevent future breakage when converting drivers to a different method for specifying the parents. Signed-off-by: Geert Uytterhoeven Message-ID: Signed-off-by: Brian Masney

Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

2026-08-17T16:28:08+00:00

Pull clk patches from Brian Masney: - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS), UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree bindings. Si549 support was added to the existing si544 driver. - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha EN7523 PCIe PERSTOUT reset lines. - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to the existing optional variant, and exports devm_clk_hw_register_composite_pdata() for modular drivers. - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1 support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL charge pump/lock parameter programming during dynamic reconfiguration. - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on registration failure, a prepare reference leak in the palmas driver, unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a clocking-wizard clock difference detection bug. - Various cleanups across tegra, st, and mvebu providers to stop misusing the consumer clock API, along with other minor fixes and improvements. Signed-off-by: Brian Masney * tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits) clk: tegra: set up proper EMC clock implementation for Tegra114 clk: clocking-wizard: remove 20kHz restriction clk: clocking-wizard: optimize clock search clk: clocking-wizard: fix clock difference detection clk: mediatek: mt8135: Fix inverted gate control for devapc_ck clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig clk: tegra: support 48MHz clock for pll_p_out1 clk: aspeed: add AST2700 PECI clock dt-bindings: clock: ast2700: add PECI clock clk: mediatek: Add mt8173-mfgtop driver dt-bindings: clock: mediatek: Add mt8173 mfgtop clk: tegra: clean-up simple provider misuse of the consumer API clk: st: clean-up simple provider misuse of the consumer API clk: mvebu: clean-up simple provider misuse of the consumer API clk: remove conditional return with no effect clk: Add devm_clk_bulk_get_enable() clk: en7523: add support for dedicated PCIe PERSTOUT reset dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT arm64: dts: cix: sky1: add audss cru reset: cix: add sky1 audss auxiliary reset driver ...

Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

2026-08-17T16:27:10+00:00

Pull clk patches picked up by Brian Masney: Here's various improvements and fixes for the clk subsystem that was posted prior to the opening of the last merge window. - Add spread spectrum clock (SSC) support to the clk framework, including a new assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum() API with KUnit tests (Peng Fan) - Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a common SCMI clock header (Peng Fan) - Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and reset generator (Xuyang Dong) - Add clk_determine_rate_noop() helper for clock drivers that can do any rate, and convert existing open-coded implementations across hisilicon, imx, qcom, renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain drivers (Brian Masney) - Add kernel-doc documentation for struct clk_core and the core clock flags, and wire up clk identifiers into the documentation build (Brian Masney) - Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum rate for large rate requests, with KUnit tests (Lad Prabhakar) - Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64 return values, incorrect PLL_CTL1_FRAC bit field width, and broken determine_rate logic (Joey Lu) - Support unique clock names for multi-socket Tegra platforms (Jon Hunter) - Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev) - Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov, Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak, Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König, William Theesfeld, Xuyang Dong, and Yu-Chun Lin Signed-off-by: Brian Masney [sboyd@kernel.org: Fix allmodconfig modpost failure in scmi] * tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits) pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop() pmdomain: mediatek: airoha: use clk_determine_rate_noop() phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop() clk: sprd: use clk_determine_rate_noop() clk: scpi: use clk_determine_rate_noop() clk: samsung: acpm: use clk_determine_rate_noop() clk: rp1: use clk_determine_rate_noop() clk: renesas: rzg2l-cpg: use clk_determine_rate_noop() clk: qcom: smd-rpm: use clk_determine_rate_noop() clk: qcom: rpmh: use clk_determine_rate_noop() clk: qcom: rpm: use clk_determine_rate_noop() clk: imx: scu: use clk_determine_rate_noop() clk: hisilicon: hi3660-stub: use clk_determine_rate_noop() clk: add clk_determine_rate_noop() clk: imx: scu: drop redundant init.ops variable assignment clk: test: convert constants to use HZ_PER_MHZ docs: clk: include some identifiers to keep documentation up to date clk: add kernel docs for struct clk_core clk: add kernel docs for the core flags clk: hisilicon: allow COMPILE_TEST builds ...

clk: clocking-wizard: remove 20kHz restriction

2026-07-28T15:25:37+00:00

Reviewed-by: Shubhrajyoti Datta Reviewed-by: Brian Masney Signed-off-by: Colin Foster Signed-off-by: Brian Masney

clk: clocking-wizard: optimize clock search

2026-07-28T15:25:37+00:00

When an exact clock match is found, there is no need to continue searching. This process was optimized for versal as part of 'commit e0a94c6bb5b4 ("clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()")' but that logic wasn't applied to the non-versal driver. Apply this fast-exit logic to the non-versal driver. Reviewed-by: Shubhrajyoti Datta Reviewed-by: Brian Masney Signed-off-by: Colin Foster Signed-off-by: Brian Masney

clk: clocking-wizard: fix clock difference detection

2026-07-28T15:25:36+00:00

Reviewed-by: Shubhrajyoti Datta Reviewed-by: Brian Masney Signed-off-by: Colin Foster Signed-off-by: Brian Masney

clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig

2026-07-28T15:25:30+00:00

When dynamically reconfiguring the PLL multiplier, the charge pump (CP), loop filter resistance (RES), and lock timing parameters must be updated to match the new multiplier value. Without this, the PLL may fail to lock or exhibit jitter at certain multiply factors. Add lookup tables for CP/RES and lock timing values indexed by multiplier range, and program registers for chargepump and lock delay during dynamic reconfiguration. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Brian Masney

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

clk: clocking-wizard: fix integer overflow in rate calculation

2026-06-29T17:17:28+00:00

When using driver on Zynq-7000 (32-bit) determine_rate calculation overflows. For instance requesting 32MHz with 100MHz parent clock results in 100000000*(4*1000+0) 32-bit multiplication. Replace the expression with mult_frac which is already used in clk_wzrd_recalc_ratef. Cc: stable@vger.kernel.org Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts") Signed-off-by: Pale Löbl Reviewed-by: Brian Masney Signed-off-by: Brian Masney

Merge branch 'clk-determine-rate' into clk-next

2025-10-06T18:02:50+00:00

* clk-determine-rate: (120 commits) clk: microchip: core: remove duplicate roclk_determine_rate() clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver clk: scmi: migrate round_rate() to determine_rate() clk: ti: fapll: convert from round_rate() to determine_rate() clk: ti: dra7-atl: convert from round_rate() to determine_rate() clk: ti: divider: convert from round_rate() to determine_rate() clk: ti: composite: convert from round_rate() to determine_rate() clk: ti: dpll: convert from round_rate() to determine_rate() clk: ti: dpll: change error return from ~0 to -EINVAL clk: ti: dpll: remove round_rate() in favor of determine_rate() clk: tegra: tegra210-emc: convert from round_rate() to determine_rate() clk: tegra: super: convert from round_rate() to determine_rate() clk: tegra: pll: convert from round_rate() to determine_rate() clk: tegra: periph: divider: convert from round_rate() to determine_rate() clk: tegra: divider: convert from round_rate() to determine_rate() clk: tegra: audio-sync: convert from round_rate() to determine_rate() clk: fixed-factor: drop round_rate() clk ops clk: divider: remove round_rate() in favor of determine_rate() clk: visconti: pll: convert from round_rate() to determine_rate() clk: versatile: vexpress-osc: convert from round_rate() to determine_rate() ...