kernel/git/next/linux-next.git/lib/Kconfig, branch akpm-base

Merge branch 'mm-everything' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2022-06-28T06:54:05+00:00

# Conflicts: # include/linux/pagevec.h

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git

2022-06-27T23:13:31+00:00

lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing

2022-06-27T20:45:50+00:00

As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Reported-by: Linus Torvalds Acked-by: Dmitry Vyukov Cc: Marco Elver Cc: Alexander Potapenko Cc: Andrey Konovalov Signed-off-by: Andrew Morton

lib: Add register read/write tracing support

2022-06-15T15:41:12+00:00

Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors are typically used to read/write from/to memory mapped registers and can cause hangs or some undefined behaviour in following few cases, * If the access to the register space is unclocked, for example: if there is an access to multimedia(MM) block registers without MM clocks. * If the register space is protected and not set to be accessible from non-secure world, for example: only EL3 (EL: Exception level) access is allowed and any EL2/EL1 access is forbidden. * If xPU(memory/register protection units) is controlling access to certain memory/register space for specific clients. and more... Such cases usually results in instant reboot/SErrors/NOC or interconnect hangs and tracing these register accesses can be very helpful to debug such issues during initial development stages and also in later stages. So use ftrace trace events to log such MMIO register accesses which provides rich feature set such as early enablement of trace events, filtering capability, dumping ftrace logs on console and many more. Sample output: rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700 rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610 rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610 Co-developed-by: Sai Prakash Ranjan Signed-off-by: Prasad Sodagudi Signed-off-by: Sai Prakash Ranjan Acked-by: Steven Rostedt (Google) Signed-off-by: Arnd Bergmann

crypto: memneq - move into lib/

2022-06-12T06:51:51+00:00

This is used by code that doesn't need CONFIG_CRYPTO, so move this into lib/ with a Kconfig option so that it can be selected by whatever needs it. This fixes a linker error Zheng pointed out when CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m: lib/crypto/curve25519-selftest.o: In function `curve25519_selftest': curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq' curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq' Reported-by: Zheng Bin Cc: Eric Biggers Cc: stable@vger.kernel.org Fixes: aa127963f1ca ("crypto: lib/curve25519 - re-add selftests") Signed-off-by: Jason A. Donenfeld Reviewed-by: Eric Biggers Signed-off-by: Herbert Xu

lib: add generic polynomial calculation

2022-05-22T18:32:30+00:00

Some temperature and voltage sensors use a polynomial to convert between raw data points and actual temperature or voltage. The polynomial is usually the result of a curve fitting of the diode characteristic. The BT1 PVT hwmon driver already uses such a polynonmial calculation which is rather generic. Move it to lib/ so other drivers can reuse it. Signed-off-by: Michael Walle Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20220401214032.3738095-2-michael@walle.cc Signed-off-by: Guenter Roeck

crypto: add rocksoft 64b crc guard tag framework

2022-03-07T19:48:35+00:00

Hardware specific features may be able to calculate a crc64, so provide a framework for drivers to register their implementation. If nothing is registered, fallback to the generic table lookup implementation. The implementation is modeled after the crct10dif equivalent. Signed-off-by: Keith Busch Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org Signed-off-by: Jens Axboe

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2022-03-03T00:11:56+00:00

Pull ARM fixes from Russell King: - Fix kgdb breakpoint for Thumb2 - Fix dependency for BITREVERSE kconfig - Fix nommu early_params and __setup returns * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE ARM: Fix kgdb breakpoint for Thumb2

ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSE

2022-02-21T14:58:34+00:00

Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :) When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n] This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE. This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha Signed-off-by: Russell King (Oracle)

Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux

2022-01-23T04:20:44+00:00

Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly