kernel/git/next/linux-next.git/drivers/usb/phy/phy-tegra-usb.c, branch master

usb: phy: tegra: parametrize PORTSC1 register offset

2026-02-05T16:16:24+00:00

The PORTSC1 register has a different offset in Tegra20 compared to Tegra30+, yet they share a crucial set of registers required for HSIC functionality. Reflect this register offset change in the SoC config. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mikko Perttunen Link: https://patch.msgid.link/20260202080526.23487-5-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: parametrize HSIC PTS value

2026-02-05T16:16:24+00:00

The parallel transceiver select used in HSIC mode differs on Tegra20, where it uses the UTMI value (0), whereas Tegra30+ uses a dedicated HSIC value. Reflect this in the SoC config. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mikko Perttunen Link: https://patch.msgid.link/20260202080526.23487-4-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: return error value from utmi_wait_register

2026-02-05T16:16:24+00:00

Return exact error value from utmi_wait_register during HSIC power on. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mikko Perttunen Link: https://patch.msgid.link/20260202080526.23487-3-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: cosmetic fixes

2026-02-05T16:16:24+00:00

Change TEGRA_USB_HOSTPC1_DEVLC_PTS_HSIC to its literal value instead of using the BIT macro, as it is an enumeration. Correct the spelling in the comment and rename uhsic_registers_shift to uhsic_registers_offset. These changes are cosmetic and do not affect code behavior. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mikko Perttunen Link: https://patch.msgid.link/20260202080526.23487-2-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: add HSIC support

2026-01-23T16:18:11+00:00

Add support for HSIC USB mode, which can be set for second USB controller and PHY on Tegra SoC along with already supported UTMI or ULPI. Signed-off-by: Svyatoslav Ryhel Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: use phy type directly

2026-01-23T16:18:11+00:00

Refactor to directly use enum usb_phy_interface to determine the PHY mode. This change is in preparation for adding support for HSIC mode. Signed-off-by: Svyatoslav Ryhel Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Remove unused functions

2025-06-19T10:26:32+00:00

tegra_ehci_phy_restore_start() and tegra_ehci_phy_restore_end() last use was removed in 2013 by commit a4faa54e3aa2 ("USB: EHCI: tegra: remove all power management") tegra_usb_phy_preresume() and tegra_usb_phy_postresume() last use was removed in 2020 by commit c3590c7656fb ("usb: host: ehci-tegra: Remove the driver") (Although that one makes me wonder how much of the rest of the file is actually used) Remove both sets. Signed-off-by: "Dr. David Alan Gilbert" Link: https://lore.kernel.org/r/20250603203905.279307-1-linux@treblig.org Signed-off-by: Greg Kroah-Hartman

usb: Switch back to struct platform_driver::remove()

2024-10-04T13:13:03+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/usb to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman

usb: Explicitly include correct DT includes

2023-07-25T16:20:02+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Convert to platform remove callback returning void

2023-03-23T16:35:27+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230319092428.283054-11-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman