kernel/git/next/linux-next.git/drivers/misc, branch master

Merge branch 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/srini/fastrpc.git

2026-07-06T13:54:24+00:00

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge branches 'fastrpc-fixes' and 'fastrpc-for-7.3' into fastrpc-for-next

2026-07-01T21:19:19+00:00

* fastrpc-fixes: misc: fastrpc: fix channel ctx ref leak when session alloc fails misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke misc: fastrpc: Remove buffer from list prior to unmap operation misc: fastrpc: Fix initial memory allocation for Audio PD memory pool * fastrpc-for-7.3: MAINTAINERS: fastrpc: remove inactive maintainer and add reviewer misc: fastrpc: Allow fastrpc_buf_free() to accept NULL misc: fastrpc: Move prints outside spinlock in fastrpc_cb_probe

misc: fastrpc: fix channel ctx ref leak when session alloc fails

2026-07-01T21:18:51+00:00

fastrpc_channel_ctx_get() is called in fastrpc_device_open() before fastrpc_session_alloc(). If session alloc fails, the error path returns -EBUSY without calling fastrpc_channel_ctx_put(), leaking the reference. Fix by adding the missing put. Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla

misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke

2026-07-01T21:18:51+00:00

When an invoke is interrupted by a signal, wait_for_completion_interruptible() returns -ERESTARTSYS and fastrpc_internal_invoke() moves every buffer from fl->mmaps onto cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk runs without holding fl->lock, the lock that serialises fl->mmaps in fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else. Take fl->lock around the move, matching every other fl->mmaps accessor. Fixes: 76e8e4ace1ed ("misc: fastrpc: Safekeep mmaps on interrupted invoke") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla

misc: fastrpc: Allow fastrpc_buf_free() to accept NULL

2026-07-01T20:53:13+00:00

Make fastrpc_buf_free() a no-op when passed a NULL pointer, allowing callers to avoid open-coded NULL checks. Reviewed-by: Dmitry Baryshkov Signed-off-by: Ekansh Gupta Signed-off-by: Jianping Li Signed-off-by: Srinivas Kandagatla

misc: fastrpc: Remove buffer from list prior to unmap operation

2026-07-01T20:38:57+00:00

fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support") Cc: stable@kernel.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Ekansh Gupta Signed-off-by: Jianping Li Signed-off-by: Srinivas Kandagatla

misc: fastrpc: Fix initial memory allocation for Audio PD memory pool

2026-07-01T20:38:57+00:00

The initial buffer allocated for the Audio PD memory pool is never added to the pool because pageslen is set to 0. As a result, the buffer is not registered with Audio PD and is never used, causing a memory leak. Audio PD immediately falls back to allocating memory from the remote heap since the pool starts out empty. Fix this by setting pageslen to 1 so that the initially allocated buffer is correctly registered and becomes part of the Audio PD memory pool. Fixes: 0871561055e66 ("misc: fastrpc: Add support for audiopd") Cc: stable@kernel.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Ekansh Gupta Signed-off-by: Jianping Li Signed-off-by: Srinivas Kandagatla

misc: fastrpc: Move prints outside spinlock in fastrpc_cb_probe

2026-06-29T20:04:12+00:00

dev_err() and dev_info() were called while holding a spinlock with IRQs disabled, which is incorrect as printk can be slow and should not be called in atomic context. Move the dev_err() for the FASTRPC_MAX_SESSIONS check to after the spinlock is released, and save the return value of of_property_read_u32() to print dev_info() after the lock is dropped. Minor variable style correction in probe function. Signed-off-by: Mukesh Ojha Reviewed-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla

Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2026-06-24T19:48:43+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked around a WiFi device defect; use a quirk or boot-time "pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas) - Always lift 2.5GT/s restriction in PCIe failed link retraining to avoid clamping a link to 2.5GT/s after hot-plug changes the device (Maciej W. Rozycki) - Request bus reassignment when not probe-only to fix an enumeration regression on Marvell CN106XX and possibly other DT-based systems (Ratheesh Kannoth) - Fix procfs race between pci_proc_init() and pci_bus_add_device() that resulted in 'proc_dir_entry ... already registered' warnings and pointer corruption (Krzysztof Wilczyński) - Fix sysfs race that causes 'duplicate filename' warnings and boot panics by converting PCI resource files to static attributes (Krzysztof Wilczyński) - Expose sysfs 'resourceN_resize' attributes only on platforms with PCI mmap (Krzysztof Wilczyński) - Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes (Krzysztof Wilczyński) - Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap path to match the generic path (Krzysztof Wilczyński) - Use kstrtobool() to parse the 'rom' attribute input to avoid the unexpected behavior of enabling the ROM when writing '0' with no trailing newline (Krzysztof Wilczyński) Resource management: - Improve resource claim logging for debuggability (Ilpo Järvinen) - Clean up several uses of const parameters (Ilpo Järvinen) - Check option ROM header signatures and lengths before accessing to avoid page faults and alignment faults (Guixin Liu) ASPM: - Don't reconfigure ASPM when entering low-power D-state; only do it when returning back to D0 (Carlos Bilbao) Power management: - During suspend, set power state to 'unknown' for all devices, not just those with drivers (Lukas Wunner) - Skip restoring Resizable BARs and VF Resizable BARs if device doesn't respond to config reads, to avoid invalid array accesses (Marco Nenciarini) - Add pci_suspend_retains_context() so drivers can tell whether devices retain internal state across suspend/resume, since some platforms reset devices on suspend; use this in nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam) Power control: - Only to power on/off devices that actually support power control to avoid poking at incompatible devices mentioned in DT (Manivannan Sadhasivam) Virtualization and resets: - Log device readiness timeouts as errors, not warnings, because the device is likely unusable in this case (Bjorn Helgaas) - Wait for device readiness after soft reset (D3hot -> D0uninitialized transition), when the device may respond with Request Retry Status (RRS) if it needs more time to initialize (Bjorn Helgaas) - Drop unnecessary retries when restoring BARs because resets should now already include all required delays (Lukas Wunner) - Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM terminates uncleanly (Jose Ignacio Tornos Martinez) - Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems, which seem not to support it correctly (Jose Ignacio Tornos Martinez) Peer-to-peer DMA: - Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g., s390 ISM BARs (Matt Evans) - Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner) Endpoint framework: - Add endpoint controller APIs for use by function drivers to discover auxiliary blocks like DMA engines (Koichiro Den) - Remember DesignWare eDMA engine base/size and expose them via the EPC aux-resource API (Koichiro Den) - Add endpoint embedded doorbell fallback, used if MSI allocation fails (Koichiro Den) - Validate BAR index and remove dead BAR read in endpoint doorbell test (Carlos Bilbao) - Unwind MSI/MSI-X vectors if NTB initialization fails part-way through (Koichiro Den) - Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it from hardirq context (Koichiro Den) - Call sleepable pci_epc_raise_irq() from a work item instead of atomic context, e.g., when setting bits in NTB peer doorbells in the ntb_peer_db_set() path (Koichiro Den) - Report 0-based vNTB doorbell vector to account for link event 0 and historically skipped slot 1 (Koichiro Den) - Prevent configfs writes to vNTB db_count and other values that are already in use after EPC attach (Koichiro Den) - Account for vNTB db_valid reserved slots (link event 0 and historically skipped slot 1) so they don't appear as valid doorbells (Koichiro Den) - Implement vNTB .db_vector_count()/mask() for doorbells so clients can use multiple vectors and avoid thundering herds (Koichiro Den) - Report 0-based NTB doorbell vector to account for link event 0 and historically skipped slot 1 (Koichiro Den) - Fix doorbell bitmask and IRQ vector handling to clear only specified bits, use the correct vector for non-contiguous Linux IRQ numbers, and validate incoming vectors (Koichiro Den) - Implement NTB .db_vector_count()/mask() for doorbells so clients can use multiple vectors (Koichiro Den) Native PCIe controller infrastructure: - Add pci_host_common_link_train_delay() for the mandatory delay after > 5GT/s Link training completes and use it for cadence HPA, j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang) - Protect root bus removal with rescan lock in altera, brcmstb, cadence, dwc, iproc, mediatek, plda, rockchip to prevent use-after-free or crashes when racing with sysfs rescan or hotplug (Hans Zhang) - Add pci_host_common_parse_ports() for use by any native driver to parse Root Port properties (per-Link features like width, speed, PHY, power and reset control, etc should be described in Root Port stanzas, not the host bridge; currently only reset GPIOs implemented) (Sherry Sun) New native PCIe controller drivers: - Add DT binding and driver for UltraRISC DP1000 PCIe controller (Xincheng Zhang, Jia Wang) Altera PCIe controller driver: - Do not dispose of the parent IRQ mapping, which belongs to the parent interrupt controller (Mahesh Vaidya) - Fix chained IRQ handler ordering issue and resource leaks on probe failure (Mahesh Vaidya) AMD MDB PCIe controller driver: - Assert PERST# on shutdown so any connected Endpoints are held in reset during shutdown (Sai Krishna Musham) Amlogic Meson PCIe controller driver: - Propagate devm_add_action_or_reset() failure to fix probe error path (Shuvam Pandey) - Add .remove() callback to deinitialize the host bridge and power off the PHY (Shuvam Pandey) Broadcom iProc PCIe controller driver: - Restore .map_irq() assignment; its removal broke INTx on the iproc platform bus driver (Mark Tomlinson) Broadcom STB PCIe controller driver: - No change, but products using certain WiFi devices may be affected by removal of CONFIG_PCIE_BUS_* (see above) Freescale i.MX6 PCIe controller driver: - Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset functions (Richard Zhu) - Assert PERST# before enabling regulators to ensure that even if power is enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun) - Parse reset properties in Root Port nodes (falling back to host bridge) to help support Key E connectors and the pwrctrl framework (Sherry Sun) - Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu) - Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu) - Integrate new pwrctrl API for DTs with Root Port-level power supplies (Sherry Sun) Intel Gateway PCIe controller driver: - Enable clock before PHY init for correct ordering (Florian Eckert) - Add .start_link() callback so the driver works again (Florian Eckert) - Stop overwriting the ATU base address discovered by dw_pcie_get_resources() (Florian Eckert) - Add DT 'atu' region since this is hardware-specific, and fall back to driver default if lacking (Florian Eckert) Loongson PCIe controller driver: - Ignore downstream devices only on internal bridges to avoid Loongson hardware issue (Rong Zhang) - Quirk old Loongson-3C6000 bridges that advertise incorrect supported link speeds (Ziyao Li) Marvell MVEBU PCIe controller driver: - Use fixed-width interrupt masks to avoid truncation in 64-bit builds (Rosen Penev) MediaTek PCIe controller driver: - Use FIELD_PREP() to fix incorrect operator precedence in PCIE_FTS_NUM_L0 (Li RongQing) - Fix IRQ domain leak when port fails to enable (Manivannan Sadhasivam) - Use actual physical address for MSI message address instead of virt_to_phys() (Manivannan Sadhasivam) - Add EcoNet EN7528 to DT binding (Caleb James DeLisle) MediaTek PCIe Gen3 controller driver: - Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms (PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang) - Add .shutdown() to assert PERST# before powering down device (Jian Yang) - Do full device power down on removal, including asserting PERST#, when removing driver (Chen-Yu Tsai) - Fix a 'failed to create pwrctrl devices' error message that was inadvertently skipped (Chen-Yu Tsai) NVIDIA Tegra194 PCIe controller driver: - Program the DesignWare PORT_AFR L1 entrance latency based on the 'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy) Qualcomm PCIe controller driver: - Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru) - Set max OPP during resume so DBI register accesses don't fail with NoC errors (Qiang Yu) - Add pci_host_common_d3cold_possible() to determine whether downstream devices are already in D3hot and wakeup-enabled devices are capable of generating PME from D3cold (Krishna Chaitanya Chundru) - Add .get_ltssm() callback to get the LTSSM status without DBI, since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya Chundru) - Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to avoid power leakage (Krishna Chaitanya Chundru) - Decide whether suspend should put the link in L2 and power down using pci_host_common_d3cold_possible() instead of checking whether ASPM L1 is enabled (Krishna Chaitanya Chundru) - Add qcom D3cold support to tear down interconnect bandwidth and OPP votes (Krishna Chaitanya Chundru) - Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in RP node while PERST# is in the RC node, but warn about the DT issue (Qiang Yu) - Program T_POWER_ON based on DT 't-power-on-us' property in case hardware advertises incorrect values (Krishna Chaitanya Chundru) - Disable ASPM L0s for SA8775P (Shawn Guo) - Initialize DWC MSI lock for firmware-managed ECAM hosts, which don't use the dw_pcie_host_init() path that initializes the lock (Yadu M G) Renesas RZ/G3S PCIe controller driver: - Add RZ/V2N DT support (Lad Prabhakar) SOPHGO PCIe controller driver: - Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao) Synopsys DesignWare PCIe controller driver: - Apply ECRC TLP Digest workaround for all DesignWare cores prior to 5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy) - Use common struct dw_pcie 'mode' rather than duplicating it in artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang) - Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce boilerplate and fix a seq_file memory leak by including a .release() callback (Hans Zhang) - Fix a signedness bug in fault injection test code (Dan Carpenter) - Avoid NULL pointer dereference when tearing down debugfs for controller that lacks RAS DES capability (Shuvam Pandey) MicroSemi Switchtec management driver: - Add Gen6 Device IDs (Ben Reed) Miscellaneous: - Remove unused gpio.h include from amd-mdb, designware-plat, fu740, visconti drivers (Andy Shevchenko) - Fix typos in documentation (josh ziegler) - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)" * tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits) PCI/sysfs: Use kstrtobool() to parse the ROM attribute input PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init() PCI/sysfs: Convert legacy I/O and memory attributes to static definitions PCI/sysfs: Add __weak pci_legacy_has_sparse() helper alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range() PCI: Add macros for legacy I/O and memory address space sizes PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files() alpha/PCI: Convert resource files to static attributes alpha/PCI: Add static PCI resource attribute macros alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits() alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs alpha/PCI: Use PCI resource accessor macros alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer alpha/PCI: Add security_locked_down() check to pci_mmap_resource() PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files() PCI/sysfs: Warn about BAR resize failure in __resource_resize_store() PCI/sysfs: Convert PCI resource files to static attributes PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device() ...