kernel/git/next/linux-next.git/drivers/net/usb, branch stable

net: usb: lan78xx: disable VLAN filter in promiscuous mode

2026-07-07T11:07:51+00:00

The hardware VLAN filter (RFE_CTL_VLAN_FILTER_) drops VLAN-tagged frames whose VID has not been registered via lan78xx_vlan_rx_add_vid(). It is left enabled in promiscuous mode, so packet capture (e.g. tcpdump or Wireshark) does not see tagged frames for unregistered VIDs. Clear the filter while the interface is promiscuous and restore it from NETIF_F_HW_VLAN_CTAG_FILTER otherwise. Enforce the same condition in lan78xx_set_features() so netdev_update_features() cannot re-enable the filter while promiscuous. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Enrico Pozzobon Reviewed-by: Nicolai Buchwitz Link: https://patch.msgid.link/20260701-lan78xx-vlan-promisc-v3-1-232266d32743@dissecto.com Signed-off-by: Paolo Abeni

net: usb: net1080: validate packet_len before pad-byte access in rx_fixup

2026-07-03T06:23:23+00:00

For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading. Fixes: 904813cd8a0b ("[PATCH] USB: usbnet (4/9) module for net1080 cables") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260630045121.1565324-1-xmei5@asu.edu Signed-off-by: Paolo Abeni

usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()

2026-06-30T01:54:46+00:00

genelink_rx_fixup() splits an aggregated RX frame into its individual packets, using a per-packet length taken from device-supplied data. That length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared against how many bytes were actually received. A malicious GeneLink (GL620A) device can therefore send a short URB whose header claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size); then copies past the end of the receive buffer and hands the adjacent slab contents up the network stack, an out-of-bounds read that leaks kernel heap. No privilege is required: the path runs in the usbnet RX softirq as soon as the interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... skb_pull() already verifies that the requested length fits the buffer and returns NULL otherwise. Move it ahead of the copy and check its result, so a packet that overruns the received data is rejected before it is read. Well-formed frames, whose packets are fully present, are unaffected. Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260627205353.4000788-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski

net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()

2026-06-25T02:00:07+00:00

kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/178211531778.2216480.12637613349790980750@maoyixie.com Signed-off-by: Jakub Kicinski

net: usb: lan78xx: restore VLAN and hash filters after link up

2026-06-23T21:50:06+00:00

Configured VLANs intermittently stop receiving traffic after a link down/up cycle, e.g. when the network cable is unplugged and plugged back in. VLAN filtering stays enabled but all VLAN-tagged frames are dropped until a VLAN is added or removed again. The LAN7801 datasheet (DS00002123E) states: "A portion of the MAC operates on clocks generated by the Ethernet PHY. During a PHY reset event, this portion of the MAC is designed to not be taken out of reset until the PHY clocks are operational" (section 8.10, MAC Reset Watchdog Timer) "After a reset event, the RFE will automatically initialize the contents of the VHF to 0h." (section 7.1.4, VHF Organization) Thus a link down/up cycle stops and restarts the PHY clock, resets the PHY-clocked portion of the MAC, and the RFE clears its VLAN/DA hash filter (VHF) memory. The VHF holds both the VLAN filter table and the multicast hash table, but the driver never reprograms either from its shadow copy once the link is back, so both stay empty. Reprogram the VLAN filter and multicast hash tables on link up. Reported-by: Sven Schuchmann Closes: https://lore.kernel.org/netdev/BEZP281MB224501E38B30BFDC4BD3D364D9E32@BEZP281MB2245.DEUP281.PROD.OUTLOOK.COM/T/#u Tested-by: Sven Schuchmann Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nicolai Buchwitz Link: https://patch.msgid.link/20260622102911.484045-1-nb@tipi-net.de Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-06-11T21:33:35+00:00

Cross-merge networking fixes after downstream PR (net-7.1-rc8). Conflicts: drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c f67aead16e85 ("net: txgbe: rework service event handling") 57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices") net/rds/info.c 512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()") 6e94eeb2a2a6 ("rds: convert to getsockopt_iter") Adjacent changes: include/net/sock.h 1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs") f0de88303d5e ("net: make is_skb_wmem() available to modules") Signed-off-by: Jakub Kicinski

r8152: handle the return value of usb_reset_device()

2026-06-09T09:05:35+00:00

If usb_reset_device() returns a negative error code, stop the process of probing. Fixes: 10c3271712f5 ("r8152: disable the ECM mode") Signed-off-by: Chih Kai Hsu Reviewed-by: Hayes Wang Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260604092247.27158-450-nic_swsd@realtek.com Signed-off-by: Paolo Abeni

rndis_host: enable power management for Telit LE310X1

2026-06-05T01:10:56+00:00

Enable autosuspend support for Telit Cinterion LE310X1 RNDIS interface by selecting a driver_info variant with manage_power callback. This keeps power management scoped to the new Telit ID only, and avoids changing behavior for all existing RNDIS devices. Signed-off-by: Shaoxu Liu Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/tencent_B7686B84CD4B76D76BB912FA6367FAC2CA05@qq.com Signed-off-by: Jakub Kicinski

rndis_host: add Telit LE310X1 RNDIS USB ID

2026-06-05T01:10:56+00:00

Add a device match entry for Telit Cinterion LE310X1 RNDIS interface (VID:PID 1bc7:7030). This is a functional no-op and keeps using the generic rndis_info for now. Power-management behavior is handled in a follow-up patch. Signed-off-by: Shaoxu Liu Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/tencent_F1AF1F5AD39C56485BD16C6DB2415E5B9508@qq.com Signed-off-by: Jakub Kicinski

net: usb: qmi_wwan: add MeiG SRM813Q

2026-05-20T23:55:12+00:00

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module. The module can be put in different modes via AT commands to enable/disable GPS functionality: MODEM - PPP mode(2dee:4d63): AT+SER=1,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: MODEM If#= 3: AT P: Vendor=2dee ProdID=4d63 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms NMEA mode(2dee:4d64): AT+SER=51,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: NMEA If#= 3: AT P: Vendor=2dee ProdID=4d64 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Jan Volckaert Link: https://patch.msgid.link/20260517153237.55995-2-janvolck@gmail.com Signed-off-by: Jakub Kicinski