| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from David Lechner <dlechner@baylibre.com>:
This series is adding support for SPI controllers and peripherals that
have multiple SPI data lanes (data lanes being independent sets of
SDI/SDO lines, each with their own serializer/deserializer).
This series covers this specific use case:
+--------------+ +---------+
| SPI | | SPI |
| Controller | | ADC |
| | | |
| CS0 |--->| CS |
| SCLK |--->| SCLK |
| SDO |--->| SDI |
| SDI0 |<---| SDOA |
| SDI1 |<---| SDOB |
| SDI2 |<---| SDOC |
| SDI3 |<---| SDOD |
+--------------+ +--------+
The ADC is a simultaneous sampling ADC that can convert 4 samples at the
same time. It has 4 data output lines (SDOA-D) that each contain the
data of one of the 4 channels. So it requires a SPI controller with 4
separate deserializers in order to receive all of the information at the
same time.
This should also work for the use case in [1] as well. (Some of the
patches in this series were already submitted there). In that case the
SPI controller is used kind of like it is two separate SPI controllers,
each with its own chip select, clock, and data lines.
[1]: https://lore.kernel.org/linux-spi/20250616220054.3968946-1-sean.anderson@linux.dev/
The DT bindings are a fairly straight-forward mapping of which pins on
the peripheral are connected to which pins on the controller. The SPI
core code parses this and makes the information available to drivers.
When a peripheral driver sees that multiple data lanes are wired up, it
can chose to use them when sending messages.
The SPI message API is a bit higher-level than just specifying the
number of data lines for a SPI transfer though. I did some research on
other SPI controllers that have this feature. They tend to be the kind
meant for connecting to two flash memory chips at the same time but can
be used more generically as well. They generally have the option to
either use one lane at a time (Sean's use case), or can mirror the same
data on multiple lanes (no users of this yet) or can perform striping
of a single data FIFO/DMA stream to/from the two lanes (our use case).
For now, the API assumes that if you want to do mirror/striping, then
you want to use all available data lanes. Otherwise, it just uses the
first data lane for "normal" SPI transfers.
|
|
Add testing notice to "Before creating patches" section.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260123071523.1392729-1-dmantipov@yandex.ru>
|
|
Allow ML-DSA module signing to be enabled.
Note that OpenSSL's CMS_*() function suite does not, as of OpenSSL-3.6,
support the use of CMS_NOATTR with ML-DSA, so the prohibition against using
signedAttrs with module signing has to be removed. The selected digest
then applies only to the algorithm used to calculate the digest stored in
the messageDigest attribute. The OpenSSL development branch has patches
applied that fix this[1], but it appears that that will only be available
in OpenSSL-4.
[1] https://github.com/openssl/openssl/pull/28923
sign-file won't set CMS_NOATTR if openssl is earlier than v4, resulting in
the use of signed attributes.
The ML-DSA algorithm takes the raw data to be signed without regard to what
digest algorithm is specified in the CMS message. The CMS specified digest
algorithm is ignored unless signedAttrs are used; in such a case, only
SHA512 is permitted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Translate the "Obtain a current source tree" section in
Documentation/translations/ja_JP/process/submitting-patches.rst.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260127130155.16935-1-weibu@redadmin.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.20/v7.0 (#3)
A set of small features and cleanups for the next merge window.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
|
|
"userspace" was misspelled as "userpace".
Signed-off-by: Gabriel Whigham <gabewhigham@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260130042131.51975-1-gabewhigham@gmail.com>
|
|
The entry in proc.rst for 3.14 is missing the closing ">" of the "pid"
field for the ksm_stat file. Add this for both the table of contents and
the actual header for the "ksm_stat" file.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Böhler <witcher@wiredspace.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260131-ksm_stat-v2-1-a8fea12d604e@wiredspace.de>
|
|
The "E" alludes to the fact that FriendlyElec's HD702E is actually an
eDP panel - move its compatible to the appropriate binding doc.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/c7f6f75d55a4801eab63a0dc81d14ae27866aca9.1769191673.git.robin.murphy@arm.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.20/7.0 cycle.
Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.
One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.
Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.
We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.
New Device Support
==================
adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.
Features
========
iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)
Cleanup and Minor Fixes
=======================
More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.
Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.
adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.
* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...
|
|
Add a binding for the Anbernic RG-DS Amplifier, which is an Awinic
aw87391 audio amplifier. This manufacturer did not provide firmware
so we have to use a list of init commands instead, requiring device
specific functionality rather than generic aw87391 functionality.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260128174608.1498-2-macroalpha82@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the ADI AXI SPI engine binding for multiple data lanes. This SPI
controller has a capability to read multiple data words at the same
time (e.g. for use with simultaneous sampling ADCs). The current FPGA
implementation can support up to 8 data lanes at a time (depending on a
compile-time configuration option).
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-6-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new page to Documentation/spi/ describing how multi-lane SPI
support works. This is uncommon functionality so it deserves its own
documentation page.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-5-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add spi-tx-lane-map and spi-rx-lane-map properties to the SPI peripheral
device tree binding. These properties allow specifying the mapping of
peripheral data lanes to controller data lanes. This is needed e.g. when
some lanes are skipped on the controller side so that the controller
can correctly route data to/from the peripheral.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-2-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change spi-rx-bus-width and spi-tx-bus-width properties from single
uint32 values to arrays of uint32 values. This allows describing SPI
peripherals connected to controllers that have multiple data lanes for
receiving or transmitting two or more words in parallel.
Each index in the array corresponds to a physical data lane (one or more
wires depending on the bus width). Additional mapping properties will be
needed in cases where a lane on the controller or peripheral is skipped.
Bindings that make use of this property are updated in the same commit
to avoid validation errors.
The adi,ad4030 binding can now better describe the chips multi-lane
capabilities, so that binding is refined and gets a new example.
Converting from single uint32 to array of uint32 does not break .dts/
.dtb files since there is no difference between specifying a single
uint32 value and an array with a single uint32 value in devicetree.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-1-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string for the mailbox controller found in the UMS9230
SoC.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Problem
=======
Commit 658eb5ab916d ("delayacct: add delay max to record delay peak")
introduced the delay max for getdelays, which records abnormal latency
peaks and helps us understand the magnitude of such delays. However, the
peak latency value alone is insufficient for effective root cause
analysis. Without the precise timestamp of when the peak occurred, we
still lack the critical context needed to correlate it with other system
events.
Solution
========
To address this, we need to additionally record a precise timestamp when
the maximum latency occurs. By correlating this timestamp with system
logs and monitoring metrics, we can identify processes with abnormal
resource usage at the same moment, which can help us to pinpoint root
causes.
Use Case
========
bash-4.4# ./getdelays -d -t 227
print delayacct stats ON
TGID 227
CPU count real total virtual total delay total delay average delay max delay min delay max timestamp
46 188000000 192348334 4098012 0.089ms 0.429260ms 0.051205ms 2026-01-15T15:06:58
IO count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
SWAP count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
RECLAIM count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
THRAS HING count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
COMPACT count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
WPCOPY count delay total delay average delay max delay min delay max timestamp
182 19413338 0.107ms 0.547353ms 0.022462ms 2026-01-15T15:05:24
IRQ count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
Link: https://lkml.kernel.org/r/20260119100241520gWubW8-5QfhSf9gjqcc_E@zte.com.cn
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The macro is related to sysfs, but is defined in kernel.h. Move it to the
proper header, and unload the generic kernel.h.
Now that the macro is removed from kernel.h, linux/moduleparam.h is
decoupled, and kernel.h inclusion can be removed.
Link: https://lkml.kernel.org/r/20260116042510.241009-4-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some versions of tools that apply patches incorrectly allow lines that
start with 3 dashes and have additional content on the same line.
Checkpatch will now emit an ERROR on these lines and optionally convert
those lines from dashes to equals with --fix.
Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Ian Rogers <irogers@google.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The DAMON performance tests [1] use PARSEC 3.0 as its major test
workloads. But the official web site for PARSEC 3.0 has gone, so there is
no easy way to get the benchmark. Mainly due to the fact, DAMON
performance tests are difficult to run, and effectively broken. Do not
request running it for now. Instead, suggest running any benchmarks or
real world workloads that make sense for performance changes.
[1] https://github.com/damonitor/damon-tests/tree/master/perf
Link: https://lkml.kernel.org/r/20260118180305.70023-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 9044cbe50a70 ("MAINTAINERS: rename DAMON section") renamed the
section for DAMON from "DATA ACCESS MONITOR" to "DAMON". But the commit
forgot updating the name on the maintainer-profile document. Update.
Link: https://lkml.kernel.org/r/20260118180305.70023-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS stats on sysfs was only manually updated. Recent addition of
'refresh_ms' knob enabled periodic and automated updates of the stats.
The document for stats update process is not updated for the change,
however. Update.
Link: https://lkml.kernel.org/r/20260118180305.70023-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON usage document provides a list of available DAMON interfaces with
brief introduction at the beginning of the doc. The list is missing DAMON
modules for special purposes, while it is one of the major suggested
interfaces. Add an item for those to the list.
Link: https://lkml.kernel.org/r/20260118180305.70023-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Design document's special-purpose DAMON modules section is providing the
list of links to the usage documents of existing DAMON modules. It is
missing the link for DAMON_STAT, though. Add the missed link.
Link: https://lkml.kernel.org/r/20260118180305.70023-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
People sometimes get confused about the purposes of DAMON special-purpose
modules and sample modules. Clarify those on the design document by
adding a section describing their existence and purposes.
Link: https://lkml.kernel.org/r/20260118180305.70023-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The document is introducing Fedora as one way to get DAMON user-space tool
(damo) from OS-providing packaging system. Linux distros more than Fedora
are providing damo with their packaging systems, though. Replace the
Fedora part with the repology.org page that shows damo packaging status
for multiple Linux distros.
Link: https://lkml.kernel.org/r/20260118180305.70023-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Docs/mm/damon: update intro, modules, maintainer profile,
and misc".
Update DAMON documentations for wordsmithing, clarifications, and
miscellaneous outdated things with eight patches. Patch 1 simplifies the
brief introduction of DAMON. Patch 2 updates DAMON user-space tool
packaged distros information on design doc to include not only Fedora, but
refer to repology. Three following patches update design and usage
documents for clarifying DAMON sample modules purposes (patch 3), and
outdated information about usages of DAMON modules (patches 4 and 5).
Final three patches update usage and maintainer-profile for sysfs
refresh_ms feature behavior (patch 6), synchronize DAMON MAINTAINERS
section name (patch 7), and broken damon-tests performance tests (patch
8).
This patch (of 8):
The intro is a bit verbose and redundant. Simplify it by replacing
details with more links to the design docs, and refining the design points
list.
Link: https://lkml.kernel.org/r/20260118180305.70023-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20260118180305.70023-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While compaction depends on migration, the other direction is not the
case. So let's make it clearer that this is all about migration of
balloon pages.
Adjust all comments/docs in the core to talk about "migration" instead of
"compaction".
While at it add some "/* CONFIG_BALLOON_MIGRATION */".
Link: https://lkml.kernel.org/r/20260119230133.3551867-23-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even without CONFIG_BALLOON_COMPACTION this infrastructure implements
basic list and page management for a memory balloon.
Link: https://lkml.kernel.org/r/20260119230133.3551867-21-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-01-31
This first 2 patches are by Biju Das, target the rcar_canfd driver and
add support for FD-only mode.
Lad Prabhakar's patches, also for the rcar_canfd driver add support
for the RZ/T2H SoC.
The last 2 patches are by Michael Tretter and me, target the sja1000
driver and clean up the CAN state handling.
* tag 'linux-can-next-for-6.20-20260131' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: sja1000: sja1000_err(): use error counter for error state
can: sja1000: sja1000_err(): make use of sja1000_get_berr_counter() to read error counters
can: rcar_canfd: Add RZ/T2H support
dt-bindings: can: renesas,rcar-canfd: Document RZ/T2H and RZ/N2H SoCs
dt-bindings: can: renesas,rcar-canfd: Document RZ/V2H(P) and RZ/V2N SoCs
dt-bindings: can: renesas,rcar-canfd: Specify reset-names
can: rcar_canfd: Add support for FD-Only mode
dt-bindings: can: renesas,rcar-canfd: Document renesas,fd-only property
====================
Link: https://patch.msgid.link/20260131101512.1958907-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few device-specific fixes; all small and mostly trivial, should
be pretty safe to take at the late stage"
* tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion
ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO
ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2
ALSA: hda/realtek: Add quirk for Inspur S14-G1
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
ALSA: hda/realtek - fixed speaker no sound
ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list
ASoC: fsl: imx-card: Do not force slot width to sample width
ASoC: dt-bindings: fsl,sai: Add support for i.MX952 platform
ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel
|
|
Use EC_CMD_PWM_GET_FAN_TARGET_RPM to retrieve the target fan speed.
The EC only supports this for the first fan.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-2-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The wall of text of supported features is hard to read and messy to
extend. Split it into a definition list with an explanations for each
supported feature.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-1-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update the hwmon driver documentation for sensors: P3T1035 and P3T2030.
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Link: https://lore.kernel.org/r/20260119040459.2898998-3-mayankmahajan.x@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document the NXP P3T1035 and P3T2030 compatibles in TMP108.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Link: https://lore.kernel.org/r/20260119040459.2898998-1-mayankmahajan.x@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for STEF48H28 hot-swap controller.
Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com>
Link: https://lore.kernel.org/r/20260126063712.1049025-2-hsu.yungteng@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device tree bindings for the hot-swap controller STEF48H28.
Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260126063712.1049025-1-hsu.yungteng@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
GPD Micro PC 2 is a mobile productivity device with 7-inch screen and
abundant ports.[1]
Link: https://www.gpd.hk/gpdmicropc2345345345 #1
Co-developed-by: kylon <3252255+kylon@users.noreply.github.com>
Signed-off-by: kylon <3252255+kylon@users.noreply.github.com>
Tested-by: kylon <3252255+kylon@users.noreply.github.com>
Link: https://github.com/Cryolitia/gpd-fan-driver/pull/23
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://lore.kernel.org/r/20251222-mpc2-v1-1-695d8d351cc1@uniontech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update the coretemp documentation to reflect current driver capabilities:
- Extend the supported CPU model list to include Atom processors from
Bonnell through Jasper Lake, maintaining the original format with
model numbers and adding X86_FEATURE_DTHERM as the actual detection
mechanism. Added models: 0x37 (Bay Trail), 0x4a (Merrifield),
0x4c (Cherry Trail), 0x5a (Moorefield), 0x5c (Apollo Lake),
0x7a (Gemini Lake), 0x96 (Elkhart Lake), 0x9c (Jasper Lake)
- Update the description to note that per-package temperature sensing
is available on Sandy Bridge and all newer processors
- Clarify that TjMax is read from MSR_IA32_TEMPERATURE_TARGET on modern
CPUs (Nehalem and newer)
- Add TjMax values for newer Atom processor families to Appendix A:
- 22nm Silvermont/Bay Trail: E38xx at 110C, Z37xx at 90C
- 22nm Silvermont/Moorefield: Z35xx at 90C
- 14nm Airmont/Cherry Trail: Z8xxx at 90C
- 14nm Goldmont/Apollo Lake: 105C
- 14nm Goldmont Plus/Gemini Lake: 105C
- 10nm Tremont/Elkhart Lake: 105C
- 10nm Tremont/Jasper Lake: 105C
TjMax values obtained from Intel ARK and official datasheets:
- E3845: https://www.intel.com/content/www/us/en/products/sku/78475/intel-atom-processor-e3845-2m-cache-1-91-ghz/specifications.html
- Z3600/Z3700: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z36xxx-z37xxx-datasheet-vol-1.pdf
Signed-off-by: Laveesh Bansal <laveeshb@laveeshbansal.com>
Link: https://lore.kernel.org/r/20260106155426.547872-2-laveeshb@laveeshbansal.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the ASpeed fan controller binding to DT schema format.
The '#size-cells' value is 0 rather 1.
Some users define more that 8 fan nodes where 2 fans share a PWM. The
driver seems to let the 2nd fan just overwrite the 1st one. That also
creates some addressing errors in the DT (duplicate addresses and wrong
unit-addresses).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20260109-dev-dt-warnings-hwmon-v1-1-f2a84cdb0e1b@codeconstruct.com.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for customer ID 0x1621 found on ASRock Z590 Taichi
boards using the Nuvoton NCT6686D embedded controller.
This allows the driver to instantiate without requiring the
force=1 module parameter.
Tested on two separate ASRock Z590 Taichi boards, both with
EC firmware version 1.0 build 01/25/21.
Signed-off-by: Anj Duvnjak <avian@extremenerds.net>
Link: https://lore.kernel.org/r/20251222220942.10762-1-avian@extremenerds.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mps mp5926.
Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
Link: https://lore.kernel.org/r/20251219055413.1661-3-Yuxi.Wang@monolithicpower.com
[groeck: Use consistent comment style, and use return value from dev_err_probe()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a device tree bindings for mp5926 device.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
Link: https://lore.kernel.org/r/20251219055413.1661-2-Yuxi.Wang@monolithicpower.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document LAN969x hwmon temperature sensor compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251215163820.1584926-15-robert.marko@sartura.hr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SHT85 is a temperature and humidity sensor with the same interface
as SHT3x.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20251211185842.66084-1-apokusinski01@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adding support for Pro WS TRX50-SAGE WIFI A, which is identical
sensors-wise to Pro WS TRX50-SAGE WIFI
Signed-off-by: Robert McIntyre <rjmcinty@hotmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-4-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG MAXIMUS X HERO. The support is incomplete because
the second EC, which provides part of the data, is inaccessible via the
kernel ec module.
Signed-off-by: Reis Holmes <reisholmes@pm.me>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
macros
The current documentation advises against calculations in macros
primarily to avoid code obfuscation. It misses the risk of concurrency
issues.
Add a note explaining that macros evaluating arguments multiple times
can lead to race conditions when accessing shared data.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251202175536.12774-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If userspace thread has held f2fs rw semaphore, due to its low priority,
it could be runnable or preempted state for long time, during the time,
it will block high priority thread which is trying to grab the same rw
semaphore, e.g. cp_rwsem, io_rwsem...
To fix such issue, let's detect thread's priority when it tries to grab
f2fs_rwsem lock, if the priority is lower than a priority threshold, let's
uplift the priority before it enters into critical region of lock, and
restore the priority after it leaves from critical region.
Meanwhile, introducing two new sysfs nodes:
- /sys/fs/f2fs/<disk>/adjust_lock_priority, it is used to control whether
the functionality is enable or not.
========== ==================
Flag_Value Flag_Description
========== ==================
0x00000000 Disabled (default)
0x00000001 cp_rwsem
0x00000002 node_change
0x00000004 node_write
0x00000008 gc_lock
0x00000010 cp_global
0x00000020 io_rwsem
========== ==================
- /sys/fs/f2fs/<disk>/lock_duration_priority, it is used to control
priority threshold.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Document Microchip LAN969x SHA compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
