kernel/git/next/linux-next.git/drivers/net/ethernet/cirrus, branch master

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-05-14T17:08:06+00:00

Cross-merge networking fixes after downstream PR (net-7.1-rc4). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski

net: ethernet: cs89x0: remove stale CONFIG_MACH_MX31ADS reference

2026-05-12T13:28:22+00:00

The legacy ARM board file for MACH_MX31ADS was removed in commit c93197b0041d ("ARM: imx: Remove i.MX31 board files"), but a reference to it remained in the cs89x0 driver. Drop this unused code. Signed-off-by: Ethan Nelson-Moore Fixes: c93197b0041d ("ARM: imx: Remove i.MX31 board files") Link: https://patch.msgid.link/20260509023732.42256-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni

net: cs89x0: remove ISA bus probing

2026-05-01T23:46:53+00:00

The cs89x0 driver is really two in one, and they are mutually exclusive: - the ISA driver was used on 486-era PCs. It likely has no remaining users, like the other ethernet drivers that got removed in linux-7.1. The DMA support in here is the last device driver use of the deprecated isa_bus_to_virt() interface, all other users are either x86 specific or or got converted to the normal dma-mapping interface. The driver was maintained by Andrew Morton at the time, based on the linux-2.2 vendor driver from Cirrus Logic. - the platform_driver instance was used on some embedded Arm boards around the same time, such as the EP7211 Development Kit. This is the same chip, but uses modern devicetree based probing and no DMA. This was added by Alexander Shiyan. Remove the ISA driver as a cleanup, including all of the outdated documentation referring to its configuration. Cc: Andrew Morton Signed-off-by: Arnd Bergmann Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260429145624.2948432-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

net: ethernet: Switch back to struct platform_driver::remove()

2024-10-04T23:39:56+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski

net: cirrus: use u8 for addr to calm down sparse

2024-09-23T06:58:37+00:00

ep93xx_eth.c:805:40: sparse: sparse: incorrect type in argument 2 (different address spaces) ep93xx_eth.c:805:40: sparse: expected unsigned char const [usertype] *addr ep93xx_eth.c:805:40: sparse: got void [noderef] __iomem * Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202409212354.9CiUem7B-lkp@intel.com/ Fixes: 858555bb5598 ("net: cirrus: add DT support for Cirrus EP93xx") Signed-off-by: Nikita Shubin Acked-by: Alexander Sverdlin Signed-off-by: Arnd Bergmann

net: cirrus: add DT support for Cirrus EP93xx

2024-09-12T14:33:11+00:00

- add OF ID match table - get phy_id from the device tree, as part of mdio - copy_addr is now always used, as there is no SoC/board that aren't - dropped platform header Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Reviewed-by: Andrew Lunn Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Reviewed-by: Krzysztof Kozlowski Reviewed-by: Guenter Roeck Acked-by: Miquel Raynal Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann

net: ethernet: mac89x0: add missing MODULE_DESCRIPTION() macro

2024-06-20T00:22:00+00:00

With ARCH=m68k, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/cirrus/mac89x0.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240618-md-m68k-drivers-net-ethernet-cirrus-v1-1-07f5bd0b64cb@quicinc.com Signed-off-by: Jakub Kicinski

net: fill in MODULE_DESCRIPTION()s for ep93xxx_eth

2024-01-24T23:12:20+00:00

W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cirrus EP93xx ethernet driver. Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240123190332.677489-5-leitao@debian.org Signed-off-by: Jakub Kicinski

net: ethernet: cirrus: Convert to platform remove callback returning void

2023-09-20T08:06:38+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: David S. Miller

cirrus: cs89x0: fix the return value handle and remove redundant dev_warn() for platform_get_irq()

2023-08-02T19:10:39+00:00

There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. And there is no need to call the dev_warn() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie Reviewed-by: Simon Horman Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/20230801133121.416319-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski