summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2025-07-29Merge branches 'clk-rockchip', 'clk-thead', 'clk-microchip', 'clk-imx' and ↵Stephen Boyd
'clk-qcom' into clk-next * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 132MHz * clk-thead: clk: thead: th1520-ap: Describe mux clocks with clk_mux clk: thead: th1520-ap: Correctly refer the parent of osc_12m clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED * clk-microchip: clk: at91: sam9x7: update pll clk ranges * clk-imx: MAINTAINERS: Update i.MX Clock Entry clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR clk: imx95-blk-ctl: Rename lvds and displaymix csr blk clk: imx95-blk-ctl: Fix synchronous abort dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data * clk-qcom: (65 commits) dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom: Remove double colon from description clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos dt-bindings: clock: qcom: document the Milos Video Clock Controller clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos dt-bindings: clock: qcom: document the Milos GPU Clock Controller clk: qcom: Add Display Clock controller (DISPCC) driver for Milos dt-bindings: clock: qcom: document the Milos Display Clock Controller clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos dt-bindings: clock: qcom: document the Milos Camera Clock Controller clk: qcom: Add Global Clock controller (GCC) driver for Milos dt-bindings: clock: qcom: document the Milos Global Clock Controller clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe clk: qcom: gcc-x1e80100: Add missing video resets dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100 clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC ...
2025-07-29Merge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' ↵Stephen Boyd
and 'clk-amlogic' into clk-next * clk-renesas: (42 commits) clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs clk: renesas: r9a09g057: Add XSPI clock/reset clk: renesas: r9a09g056: Add XSPI clock/reset clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting clk: renesas: r9a09g057: Add support for xspi mux and divider clk: renesas: r9a09g056: Add support for xspi mux and divider clk: renesas: r9a09g077: Add RIIC module clocks clk: renesas: r9a09g077: Add PLL2 and SDHI clock support clk: renesas: rzv2h: Drop redundant base pointer from pll_clk clk: renesas: r9a09g057: Add entries for the RSPIs dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock clk: renesas: rzv2h: Add missing include file clk: renesas: rzv2h: Use devm_kmemdup_array() clk: renesas: Add CPG/MSSR support to RZ/N2H SoC clk: renesas: r9a09g077: Add PCLKL core clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID ... * clk-samsung: clk: samsung: exynosautov920: add block hsi2 clock support dt-bindings: clock: exynosautov920: add hsi2 clock definitions dt-bindings: clock: exynosautov920: sort clock definitions clk: samsung: exynos850: fix a comment clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD * clk-spacemit: clk: spacemit: ccu_pll: fix error return value in recalc_rate callback reset: spacemit: add support for SpacemiT CCU resets clk: spacemit: mark K1 pll1_d8 as critical clk: spacemit: define three reset-only CCUs clk: spacemit: set up reset auxiliary devices soc: spacemit: create a header for clock/reset registers dt-bindings: soc: spacemit: define spacemit,k1-ccu resets * clk-allwinner: clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate() clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll clk: sunxi-ng: v3s: Fix de clock definition clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset * clk-amlogic: clk: amlogic: s4: remove unused data clk: amlogic: drop clk_regmap tables clk: amlogic: get regmap with clk_regmap_init clk: amlogic: remove unnecessary headers clk: amlogic: axg-audio: use the auxiliary reset driver
2025-07-29Merge branches 'clk-bindings', 'clk-cleanup', 'clk-pwm', 'clk-hw-device', ↵Stephen Boyd
'clk-xilinx' and 'clk-adi' into clk-next - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers * clk-bindings: (30 commits) dt-bindings: clock: convert lpc1850-cgu.txt to yaml format dt-bindings: clock: Convert qca,ath79-pll to DT schema dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema dt-bindings: clock: Convert moxa,moxart-clock to DT schema dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema dt-bindings: clock: Convert maxim,max9485 to DT schema dt-bindings: clock: Convert qcom,krait-cc to DT schema dt-bindings: clock: qcom: Remove double colon from description dt-bindings: clock: convert lpc1850-ccu.txt to yaml format dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema dt-bindings: clock: Convert marvell,berlin2-clk to DT schema dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema dt-bindings: clock: Convert lsi,axm5516-clks to DT schema ... * clk-cleanup: (29 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: bcm: bcm2835: convert from round_rate() to determine_rate() MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry clk: ti: Simplify ti_find_clock_provider() ... * clk-pwm: clk: pwm: Make use of non-sleeping PWMs clk: pwm: Don't reconfigure running PWM at probe time clk: pwm: Convert to use pwm_apply_might_sleep() clk: pwm: Let .get_duty_cycle() return the real duty cycle * clk-hw-device: clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests clk: tests: Make clk_register_clk_parent_data_device_driver() common clk: add a clk_hw helpers to get the clock device or device_node * clk-xilinx: clk: xilinx: vcu: Update vcu init/reset sequence clk: xilinx: vcu: unregister pll_post only if registered correctly * clk-adi: clk: clk-axi-clkgen: fix coding style issues clk: clk-axi-clkgen move to min/max() clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime include: adi-axi-common: add new helper macros include: linux: move adi-axi-common.h out of fpga clk: clk-axi-clkgen: make sure to include mod_devicetable.h clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
2025-07-29Merge tag 'irq-drivers-2025-07-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt chip driver updates from Thomas Gleixner: - Add support of forced affinity setting to yet offline CPUs for the MIPS-GIC to ensure that the affinity of per CPU interrupts can be set during the early bringup phase of a secondary CPU in the hotplug code before the CPU is set online and interrupts are enabled - Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI interrupt chip - Make the interrupt routing to RISV-V harts specification compliant so it supports arbitrary hart indices - Add a command line parameter and related handling to disable the generic RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC. Unfortunatly this is required because there is no mechanism available to discover this programatically. - Enable wakeup sources on the Renesas RZV2H driver - Convert interrupt chip drivers, which use a open coded variant of msi_create_parent_irq_domain() to use the new functionality - Convert interrupt chip drivers, which use the old style two level implementation of MSI support over to the MSI parent mechanism to prepare for removing at least one of the three PCI/MSI backend variants. - The usual cleanups and improvements all over the place * tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/riscv-imsic: Add kernel parameter to disable IPIs irqchip/gic-v3: Fix GICD_CTLR register naming irqchip/ls-scfg-msi: Fix NULL dereference in error handling irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain() irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Convert to __free irqchip/alpine-msi: Convert to lock guards irqchip/alpine-msi: Clean up whitespace style irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain() irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain() irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain() irqdomain: Add device pointer to irq_domain_info and msi_domain_info irqchip/renesas-rzv2h: Remove unneeded includes irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/aslint-sswi: Resolve hart index ...
2025-07-29Merge tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Remove redundant pm_runtime_mark_last_busy() calls MMC host: - Convert drivers to use devm_mmc_alloc_host() - Remove redundant pm_runtime_mark_last_busy() calls - renesas_sdhi: - Add support for the RZ/T2H and RZ/N2H variants - Fix incorrect auto retuning for an SDIO card - rtsx_usb_sdmmc: - Add 74 clocks in poweron flow - Re-work the code in sd_set_power_mode() - loongson2: - Add driver for the Loongson-2K SD/SDIO controller - Add support for the Loongson-2K2000 SD/SDIO/eMMC controller - sdhci: - Drop sdhci_free_host()/sdhci_pltfm_free() interface - Remove the sdhci_free_host() and sdhci_pltfm_free() helpers - sdhci-cadence: Add support for the Mobileye EyeQ controller - sdhci-esdhc-imx: - Optimize clock loopback selection - Don't change pinctrl in suspend if wakeup source - sdhci-msm: - Add support for the Milos variant - Add support for the qcs8300 variant - Ensure SD card power isn't ON when card gets removed - sdhci-of-k1: Disable HW busy detection" * tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits) mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata mmc: loongson2: Fix error code in loongson2_mmc_resource_request() dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller mmc: loongson2: prevent integer overflow in ret variable mmc: Remove redundant pm_runtime_mark_last_busy() calls mmc: sdhci-msm: Ensure SD card power isn't ON when card removed dt-bindings: mmc: Add sdhci compatible for qcs8300 mmc: sdhci-cadence: use of_property_present mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000 mmc: loongson2: Add Loongson-2K SD/SDIO controller driver dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding mmc: Convert ternary operator to str_true_false() helper dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support mmc: sdhci-cadence: add Mobileye eyeQ support dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode() mmc: cb710-mmc: Convert ternary operator to str_plural() helper mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode() ...
2025-07-29Merge tag 'pmdomain-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Leave powered-on genpds on until ->sync_state() or late_initcall_sync - Export a common ->sync_state() helper for genpd providers - Add generic ->sync_state() support - Add a bus/driver for genpd provider-devices - Introduce dev_pm_genpd_is_on() for consumers pmdomain providers: - cpuidle-psci: Drop redundant ->sync_state() support - cpuidle-riscv-sbi: Drop redundant ->sync_state() support - imx: Set ISI panic write for imx8m-blk-ctrl - qcom: Add support for Glymur and Milos RPMh power-domains - qcom: Use of_genpd_sync_state() for power-domains - rockchip: Add support for the RK3528 variant - samsung: Fix splash-screen handover by enforcing a ->sync_state() - sunxi: Add support for Allwinner A523's PCK600 power-controller - tegra: Opt-out from genpd's common ->sync_state() support for pmc - thead: Instantiate a GPU power sequencer via the auxiliary bus - renesas: Move init to postcore_initcalls - xilinx: Move ->sync_state() support to firmware driver - xilinx: Use of_genpd_sync_state() for power-domains pmdomain consumers: - remoteproc: imx_rproc: Fixup the detect/attach procedure for pre-booted cores" * tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits) pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains dt-bindings: power: rpmpd: Add Glymur power domains remoteproc: imx_rproc: detect and attach to pre-booted remote cores remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU pmdomain: core: introduce dev_pm_genpd_is_on() pmdomain: ti: Select PM_GENERIC_DOMAINS pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller pmdomain: sunxi: sun20i-ppu: add A523 support pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state cpuidle: riscv-sbi: Drop redundant sync_state support cpuidle: psci: Drop redundant sync_state support pmdomain: core: Leave powered-on genpds on until sync_state pmdomain: core: Leave powered-on genpds on until late_initcall_sync pmdomain: core: Default to use of_genpd_sync_state() for genpd providers driver core: Add dev_set_drv_sync_state() pmdomain: core: Add common ->sync_state() support for genpd providers driver core: Export get_dev_from_fwnode() firmware: xilinx: Use of_genpd_sync_state() firmware: xilinx: Don't share zynqmp_pm_init_finalize() ...
2025-07-29Merge tag 'i2c-for-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C Core: - prevent double-free of an fwnode if it is a software node - use recent helpers instead of custom ACPI or outdated OF ones - add a more elaborate description of a message flag Cleanups and refactorings: - lpi2c, riic, st, stm32f7: general improvements - riic: support more flexible IRQ configurations - tegra: fix documentation Improvements: - lpi2c: improve register polling and add atomic transfer - imx: use guarded spinlocks New hardware support: - Samsung Exynos 2200 - Renesas RZ/T2H (R9A09G077), RZ/N2H (R9A09G087) DT binding: - rk3x: enable power domains - nxp: support clock property" * tag 'i2c-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Fix double-free of fwnode in i2c_unregister_device() i2c: lpi2c: implement xfer_atomic callback i2c: lpi2c: use readl_poll_timeout() for register polling dt-bindings: i2c: i2c-rk3x: Allow use of a power-domain dt-bindings: i2c: exynos5: add samsung,exynos2200-hsi2c compatible i2c: lpi2c: convert to use secs_to_jiffies() i2c: st: Use min() to improve code i2c: imx: use guard to take spinlock i2c: stm32f7: Use str_on_off() helper dt-bindings: i2c: nxp,pnx-i2c: allow clocks property i2c: riic: Add support for RZ/T2H SoC i2c: riic: Move generic compatible string to end of array i2c: riic: Pass IRQ desc array as part of OF data dt-bindings: i2c: renesas,riic: Document RZ/T2H and RZ/N2H support dt-bindings: i2c: renesas,riic: Move ref for i2c-controller.yaml to the end i2c: tegra: Add missing kernel-doc for dma_dev member i2c: Clarify behavior of I2C_M_RD flag i2c: mux: pca954x: Use dev_fwnode() i2c: acpi: Replace custom code with device_match_acpi_handle()
2025-07-29Merge tag 'soc-newsoc-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new SoC support from Arnd Bergmann: "These five newly supported chips come with both devicetree descriptions and the changes to wire them up to the build system for easier bisection. The chips in question are: - Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell in the product line that started with the Digital StrongARM SA1100 based PDAs and continued with the Intel PXA2xx that dominated early smartphones. This one only made it only into a few products before the entire product line was cut in 2015. - The QiLai SoC is made by RISC-V core designer Andes Technologies and is in the 'Voyager' reference board in MicroATX form factor. It uses four in-order AX45MP cores, which is the midrange product from Andes. - CIX P1 is one of the few Arm chips designed for small workstations, and this one uses 12 Cortex-A720/A520 cores, making it also one of the only ARMv9.2 machines that one can but at the moment. - Axiado AX3000 is an embedded chip with relative small Cortex-A53 CPU cores described as a "Trusted Control/Compute Unit" that can be used as a BMC in servers. In addition to the usual I/O, this one comes with 10GBit ethernet and and a 4TOPS NPU. - Sophgo SG2000 is an embedded chip that comes with both RISC-V and Arm cores that can run Linux. This was already supported for RISC-V but now it also works on Arm One more chip, the Black Sesame C1200 did not make it in tirm for the merge window" * tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) arm64: defconfig: Enable rudimentary Sophgo SG2000 support arm64: Add SOPHGO SOC family Kconfig support arm64: dts: sophgo: Add Duo Module 01 Evaluation Board arm64: dts: sophgo: Add Duo Module 01 arm64: dts: sophgo: Add initial SG2000 SoC device tree MAINTAINERS: Add entry for Axiado arm64: defconfig: enable the Axiado family arm64: dts: axiado: Add initial support for AX3000 SoC and eval board arm64: add Axiado SoC family dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller dt-bindings: serial: cdns: add Axiado AX3000 UART controller dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant dt-bindings: gpio: cdns: convert to YAML dt-bindings: arm: axiado: add AX3000 EVK compatible strings dt-bindings: vendor-prefixes: Add Axiado Corporation MAINTAINERS: Add CIX SoC maintainer entry arm64: dts: cix: Add sky1 base dts initial support dt-bindings: clock: cix: Add CIX sky1 scmi clock id arm64: defconfig: Enable CIX SoC mailbox: add CIX mailbox driver ...
2025-07-29Merge tag 'soc-drivers-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...
2025-07-29Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There are a few new variants of existing chips: - mt6572 is an older mobile phone chip from mediatek that was extremely popular a decade ago but never got upstreamed until now - exynos2200 is a recent high-end mobile phone chip used in a few Samsung phones like the Galaxy S22 - Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M (R8A779H0) and used in automotive applications - Tegra264 is a new chip from NVIDIA, but support is fairly minimal for now, and not much information is public about it There are five more chips in a separate branch, as those are new chip families that I merged along with the necessary infrastructure. New board support is not that exciting, with a total of 33 newly added machines here: - Evaluation platforms for the chips above, plus TI am62d2 and Sophgo sg2042 - Six 32-bit industrial boards based on stm32, imx6 and am33 chips, plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and imx95 - Two newly added ASPEED BMC based motherboards, and one that got removed - Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit msm8976 SoCs - Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1 - A set-top box based on Amlogic meson-gxm Updates for existing machines are spread over all the above families. One notable change here is support for the RP1 I/O chip used in Raspberry Pi 5" * tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits) riscv: dts: sophgo: fix mdio node name for CV180X riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings riscv: dts: sophgo: add ethernet GMAC device for sg2042 riscv: dts: sophgo: Enable ethernet device for Huashan Pi riscv: dts: sophgo: Add mdio multiplexer device for cv18xx riscv: dts: sophgo: Add ethernet device for cv18xx riscv: dts: sophgo: sg2044: add pmu configuration riscv: dts: sophgo: sg2044: add ziccrse extension riscv: dts: sophgo: add zfh for sg2042 riscv: dts: sophgo: add ziccrse for sg2042 riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree riscv: dts: sophgo: sg2044: add PCIe device support for SG2044 riscv: dts: sophgo: sg2044: add MSI device support for SG2044 riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property ...
2025-07-29Merge tag 'devicetree-for-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices - Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301, Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi, himax,hx8357d, and sitronix,st7586 bindings to DT schema format - Fixes for some display bindings - More indentation clean-ups in examples - Add more guidelines and clarifications on writing bindings * tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits) dt-bindings: Correct indentation and style in DTS example dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format dt-bindings: interrupt-controller: Add fsl,icoll.yaml dt-bindings: interrupt-controller: Add missing Xilinx INTC binding dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints dt-bindings: display: imx: convert fsl,dcu.txt to yaml format dt-bindings: timer: via,vt8500-timer: Convert to YAML dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema dt-bindings: trivial-devices: Add undocumented hwmon devices dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible docs: dt: writing-schema: Document preferred order of properties docs: dt: writing-bindings: Document discouraged instance IDs docs: dt: writing-bindings: Document compatible and filename naming docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS docs: dt: writing-bindings: Consistently use single-whitespace docs: dt: writing-bindings: Express better expectations of "specific" ...
2025-07-29Merge tag 'usb-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1. Lots of little things in here, mostly all small cleanups and updates, no major new features this development cycle. Stuff included in here is: - xhci minor tweaks for error handling - typec minor updates and a driver update - gadget driver api cleanups - unused function removals - unbind memory leak fixes - a few new device ids added - a few new devices supported for some drivers - other minor cleanups and changes All of these have been in linux-next with no reported issues, with the leak fixes being in the shortest amount of time, but they are 'obviously correct' :)" * tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits) usb: musb: omap2430: clean up probe error handling usb: musb: omap2430: fix device leak at unbind usb: gadget: udc: renesas_usb3: fix device leak at unbind usb: dwc3: meson-g12a: fix device leaks at unbind usb: dwc3: imx8mp: fix device leak at unbind usb: musb: omap2430: enable compile testing usb: gadget: udc: renesas_usb3: drop unused module alias usb: xhci: print xhci->xhc_state when queue_command failed usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init() USB: serial: option: add Foxconn T99W709 usb: core: add urb->sgt parameter description thunderbolt: Fix copy+paste error in match_service_id() usb: typec: ucsi: Update power_supply on power role change usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default usb: typec: fusb302: cache PD RX state usb: typec: ucsi: yoga-c630: add DRM dependency usb: gadget : fix use-after-free in composite_dev_cleanup() usb: chipidea: imx: Add a missing blank line usb: gadget: f_uac1: replace scnprintf() with sysfs_emit() usb: usblp: clean up assignment inside if conditions ...
2025-07-29Merge tag 'tty-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.17-rc1. Included in here is the following types of changes: - another cleanup round from Jiri for the 8250 serial driver and some other tty drivers, things are slowly getting better with our apis thanks to this work. This touched many tty drivers all over the tree. - qcom_geni_serial driver update for new platforms and devices - 8250 quirk handling fixups - dt serial binding updates for different boards/platforms - other minor cleanups and fixes All of these have been in linux-next with no reported issues" * tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain serial: 8250: fix panic due to PSLVERR dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible vt: defkeymap: Map keycodes above 127 to K_HOLE vt: keyboard: Don't process Unicode characters in K_OFF mode serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms serial: qcom-geni: Enable PM runtime for serial driver serial: qcom-geni: move clock-rate logic to separate function serial: qcom-geni: move resource control logic to separate functions serial: qcom-geni: move resource initialization to separate function soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms dt-bindings: qcom: geni-se: describe SA8255p dt-bindings: serial: describe SA8255p serial: 8250_dw: Fix typo "notifer" dt-bindings: serial: 8250: spacemit: set clocks property as required dt-bindings: serial: renesas: Document RZ/V2N SCIF serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build tty: omit need_resched() before cond_resched() serial: 8250_ni: Reorder local variables serial: 8250_ni: Fix build warning ...
2025-07-29Merge tag 'char-misc-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / IIO / other driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystems for 6.17-rc1. It's a big set this time around, with the huge majority being in the iio subsystem with new drivers and dts files being added there. Highlights include: - IIO driver updates, additions, and changes making more code const and cleaning up some init logic - bus_type constant conversion changes - misc device test functions added - rust miscdevice minor fixup - unused function removals for some drivers - mei driver updates - mhi driver updates - interconnect driver updates - Android binder updates and test infrastructure added - small cdx driver updates - small comedi fixes - small nvmem driver updates - small pps driver updates - some acrn virt driver fixes for printk messages - other small driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) binder: Use seq_buf in binder_alloc kunit tests binder: Add copyright notice to new kunit files misc: ti_fpc202: Switch to of_fwnode_handle() bus: moxtet: Use dev_fwnode() pc104: move PC104 option to drivers/Kconfig drivers: virt: acrn: Don't use %pK through printk comedi: fix race between polling and detaching interconnect: qcom: Add Milos interconnect provider driver dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC mei: more prints with client prefix mei: bus: use cldev in prints bus: mhi: host: pci_generic: Add Telit FN990B40 modem support bus: mhi: host: Detect events pointing to unexpected TREs bus: mhi: host: pci_generic: Add Foxconn T99W696 modem bus: mhi: host: Use str_true_false() helper bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance. bus: mhi: host: Fix endianness of BHI vector table bus: mhi: host: pci_generic: Disable runtime PM for QDU100 bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640 dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio' ...
2025-07-29Merge tag 'kvmarm-6.17' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #1 - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes.
2025-07-28Merge tag 'pwm/for-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding support for variants to existing drivers, minor improvements to both drivers and docs, device tree documenation updates, the noteworthy changes are: - A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon and acked by Guenter Roeck - chardev support for PWM devices. This leverages atomic PWM updates to userspace and at the same time simplifies and accelerates PWM configuration changes" * tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits) pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware" hwmon: add support for MC33XS2410 hardware monitoring pwm: mc33xs2410: add hwmon support pwm: img: Remove redundant pm_runtime_mark_last_busy() calls pwm: Expose PWM_WFHWSIZE in public header dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format docs: pwm: Adapt Locking paragraph to reality pwm: twl-led: Drop driver local locking pwm: sun4i: Drop driver local locking pwm: sti: Drop driver local locking pwm: microchip-core: Drop driver local locking pwm: lpc18xx-sct: Drop driver local locking pwm: fsl-ftm: Drop driver local locking pwm: clps711x: Drop driver local locking pwm: atmel: Drop driver local locking pwm: argon-fan-hat: Add Argon40 Fan HAT support dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT dt-bindings: vendor-prefixes: Document Argon40 pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196 pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data ...
2025-07-28Merge tag 'spi-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release is almost entirely driver work, mostly new drivers with the usual smattering of per driver updates anf fixes, with only trivial changes in the core. Highlights include: - Quite a bit of maintainence work on the STM32 and Qualcomm drivers - Usage of the newly added devm_dma_request_chan() in the ateml driver, pulling in the relevant dmaengine change - Cleanups of our usage of the PM autosuspend functions, this pulls in some PM core changes on a shared tag - Support for ADI sigma-delta triggers, Amlogic SPISG, Mediatek MT6991 and MT8196, Renesas RZ/V2H(P) and SOPHGO SG2042" * tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (62 commits) spi: SPISG: Fix less than zero comparison on a u32 variable spi: intel: Allow writeable MTD partition with module param spi: Add driver for the RZ/V2H(P) RSPI IP spi: dt-bindings: Document the RZ/V2H(P) RSPI MAINTAINERS: Add an entry for Amlogic spi driver spi: Add Amlogic SPISG driver spi: dt-bindings: Add binding document of Amlogic SPISG controller spi: spi-sg2044-nor: Add SPI-NOR controller for SG2042 spi: spi-sg2044-nor: Add configurable chip_info spi: dt-bindings: spi-sg2044-nor: Change SOPHGO SG2042 spi: spi-qpic-snand: simplify bad block marker duplication spi: spidev: Add an entry for the ABB spi sensors dt-bindings: trivial-devices: Document ABB sensors spi: stm32-ospi: Fix NULL vs IS_ERR() bug in stm32_ospi_get_resources() spi: gpio: Use explicit 'unsigned int' for parameter types spi: dt-bindings: spi-mux: Drop "spi-max-frequency" as required spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() spi: rspi: Convert to DEFINE_SIMPLE_DEV_PM_OPS() spi: sh-msiof: Convert to DEFINE_SIMPLE_DEV_PM_OPS() spi: xilinx: Fix block comment style and minor cleanups ...
2025-07-28Merge tag 'regulator-v6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The big change in this release is the addition of Rust bindings from Daniel Almeida, allowing fairly basic consumer use with support for enable and voltage setting operations. This should be good for the vast majority of consumers. Otherwise it's been quite quiet, a few new devices supported, plus some cleanups and fixes. Summary: - Basic Rust bindings - A fix for making large voltage changes on regulators where we limit the size of voltage change we will do in one step, previously we just got as close as we could in one step - Cleanups of our usage of the PM autosuspend functions, this pulls in some PM core changes on a shared tag - Mode setting support for PCA9450 - Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and PMR735B, Raspberry Pi displays and TI TPS652G1 The TI driver pulls in the MFD portion of the support for the device and the pinctrl driver which was in the same tag" * tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits) regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator" regulator: core: repeat voltage setting request for stepped regulators regulator: rt6160: Add rt6166 vout min_uV setting for compatible MAINTAINERS: add regulator.rs to the regulator API entry rust: regulator: add a bare minimum regulator abstraction regulator: tps6286x-regulator: Fix a copy & paste error regulator: qcom-rpmh: add support for pm7550 regulators regulator: qcom-rpmh: add support for pmr735b regulators regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators regulator: tps6594-regulator: refactor variant descriptions regulator: tps6594-regulator: remove hardcoded buck config regulator: tps6594-regulator: remove interrupt_count dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM mfd: tps6594: Add TI TPS652G1 support regulator: sy8827n: make enable gpio NONEXCLUSIVE ...
2025-07-28Merge tag 'gpio-updates-for-v6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "There's one new driver (Apple SMC) and extensions to existing drivers for supporting new HW models. A lot of different impovements across drivers and in core GPIO code. Details on that are in the signed tag as usual. We managed to remove some of the legacy APIs. Arnd Bergmann started to work on making the legacy bits optional so that we may compile them only for older platforms that still really need them. Rob Herring has done a lot of work to convert legacy .txt dt-bindings for GPIO controllers to YAML. There are only a few left now in the GPIO tree. A big part of the commits in this PR concern the conversion of GPIO drivers to using the new line value setter callbacks. This conversion is now complete treewide (unless I've missed something) and once all the changes from different trees land in mainline, I'll send you another PR containing a commit dropping the legacy callbacks from the tree. As the quest to pay back technical dept never really ends, we're starting another set of interface conversions, this time it's about moving fields specific to only a handful of drivers using the gpio-mmio helper out of the core gpio_chip structure that every controller implements and uses. This cycle we introduce a new set of APIs and convert a few drivers under drivers/gpio/, next cycle we'll convert remaining modules treewide (in gpio, pinctrl and mfd trees) and finally remove the old interfaces and move the gpio-mmio fields into their own structure wrapping gpio_chip. One last change I should mention here is the rework of the sysfs interface. In 2016, we introduced the GPIO character device as the preferred alternative to the sysfs class under /sys/class/gpio. While it has seen a wide adoption with the help of its user-space counterpart - libgpiod - there are still users who prefer the simplicity of sysfs. As far as the GPIO subsystem is concerned, the problem is not the existince of the GPIO class as such but rather the fact that it exposes the global GPIO numbers to the user-space, stopping us from ever being able to remove the numberspace from the kernel. To that end, this release we introduced a parallel, limited sysfs interface that doesn't expose these numbers and only implements a subset of features that are relevant to the existing users. This is a result of several discussions over the course of last year and should allow us to remove the legacy part some time in the future. Summary: GPIOLIB core: - introduce a parallel, limited sysfs user ABI that doesn't expose the global GPIO numbers to user-space while maintaining backward compatibility with the end goal of it completely replacing the existing interface, allowing us to remove it - remove the legacy devm_gpio_request() routine which has no more users - start the process of allowing to compile-out the legacy parts of the GPIO core for users who don't need it by introducing a new Kconfig option: GPIOLIB_LEGACY - don't use global GPIO numbers in debugfs output from the core code (drivers still do it, the work is ongoing) - start the process of moving the fields specific to the gpio-mmio helper out of the core struct gpio_chip into their own structure that wraps it: create a new header with modern interfaces and convert several drivers to using it - remove the platform data structure associated with the gpio-mmio helper from the kernel after having converted all remaining users to generic device properties - remove legacy struct gpio definition as it has no more users New drivers: - add the GPIO driver for the Apple System Management Controller Driver improvements: - add support for new models to gpio-adp5585, gpio-tps65219 and gpio-pca953x - extend the interrupt support in gpio-loongson-64bit - allow to mark the simulated GPIO lines as invalid in gpio-sim - convert all remaining GPIO drivers to using the new GPIO value setter callbacks - convert gpio-rcar to using simple device power management ops callbacks - don't check if current direction of a line is output before setting the value in gpio-pisosr and ti-fpc202: the GPIO core already handles that - also drop unneeded GPIO range checks in drivers, the core already makes sure we're within bounds when calling driver callbacks - use dev_fwnode() where applicable across GPIO drivers - set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user wants to change direction of the pin to output even though these drivers don't need to do anything else to actually set the direction, otherwise a call like gpiod_direction_output(d, 1) will not result in the line driver high - remove the reduntant call to pm_runtime_mark_last_busy() from gpio-arizona - use lock guards in gpio-cadence and gpio-mxc - check the return values of regmap functions in gpio-wcd934x and gpio-tps65912 - use better regmap interfaces in gpio-wcove and gpio-pca953x - remove dummy GPIO chip callbacks from several drivers in cases where the GPIO core can already handle their absence - allow building gpio-palmas as a module Fixes: - use correct bit widths (according to the documentation) in gpio-virtio Device-tree bindings: - convert several of the legacy .txt documents for many different devices to YAML, improving automatic validation - create a "trivial" GPIO DT schema that covers a wide range of simple hardware that share a set of basic GPIO properties - document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander - document a new model for pca95xx - add and/or remove properties in YAML documents for gpio-rockchip, fsl,qoriq-gpio, arm,pl061 and gpio-xilinx Misc: - some minor refactoring in several places, adding/removing forward declarations, moving defines to better places, constify the arguments in some functions, remove duplicate includes, etc. - documentation updates" * tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits) MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB gpio: virtio: Fix config space reading. gpiolib: make legacy interfaces optional dt-bindings: gpio: rockchip: Allow use of a power-domain gpiolib: of: add forward declaration for struct device_node power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC gpio: Add new gpio-macsmc driver for Apple Macs mfd: Add Apple Silicon System Management Controller soc: apple: rtkit: Make shmem_destroy optional dt-bindings: mfd: Add Apple Mac System Management Controller dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller dt-bindings: gpio: Add Apple Mac SMC GPIO block gpio: cadence: Remove duplicated include in gpio-cadence.c gpio: tps65219: Add support for TI TPS65214 PMIC gpio: tps65219: Update _IDX & _OFFSET macro prefix gpio: sysfs: Fix an end of loop test in gpiod_unexport() dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema dt-bindings: gpio: Convert maxim,max3191x to DT schema dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles ...
2025-07-28Merge tag 'sound-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This includes lots of file shuffling due to HD-audio code reorganization and many trivial changes, but otherwise there shouldn't be much surprise from the functionality POV. The PR includes the PM changes as prerequisite, too. Some highlights below: Core: - Performance optimizations in PCM core code - Refactoring of ASoC Kconfig menus to be hopefully more consistant and easier to navigate. - Refactoring of ASoC DAPM code, mainly hiding functionality that doesn't need to be exposed to drivers HD-audio reorganization: - All code are moved under sound/hda with a bit more understandable tree structure, as well as file renames - The huge Realtek driver code is split to several parts, a common helper module with driver modules per probe entry - HDMI and Cirrus codec drivers also split ASoC: - Further work on the generic handling for SoundWire SDCA devices - Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5, various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753 HD-audio and USB-audio: - TAS2781 driver cleanup and TAS2770 support - EQ enablement in CA0132 driver - USB audio quirk code cleanups Others: - Cleanups of PM autosuspend call patterns with the update from the PM tree - Lots of strcpy() -> strscpy() conversions for fixed size arrays" * tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits) ALSA: hda: Add TAS2770 support ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode ASoC: SDCA: Fix implicit cast from le16 ASoC: SDCA: Shrink detected_mode_handler() stack frame ASoC: SDCA: Check devm_mutex_init() return value ASoC: SDCA: add route by the number of input pins in MU entity ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL. ASoC: codec: tlv320aic32x4: Fix reset GPIO check ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level ASoC: SDCA: Add hw_params() helper function ASoC: SDCA: Add a helper to get the SoundWire port number ASoC: SDCA: Add helper to add DAI constraints ASoC: soc-dai: Add private data to snd_soc_dai ASoC: SDCA: Move SDCA search functions and export ASoC: SDCA: Remove overly chatty input pin list warning ASoC: SDCA: Allow read-only controls to be deferrable ASoC: SDCA: Update memory allocations to zero initialise ...
2025-07-28Merge tag 'thermal-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These update the thermal control sysfs interface and multiple thermal control drivers: - Convert EAGAIN into ENODATA in temp_show() to prevent user space from polling the sysfs file in vain after a failing O_NONBLOCK read under the assumption that the read would have blocked (Hsin-Te Yuan) - Add Wildcat Lake PCI ID to the int340x Intel processor thermal driver (Srinivas Pandruvada) - Add debugfs interface to override the temperature set by the firmware in the Intel platform temperature control (PTC) interface and add a new sysfs control attribute called thermal_tolerance to it (Srinivas Pandruvada) - Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal driver and add support for more SPMI variants to it (Anjelique Melendez) - Constify the thermal_zone_device_ops structure where possible in several assorted thermal drivers (Christophe Jaillet) - Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is more adequate, wherever possible in thermal drivers (Jiri Slaby) - Implement and document One-Time Programmable fuse support in the Rockchip thermal driver in order to increase the precision of the measurements (Nicolas Frattaroli) - Change the way the Mediatek LTVS thermal driver stores the initialization data sequence to support different sequences matching different platforms. Introduce mt7988 support with a new initialization sequence (Mason Chang) - Document the QCom TSens Milos Temperature Sensor DT bindings (Luca Weiss) - Add the fallback compatible string for MT7981 and MT8516 DT bindings (Aleksander Jan Bajkowski) - Add the compatible string for the Tegra210B01 SOC_THERM driver (Aaron Kling)" * tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) dt-bindings: thermal: tegra: Document Tegra210B01 dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516 dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const thermal/drivers/rockchip: Support reading trim values from OTP dt-bindings: thermal: rockchip: document otp thermal trim thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver dt-bindings: rockchip-thermal: Add RK3576 compatible thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode thermal: Use dev_fwnode() thermal: Constify struct thermal_zone_device_ops thermal/drivers/loongson2: Constify struct thermal_zone_device_ops thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required thermal: sysfs: Return ENODATA instead of EAGAIN for reads ...
2025-07-28Merge tag 'pm-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "As is tradition, cpufreq is the part with the largest number of updates that include core fixes and cleanups as well as updates of several assorted drivers, but there are also quite a few updates related to system sleep, mostly focused on asynchronous suspend and resume of devices and on making the integration of system suspend and resume with runtime PM easier. Runtime PM is also updated to allow some code duplication in drivers to be eliminated going forward and to work more consistently overall in some cases. Apart from that, there are some driver core updates related to PM domains that should help to address ordering issues with devm_ cleanup routines relying on PM domains, some assorted devfreq updates including core fixes and cleanups, tooling updates, and documentation and MAINTAINERS updates. Specifics: - Fix two initialization ordering issues in the cpufreq core and a governor initialization error path in it, and clean it up (Lifeng Zheng) - Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq driver (Li RongQing) - Make intel_pstate always use HWP_DESIRED_PERF when operating in the passive mode (Rafael Wysocki) - Allow building the tegra124 cpufreq driver as a module (Aaron Kling) - Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn) - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter, Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng) - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant Malani) - Fix minimum performance state label error in the amd-pstate driver documentation (Shouye Liu) - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq governor and explain HW coordination influence on it in the documentation (Shashank Balaji) - Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle driver (Yury Norov) - Remove info about non-existing QoS interfaces from the PM QoS documentation (Ulf Hansson) - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu) - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan) - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan) - Simplify the sun8i-a33-mbus devfreq driver by using more devm functions (Uwe Kleine-König) - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi) - Check devfreq governor before using governor->name (Lifeng Zheng) - Remove a redundant devfreq_get_freq_range() call from devfreq_add_device() (Lifeng Zheng) - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng) - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng) - Extend the asynchronous suspend and resume of devices to handle suppliers like parents and consumers like children (Rafael Wysocki) - Make pm_runtime_force_resume() work for drivers that set the DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that collaborate with the general ACPI PM domain to set it (Rafael Wysocki) - Add kernel parameter to disable asynchronous suspend/resume of devices (Tudor Ambarus) - Drop redundant might_sleep() calls from some functions in the device suspend/resume core code (Zhongqiu Han) - Fix the handling of monitors connected right before waking up the system from sleep (tuhaowen) - Clean up MAINTAINERS entries for suspend and hibernation (Rafael Wysocki) - Fix error code path in the KEXEC_JUMP flow and drop a redundant pm_restore_gfp_mask() call from it (Rafael Wysocki) - Rearrange suspend/resume error handling in the core device suspend and resume code (Rafael Wysocki) - Fix up white space that does not follow coding style in the hibernation core code (Darshan Rathod) - Document return values of suspend-related API functions in the runtime PM framework (Sakari Ailus) - Mark last busy stamp in multiple autosuspend-related functions in the runtime PM framework and update its documentation (Sakari Ailus) - Take active children into account in pm_runtime_get_if_in_use() for consistency (Rafael Wysocki) - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu power capping driver (Sivan Zohar-Kotzer) - Add support for the Bartlett Lake platform to the Intel RAPL power capping driver (Qiao Wei) - Add PL4 support for Panther Lake to the intel_rapl_msr power capping driver (Zhang Rui) - Update contact information in the PM ABI docs and maintainer information in the power domains DT binding (Rafael Wysocki) - Update PM header inclusions to follow the IWYU (Include What You Use) principle (Andy Shevchenko) - Add flags to specify power on attach/detach for PM domains, make the driver core detach PM domains in device_unbind_cleanup(), and drop the dev_pm_domain_detach() call from the platform bus type (Claudiu Beznea) - Improve Python binding's Makefile for cpupower (John B. Wyatt IV) - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)" * tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag PM: docs: Use my kernel.org address in ABI docs and DT bindings PM: hibernate: Fix up white space that does not follow coding style PM: sleep: Rearrange suspend/resume error handling in the core Documentation: amd-pstate:fix minimum performance state label error PM: runtime: Take active children into account in pm_runtime_get_if_in_use() kexec_core: Drop redundant pm_restore_gfp_mask() call kexec_core: Fix error code path in the KEXEC_JUMP flow PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation drivers: cpufreq: add Tegra114 support rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs cpufreq: Exit governor when failed to start old governor cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() cpufreq: Init policy->rwsem before it may be possibly used cpufreq: Initialize cpufreq-based frequency-invariance later cpufreq: Remove duplicate check in __cpufreq_offline() cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode PM / devfreq: Add HiSilicon uncore frequency scaling driver ...
2025-07-28dt-bindings: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Lee Jones <lee@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-07-27dt-bindings: hwmon: Replace bouncing Alexandru Tachici emailsKrzysztof Kozlowski
Emails to alexandru.tachici@analog.com bounce permanently: Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup' so replace him with Cedric Encarnacion from Analog. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250724113735.59148-2-krzysztof.kozlowski@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-07-27dt-bindings: Add INA228 to ina2xx devicetree bindingsJonas Rebmann
Add the ina228 to ina2xx bindings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jonas Rebmann <jre@pengutronix.de> Link: https://lore.kernel.org/r/20250718-ina228-v2-2-227feb62f709@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-07-27dt-bindings: input: touchscreen: st1232: add touch-overlay exampleJavier Carrasco
The touch-overlay feature adds support for segments (touch areas) on the touchscreen surface that represent overlays with clipped touchscreen areas and printed buttons. Add nodes for a clipped touchscreen and overlay buttons to the existing example. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-3-b292a1bbb0a1@wolfvision.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-07-27dt-bindings: touchscreen: add touch-overlay propertyJavier Carrasco
The touch-overlay encompasses a number of touch areas that define a clipped touchscreen area and/or buttons with a specific functionality. A clipped touchscreen area avoids getting events from regions that are physically hidden by overlay frames. For touchscreens with printed overlay buttons, sub-nodes with a suitable key code can be defined to report key events instead of the original touch events. Reviewed-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-1-b292a1bbb0a1@wolfvision.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-07-27dt-bindings: input: syna,rmi4: Document F1A functionAndré Apitzsch
In some configurations the touch controller can support touch keys. Document the linux,keycodes property that enables those keys and specifies the keycodes that should be used to report the key events. Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-1-838d83c72e7f@apitzsch.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-07-26Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few Allwinner clk driver fixes: - Mark Allwinner A523 MBUS clock as critical to avoid system stalls - Fix names of CSI related clocks on Allwinner V3s. This includes changes to the driver, DT bindings and DT files. - Fix parents of TCON clock on Allwinner V3s" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: v3s: Fix TCON clock parents clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name clk: sunxi-ng: v3s: Fix CSI SCLK clock name clk: sunxi-ng: a523: Mark MBUS clock as critical
2025-07-26dt-bindings: ieee802154: Convert at86rf230.txt yaml formatFrank Li
Convert at86rf230.txt yaml format. Additional changes: - Add ref to spi-peripheral-props.yaml. - Add parent spi node in examples. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250724230129.1480174-1-Frank.Li@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25dt-bindings: net: dsa: microchip: Add KSZ8463 switch supportTristram Ha
KSZ8463 switch is a 3-port switch based from KSZ8863. Its register access is significantly different from the other KSZ SPI switches. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250725001753.6330-2-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25dt-bindings: net: altr,socfpga-stmmac: Add compatible string for Agilex5Matthew Gerlach
Add compatible string for the Altera Agilex5 variant of the Synopsys DWC XGMAC IP version 2.10. Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250724154052.205706-2-matthew.gerlach@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25Merge tag 'qcom-drivers-for-6.17-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.17 Fix race condition during SCM driver initialization, in relation to tzmem and waitqueue irq handling, Make the rpmh RSC driver support version 4 of the IP block. Add SM7635 family and related PMICs to the socinfo driver. Also add support for retrieving the bootloader build details. * tag 'qcom-drivers-for-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support Link: https://lore.kernel.org/r/20250720030743.285440-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-07-25dt-bindings: i2c: i2c-rk3x: Allow use of a power-domainJonas Karlman
The I2C controllers in most Rockchip SoCs are part of power domains that are always powered on, i.e. PD_BUS or PD_PMU. These always powered on power domains have typically not been described in the device tree. Because these power domains have been left out of the device tree there has not been any real need to properly describe the I2C controllers power domain. On RK3528 the I2C controllers are spread out among the described PD_RKVENC, PD_VO and PD_VPU power domains. However, one I2C controller belong to an undescribed always powered on power domain. Add support to describe an optional power-domains for the I2C controllers in Rockchip SoCs. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250723085654.2273324-3-jonas@kwiboo.se
2025-07-25dt-bindings: i2c: exynos5: add samsung,exynos2200-hsi2c compatibleIvaylo Ivanov
Add samsung,exynos2200-hsi2c compatible, reusing the autov9 support since it's compatible with exynos2200's i2c controllers. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250722121434.443648-1-ivo.ivanov.ivanov1@gmail.com
2025-07-25dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl propertyKyle Hendry
Add description for bcm63xx gpio-ctrl phandle which allows access to registers that control phy functionality. Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250724035300.20497-3-kylehendrydev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25dt-bindings: display: mediatek,dp: Allow DisplayPort AUX busAngeloGioacchino Del Regno
Like others, the MediaTek DisplayPort controller provides an auxiliary bus: import the common dp-aux-bus.yaml in this binding to allow specifying an aux-bus subnode. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20250724083914.61351-3-angelogioacchino.delregno@collabora.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-07-25dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml formatFrank Li
Convert fsl,vf610-mscm-ir.txt to yaml format. Additional changes: - remove label at example dts. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250724190342.1321632-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-07-25dt-bindings: interrupt-controller: Add fsl,icoll.yamlFrank Li
Add fsl,icoll.yaml for i.MX23 and i.MX28. Also add a generic fallback compatible string "fsl,icoll" for legacy devices, which have existed for over 15 years. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250724164624.1271661-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-07-25dt-bindings: interrupt-controller: Add missing Xilinx INTC bindingMichal Simek
Add missing description for AMD/Xilinx interrupt controller. The binding is used by Microblaze before dt-binding even existed but never been documented properly. IP acts as primary interrupt controller on Microblaze systems or can be used as secondary interrupt controller on ARM based systems like Zynq, ZynqMP, Versal or Versal Gen 2. Also as secondary interrupt controller on Microblaze-V (Risc-V) systems. Over the years IP exists in multiple variants based on attached bus as OPB, PLB or AXI that's why generic filename is used. Property xlnx,kind-of-intr is in hex because every bit position corresponds to interrupt line. Controller support mixing edge or level interrupts together and this is the property which distinguish them. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/2b9d4a3a693f501d420da88b8418732ba9def877.1753354675.git.michal.simek@amd.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-07-25dt-bindings: npu: rockchip,rknn: Add bindingsTomeu Vizoso
Add the bindings for the Neural Processing Unit IP from Rockchip. v2: - Adapt to new node structure (one node per core, each with its own IOMMU) - Several misc. fixes from Sebastian Reichel v3: - Split register block in its constituent subblocks, and only require the ones that the kernel would ever use (Nicolas Frattaroli) - Group supplies (Rob Herring) - Explain the way in which the top core is special (Rob Herring) v4: - Change required node name to npu@ (Rob Herring and Krzysztof Kozlowski) - Remove unneeded items: (Krzysztof Kozlowski) - Fix use of minItems/maxItems (Krzysztof Kozlowski) - Add reg-names to list of required properties (Krzysztof Kozlowski) - Fix example (Krzysztof Kozlowski) v5: - Rename file to rockchip,rk3588-rknn-core.yaml (Krzysztof Kozlowski) - Streamline compatible property (Krzysztof Kozlowski) v6: - Remove mention to NVDLA, as the hardware is only incidentally related (Kever Yang) - Mark pclk and npu clocks as required by all clocks (Rob Herring) v7: - Remove allOf section, not needed now that all nodes require 4 clocks (Heiko Stübner) v8: - Remove notion of top core (Robin Murphy) Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-6-77ebd484941e@tomeuvizoso.net
2025-07-24scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodesMacpaul Lin
Add MT8195 UFSHCI compatible string. Relax the schema to allow between one to eight clocks/clock-names entries for all MediaTek UFS nodes. Legacy platforms may only need a few clocks, whereas newer devices such as the MT8195 require additional clock-gating domains. For MT8195 specifically, enforce exactly eight clocks and clock-names entries to satisfy its hardware requirements. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20250722085721.2062657-3-macpaul.lin@mediatek.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-07-24scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS hostMacpaul Lin
Add the 'mediatek,ufs-disable-mcq' property to the UFS device-tree bindings. This flag corresponds to the UFS_MTK_CAP_DISABLE_MCQ host capability recently introduced in the UFS host driver, allowing it to disable the Multiple Circular Queue (MCQ) feature when present. The binding schema has also been updated to resolve DTBS check errors. Cc: stable@vger.kernel.org Fixes: 46bd3e31d74b ("scsi: ufs: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20250722085721.2062657-2-macpaul.lin@mediatek.com Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-07-24Merge tag 'for-net-next-2025-07-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: core: - hci_sync: fix double free in 'hci_discovery_filter_clear()' - hci_event: Mask data status from LE ext adv reports - hci_devcd_dump: fix out-of-bounds via dev_coredumpv - ISO: add socket option to report packet seqnum via CMSG - hci_event: Add support for handling LE BIG Sync Lost event - ISO: Support SCM_TIMESTAMPING for ISO TS - hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections - hci_sock: Reset cookie to zero in hci_sock_free_cookie() drivers: - btusb: Add new VID/PID 0489/e14e for MT7925 - btusb: Add a new VID/PID 2c7c/7009 for MT7925 - btusb: Add RTL8852BE device 0x13d3:0x3618 - btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601) - btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano - btusb: QCA: Support downloading custom-made firmwares - btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855 - nxp: add support for supply and reset - btnxpuart: Add support for 4M baudrate - btnxpuart: Correct the Independent Reset handling after FW dump - btnxpuart: Add uevents for FW dump and FW download complete - btintel: Define a macro for Intel Reset vendor command - btintel_pcie: Support Function level reset - btintel_pcie: Add support for device 0x4d76 - btintel_pcie: Make driver wait for alive interrupt - btintel_pcie: Fix Alive Context State Handling - hci_qca: Enable ISO data packet RX * tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits) Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections Bluetooth: hci_event: Mask data status from LE ext adv reports Bluetooth: btintel_pcie: Fix Alive Context State Handling Bluetooth: btintel_pcie: Make driver wait for alive interrupt Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()' Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855 Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID Bluetooth: btusb: QCA: Support downloading custom-made firmwares Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS Bluetooth: ISO: add socket option to report packet seqnum via CMSG Bluetooth: btintel: Define a macro for Intel Reset vendor command Bluetooth: Fix typos in comments Bluetooth: RFCOMM: Fix typos in comments Bluetooth: aosp: Fix typo in comment Bluetooth: hci_bcm4377: Fix typo in comment Bluetooth: btrtl: Fix typo in comment Bluetooth: btmtk: Fix typo in log string ... ==================== Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24Merge tag 'wireless-next-2025-07-24' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Another wireless update: - rtw89: - STA+P2P concurrency - support for USB devices RTL8851BU/RTL8852BU - ath9k: OF support - ath12k: - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - iwlwifi: some FIPS interoperability - brcm80211: support SDIO 43751 device - rt2x00: better DT/OF support - cfg80211/mac80211: - improved S1G support - beacon monitor for MLO * tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits) ssb: use new GPIO line value setter callbacks for the second GPIO chip wifi: Fix typos wifi: brcmsmac: Use str_true_false() helper wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure wifi: brcm80211: Remove yet more unused functions wifi: brcm80211: Remove more unused functions wifi: brcm80211: Remove unused functions wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions" wifi: iwlwifi: check validity of the FW API range wifi: iwlwifi: don't export symbols that we shouldn't wifi: iwlwifi: mld: use spec link id and not FW link id wifi: iwlwifi: mld: decode EOF bit for AMPDUs wifi: iwlwifi: Remove support for rx OMI bandwidth reduction wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1 wifi: iwlwifi: remove SC2F firmware support wifi: iwlwifi: mvm: Remove NAN support wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn wifi: iwlwifi: disable certain features for fips_enabled wifi: iwlwifi: mld: support channel survey collection for ACS scans ... ==================== Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24spi: sophgo: Add SPI NOR controller for SG2042Mark Brown
Merge series from Zixian Zeng <sycamoremoon376@gmail.com>: Add support SPI NOR flash memory controller for SG2042, using upstreamed SG2044 SPI NOR driver. Tested on SG2042 Pioneer Box, read, write operations. Thanks Chen Wang who provided machine and guidance.
2025-07-24Add RSPI support for RZ/V2HMark Brown
Merge series from Fabrizio Castro <fabrizio.castro.jz@renesas.com>: This series adds support for the Renesas RZ/V2H RSPI IP.
2025-07-24dt-bindings: clock: convert lpc1850-cgu.txt to yaml formatFrank Li
Convert lpc1850-cgu.txt to yaml format. Additional changes: - remove extra clock source nodes in example. - remove clock consumer in example. - remove clock-output-names and clock-clock-indices from required list to match existed dts. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250606162410.1361169-1-Frank.Li@nxp.com Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-07-24dt-bindings: clock: Convert qca,ath79-pll to DT schemaRob Herring (Arm)
Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250630232625.3700213-1-robh@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-07-24dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schemaRob Herring (Arm)
Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250630232637.3700584-1-robh@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-23 22:16:33 +0000