| Age | Commit message (Collapse) | Author |
|---|
|
amd_stb_debugfs_open_v2() switches dev->msg_port to MSG_PORT_S2D to query
S2D telemetry but only restores it to MSG_PORT_PMC on one path. The early
return on the dump_custom_stb path (and the error/allocation returns) leave
the port stuck on MSG_PORT_S2D, so subsequent SMU communication - including
the s2idle prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored, mirroring the fix in amd_stb_s2d_init().
Reported-by: sashiko.dev
Link: https://sashiko.dev/#/patchset/20260717162023.956346-1-mario.limonciello%40amd.com
Fixes: 2851f4f8ed4e ("platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
dev->msg_port is switched to MSG_PORT_S2D before issuing the S2D SMU
commands but is only restored to MSG_PORT_PMC on the success path. The
early "return -EIO" and "return -ENOMEM" leave the port stuck on
MSG_PORT_S2D, so all subsequent SMU communication - including the s2idle
prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored.
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When processing unallocated space entries we didn't properly release the
inode bh. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
udf_read_inode() copies the on-disk lengthAllocDescs field of a USE
(unallocSpaceEntry) inode into iinfo->i_lenAlloc without checking that
it fits in the i_data buffer that is subsequently allocated for the
inode. udf_count_free_table(), called from udf_statfs(), then walks the
allocation descriptor array up to i_lenAlloc bytes, so a crafted UDF
image with lengthAllocDescs larger than (blocksize - sizeof(struct
unallocSpaceEntry)) causes udf_get_fileshortad() to read past the end
of the kmalloc'd i_data buffer.
KASAN report from mounting a crafted UDF image and calling statfs()
from an unprivileged process:
BUG: KASAN: slab-out-of-bounds in udf_get_fileshortad+0x126/0x130
Read of size 4 at addr ffff8880042137d8 by task poc/65
Call Trace:
dump_stack_lvl+0x53/0x70
print_report+0xce/0x610
kasan_report+0xce/0x100
udf_get_fileshortad+0x126/0x130
udf_current_aext+0x3c4/0xa10
udf_next_aext+0x241/0x440
udf_statfs+0xb7d/0x11c0
statfs_by_dentry+0x117/0x1e0
user_statfs+0xac/0x130
__do_sys_statfs+0x80/0xe0
do_syscall_64+0x102/0x5a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject USE inodes whose lengthAllocDescs would place descriptors past
the end of the i_data buffer, mirroring the checks the rest of the UDF
code performs on descriptor lengths.
This bug was discovered by Artiphishell's vTriage pipeline, which
generated a userspace reproducer that reliably triggers the KASAN
report on an unpatched kernel. The fix below was drafted with the
Claude coding assistant; a userspace reproducer (and the crafted UDF
image) is available on request.
Assisted-by: LLM
Signed-off-by: Jay Vadayath <jay@artiphishell.com>
Link: https://patch.msgid.link/20260717184021.13476-1-jay@artiphishell.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The drm_bridge.h header forward-declares struct edid, whose last usage
in the file was removed in commit 27b8f91c08d9 ("drm/bridge: remove
->get_edid callback"). Commit 11f6c4b1b259 ("drm/bridge: Add
connector-related bridge operations and data") then introduced usage of
struct drm_edid, without a corresponding forward declaration. Fix those
two issues by replacing the struct edid forward declaration with struct
drm_edid.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260703224143.3886069-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
After successfully configuring gpio pin as output, set the
requested initial output value via the existing gpio set
wrapper, so that the pin is not left at its previous level.
Fixes: 7671f4949a6c ("gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver")
Signed-off-by: Alex Tran <alex.tran@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260724-gpio-pinctrl-output-set-val-v2-1-cad55d025636@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Replace manual drm_bridge_remove()/mipi_dsi_detach() in remove with
devm_drm_bridge_add() and devm_mipi_dsi_attach() in probe. Also check
the return value from bridge registration.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260521215228.188615-2-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Replace manual drm_bridge_remove()/mipi_dsi_detach() in remove with
devm_drm_bridge_add() and devm_mipi_dsi_attach() in probe. Also check
the return value from bridge registration.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260521215228.188615-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The ICM USB4 switch operation request encodes two values in
request.data_len_valid: bit 4 marks the data payload valid, while bits
3:0 hold the payload length in dwords. A zero length with the valid bit
set represents the full 16-dword data array.
icm_usb4_switch_op() sets the valid bit when a transmit payload is
present. For payloads shorter than the full 16 dwords, it then assigns
the length to the whole field and clears the valid bit that was just set.
The payload is still copied into the request, but the descriptor sent to
firmware marks that data as invalid.
This affects USB4 router operations that send short payloads through the
firmware connection manager. In particular, USB4 NVM writes can send a
short final block when the image size is not aligned to the 64-byte proxy
payload size. Firmware may then ignore or reject that final block, while
full 16-dword blocks are unaffected because they are encoded as length 0
with the valid bit set.
OR the short payload length into data_len_valid so the valid bit is
preserved.
Fixes: 9039387e166e ("thunderbolt: Add USB4 router operation proxy for firmware connection manager")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The `pin_init::zeroed` function is a trivial wrapper around
`unsafe { core::mem::zeroed() }`, whereas `Zeroable::zeroed` is a trivial
wrapper around `pin_init::zeroed`. Mark them both as `#[inline]` to avoid
generating unnecessary symbols for them.
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
documentation
Modify the comments in the `pin_init::zeroed` and `Zeroable::zeroed`
functions to cross-reference each other and make developers aware of both
options.
This also adapts the example code in `Zeroable::zeroed` doc comments to use
that function.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CANiq72kdCAyRUmXFcqQfkHpk1miG8Gagsn0_5U8p4WpKxv9d_g@mail.gmail.com/
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
[ Fix link. - Gary ]
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
Attribute macros are invoked without cfg being resolved. This adds quite a
bit complexity to the macro because all of the macro needs to be careful to
attach necessary cfgs. This becomes especially tricky for tuple structs.
Thus, it is convenient if cfgs are all resolved like derive macros.
The most optimal way to handle this is via `TokenStream::expand_expr`, but
that is still unstable. We can also create an internal derive macro and
transform the attribute macro invocation to be derive macro, but doing
requires us to serialize all extracted information in a form of helper
attributes; it would also make it more difficult if we want to make changes
to the struct (which the self-reference feature would need).
Implement an approach where we generate two cfg-gated macro invocations
with cfg resolved within the invocation. This would mean when the loop
falls through, all field cfgs are resolved, so remove all handling of
cfg_attrs for the rest of the macro.
Signed-off-by: Gary Guo <gary@garyguo.net>
|
|
When a VRAM buffer object is marked as DONTNEED, like in Mesa, the
driver skips migrating its contents to system memory and instead purges
the backing store during eviction (via xe_ttm_bo_purge).
However, xe_evict_flags() still returns tt_placement (XE_PL_TT) for VRAM
BOs even if they were marked DONTNEED. This causes
ttm_bo_handle_move_mem() to always call ttm_bo_populate() to allocate
destination system pages, only for those pages to be immediately freed
right after when xe_bo_move() calls xe_ttm_bo_purge().
Fix this by changing xe_evict_flags() to return sys_placement
(XE_PL_SYSTEM) for DONTNEED BOs. This causes TTM to skip the population
step while still ensuring that TTM calls xe_bo_move(), so
xe_ttm_bo_purge() still triggers.
v2 (Thomas):
- Add a comment to highlight why sys_placement over purge_placement.
Assisted-by: Copilot:gemini-3.1-pro-preview
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260723161542.1220276-2-matthew.auld@intel.com
|
|
Replace ')' with ',' and add 'in' to sentence.
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Service drivers may register local XDomain properties while discovery is
still in progress. This can cause the properties changed notification to be
sent before the peer is ready to act on it.
If the peer has already read the local property block before the service
was registered, it may keep using the old property generation and miss the
newly registered service. With ThunderboltIP this can leave the network
service half-discovered after a warm reboot and the login request
eventually times out.
Queue another properties changed notification after the XDomain reaches
ENUMERATED so the peer can re-read the final local properties.
Signed-off-by: Milo Chen <cmh79479@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The usual style for other device id arrays doesn't have a comma after
the initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
tb_service_probe() calls the driver's probe function unconditionally.
Check at driver register time that this callback is valid to prevent a
NULL pointer exception.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
No driver makes use of that parameter, so drop it and don't spend the
effort to determine the matching entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On shutdown the connection manager tears down the router tree without
signalling connected devices. A Thunderbolt 3 device directly connected
to a USB4 host never receives a disconnect indication and during shutdown
this can cause polling the dead link for up to 60 seconds. On some
platforms this behavior leads to a warm reset instead of a shutdown due
to this timeout.
Fix this by asserting PORT_CS_19.DPR on each connected downstream port
before tearing down the router tree. This drives SBTX low (USB4 spec
section 6.9), causing the device to detect SBRX low and transition to
Uninitialized Unplugged state immediately.
Always do this on system shutdown/reboot by forcing host_reset in the
PCI ->shutdown callback. On plain driver unload only do it when the host
router was actually reset on load (host_reset=1), since in that case the
tunnels are not preserved across reload anyway; with host_reset=0 the
tunnels are kept alive across unload/reload so the links are left intact.
Restrict the reset to Thunderbolt 3 devices.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index.
Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group
ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly
to index its local group_reserved[] array.
The array currently has MAX_GROUPS entries, so its valid indices are 0
through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one
element past the end, and the final group's reserved bandwidth is not
included when the array is summed.
Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID
indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS.
Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The size passed to dma_unmap_page() must match the size used for the
corresponding dma_map_page() call.
Stream RX and TX buffers are mapped with TB_MAX_FRAME_SIZE when the
buffer pools are allocated. However, tbstream_ring_free() currently uses
tb_ring_frame_size() as the unmap size.
That helper returns the current frame payload size, not the DMA mapping
size. On the TX path, tbstream_dev_alloc_tx() stores a shorter payload
length in frame.size when the payload is smaller than TB_MAX_FRAME_SIZE.
This happens for a short final DATA frame, and also for the CLOSE frame,
which is allocated with SZ_256.
In those cases the buffer was mapped with TB_MAX_FRAME_SIZE, but
tb_ring_frame_size() returns the shorter frame payload length. This makes
the dma_unmap_page() size differ from the original dma_map_page() size.
Use TB_MAX_FRAME_SIZE when unmapping stream buffers so the unmap size
matches the DMA mapping size used by the buffer allocation paths.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Fixes: 6db21d817b43 ("thunderbolt: Add support for USB4STREAM")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The i.MX8QXP SCU clock driver manually attaches power domains to each
clock device via of_genpd_add_device() in imx_clk_scu_attach_pd().
If the SCU power domain provider has not probed yet, the attachment
fails silently with a pr_warn() and the clock device is registered
without a power domain.
When both drivers are built as modules, there is no implicit
dependency to guarantee load order. Add MODULE_SOFTDEP("pre:
scu_pd") so that modprobe loads the SCU power domain module
before the clock module.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Convert CONFIG_IMX_SCU_PD from bool to tristate to allow building as a
loadable module. This is needed on Android devices using the Generic
Kernel Image (GKI), where SoC-specific drivers must be built as modules
rather than built into the core kernel image.
For i.MX8Q devices running Android with a GKI kernel, the SCU power
domain driver must be loadable. Without tristate support, power domains
cannot be properly initialized, preventing these systems from
functioning under GKI.
Use subsys_initcall() so that when built-in the power domain provider
probes before its consumers (e.g. the SCU clock driver at
device_initcall level), fixing "failed to attached the power domain"
warnings at boot. When built as a module, subsys_initcall() is
equivalent to module_init(). No module_exit() is provided because the
SCU power domain provider is a system-level resource that cannot be
safely removed at runtime.
Add MODULE_DEVICE_TABLE() for OF-based module autoloading.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
of_stdout is declared extern in include/linux/of.h alongside of_root
and of_chosen, but unlike those two it is not exported, preventing
modules from referencing it.
Export it with EXPORT_SYMBOL_GPL() so drivers that need the stdout
device node can be built as modules.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
Fixes: c29345fa5f66 ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert the Kconfig option of every MediaTek pinctrl SoC driver from bool
to tristate and add MODULE_DESCRIPTION()/MODULE_LICENSE() so that they can
be built as loadable kernel modules.
This is required for Android GKI + vendor_dlkm deployments, where
vendor-specific drivers must be kept separate from the GKI vmlinux and
loaded as modules from the vendor partition.
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[linusw@kernel.org: Rebased and added MT6858]
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.3
- Add sound support for the RZ/G3E SoC and the RZ/G3E SMARC EVK board,
- Add more serial and SPI support for the RZ/G3L SoC and the RZ/G3L
SMARC EVK board,
- Add SMP support (32x Cortex-A720AE) for the R-Car X5H SoC,
- Add hwspinlock and mailbox (MFIS) support for the R-Car V4H SoC,
- Add GPU support for R-Car M3-N-based Salvator-X(S) and ULCB
development boards,
- Add SPI and FRAM support for the RZ/N1D SoC and the RZN1D Expansion
Board,
- Add PCIe support for the RZ/V2H SoC and the RZ/V2H EVK development
board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.3-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r9a09g047: Fix PCIe dma-ranges memory space code
arm64: dts: renesas: r9a09g056: Fix PCIe dma-ranges memory space code
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable PCIe
arm64: dts: renesas: r9a09g057: Add PCIe nodes
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Enable SPI-FRAM
ARM: dts: renesas: r9a06g032: Describe SPI controllers
arm64: dts: renesas: rzt2h-n2h-evk-common: Add memory nodes
arm64: dts: renesas: Add soc: labels to soc nodes
arm64: dts: renesas: r9a09g047e57-smarc: Add DA7212 audio codec support
arm64: dts: renesas: rzg3e-smarc-som: Add audio pinmux definitions
arm64: dts: renesas: rzg3e-smarc-som: Add Versa3 clock generator
arm64: dts: renesas: r9a09g047: Add RZ/G3E Sound support
arm64: dts: renesas: r8a77965-ulcb: Enable GPU support
arm64: dts: renesas: r8a77965-salvator-xs: Enable GPU support
arm64: dts: renesas: r8a77965-salvator-x: Enable GPU support
ARM: dts: renesas: r8a7740: Add FSI clocks
arm64: dts: renesas: r9a09g047: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a09g047e57-smarc: Drop SW_SER0_PMOD condition for rsci4
arm64: dts: renesas: r8a779g0: Add MFIS node
arm64: dts: renesas: r8a78000: Enable application CPU cores via PSCI
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DSI attach error path calls drm_panel_remove() by hand even though
the panel was registered with devm_drm_panel_add(), which already
arranges for drm_panel_remove() to run on driver detach. When
mipi_dsi_attach() fails the panel is therefore removed twice: once
directly and once again while devres unwinds.
drm_panel_add() takes a reference and drm_panel_remove() drops one, so
the extra removal releases the last reference early and frees the panel
container. The put registered by devm_drm_panel_alloc() then operates on
freed memory, resulting in a use-after-free and a reference-count
underflow when a DSI host rejects the requested configuration during
probe.
Drop the manual drm_panel_remove() and let the managed cleanup handle
it, matching the other dual-DSI panel drivers.
Fixes: 75a5dbd1f4f7 ("drm/panel: Add Novatek NT36536 panel driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260724041746.12887-1-devnexen@gmail.com
|
|
Add support for the Ampire AM-800480N3TZQW-00H 5" WVGA TFT LCD panel.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-support-am-800480n3tzqw-00h-v1-2-6a4ae0575a19@bootlin.com
|
|
Add compatible for the AM-800480N3TZQW-00H from Ampire Co. Ltd.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-support-am-800480n3tzqw-00h-v1-1-6a4ae0575a19@bootlin.com
|
|
Add support for the lower (secondary) panel of the AYANEO Pocket DS, a
dual-screen QCS8550 (Snapdragon 8 Gen 2) handheld. It is a 5.0" 1024x768
4:3 IPS LCD driven by a Sitronix ST7703 DDIC: every command in the vendor
init sequence maps to an ST7703 manufacturer command (SETEXTC, SETMIPI,
SETRGBIF, SETSCR, SETPOWER, SETGAMMA, SETGIP1/2), and the SETMIPI and
SETRGBIF payloads are near-identical to the already-supported Powkiddy
RGB10MAX3.
The panel is mounted in portrait (768x1024) and rotated 270 degrees in
the device, expressed through the panel rotation property. The SETEXTC
unlock password ends in 0x87 rather than the canonical 0x83; this is the
value shipped by the vendor firmware and is kept verbatim.
Init sequence extracted from the AYANEO Pocket DS BSP kernel, via the
ROCKNIX SM8550 port.
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-b4-st7703-pocketds-lower-v1-2-e3db246589f4@gmail.com
|
|
The lower (secondary) 5.0" 1024x768 IPS LCD panel of the AYANEO Pocket DS
dual-screen handheld is driven by a Sitronix ST7703 DDIC, as identified
by its ST7703 manufacturer command set (SETEXTC 0xB9, SETMIPI 0xBA,
SETGIP1/2 0xE9/0xEA). Document its compatible alongside the other ST7703
panels.
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-b4-st7703-pocketds-lower-v1-1-e3db246589f4@gmail.com
|
|
The DCLTek dt300250 is a LCD panel using the jd9365da controller.
Add the panel to the driver.
Suggested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-5-marc-olivier.champagne@savoirfairelinux.com
|
|
The DCLTek dt300250 is a panel using the jadard-jd9365da controller.
Add a new compatible for it.
Suggested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-4-marc-olivier.champagne@savoirfairelinux.com
|
|
Add DCL Technologies Inc. (DCLTEK) to the devicetree vendor prefixes
registry.
Link: https://www.dcltek.com/
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-3-marc-olivier.champagne@savoirfairelinux.com
|
|
The JD9365DA-H3 uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.
Suggested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-2-marc-olivier.champagne@savoirfairelinux.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
AH6 rearranges routing-header addresses before computing or verifying the
ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than
the number of addresses described by the routing header's hdrlen field.
That assumption does not hold for raw IPv6 HDRINCL packets. A packet with
hdrlen equal to 2 describes one address, but can carry an arbitrary
segments_left value. With segments_left equal to 255, the function moves
its address pointer 4,064 bytes backwards and passes a 4,064-byte length to
memmove(), resulting in an out-of-bounds access.
Validate the invariant locally before modifying the routing header or
performing any address-pointer arithmetic, and propagate malformed-header
errors to the existing AH6 input and output error paths.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
https://github.com/vzapolskiy/linux-lpc32xx into soc/arm
ARM: nxp: lpc32xx: ARM changes for v7.3
NXP LPC32xx ARM changes for v7.3 contain:
- Karl Mehltretter fixes a multiplatform kernel runtime execution by
limiting LPC32xx SoC specific init functions to be run on this
platform only,
- a stale method of populating DMA, SLC and MLC NAND controllers is
removed from platform code, this change was announced to happen by
the end of this year, all touched by the change controllers are
properly described in the platform device tree for years, and very
old board dtbs are recommended to be updated.
* tag 'lpc32xx-arm-for-7.3' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: lpc32xx: remove a few manually populated OF devices
ARM: lpc32xx: only run SoC init on LPC32xx hardware
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
FOLL_LONGTERM pinning fails for some memory types, such as file-backed
guest memory. As a result, kvm_s390_adapter_map() returns -EINVAL and
irqfd adapter registration fails even though interrupt delivery could
still work via the existing non-atomic path.
When FOLL_LONGTERM pinning fails, verify that the page is accessible
using a short-term pin instead. If the short-term pin succeeds, unpin
the page and add a map entry with pinned=false to preserve MAP/UNMAP
symmetry. The non-atomic irqfd path already performs short-term pinning
for interrupt delivery, so this restores the previous behavior for
memory that cannot be pinned long-term.
get_map_info() is updated to return NULL for unpinned entries so that
the atomic irqfd fast path falls back to the non-atomic path.
kvm_s390_adapter_unmap() and kvm_s390_unmap_all_adapters() skip dirty
marking and unpin for unpinned entries.
Update Documentation/virt/kvm/devices/s390_flic.rst to reflect the
new MAP/UNMAP behavior.
Fixes: c9a568838086 ("KVM: s390: Add map/unmap ioctl and clean mappings post-guest")
Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com>
Reviewed-by: Douglas Freimuth <freimuth@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
New HW no longer implements a separate class for latency-sensitive QPs and
advertises this by a new cap bit.
REG_UMR is the only QP that used this feature, so gate its usage of the
feature on this cap.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-2-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
We need the staging driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the required DT nodes for both QSPI controllers.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20260709112006.390742-6-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the qp_latency_sensitive_disable capability bit to indicate
that the device no longer implements a separate class for
latency-sensitive QPs, so drivers can stop programming the
latency_sensitive QPC field and skip allocating the dedicated
fast-path bfreg on such HW.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-1-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
