kernel/git/next/linux-next.git/net/tls/tls_device.c, branch stable

tls: device: fix out-of-bounds write in tls_append_frag()

2026-08-25T08:04:02+00:00

Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Jiayuan Chen Link: https://patch.msgid.link/20260823084758.20936-1-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni

tls: device: push pending open record on splice EOF

2026-07-21T21:50:50+00:00

On kTLS device-offload sockets, sendfile() with count > EOF can reach ->splice_eof() with a fully assembled but still-open TLS record left pending. tls_device_splice_eof() only flushes partially sent records, so an abrupt close() can drop the final record and the peer receives a short file. Fix tls_device_splice_eof() to also push pending open records. This matches the software path, where splice EOF already flushes pending open records. Fixes: d4c1e80b0d1b ("tls/device: Use splice_eof() to flush") Link: https://lore.kernel.org/netdev/CAMPsyauZ+jzG9AysO0FWv6ZY0kvCUpjX_U7o=oOjCuOQ87BCgg@mail.gmail.com/ Reported-by: Nils Juenemann Signed-off-by: Rishikesh Jethwani Tested-by: Nils Juenemann Link: https://patch.msgid.link/20260709224436.1608993-2-rjethwani@purestorage.com Signed-off-by: Jakub Kicinski

net: tls: reshuffle the device ops check

2026-05-01T23:46:30+00:00

We try to validate during registration that the netdev has ops if it has features. This is currently somewhat sillily written because we have a dereference before a NULL check on the ops struct. Straighten this out. No functional change intended other than saving ourselves the very theoretical crash with a bad driver. Note that we check earlier in the function that either ops or TLS features are set for the device in question. Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260429213001.1908235-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-10-31T13:46:03+00:00

Cross-merge networking fixes after downstream PR (net-6.18-rc4). No conflicts, adjacent changes: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU") 26ab9830beab ("net: stmmac: replace has_xxxx with core_type") Signed-off-by: Jakub Kicinski

net: tls: Cancel RX async resync request on rcd_delta overflow

2025-10-30T01:32:18+00:00

When a netdev issues a RX async resync request for a TLS connection, the TLS module handles it by logging record headers and attempting to match them to the tcp_sn provided by the device. If a match is found, the TLS module approves the tcp_sn for resynchronization. While waiting for a device response, the TLS module also increments rcd_delta each time a new TLS record is received, tracking the distance from the original resync request. However, if the device response is delayed or fails (e.g due to unstable connection and device getting out of tracking, hardware errors, resource exhaustion etc.), the TLS module keeps logging and incrementing, which can lead to a WARN() when rcd_delta exceeds the threshold. To address this, introduce tls_offload_rx_resync_async_request_cancel() to explicitly cancel resync requests when a device response failure is detected. Call this helper also as a final safeguard when rcd_delta crosses its threshold, as reaching this point implies that earlier cancellation did not occur. Signed-off-by: Shahar Shitrit Reviewed-by: Sabrina Dubroca Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski

net/tls: support setting the maximum payload size

2025-10-27T23:13:42+00:00

During a handshake, an endpoint may specify a maximum record size limit. Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the maximum record size. Meaning that, the outgoing records from the kernel can exceed a lower size negotiated during the handshake. In such a case, the TLS endpoint must send a fatal "record_overflow" alert [1], and thus the record is discarded. Upcoming Western Digital NVMe-TCP hardware controllers implement TLS support. For these devices, supporting TLS record size negotiation is necessary because the maximum TLS record size supported by the controller is less than the default 16KB currently used by the kernel. Currently, there is no way to inform the kernel of such a limit. This patch adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that allows for setting the maximum plaintext fragment size. Once set, outgoing records are no larger than the size specified. This option can be used to specify the record size limit. [1] https://www.rfc-editor.org/rfc/rfc8449 Signed-off-by: Wilfred Mallawa Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com Signed-off-by: Jakub Kicinski

net: Allow opt-out from global protocol memory accounting.

2025-10-16T19:04:47+00:00

Some protocols (e.g., TCP, UDP) implement memory accounting for socket buffers and charge memory to per-protocol global counters pointed to by sk->sk_proto->memory_allocated. Sometimes, system processes do not want that limitation. For a similar purpose, there is SO_RESERVE_MEM for sockets under memcg. Also, by opting out of the per-protocol accounting, sockets under memcg can avoid paying costs for two orthogonal memory accounting mechanisms. A microbenchmark result is in the subsequent bpf patch. Let's allow opt-out from the per-protocol memory accounting if sk->sk_bypass_prot_mem is true. sk->sk_bypass_prot_mem and sk->sk_prot are placed in the same cache line, and sk_has_account() always fetches sk->sk_prot before accessing sk->sk_bypass_prot_mem, so there is no extra cache miss for this patch. The following patches will set sk->sk_bypass_prot_mem to true, and then, the per-protocol memory accounting will be skipped. Note that this does NOT disable memcg, but rather the per-protocol one. Another option not to use the hole in struct sock_common is create sk_prot variants like tcp_prot_bypass, but this would complicate SOCKMAP logic, tcp_bpf_prots etc. Signed-off-by: Kuniyuki Iwashima Signed-off-by: Martin KaFai Lau Reviewed-by: Shakeel Butt Reviewed-by: Eric Dumazet Acked-by: Roman Gushchin Link: https://patch.msgid.link/20251014235604.3057003-3-kuniyu@google.com

net: WQ_PERCPU added to alloc_workqueue users

2025-09-23T00:40:30+00:00

Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly request the use of the per-CPU behavior. Both flags coexist for one release cycle to allow callers to transition their calls. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. All existing users have been updated accordingly. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com Signed-off-by: Jakub Kicinski