| Age | Commit message (Collapse) | Author |
|---|
|
The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260717143119.1815106-3-johan@kernel.org
|
|
Make sure to drop the i2c adapter reference on probe failure (e.g.
probe deferral) and on driver unbind also if a devicetree redundantly
uses the 'ddc-i2c-bus' property to point to the aux ddc bus.
Fixes: cc5a3fc041f0 ("drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDC")
Cc: stable@vger.kernel.org # 5.15
Reported-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/CAD=FV=VZPhzHU+Pet2m3L+Pqc7mOPfZC-f5p0OuNL79wNZPxRg@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260717143119.1815106-2-johan@kernel.org
|
|
For the PCIE_PHY (also called PEXTP_PHY) type of RTFF hardware,
there is special handling setting CLK_DIS before performing the
NRESTORE sequence for resetting the RTFF and start sequencing
from a clean state.
That special handling, though, poses an issue in case the machine
specific bootchain (bootloader in particular) ends up booting the
kernel with both PCIe MAC and PHY enabled (not just power domains)
as doing so will partially corrupt the PCIe MAC/PHY registers in
an unpredictable manner, producing either an initialization fail
in the PCI-Express drivers, or even a hard lockup!
Resolve this by simply removing the special handling: in this case
the bootchain, or remote processors, setting is getting honored by
the later check for PWR_RTFF_SAVE_FLAG presence in the RTFF ctl
register.
Fixes: 9d02c94342b3 ("pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add support for the power domains found in the MediaTek MT6858 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
On recent MediaTek SoCs such as MT6858, the kernel is required to use
a secure monitor call (SMC) to enable or disable the modem power domain.
The power domain control register can be read, but firmware prevents it
from being modified directly. Some other parts of the power sequence,
such as setting the ext_buck_iso register, still need to be performed on
the kernel side.
In preparation for modem support, add a flag to enable this new power
sequence for SoCs that need it. Power domains using this flag are not
expected to configure any bus protection registers, since these are
handled internally by the SMC call.
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Add a new compatible and document bindings for the power domain
controller of the MT6858 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
The RK3568 NPU rail (vdd_npu) needs to be enabled before the domain is
powered on and disabled after it is powered off. Give DOMAIN_RK3568 a
regulator parameter (like DOMAIN_RK3588 already has) so the NPU domain
can set need_regulator, letting genpd manage the rail wired up as the
domain's domain-supply instead of marking it always-on in DT.
Suggested-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Midgy BALON <midgy971@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
This line was lost when cping from amd-staging-drm-next to drm-fixes.
So add it back.
Cc: stable@vger.kernel.org
Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock")
Reported-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260723134450.13838-1-sunpeng.li@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Prevent unbounded recursion in free path with memory allocation
profiling, which has caused a stack overflow on a Meta production
host due to a 125-deep __free_slab<->kfree recursion (Harry Yoo)
- Fix type-based partitioning confusing sparse which does not know
__builtin_infer_alloc_token() (Marco Elver)
- Fix a potential memory leak in bulk freeing path on NUMA machines
(Shengming Hu)
* tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: silence sparse warning with type-based partitioning
mm/slab: prevent unbounded recursion in free path with new kmalloc type
lib/alloc_tag: introduce mem_alloc_profiling_permanently_disabled()
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
mm/slab: fix a memory leak due to bootstrapping sheaves twice
mm/slub: fix lost local objects when bulk remote free batch fills
|
|
The vblank on/off callbacks mixed use of amdgpu_irq_get/put() and
amdgpu_dm_crtc_set_vupdate_irq() to enable and disable IRQs.
With get/put, base driver will callback into DC to disable IRQs when
refcount == 0. With set_vupdate_irq(), DC is called directly to disable
IRQs, bypassing base driver's refcount tracking.
During gpu reset, base driver can restore IRQs via
amdgpu_irq_gpu_reset_resume_helper() > amdgpu_irq_update(). So if
get/put() is not used (i.e. refcount == 0), then vupdate_irq will be
disabled.
This is problematic if DRM requests vblank on before amdgpu_irq_update()
is called: drm_vblank_on() > set_vupdate_irq() enables vupdate_irq, but
the refcount is still 0. gpu_reset_resume_helper() > irq_update() then
immediately disables it, thus leading to flip done timeouts.
This is made worse on DCN since VUPDATE_NO_LOCK is the only IRQ enabled.
Prior to 8382cd234981, a combination of GRPH_FLIP and VSTARTUP IRQs were
used, and they used get/put(). This explains why 8382cd234981 exposed
this issue.
Fix by using get/put() instead of set_vupdate_irq(). DCE is unchanged,
since it relies on unbalanced enable/disable calls based on VRR status,
and hence requires direct set_vupdate_irq(). Plus, it also uses
GRPH_FLIP and VLINE IRQs, which are properly tracked by get/put().
Cc: stable@vger.kernel.org
Fixes: 8382cd234981 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260723180159.52121-1-sunpeng.li@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial fixes for 7.2-rc4
Here are some fixes for 7.2:
- fix data loss on keyspan_pda throttle
- fix memory corruption with malicious edgeport devices
- fix memory corruption with corrupt io_ti firmware
- fix OOB read with corrupt mxuport firmware
Included are also some new ftdi and modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.2-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: io_edgeport: cap received transmit credits
USB: serial: option: add TDTECH MT5710-CN
USB: serial: io_ti: reject oversized boot-mode firmware
USB: serial: mxuport: validate firmware header size
USB: serial: ftdi_sio: add support for E+H FXA291
USB: serial: keyspan_pda: fix data loss on receive throttling
|
|
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global list entry in reverse setup order on
the corresponding failure paths.
Fixes: 42df43b36163 ("iommu/msm: Make use of iommu_device_register interface")
Cc: stable@vger.kernel.org
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Weimin Xiong <xiongwm2026@163.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The OF translation path appends each unique stream ID from an IOMMU
specifier to the fixed mids array in the per-master object. It currently
has no capacity check before storing at mids[num_mids] and incrementing
num_mids.
Return -ENOSPC when the array is full rather than writing the next ID
beyond it.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
subdevice ID
The WCN6855 and WCN7851 combo chips are available in M.2 card variants
that differ by their BT interface: some expose BT over UART while others
expose BT over USB. Both variants use the same PCIe device ID for the
WiFi interface, distinguished only by their sub-system device ID.
The bare PCI_DEVICE() entries match all sub-system IDs, so both UART and
USB variants hit the same table entry and trigger UART serdev creation.
For USB variants this is wrong — there is no UART BT interface on such
a card, and the serdev probe will fail.
Narrow the matches to UART variants only by using PCI_DEVICE_SUB with
their respective sub-system IDs, so USB variants no longer trigger
UART serdev creation.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724-hamoa-m2-sub-id-v2-v3-1-af97de70bbbe@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Convert 2 "/**" comments to use plain C "/*" comment style to avoid
kernel-doc warnings:
Warning: include/uapi/linux/capability.h:114 expecting prototype for
POSIX(). Prototype was for CAP_CHOWN() instead
Warning: include/uapi/linux/capability.h:175 expecting prototype for
Linux(). Prototype was for CAP_SETPCAP() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
|
|
The Razer Barracuda X 2.4 GHz USB headset dongle (0x1532:0x0552)
reports a minimum volume register value of cval->min = -16800.
In UAC 1/256 dB units, -16800 corresponds to -65.625 dB. However,
stock ALSA misinterprets this raw integer as 1/100 dB units
(-168.00 dB), causing user-space audio servers (PipeWire /
PulseAudio) to map their volume curves against an incorrectly wide
range.
Add an explicit usbmix_dB_map entry overriding Unit 2 to -6562
(-65.62 dB) to accurately report the physical hardware
attenuation bounds.
Signed-off-by: Markus Lindner <lindner.markus@outlook.at>
Link: https://patch.msgid.link/AS8P195MB2142F4EFF83980BD02BA6566E1C12@AS8P195MB2142.EURP195.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for querying and switching the graphics MUX mode on HP
systems via WMI. This introduces the 'gpu_mux_mode' sysfs attribute
under the hp-wmi platform device, allowing userspace tools to check
and safely switch between available graphics modes (e.g., UMA, Hybrid,
Discrete).
The hardware capabilities mask is primarily read using the modern
128-byte System Design Data query. However, to ensure backward
compatibility with older models, a fallback mechanism is implemented.
By mirroring the behavior of the Windows Omen Gaming Hub software, if
the modern query fails but the MUX WMI endpoint (0x52) responds
successfully to a read request, the driver defaults to a standard
Hybrid + Discrete support mask (0x06).
Signed-off-by: Kürşat Abaylı <hello@kursatabayli.dev>
Link: https://patch.msgid.link/20260723172734.18361-1-hello@kursatabayli.dev
[ij: add kstrtox.h]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ntfs_utf16_to_nls() appends a trailing NUL to the converted output,
but it passes the caller-supplied size directly to the conversion loop.
For the UTF-8 path, utf16s_to_utf8s() can legitimately fill all
buf_len bytes and return buf_len, after which ntfs_utf16_to_nls()
writes the terminator one byte past the end of the destination buffer.
The same contract problem exists for the NLS path when a converted
character consumes the last available byte.
Reserve one byte for the terminator before doing either conversion.
The function continues to return the number of converted bytes,
excluding the NUL terminator.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
attr_wof_frame_info() may reuse a cached offsets folio. In that case the
loop can fill the output offsets without calling attr_load_runs_range()
or ntfs_read_run(), leaving err uninitialized before the common return
path. Initialize err to 0 for the successful cached path.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
When CONFIG_NTFS3_64BIT_CLUSTER is enabled, sbi->maxbytes_sparse is set
to -1. As a signed loff_t this is -1LL, the most negative value. Any
lseek on a sparse or compressed file passes this as maxsize to
vfs_setpos(), which returns -EINVAL whenever offset > maxsize, and
since -1LL is less than any non-negative offset, every seek fails,
including lseek(fd, 0, SEEK_SET).
The intent of -1 here appears to be "no limit" (matching the spirit of
MAX_LFS_FILESIZE assigned to sbi->maxbytes and sb->s_maxbytes in the
same block), but the signed type makes it the minimum instead of the
maximum.
Fix by assigning MAX_LFS_FILESIZE to sbi->maxbytes_sparse in the
64-bit cluster path, consistent with the other two limits set there.
Observed on a 16 TB NTFS volume with 0xFFFFFEFF total clusters compiled
with CONFIG_NTFS3_64BIT_CLUSTER=y. Sequential reads via dd/cp worked
correctly; any lseek call on sparse files returned EINVAL, preventing
archive managers and other tools from random-accessing files on the
volume. The non-64-bit-cluster path correctly sets maxbytes_sparse to
(1ull << (cluster_bits + 32)) - 1, a large positive value.
Signed-off-by: Senjin <senjin@hatchling.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
When $MFT's ATTR_BITMAP attribute is heavily fragmented, its run list
can span multiple MFT extension records (attribute list entries with
vcn > 0). The non-primary segment handler in ntfs_read_mft() only
processed ATTR_DATA extension segments for MFT_REC_MFT, silently
skipping any ATTR_BITMAP segments. This left sbi->mft.bitmap.run
incomplete, causing wnd_init() to fail with -ENOENT when wnd_rescan()
tried to look up a VCN not covered by the truncated run list.
Observed on a 16 TB NTFS volume (0xFFFFFEFF total clusters) whose MFT
bitmap run list was split across 97 extents in extension records.
wnd_rescan() successfully looked up VCNs 0-122 from the runs loaded
from the base record, then failed at VCN 123 (the last cluster of the
bitmap) whose run was only present in an extension record.
Fix by extending the MFT_REC_MFT special case to also handle
ATTR_BITMAP extension segments, storing their runs into
sbi->mft.bitmap.run the same way the primary segment does.
Signed-off-by: Senjin <senjin@hatchling.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Hard to say about copy_to_user_iter(), but at least the first splat
looks correct. At the end of fill_name_de(), data layout is:
struct NTFS_DE *e = buf;
...
|<- data_size + sizeof(struct NTFS_DE) ->|<- XXX ->|
buf |-----------------------------------------------------------
|<- ALIGN(data_size, 8) + sizeof(struct NTFS_DE) ->| ;; e->size
If 'buf' was allocated with kmalloc(), XXX remains uninitialized and
passed as such to memcpy() called from hdr_insert_de().
So using kzalloc() for all buffers passed to fill_name_de() looks
the simplest and most safe solution. OTOH if someone would have
said that an overhead of PAGE_SIZE'd memset() is too large, more
fine-granted solution is to memset() XXX only.
Reported-by: syzbot+905d785c4923bea2c1db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=905d785c4923bea2c1db
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
ntfs_dir_emit() skips index entries whose fname does not fit in e->size,
but ntfs_dir_count() still accepted them via de_get_fname() alone.
dir_is_empty() can then disagree with readdir: a malformed directory
appears empty in ls while rmdir fails with ENOTEMPTY.
Factor the fname/key bounds check into de_fname_fits() and use it from
ntfs_dir_emit() and de_countable_fname() so count/readdir share the same
entry acceptance rules.
Signed-off-by: Xixin Liu <liuxixin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
ntfs_reparse_init() and ntfs_objid_init() parse the index root of the
$Extend/$Reparse and $Extend/$ObjId metafiles (the INDEX_ROOT attributes
named $R and $O). They read its type and rule fields through
resident_data(), which does not check that the resident attribute is
large enough to hold them.
mi_enum_attr() accepts a resident attribute with data_off == asize and
data_size == 0. For such an attribute placed last in its MFT record,
resident_data() returns a pointer to the end of the record_size buffer,
so reading root->type / root->rule reads past the allocation.
Use resident_data_ex(attr, sizeof(struct INDEX_ROOT)) and bail out when
it returns NULL, as ntfs_security_init() already does for $SDH / $SII.
The attribute is only parsed while mounting a crafted image, so this
needs CAP_SYS_ADMIN.
BUG: KASAN: slab-out-of-bounds in ntfs_reparse_init (fs/ntfs3/fsntfs.c:2306)
Read of size 4 at addr ffff88801219dc00 by task mount
ntfs_reparse_init (fs/ntfs3/fsntfs.c:2306)
ntfs_fill_super (fs/ntfs3/super.c:1604)
get_tree_bdev_flags (fs/super.c:1703)
vfs_get_tree (fs/super.c:1758)
path_mount (fs/namespace.c:4131)
__x64_sys_mount (fs/namespace.c:4360)
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Wu <weiming3@asu.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
As per Documentation/process/deprecated.rst, open-coded kmalloc
assignments for struct objects are deprecated. Replace
kzalloc(sizeof(*ptr), GFP_KERNEL) with kzalloc_obj() and
kvmalloc_array(n, sizeof(*ptr), GFP_KERNEL) with kvmalloc_objs()
in ip_vs_rht_alloc().
Compile tested with CONFIG_IP_VS=y and runtime tested using
tools/testing/selftests/net/netfilter/ipvs.sh on x86_64/QEMU.
Signed-off-by: Subasri S <subasris1210@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Store the event cache in the expectation instead of accessing the
exp->master cache, as a step forward towards turning the exp->master
into a cookie.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pass master conntrack as argument to helper functions that parse the
packet payload, instead of using exp->master. Although accessing
exp->master is safe in this case because it refers to the master
conntrack in used by this skb, remove it to step towards turning the
exp->master field into a cookie value.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Some facilities have been put into FACILITIES_KVM_CPUMODEL to be on the
safe side with older VMMs. Unfortunately this has some unwanted side
effects for VMMs without a CPU model (like kvm unit test) and IBC/VAL is
not used in that case.
Ideally the guest visible STFLE bits, the behaviour when running
interpreted (HW supported) and the behaviour when running emulated (kvm
or qemu) should be in sync.
For LPSWEY this was not the case. STFLE.193 was off, but interpretion
did work, emulation did not. As emulation only happened in rare cases
(e.g. deliver a machine check) the result was inconsistency for the
guest.
Move beareh to FACILITIES_KVM to fix the inconsistency.
NNPA (facility 165) has no fencing and no KVM emulation. The instruction
will work, despite STFLE.165 being off in the guest. Move also to
FACILITIES_KVM.
Facility 170 (ineffective-nonconstrained-transaction facility) is an
anti facility and should be passed along as well as KVM cannot simulate
the missing function.
KVM also does not implement trapping for guest RDP and there is no
additional hypervisor control. Move 194 to FACILITIES_KVM as well.
Facilities 196 and 197 (PAI) also do not have a hypervisor control and
need to be passed on as well.
The PFCR is also not intercepted by KVM and needs to be moved (stfle.201).
The other facilities are fine (stfle, emulation, interpretion in sync):
Both AP related features (12 and 15) require a userspace added AP via vfio.
156 etoken facility is fenced off for interpretion via ECD_ETOKENF so
everything is in sync
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
|
|
The panel is Microtips Technology USA MF-101HIEBCAF0[1]. It is a
Dual-Link LVDS panel and supports WUXGA resolution (1920x1200).
Furthermore, it has an i2c based touch controller: Ilitek-ILI2511.
Add DT overlay for the OLDI Panel.
[1]: https://www.ti.com/tool/SK-LCD1
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20260723073341.3229436-1-s-jain1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
Currently if kvm_zpci_set_airq() fails, kvm_s390_pci_aif_enable() returns
the error code but doesn't do any resource cleanup thus leaking resources.
Fix this by cleaning up all the resources such as the GAITE, AIBV, AISB and
unpinning any pinned pages. While at it, remove dead code that stored FIB
values that were never referenced.
As part of the cleanup, we are also holding the aift_lock a bit longer, as
we hold the lock while executing the MPCIFC instruction. Though this is not
strictly necessary, it means we don't have to drop and re-acquire in the
error case.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
In kvm_s390_pci_aif_enable() two error paths failed to set an error code,
causing the function to return 0 on failure. It also failed to rollback
memory accounting on failure. Fix both by propagating an error code on
failure and calling unaccount_mem() in the cleanup path.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
[borntraeger@linux.ibm.com: Fixed whitespace]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
In case of route updates, tear down flow entries with stale dst to give
them a chance to obtain a fresh route.
This is specifically useful for hardware offloaded entries, where the
flowtable software dataplane sees no packet, where the existing check
for stale dst entries does not help.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details?
Fixes: c978cd3a9371 ("[NETFILTER]: nf_nat_sip: translate all Contact headers")
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
|
|
sashiko reports:
Is it intentional that the new parameter validation callback is applied
only to the NFPROTO_IPV4 match?
Fixes: 68fc6c6470d6 ("netfilter: xt_tcpmss: add checkentry for parameter validation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The flags passed to the pick-idle kfuncs are values from the
scx_pick_idle_cpu_flags enum, whose members are prefixed
SCX_PICK_IDLE_ (SCX_PICK_IDLE_CORE, SCX_PICK_IDLE_IN_NODE).
Three kernel-doc comments in idle.c erroneously used
%SCX_PICK_IDLE_CPU_* which does not correspond to any defined flag
name, while the adjacent scx_bpf_pick_idle_cpu_node() correctly
documents %SCX_PICK_IDLE_*.
Fix the three occurrences to use the correct SCX_PICK_IDLE_* prefix.
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
|
|
The cgroup-v2 documentation describes memory.pressure and io.pressure as
"read-only nested-keyed file", but both files accept trigger writes
(cgroup_memory_pressure_write / cgroup_io_pressure_write) and are therefore
read-write. cpu.pressure and irq.pressure are already documented as
read-write, so this also resolves an internal inconsistency.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
From xe2_lpd+ platforms, enabling FBC do not depend on the
surface size. So remove the check.
v2: changes to patch description
Bspec: 69560
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260722132448.318112-3-vinod.govindapillai@intel.com
|
|
In xe2_lpd+ platforms, there are no restrictions to enable FBC
on planes with respect to the plane width - width can be as per
the platform's maximum supported resolution.
v2: patches squashed and changes in patch descriptions
Bspec: 69560
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260722132448.318112-2-vinod.govindapillai@intel.com
|
|
Enabling features like FBC on platforms may depend on a plane's
maximum supported resolutions or some other arbitrary constant
values because of hw restrictions. Currently the helpers that
report a plane's max width and height are private to skl_plane
/ skl_universal_plane. Change the scope to golbal so that
this can be queried from other areas as well.
v2: function parameter alignment fixes
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260722132448.318112-1-vinod.govindapillai@intel.com
|
|
On EAECIS NL60R with EC firmware version 1.11, resuming from S3 has a
very high chance (>90%) of causing the EC to lose the previous backlight
power state. When this happens, the laptop resumes normally from S3, but
the backlight remains off (when shining on the screen with a flash light,
we can see the screen contents are updating normally).
Since there is no generic way to query the EC's backlight state on
Loongson laptop platforms, assume the worst-case scenario and restart
the backlight power inside the kernel each time the system resumes.
Cc: stable@vger.kernel.org
Fixes: 53c762b47f72 ("platform/loongarch: laptop: Add backlight power control support")
Tested-by: Yao Zi <me@ziyao.cc>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Zixing Liu <liushuyu@aosc.io>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The driver populates acpi_device_class() which is never read afterward,
so make it stop doing that and drop the symbol defined specifically for
this purpose.
No intentional functional impact.
This change will facilitate the removal of "device_class" from "struct
acpi_device_pnp" in the future.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free().
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 4ab17e762b34 ("LoongArch: BPF: Use BPF prog pack allocator")
Acked-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fixes: 87caaeef7995 ("pidfs: implement ino allocation without the pidmap lock")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607231547.ehCQxi0L-lkp@intel.com/
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260723160114.291515-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
