The linux-next integration testing tree https://git.rulkc.org/pub/scm/linux/kernel/git/next/linux-next.git/atom?h=master 2026-08-28T13:12:01+00:00 2026-08-28T13:12:01+00:00 Mark Brown broonie@kernel.org 2026-08-28T13:12:01+00:00 urn:sha1:cda7583d8b5c6e0499dadad83e293481931e8fbd 2026-08-28T12:34:04+00:00 Mark Brown broonie@kernel.org 2026-08-28T12:34:04+00:00 urn:sha1:47caa2f8bd4084fc8e590317fd0070da4b4c094a 2026-08-27T12:37:45+00:00 bui duc phuc phucduc.bui@gmail.com 2026-07-27T10:11:25+00:00 urn:sha1:fcc1d6eab4ce4ba86ae05a87ecf7ce06cd2ca4d8 Use dev_err_probe() for devm_clk_get() to prevent log spam when probe returns -EPROBE_DEFER. Drop the redundant error message after devm_request_irq(), since the helper already reports request failures internally. Return the original error from platform_get_irq() instead of replacing it with -EINVAL. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260727101125.28291-2-phucduc.bui@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2026-08-27T12:37:45+00:00 bui duc phuc phucduc.bui@gmail.com 2026-07-27T10:11:24+00:00 urn:sha1:5a7c42811589e2da5e7f1fcd45328e7ead70d008 Do not print the error twice when acquiring clock fails and drop the redundant error message after devm_request_irq(), as the helper already reports request failures internally. Signed-off-by: bui duc phuc <phucduc.bui@gmail.com> Link: https://patch.msgid.link/20260727101125.28291-1-phucduc.bui@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2026-08-26T12:23:44+00:00 Alvin Šipraga alvin.sipraga@analog.com 2026-08-18T16:00:02+00:00 urn:sha1:21efadc62272cabee9bec27777ae75d84a9ca8a8 So as not to clobber any pre-programmed GPIO state in the execution of its gpiochip ops, the driver caches things during probe time. However, since those ops can be called both during and immediately after the call to devm_gpiochip_add_data(), it is imperative that things are cached before that. That's not the case right now, so reorder the two steps to prevent any clobbering. In the concrete example which motivated this change, a bootloader was preconfiguring an important GPIO output to HIGH before booting the kernel. Linux would then inadvertently set that output to LOW while configuring a GPIO hog on a discrete GPIO line within the same 8-bit bank (because the cached value was 0=LOW). Fixes: ba9f507a1bea ("Input: adp5588-keys - export unused GPIO pins") Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20260818-adp5588-gpio-cache-v1-1-650a2674fc0d@analog.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2026-08-25T16:38:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-08-25T16:38:50+00:00 urn:sha1:93e4b3076b5f2d853462b9777d083c77fc0b7b23 Pull char/misc/IIO/etc driver updates from Greg KH: "Here is the big set of char, misc, iio, counter, fpga, and other small driver subsystems for 7.3-rc1. Overall, due to some driver removals we only added a bit more code than removed, which was a nice change. Highlights in this merge request are: - Loads of IIO driver updates and additions - binder driver updates (more on that below...) - Removal of the SGI XP and GRU drivers as they are not used anymore and turn out to be pretty insecure overall - Removal of the obsolete ibmasm driver as it's not being used anymore - Coresight driver updates and additions - Mei driver udpates - Counter driver updates - FPGA driver updates - ICC driver updates - lots and lots of other tiny driver updates to resolve reported issues All of these have been in linux-next for a while" * tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits) iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF iio: adc: pac1921: fix wrong channel used in trigger handler read iio: light: gp2ap002: re-enable irq if runtime suspend fails iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes iio: light: apds9306: fix PM reference leak in apds9306_read_data() iio: gyro: mpu3050: fix sign of raw angular velocity readings iio: srf04: fix pm_runtime handling on probe error path iio: adc: ad4080: configure backend data size iio: adc: adi-axi-adc: add data size support for AD408X backend iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable iio: dac: ad5446: fix OF module device table iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask iio: light: opt4001: Reject integration times with a non-zero seconds part iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem() iio: light: opt4001: Fix power down clearing bits of the wrong register iio: light: opt4060: Fix incorrect register name in threshold read error message iio: light: opt4060: Fix pointer type passed to div_u64_rem() iio: light: opt4060: Reject integration times with a non-zero seconds part iio: light: ltrf216a: fix runtime PM reference leak in error path iio: pressure: dps310: fix NULL pointer dereference on ACPI probe ... 2026-08-19T16:10:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-08-19T16:10:07+00:00 urn:sha1:7711f4417f1870e4bfbee1a7d501f789255bc7aa Pull gpio updates from Bartosz Golaszewski: "GPIO core: - extend the gpio-regmap abstraction layer with more features allowing users to override configuration setting, translate register values and masks and enable/disable interrupts - extend GPIO kunit tests with suites verifying probe ordering by software node devlink support and software node hogs - shrink GPIO kunit initialization code - coding style updates (remove commas from sentinels where applicable) - with all users now converted treewide to using real firmware node links for software node GPIO lookup: remove the deprecated label-matching mechanism from from GPIO core - drop redundant return value check of nonseekable_open() in gpiolib-cdev - use IRQ trigger helpers where applicable Driver updates: - refactor error paths and logging in gpio-nomadik - use more modern interfaces for getting resources in gpio-rockchip, gpio-bt8xx and gpio-pca9570 - add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610 - drop unused FILONOFF macro from gpio-rcar - extend build coverage of ioport GPIO drivers with COMPILE_TEST=y - only enable the gpio-rtd driver by default with ARCH_REALTEK=y to avoid bloating the build - refactor coding style in several drivers - use correct endianess translation in gpio-pcf85x - add wake-up interrupt support to gpio-mvebu - apply initial value in direction output setter in gpio-by-pinctrl Misc: - replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h which now exports all the deprecated APIs - select GPIOLIB_LEGACY in Kconfig where required treewide - use software nodes for gpio-keys in MFD drivers Devicetree bindings: - describe the realtek rtd1625 GPIO controller - document new models for gpio-pca95xx and gpio-cadence - document new property in gpio-rockchip" * tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits) gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property gpio: Use IRQ trigger mask helpers gpio: allow COMPILE_TEST for IOPORT drivers gpio: realtek: Add driver for Realtek DHC RTD1625 SoC gpio: regmap: Add IRQ enable/disable helpers gpio: regmap: Add set_config callback gpio: regmap: Add value_xlate callback gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback gpio: regmap: Order kernel-doc descriptions with the actual appearance gpio: regmap: Apply default resource callbacks for regmap IRQ chip gpio: regmap: Provide default IRQ resource request and release callbacks Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC" gpib: gpio: replace linux/gpio.h inclusion Input: matrix_keyboard - replace linux/gpio.h inclusion phy: replace linux/gpio.h inclusions pcmcia: replace linux/gpio.h inclusions ASoC: replace linux/gpio.h inclusions mfd: replace linux/gpio.h inclusions sh: replace linux/gpio.h inclusions ... 2026-08-19T07:45:01+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2026-08-19T07:45:01+00:00 urn:sha1:258ad625930ff4535ba6b438c8b49509e9a1c2dd Jonathan writes: IIO new device support, features, cleanup for 7.3 Includes a merge of 7.2-rc2 to pick up the changes around mod_devicetable.h and reduce resulting conflicts around includes. New device support ------------------ adi,ad3530R - Add support for the AD3532R and AD3532 16 channel DACs. adi,ad4080 - Add support for the AD4883 ADC. adi,ad5686 - Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs over SPI - Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C - Significant driver refactoring prior to these additions, partly to reduce bus traffic and to add triggered buffer and gain control support. An earlier set added support for missing supplies, reset and LDAC GPIO. adi,adf41513 - New driver to support this PLL frequency synthesizer that runs up to 26.5 GHz. - Included infrastructure to handle higher precision attributes with extensive tests adi,ltc2378-20 - New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370 LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed capture via appropriate backend and conventional triggered buffer SPI capture. invensense,icm42607 - New driver for this IMU. mediateck,mt6323 - New driver for this PMIC ADC. microchip,mcp47a1 - New driver for this I2C 6 bit DAC. nxp,mcf54415-dac - New driver for this DAC found in NXP SoCs. qst,qmc5884l - New driver for this 3 axis magnetometer. Included dt vendor entry for qst. qst,qmc6308 - New driver for this 3 axis magnetometer. sensiron,slf3s - New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW channel type. st,vl53l1x - Refactors to improve readability. ti,ads112c14 - New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring some new ABI for input chopping, particular useful for resistive sensors like thermocouples or Wheatstone bridges. - Support CRC8 detection of corruption on the bus. - Support buffered reads. ti,tmp117 - (trivial) Add support for the tmp119 temperature sensor. xilinx,versal-sysmon - New ADC driver for this block found on various FPGAs including various bus interfaces, threshold and oversampling support. dt binding updates ------------------ new shared bindings - excitation-channels and excitation-current-nanoamp allow per channel specification of currents used for resistive sensor measurement. - reference-sources property to allow selection of a per channel reference. rockchip,saradc - Add RV1106 which is compatible with the RV3588. Features -------- buffer-dmaengine - Allow cyclic buffers, useful for repeating sequence generation with DACs. devantech,dmard09 - Implement read back of channel scale - previously interface always returned an error. hid,sensors-als - Enable separate channel scaling for hardware that supports it. invensense,timestamp library - Various precision improvements. invensense,icm42600 - Add support for hwfifo watermark interfaces. taos,tcs3472 - Support wait time and sampling frequency control. Cleanups, minor fixes --------------------- Minor cleanups not mentioned at all in this summary such as white space fixes or typos. Affecting various drivers - Cleanup of conditionals that had no affect. - Drop some runtime pm local wrappers as now runtime_pm does the mark_last_busy part inside the put, these provide no useful code deduplication or readability advantages over directly calling the runtime_pm functions. - Return 0 from write_raw() on success. - Use of dev_err_probe() to simplify code and sometimes provide useful info for deferred probe debugging. - Drop some redundant error prints where the called function already provides information on errors. - Make some read only arrays in functions static. - Fix up missing handling of regcache_sync() errors. - Drop some false kernel-doc markings. - Add missing MODULE_DEVICE_TABLE for some of_match_id tables. - Use local variables for things like the struct device to shorten and improve readability of code. - Drop some unused structure elements. - Reorder dds.h macro parameters to be inline with others. - Header reorders and IWYU. Often part of a more significant series. - Remove abstractions designed to allow a driver to support multiple device types, when they have been around a long time and only the original part showed up. - Initialize spi_device_id arrays using member names following dropping of driver data from drivers that didn't actually use it. - Catch up with i2c_device_id tables added since previous effort to use named initializers for all those. - Use kernel types in a few places instead of standard C ones or bare unsigned. Misc - Update Xilinx AMS maintainer. - Update email address for Maxwell Doose. - Update email address for Siratul Islam. - Update email address for Tomasz Duszynski and re-add Tomasz to various maintainer entries. Docs - Encourage use of differential channel naming even when there is no flexibility in input to differential pair mapping. Intended to provide a strong signal to userspace that a channel is differential. adi,ad_sigma_delta - Allow COMPILE_TEST without any users. adi,ad2s1201 - Refactor trigger handler to avoid mix of guard() and goto. adi,ad5686 - Avoid potential NULL dereference is user forces a driver bind. adi,ad5696 - Add a couple of missing entries to the of_match_id table and update binding to match. atmel,ad91_adc - Use const char * for DT string property allowing a cast to be dropped. avia,hx711 - Various refactors and cleanup to enable support of additional parts (to come) - Add missing supply and gpio dt-bindings. bosch,bmc150 - Harden against device reporting too large a FIFO sample count. - Use FIELD_PREP() / FIELD_GET() to improve readability. freescale,fxls8962af - Harden against device reporting too large a FIFO sample count. hid-sensors-* - Reorder probe to not expose userspace interfaces until the rest of the setup is done to avoid potentially dropping data. honeywell,abp2030pa - Drop an unreachable return. invensens,icm45600 - Harden against bad value of FIFO sample count from device. - Use i2c_match_data if firmware table sourced match data isn't available. nxp,mpl1115 - Ensure runtime_pm is balanced on error in probe. rohm,bm1390 - Make the driver slightly more likely to recover from transient errors. sensiron,sgp30 - Handle thread creation errors. st,lsm6dsx - Update the enable mask when doing sensor fusion to avoid incorrect fifo data handling. st,stm32-dfsdm - Treat dt flags as booleans. ti,ads1015 - Switch to devm helpers which simplified code and closed a resource leak. ti,opt3001 - Split complicated opt3001_get_processed() logic into irq an no irq helper functions. - Use devm to simplify code. - Use guard() to simplify code. - Reorder probe so final call exposes userspace interfaces. - Various other more minor cleanup taos,tsl2772 - Fix calibscale readback to check right channel type. taos,tsl2583 - Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents. * tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits) iio: dac: mcp47a1: add support for new device dt-bindings: iio: dac: add support for mcp47a1 iio: Update email for Maxwell Doose iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion iio: light: cm32181: return zero after writing calibscale iio: flow: add Sensirion SLF3S liquid flow sensor driver iio: core: add IIO_VAL_DECIMAL64_FEMTO format type dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor iio: types: add IIO_VOLUMEFLOW channel type iio: ABI: Encourage differential voltage ABI usage iio: adc: ltc2378: Add support for LTC2338-18 iio: adc: ltc2378: Enable triggered buffer data capture iio: adc: ltc2378: Enable high-speed data capture iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs dt-bindings: iio: adc: Add ltc2378 iio: magnetometer: ak8974: remove conditional return with no effect iio: light: tsl2583: remove conditional return with no effect iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper ... 2026-08-18T12:21:04+00:00 Bartosz Golaszewski bartosz.golaszewski@oss.qualcomm.com 2026-08-18T12:21:04+00:00 urn:sha1:146cc263e457ff6055fe7829e4f4f4b0b5d5dd86 Linux 7.2 2026-08-15T04:26:07+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2026-08-15T04:26:07+00:00 urn:sha1:b4d85f863e5a6f1fa01b186001af0f68f4f5239e Prepare input updates for 7.3 merge window.