kernel/git/next/linux-next.git/drivers/thunderbolt/usb4.c, branch stable

thunderbolt: Increase timeout for Configuration Ready bit

2026-05-20T09:54:34+00:00

After setting the Configuration Valid bit (ROUTER_CS_5.CV), the USB4 Connection Manager guide specifies a 500 ms timeout for the router to set the Configuration Ready bit (ROUTER_CS_6.CR). The current timeout is shorter than specified. While there, fix the kernel-doc typo. Increase the timeout to match the CM guide recommendation. Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg

thunderbolt: Verify Router Ready bit is set after router enumeration

2026-05-20T09:54:34+00:00

The USB4 Connection Manager guide specifies that after enumerating a router, the Connection Manager shall verify that the Router Ready bit (ROUTER_CS_6.RR) has been set to ensure hardware configuration has completed. Currently, this step is missing from the enumeration sequence. Add this check to follow the Connection Manager guide more closely. Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg

thunderbolt: Verify PCIe adapter in detect state before tunnel setup

2026-05-20T09:54:34+00:00

The USB4 Connection Manager guide suggests that a PCIe downstream and PCIe upstream adapters of the USB4 router is in the Detect state before setting up a PCIe tunnel. Add this check by verifying the LTSSM field in ADP_PCIE_CS_0 before tunnel setup. Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg

thunderbolt: Fix typos in usb4.c

2025-11-17T07:24:24+00:00

Fix typos in usb4.c. No functional changes. Signed-off-by: Alan Borzeszkowski Signed-off-by: Mika Westerberg

thunderbolt: Update usb4.c function documentation

2025-09-17T05:33:00+00:00

Make usb4.c function documentation compliant with current kernel-doc standards. No functional changes. Signed-off-by: Alan Borzeszkowski Signed-off-by: Mika Westerberg

thunderbolt: Use string choices helpers

2025-08-26T05:59:41+00:00

Use string_choices.h helpers instead of hard-coded strings. Signed-off-by: Chelsy Ratnawat Signed-off-by: Mika Westerberg

thunderbolt: Fix wake on connect at runtime

2025-06-23T09:46:19+00:00

commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") fixated on the USB4 port sysfs wakeup file not working properly to control policy, but it had an unintended side effect that the sysfs file controls policy both at runtime and at suspend time. The sysfs file is supposed to only control behavior while system is suspended. Pass whether programming a port for runtime into usb4_switch_set_wake() and if runtime then ignore the value in the sysfs file. Cc: stable@vger.kernel.org Reported-by: Alexander Kovacs Tested-by: Alexander Kovacs Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg

thunderbolt: Expose usb4_port_index() to other modules

2025-04-17T09:21:45+00:00

Make usb4_port_index() available to other files in the driver, rename and add function documentation. Signed-off-by: Alan Borzeszkowski Reviewed-by: Heikki Krogerus Signed-off-by: Mika Westerberg

thunderbolt: Fix a logic error in wake on connect

2025-04-16T12:33:45+00:00

commit a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports") introduced a sysfs file to control wake up policy for a given USB4 port that defaulted to disabled. However when testing commit 4bfeea6ec1c02 ("thunderbolt: Use wake on connect and disconnect over suspend") I found that it was working even without making changes to the power/wakeup file (which defaults to disabled). This is because of a logic error doing a bitwise or of the wake-on-connect flag with device_may_wakeup() which should have been a logical AND. Adjust the logic so that policy is only applied when wakeup is actually enabled. Fixes: a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports") Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg

Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-11-29T19:19:31+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ...