kernel/git/next/linux-next.git/drivers/hid, branch master

Merge branch 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git

2026-08-28T12:54:45+00:00

HID: wacom: validate report length in wacom_intuos_pro2_bt_irq

2026-08-25T12:09:34+00:00

wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type independent of the report descriptor, so a malicious or malfunctioning paired/spoofed Bluetooth peripheral can advertise that VID/PID and send an undersized report that still satisfies the data[0] == 0x80/0x81 gate. The driver then reads past the received report and forwards the bytes to userspace via evdev (MSC_SERIAL / ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds read with a concrete userspace read-back channel, and a true out-of-bounds read on transports whose backing buffer is sized to the (small) report descriptor rather than a fixed-size staging buffer. This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq") already hardened in the sibling wacom_intuos_bt_irq(), which guards each report id against its minimum length before parsing. Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject reports shorter than the furthest offset the selected branch actually dereferences, warn, and bail out. Because the whole pen/touch/pad/ battery chain runs unconditionally per branch, a single up-front check against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT, 46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on a short report also skips those calls for the same malformed report, which is the safe, conservative behavior. Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: stable@vger.kernel.org Signed-off-by: Ibrahim Hashimov Assisted-by: AuditCode-AI:2026.07 Acked-by: Jason Gerecke Signed-off-by: Jiri Kosina

HID: multitouch: Fix stale MT slots when contact count drops to zero

2026-08-25T09:33:02+00:00

The INGENIC 17EF:6161 touchscreen (Lenovo Yoga Book 9 14IAH10) reports HID_DG_CONTACTCOUNT=0 in the frame immediately following the last finger lift rather than omitting the frame entirely. In mt_touch_report() the existing code only updates num_expected when contact_count is non-zero, so a zero contact count on the first packet of a new frame leaves num_expected at its previous value (e.g. 2 for a two-finger gesture). The sync check "num_received >= num_expected" then evaluates "0 >= 2" and never fires, preventing INPUT_MT_DROP_UNUSED from releasing the stale slots. Those slots remain active in the kernel MT layer until the next touch, at which point they are released in a batch alongside the new contact — causing the userspace event consumer to miss the intervening finger-up sequence and corrupt its gesture session state. Fix by resetting num_expected to 0 when contact_count is zero and num_received is still 0 (i.e., this is the first and only packet of the frame, not a continuation packet in a multi-packet sequence). With num_expected=0 the sync check "0 >= 0" fires immediately, calling input_mt_sync_frame() which drops the stale slots via INPUT_MT_DROP_UNUSED. The num_received==0 guard is critical: continuation packets in a multi-packet frame arrive after at least one contact has already been processed (num_received>0), so they are correctly excluded from this path and the existing multi-packet logic is unaffected. Signed-off-by: Dave Carey Tested-by: Dave Carey Signed-off-by: Benjamin Tissoires

HID: i2c-hid: Add a quirk for a Cirque I2C device.

2026-08-25T08:49:04+00:00

Cirque touchpads with PID D0C1 generate an error when probed by the I2C HID driver, resulting in no hidraw device created. Adding I2C_HID_QUIRK_NO_IRQ_AFTER_RESET fixes the issue. Signed-off-by: Vadim Klishko Signed-off-by: Benjamin Tissoires

Merge tag 'platform-drivers-x86-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2026-08-24T17:16:35+00:00

Pull x86 platform driver updates from Ilpo Järvinen "Highlights: Major refactoring effort: stop setting acpi_device_name/class() and pnp.device_class to facilitate their eventual removal Many rollback/remove path fixes (presumably mostly found by AI) Miscellaneous cleanups / refactoring / improvements amd/halo: - Add Halo RGB LED driver amd/hsmp: - Properly serialize probe, remove, and data paths - Add support for protocol v7 used by Family 1AH Model 80H - Fix error checking corner cases (largely from AI review) - Reject negative power cap amd/pmc: - Improve behavior on platforms that do not support STB - Add T14 Gen2 AMD (20XL) to s2idle quirk list amd/pmf: - Add ioctl interface to retrieve device metrics - Add support for new metrics tables used by Family 1AH Model 80H qcom-hamoa-ec (arm64): - Reject short responses asus-nb-wmi: - Support ProArt key on ASUS ProArt PX13 asus-armoury: - Gate PPT writes behind active fan curve - Add power limits for more models dell-wmi-base: - Fix handling of ultra performance key dell-wmi-sysman: - Don't hex dump attribute security buffer hp-bioscfg: - Various fixes - Improve reduced ACPI packages support (necessary for HP EliteBook 840 G2) lg-laptop: - Fix LED resource handling - Add support for events used in newer models - Fix keyboard backlight support on LG Gram 16T90SP hp-wmi: - Generalize thermal params to board params - Manage CPU and GPU PWM independently - Add GPU MUX switch support - Add Victus 15-fb0xxx support - Add OMEN MAX 16-ak0xxx, OMEN 16-n0xxx, OMEN 16-wd0xxx, OMEN 16-wf0xxx, and OMEN board ID 8D88 support - Add OMEN Transcend 16-u0xxx support huawei: - Add support for Fn-lock ACPI interface found on newer Huawei laptops such as MateBook 14 2024 ISST: - Improve input validation (many fixes) - Disallow SST-CP (core-power) feature if perf profile add fails lenovo/yb9-kbdock: - Add driver for Yoga Book 9 14IAH10 lenovo/ymc: - Extend hinge switch query to support Yoga 9 2-in-1 14IPH11 - Prevent loading on Yoga Book 9 14IAH10 to avoid duplicated input nodes msi-ec: - Add MSI Raider A18 HX A9WJG and MSI Katana GF76 11UEK support msi-wmi: - Add MSI Claw M-Center keys support oxpec: - Add support for OneXPlayer X2 Mini Pro redmi-wmi: - Report kbd backlight cycle, OEM preset power mode, and FnLock toggle events to userspace samsung-galaxybook: - Add Samsung Galaxy Book6 Pro support thinkpad_acpi: - Add USB-C Security support uniwill-laptop: - Add keyboard backlight, AC auto boot, and USB powershare support - Add MACHENIKE L16 Pro, AiStone X4SP4NAL, and Avell A60 MUV support - Make lightbar max brightness configurable and add support for LAPQC71A/B" * tag 'platform-drivers-x86-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (152 commits) platform/x86: think-lmi: Fix current password length check platform/x86: redmi-wmi: report EC state change events MAINTAINERS: update Intel PMC Core maintainer contact platform/x86: oxpec: Add support for OneXPlayer X2 Mini Pro platform/x86: thinkpad_acpi: Fix fan speed reporting on Edge E330 platform/x86: msi-ec: Add MSI Katana GF76 11UEK EC firmware platform/x86: think-lmi: Fix certificate thumbprint sysfs output mlxbf-bootctl: fix the build error with FIELD_PREP() platform/x86: think-lmi: Free system certificate signatures platform/x86: ISST: Add a NULL check for sst_inst[] platform/x86: ISST: Return error during profile addition platform/x86: ISST: Just allow 2 bits for SST feature enable platform/x86: ISST: Use PP level enable mask platform/x86: ISST: Validate parameter for frequency and priority platform/x86: ISST: Validate parameter for core power state platform/x86: ISST: Validate max level for set feature platform/x86: ISST: Validate logical CPU id and clos id platform/x86: ISST: Validate level in perf mask ioctls platform/x86: ISST: Validate socket ID in clos_assoc ioctl platform/x86/amd/hsmp: Reject negative power cap writes in hwmon ...

HID: hyperv: make pointer arithmetics understandable for FORTIFY_SOURCE

2026-08-21T13:59:01+00:00

Commit 83df7b5fa6735b5084ecd2 ("HID: hyperv: add KUnit coverage for device info bounds") introduced this piece of code report = ((u8 *)&info->hid_descriptor) + info->hid_descriptor.bLength; memset(report, 0x42, 4); to populate the report, making use of the fact that the report &info->hid_descriptor points to a struct hid_descriptor (which is a fixed-size struct). GCC's FORTIFY_SOURCE infer the object size from that specific struct field rather than the outer dynamically allocated info buffer. As a result, writing past sizeof(struct hid_descriptor) triggers the __write_overflow_field warning. Calculate the pointer offset using info directly, so the compiler evaluates the memory bounds against the allocated flexible layout of struct synthhid_device_info instead of the nested struct. Fixes: 83df7b5fa6735b5084ecd2 ("HID: hyperv: add KUnit coverage for device info bounds") Reported-by: Jürgen Groß Tested-by: Jürgen Groß Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: hyperv: fix build breakage with certain configs

2026-08-21T13:31:51+00:00

If CONFIG_HID_HYPERV is built-in (=y) while CONFIG_KUNIT is built as a module (=m), the linker fails to resolve kunit_mem_assert_format when creating vmlinux. Fix the dependencies in Kconfig. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202608190536.d9qCkWWc-lkp@intel.com/ Fixes: 83df7b5fa6735b5084ecd2 ("HID: hyperv: add KUnit coverage for device info bounds") Acked-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

Merge tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2026-08-20T14:36:20+00:00

Pull bpf updates from Daniel Borkmann: "Major changes: - Redesign the verifier error reporting: failures now carry source and instruction annotations along with the causal event history that led to them, making program rejections far easier to debug and repair (Kumar Kartikeya Dwivedi) - Add arena argument support to kfuncs and struct_ops through the new __arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan, Kumar Kartikeya Dwivedi, Ihor Solodrai) - Signed BPF program loader rework to accommodate both BPF and security community needs where the kernel runs the signature verification at BPF_PROG_LOAD time before the LSM admission hook (Daniel Borkmann) - Add a set of ksock kfuncs which let BPF LSM and syscall programs create, connect and send on UDP sockets in order to emit telemetry data (Mahe Tardy) - Unify helper and kfunc call argument verification and classify kfunc arguments purely from BTF into a generated bpf_func_proto which is computed once at add-call time (Amery Hung) Other features and fixes: - Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport) - Add bidirectional VLAN support to bpf_fib_lookup() through the new BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash Duduskar) - Infer zext_dst from static register liveness analysis to fix 32-bit zero-extension semantics, and remove the artificial limitations on pointer types eligible for spilling (Eduard Zingerman) - Inline the numeric open-coded iterator kfuncs so that bpf_for() loops no longer pay a kfunc call on every iteration (Puranjay Mohan) - Add an arena-based bitmap data structure to libarena along with serial and parallel selftests (Emil Tsalapatis) - Teach resolve_btfids to discover kfuncs from the kernel's BTF ID sets and to emit kfunc BTF decl tags, reducing the kernel build's dependency on pahole features (Ihor Solodrai) - Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that tunnel decapsulation can update the GSO and encapsulation state of the skb (Nick Hudson) - Fix the ring buffer pending_pos walk and the available-data accounting on 32-bit position wrap (Israel Téllez García) - Add memory usage accounting for arena maps and fix an mmap_lock deadlock on arena lock failure (Jiayuan Chen) - Add tracing_multi link info support to the kernel UAPI and bpftool, and refactor the stack map code to run with preemption disabled (Jiri Olsa) - Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the egress direction of the target's peer device (Jordan Rife) - Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular modules, can declare kfuncs safe to call under bpf_spin_lock instead of relying on the verifier's hard-coded allowlist (Kaitao Cheng) - Introduce global percpu data for BPF programs with libbpf probing and bpftool skeleton support, and stop exposing uninitialized kernel heap memory when copying per-CPU map values (Leon Hwang) - Add s390 JIT support for load-acquire and store-release instructions (Maxim Khmelevskii) - Fix a CFI mismatch in the task work callback and an arm64 KASAN false positive after bpf_throw() (Mykyta Yatsenko) - Reject writes through untrusted BTF pointers and bound the rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar) - Invalidate RCU pointers only after the final spin unlock and account for preempt and IRQ disabled regions as overlapping RCU protection (Ning Ding) - Support mixing bpf2bpf calls and tail calls on RV64, add signed operations and 32-bit atomics to the RV32 JIT, and add timed may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang) - Fix a use-after-free on mm_struct in bpf_find_vma() for foreign tasks and an mmap_lock leak in the irq_work path (Sanghyun Park) - Populate mmap-able BPF array map memory lazily which makes mmap() O(1) instead of proportional to the map size (Song Liu) - Introduce a jit_required flag and reject programs with inlined helpers when no JIT is available, where the interpreter would otherwise jump into an invalid address (Tiezhu Yang) - Fix the x86 JIT per-CPU address resolution into an extended register where the REX prefix dropped the high destination register bit (Vineet Gupta) - Reject MEM_ALLOC BTF accesses past object bounds, arena frees below the arena base, and mixed arena and ordinary atomic paths (Yiyang Chen) - Fix the trampoline handling of 128-bit arguments and of return values larger than 8 bytes (Yonghong Song) - Ensure that any fault prone load is rewritten with exception table handling, and fix the arena load-acquire and atomic fetch handling in the x86, arm64, riscv and s390 JITs (Daniel Borkmann) - Many more fixes and cleanups across the verifier, arena, trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390 JITs, libbpf, bpftool, resolve_btfids and selftests" * tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits) selftests/bpf: Add tests for a store on a fault prone qdisc pointer selftests/bpf: Add tests for fault prone loads out of RCU pointers selftests/bpf: Add tests for pointer type merge at a shared load selftests/bpf: Remove duplicate copies of the arena spinlock qnodes selftests/bpf: Retry stat generation in cgroup_iter_memcg selftests/bpf: Test pseudo-function policy diagnostics bpf: Distinguish function references in policy diagnostics bpf: Preserve source attribution without source text selftests/bpf: Test kfunc argument diagnostics bpf: Correct kfunc argument diagnostics bpf: Use canonical stack argument names in diagnostics bpf: Preserve R0 lineage across helper calls selftests/bpf: Exercise negative optlen in cgroup getsockopt hook bpf: Reject negative optlen in cgroup getsockopt hook selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state bpf: Clear decap state on skb_adjust_room shrink path bpf: Allow new DECAP flags and add guard rails bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation bpf: Refactor masks for ADJ_ROOM flags and encap validation bpf: Name the enum for BPF_FUNC_skb_adjust_room flags ...

Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2026-08-19T17:00:31+00:00

Pull HID updates from Jiri Kosina: "Core: - fix long-standing force-feedback initialization race across the subsystem (Dmitry Torokhov) - switch to system_dfl_wq (Marco Crivellari) AMD-SFH: - support for tablet-mode switch for AMD SFH-based systems (Basavaraj Natikar) HyperX: - support for HyperX QuadCast 2 (Benjamin Blume) I2C-HID: - support for devices that provide HID descriptor solely through the ACPI _DSM method (XIE Zhibang) Intel-THC-HID: - support for full I2C bus config parameters (Even Xu) Logitech: - HID++ 2.0 repogrammable button support (Elliot Douglas) - Bolt receiver support for HID++ devices (Erik Håkansson) MSI: - support for MSI Claw (Derek J. Clark) Steam: - initial support for 2026 Steam Controller (Vicki Pfau) - support for sensor events on the 2025 Steam Controller (Vicki Pfau) And many, many other fixes for various long standing issues that were found by new modern tools, and quite a few device ID additions" * tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (146 commits) HID: tmff: Use 64-bit arithmetic for force feedback scaling HID: multitouch: reclassify HTIX5288 to WIN_8_FORCE_MULTI_INPUT_NSMU HID: sensor: custom: Fix field sysfs group cleanup on failure HID: sensor: custom: Fix use-after-free in enable_sensor HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer HID: haptic: don't write an uninitialized value to unhandled usages HID: intel-thc-hid: intel-quickspi: fix autosuspend cleanup during teardown HID: intel-thc-hid: intel-quicki2c: fix autosuspend cleanup during teardown HID: steam: Zero out inputs when disabling gamepad mode HID: steam: Clean up locking HID: steam: Don't set feature reports when disconnecting HID: steam: Fix wording of connect/disconnect logs HID: steam: Initial 2026 Steam Controller support HID: steam: Refactor registration HID: logitech: add Bolt receiver support for Logitech HID++ devices HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature HID: universal-pidff: stop the device when force-feedback init fails HID: haptic: move FF initialization into .input_configured() HID: logitech-hidpp: move FF initialization to .input_configured() HID: megaworld: move FF initialization to .input_configured() ...

Merge branch 'for-7.3/core' into for-linus

2026-08-19T07:27:26+00:00

- fix long-standing force-feedback initialization race across the subsystem (Dmitry Torokhov) - switch to system_dfl_wq (Marco Crivellari)