| Age | Commit message (Collapse) | Author |
|---|
|
Commit 02c057ddefef ("ACPI: video: Convert the driver to a platform one")
switched over the ACPI video bus driver from an ACPI driver to a platform
driver, but that change introduced an unwanted and unexpected side effect.
Namely, on some systems, the ACPI device object of the ACPI video bus
device is an ACPI companion of multiple platform devices and, after
adding video_device_ids[] as an acpi_match_table to the acpi_video_bus
platform driver, all of those devices started to match that driver and
its probe callback is invoked for all of them (it fails, but it leaves
a confusing message in the log). Moreover, the MODULE_DEVICE_TABLE()
of the ACPI video driver module matches all of the devices sharing the
ACPI companion with the ACPI video bus device.
To address this, make the core ACPI device enumeration code create an
auxiliary device for the ACPI video bus device object instead of a
platform device and switch over the ACPI video bus driver (once more)
to an auxiliary driver.
Auxiliary driver generally is a better match for ACPI video bus than
platform driver, among other things because the ACPI video bus device
does not require any resources to be allocated for it during
enumeration. It also allows the ACPI video bus driver to stop abusing
device matching based on ACPI device IDs and it allows a special case
to be dropped from acpi_create_platform_device() because that function
need not worry about the ACPI video bus device any more.
Fixes: 02c057ddefef ("ACPI: video: Convert the driver to a platform one")
Reported-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Closes: https://lore.kernel.org/linux-acpi/007e3390-6b2b-457e-83c7-c794c5952018@amd.com/
Tested-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Added AUXILIARY_BUS selection to CONFIG_ACPI to fix build issue ]
[ rjw: Fixed error path in acpi_create_video_bus_device() ]
Link: https://patch.msgid.link/5986516.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use acpi_dev_install_notify_handler() and acpi_dev_remove_notify_handler()
for installing and removing the ACPI notify handler, respectively, which
allows acpi_pad_notify() and acpi_pad_remove() to be simplified quite a
bit.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2011993.taCxCBeP46@rafael.j.wysocki
|
|
Drop unnecessary forward declarations of 4 functions and move the
SIMPLE_DEV_PM_OPS() definition after the definition of the resume
callback function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3757869.R56niFO833@rafael.j.wysocki
|
|
The inner loop in flatten_lpi_states() that combines composite LPI
states can increment flat_state_cnt multiple times within the loop.
The condition that guards this (checks bounds against ACPI_PROCESSOR
_MAX_POWER) occurs at the top of the outer loop. flat_state_cnt might
exceed ACPI_PROCESSOR_MAX_POWER if it is incremented multiple times
within the inner loop between outer loop iterations.
Add a bounds check after the increment inside the inner loop so that
it breaks out when flat_state_cnt reaches ACPI_PROCESSOR_MAX_POWER.
The existing check in the outer loop will then handle the warning.
Signed-off-by: Jingkai Tan <contact@jingk.ai>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260305213831.53985-1-contact@jingk.ai
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of embedding a list_head in struct semaphore, store a pointer to
the first waiter. The list of waiters remains a doubly linked list so
we can efficiently add to the tail of the list and remove from the front
(or middle) of the list.
Some of the list manipulation becomes more complicated, but it's a
reasonable tradeoff on the slow paths to shrink data structures
which embed a semaphore.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260305195545.3707590-3-willy@infradead.org
|
|
Currently, the `Reference Performance` register is read every time
the CPU frequency is sampled in `cppc_get_perf_ctrs()`. This function
is on the hot path of the cppc_cpufreq driver.
Reference Performance indicates the performance level that corresponds
to the Reference Counter incrementing and is not expected to change
dynamically during runtime (unlike the Delivered and Reference counters).
Reading this register in the hot path incurs unnecessary overhead,
particularly on platforms where CPC registers are located in the PCC
(Platform Communication Channel) subspace. This patch moves
`reference_perf` from the dynamic feedback counters structure
(`cppc_perf_fb_ctrs`) to the static capabilities structure
(`cppc_perf_caps`).
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
[ rjw: Changelog adjustment ]
Link: https://patch.msgid.link/20260213100935.19111-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge a fix updating the _CPC object definition in ACPICA to avoid
printing a false-positive output package format warning on new
platforms (Saket Dumbre)
* acpica:
ACPICA: Update the _CPC definition to match ACPI 6.6
|
|
Revert commit 88fad6ce090b ("ACPI: PM: Let acpi_dev_pm_attach() skip
devices without ACPI PM") that introduced a SoundWire suspend regression
[1].
It is actually not true that the commit above doesn't make a functional
difference because acpi_subsys_suspend(), for example, may resume
devices in runtime-suspend which affects the subsequent handling of
those devices during the suspend transition. For this reason, the
devices that were handled by the ACPI PM domain before that commit may
be handled differently now which may lead to suspend-resume issues.
Fixes: 88fad6ce090b ("ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM")
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Closes: https://github.com/thesofproject/linux/pull/5677#issuecomment-3984375077 [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2829615.mvXUDI8C0e@rafael.j.wysocki
|
|
Update the _CPC definition to also support return package sub-type of
a Package (with Integer and Buffer) as per ACPI Spec 6.6.
Link: https://github.com/acpica/acpica/commit/17a761944cc2
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2829238.mvXUDI8C0e@rafael.j.wysocki
|
|
The ACPI spec states that the operating system should respond
to a fatal ACPI error by "performing a controlled OS shutdown in
a timely fashion". Comply with the ACPI specification by powering
off the system when ACPICA signals a fatal ACPI error. Users can
still disable this behavior by using the acpi.poweroff_on_fatal
kernel option to work around firmware bugs.
Link: https://uefi.org/specs/ACPI/6.6/19_ASL_Reference.html#fatal-fatal-error-check
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Dropped the new Kconfig option, adjusted header file inclusions ]
Link: https://patch.msgid.link/20260204212931.3860-1-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add sysfs interface to read/write the Performance Limited register.
The Performance Limited register indicates to the OS that an
unpredictable event (like thermal throttling) has limited processor
performance. It contains two sticky bits set by the platform:
- Bit 0 (Desired_Excursion): Set when delivered performance is
constrained below desired performance. Not used when Autonomous
Selection is enabled.
- Bit 1 (Minimum_Excursion): Set when delivered performance is
constrained below minimum performance.
These bits remain set until OSPM explicitly clears them. The write
operation accepts a bitmask of bits to clear:
- Write 0x1 to clear bit 0
- Write 0x2 to clear bit 1
- Write 0x3 to clear both bits
This enables users to detect if platform throttling impacted a workload.
Users clear the register before execution, run the workload, then check
afterward - if set, hardware throttling occurred during that time window.
The interface is exposed as:
/sys/devices/system/cpu/cpuX/cpufreq/perf_limited
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-7-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Extend cppc_set_epp_perf() to write both auto_sel and energy_perf
registers when they are in FFH or SystemMemory address space.
This keeps the behavior consistent with PCC case where both registers
are already updated together, but was missing for FFH/SystemMemory.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-4-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a warning during CPPC processor probe if the Desired Performance
register is not supported when it should be.
As per 8.4.6.1.2.3 section of ACPI 6.6 specification,
"The Desired Performance Register is optional only when OSPM indicates
support for CPPC2 in the platform-wide _OSC capabilities and the
Autonomous Selection Enable field is encoded as an Integer with a
value of 1."
In other words:
- In CPPC v1, DESIRED_PERF is mandatory
- In CPPC v2, it becomes optional only when AUTO_SEL_ENABLE is supported
This helps detect firmware configuration issues early during boot.
Link: https://lore.kernel.org/lkml/9fa21599-004a-4af8-acc2-190fd0404e35@nvidia.com/
Suggested-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-3-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add cppc_get_perf() function to read values of performance control
registers including desired_perf, min_perf, max_perf, energy_perf,
and auto_sel.
This provides a read interface to complement the existing
cppc_set_perf() write interface for performance control registers.
Note that auto_sel is read by cppc_get_perf() but not written by
cppc_set_perf() to avoid unintended mode changes during performance
updates. It can be updated with existing dedicated cppc_set_auto_sel()
API.
Use cppc_get_perf() in cppc_cpufreq_get_cpu_data() to initialize
perf_ctrls with current hardware register values during cpufreq
policy initialization.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260206142658.72583-2-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a quirk for Lenovo G70-35 to save the ACPI NVS memory on system
suspend (Piotr Mazek)
* acpi-pm:
ACPI: PM: Save NVS memory on Lenovo G70-35
|
|
On x86, as a rule the CMOS RTC address space handler is set up by the
CMOS RTC ACPI scan handler attach callback, acpi_cmos_rtc_attach(),
but if the ACPI namespace does not contain a CMOS RTC device object,
the CMOS RTC address space handler installation is taken care of the
ACPI TAD (Timer and Alarm Device) driver.
This is not particularly straightforward and can be avoided by adding
the ACPI TAD device ID to the CMOS RTC ACPI scan handler which will
cause it to create a platform device for ACPI TAD after installing
the CMOS RTC address space handler. One related detail that needs to
be taken care of, though, is that the creation of an ACPI TAD platform
device should not cause cmos_rtc_platform_device_present to be set,
since this may cause add_rtc_cmos() to suppress the creation of a
fallback CMOS RTC platform device which may not be the right thing
to do (for instance, due to the fact that the ACPI TAD driver is
missing an RTC class device interface).
After doing the above, the CMOS RTC address space handler installation
and removal can be dropped from the ACPI TAD driver (which allows it to
be simplified quite a bit), acpi_remove_cmos_rtc_space_handler() can
be dropped and acpi_install_cmos_rtc_space_handler() can be made static.
Update the code as per the above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/23028644.EfDdHjke4D@rafael.j.wysocki
|
|
A previous change updated is_cmos_rtc_device() to effectively never
allow PNP devices to be created for the CMOS RTC on x86 with ACPI
and the PNP bus type is only used on x86, so the CMOS RTC device IDs
can be dropped from acpi_pnp_device_ids[] and is_cmos_rtc_device() can
go away completely.
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3411834.aeNJFYEL58@rafael.j.wysocki
|
|
Modify the rtc-cmos driver to bind to a platform device on systems with
ACPI via acpi_match_table and advertise the CMOST RTC ACPI device IDs
for driver auto-loading. Note that adding the requisite device IDs to
it and exposing them via MODULE_DEVICE_TABLE() is sufficient for this
purpose.
Since the ACPI device IDs in question are the same as for the CMOS RTC
ACPI scan handler, put them into a common header file and use the
definition from there in both places.
Additionally, to prevent a PNP device from being created for the CMOS
RTC if a platform one is present already, make is_cmos_rtc_device()
check cmos_rtc_platform_device_present introduced previously.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/13969123.uLZWGnKmhe@rafael.j.wysocki
|
|
Make the CMOS RTC ACPI scan handler create a platform device that will
be used subsequently by rtc-cmos for driver binding on x86 systems with
ACPI and update add_rtc_cmos() to skip registering a fallback platform
device for the CMOS RTC when the above one has been registered.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # x86
Link: https://patch.msgid.link/1962427.tdWV9SEqCh@rafael.j.wysocki
|
|
The screen backlight turns off during boot (specifically during udev device
initialization) when returning true for _OSI("Windows 2009").
Analyzing the device's DSDT reveals that the firmware takes a different
code path when Windows 7 is reported, which leads to the backlight shutoff.
Add a DMI quirk to invoke dmi_disable_osi_win7 for this model.
Signed-off-by: Sofia Schneider <sofia@schn.dev>
Link: https://patch.msgid.link/20260223025240.518509-1-sofia@schn.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a CMOS RTC (PNP0B00/PNP0B01/PNP0B02) device coexists with an ACPI
TAD (timer and event alarm device, ACPI000E), the ACPI TAD driver will
attempt to install the CMOS RTC address space hanlder that has been
installed already and the TAD probing will fail.
Avoid that by changing acpi_install_cmos_rtc_space_handler() to return
zero and acpi_remove_cmos_rtc_space_handler() to do nothing if the CMOS
RTC address space handler has been installed already.
Fixes: 596ca52a56da ("ACPI: TAD: Install SystemCMOS address space handler for ACPI000E")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2415111.ElGaqSPkdT@rafael.j.wysocki
|
|
Make multiple changes that do not alter functionality to the CMOS RTC
ACPI address space handler driver, including the following:
- Drop the unused .detach() callback from cmos_rtc_handler.
- Rename acpi_cmos_rtc_attach_handler() to acpi_cmos_rtc_attach().
- Rearrange acpi_cmos_rtc_space_handler() to reduce the number of
redundant checks and make white space follow the coding style.
- Adjust an error message in acpi_install_cmos_rtc_space_handler()
and make the white space follow the coding style.
- Rearrange acpi_remove_cmos_rtc_space_handler() and adjust an error
message in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5094429.31r3eYUQgx@rafael.j.wysocki
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
[821d6f0359b0614792ab8e2fb93b503e25a65079] prevented machines
produced later than 2012 from saving NVS region to accelerate S3.
Despite being made after 2012, Lenovo G70-35 still needs NVS memory
saving during S3. A quirk is introduced for this platform.
Signed-off-by: Piotr Mazek <pmazek@outlook.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/GV2PPF3CD5B63CC2442EE3F76F8443EAD90D499A@GV2PPF3CD5B63CC.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI support updates from Rafael J. Wysocki:
"These are mostly fixes and cleanups on top of the ACPI support updates
merged recently, including two new quirks, an ACPI CPPC library fix,
and fixes and cleanups of a few core ACPI device drivers:
- Add an unused power resource handling quirk for THUNDEROBOT ZERO
(Zhai Can)
- Fix remaining for_each_possible_cpu() in the ACPI CPPC library to
use online CPUs (Sean V Kelley)
- Drop redundant checks from the ACPI notify handler and the driver
remove callback in the ACPI battery driver (Rafael Wysocki)
- Move the creation of the wakeup source during the ACPI button
driver probe to an earlier point to avoid missing a wakeup event
due to a race and clean up system wakeup handling and remove
callback in that driver (Rafael Wysocki)
- Drop unnecessary driver_data pointer clearing from the ACPI EC and
SMBUS HC drivers and make the ACPI backlight (video) driver clear
the device's driver_data pointer on remove (Rafael Wysocki)
- Force enabling of PWM2 on the Yogabook YB1-X90 tablets (Yauhen
Kharuzhy)"
* tag 'acpi-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Add unused power resource quirk for THUNDEROBOT ZERO
ACPI: driver: Drop driver_data pointer clearing from two drivers
ACPI: video: Clear driver_data pointer on remove
ACPI: button: Tweak acpi_button_remove()
ACPI: button: Tweak system wakeup handling
ACPI: battery: Drop redundant checks from acpi_battery_remove()
ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs
ACPI: x86: Force enabling of PWM2 on the Yogabook YB1-X90
ACPI: button: Call device_init_wakeup() earlier during probe
ACPI: battery: Drop redundant check from acpi_battery_notify()
|
|
Merge additional updates of multiple core ACPI device drivers (battery,
button, video, EC, SMBUS HC) for 7.0-rc1:
- Drop redundant checks from the ACPI notify handler and the driver
remove callback in the ACPI battery driver (Rafael Wysocki)
- Move the creation of the wakeup source during the ACPI button driver
probe to an earlier point to avoid missing a wakeup event due to a
race and clean up system wakeup handling and remove callback in that
driver (Rafael Wysocki)
- Drop unnecessary driver_data pointer clearing from the ACPI EC and
SMBUS HC drivers and make the ACPI backlight (video) driver clear the
device's driver_data pointer on remove (Rafael Wysocki)
* acpi-battery:
ACPI: battery: Drop redundant checks from acpi_battery_remove()
ACPI: battery: Drop redundant check from acpi_battery_notify()
* acpi-button:
ACPI: button: Tweak acpi_button_remove()
ACPI: button: Tweak system wakeup handling
ACPI: button: Call device_init_wakeup() earlier during probe
* acpi-driver:
ACPI: driver: Drop driver_data pointer clearing from two drivers
ACPI: video: Clear driver_data pointer on remove
|
|
Merge an ACPI power management update and an ACPI CPPC library update
for 7.0-rc1:
- Add an unused power resource handling quirk for THUNDEROBOT ZERO (Zhai
Can)
- Fix remaining for_each_possible_cpu() in the ACPI CPPC library to use
online CPUs (Sean V Kelley)
* acpi-pm:
ACPI: PM: Add unused power resource quirk for THUNDEROBOT ZERO
* acpi-cppc:
ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs
|
|
On the THUNDEROBOT ZERO laptop, the second NVMe slot and the discrete
NVIDIA GPU are both controlled by power-resource PXP. Due to the SSDT table
bug (lack of reference), PXP will be shut dow as an "unused" power resource
during initialization, making the NVMe slot #2 + NVIDIA both inaccessible.
This issue was introduced by commit a1224f34d72a ("ACPI: PM: Check
states of power resources during initialization"). Here are test
results on the three consecutive commits:
(bad again!) a1224f34d72a ACPI: PM: Check states of power resources during initialization
(good) bc2836859643 ACPI: PM: Do not turn off power resources in unknown state
(bad) 519d81956ee2 Linux 5.15-rc6
On commit bc2836859643 ("ACPI: PM: Do not turn off power resources in
unknown state") this was not an issue because the power resource state
left UNKNOWN thus being ignored.
See also commit 9b04d99788cf ("ACPI: PM: Do not turn of unused power
resources on the Toshiba Click Mini") which is another almost identical
case to this one.
Fixes: a1224f34d72a ("ACPI: PM: Check states of power resources during initialization")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221087
Signed-off-by: Zhai Can <bczhc0@126.com>
Link: https://patch.msgid.link/20260214161452.2849346-1-bczhc0@126.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is not necessary to clear the driver_data pointer in the ACPI
companion device object on driver remove in the EC and SMBUS HC
ACPI drivers because that pointer is not used there any more after
recent changes.
Drop the unnecessary statements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6242843.lOV4Wx5bFT@rafael.j.wysocki
|
|
After commit 02c057ddefef ("ACPI: video: Convert the driver to a
platform one") the driver_data pointer in the ACPI companion device
object is not cleared automatically on driver remove any more, so
clear it directly in acpi_video_bus_remove().
Fixes: 02c057ddefef ("ACPI: video: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12840288.O9o76ZdvQC@rafael.j.wysocki
|
|
Modify acpi_button_remove() to get the ACPI device object pointer
from button->adev instead of retrieving it with the help of the
ACPI_COMPANION() macro to reduce overhead slightly.
While at it, rename the struct acpi_device pointer variable in
acpi_button_remove() to adev.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13948466.uLZWGnKmhe@rafael.j.wysocki
|
|
Modify struct acpi_button to hold a struct device pointer instead
of a struct platform_device one to avoid unnecessary pointer
dereferences and use that pointer consistently for system wakeup
initialization, handling and cleanup.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1948258.tdWV9SEqCh@rafael.j.wysocki
|
|
In acpi_battery_remove(), "battery" cannot be NULL because it is the
driver data of the platform device passed to that function and it has
been set by acpi_battery_probe(), so drop the redundant check of it
against NULL.
Moreover, getting the ACPI device pointer from battery->device is
slightly less overhead than using the ACPI_COMPANION() macro on the
platform device to retrieve it, so do that and drop the check of that
pointer against NULL which is also redundant.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12836976.O9o76ZdvQC@rafael.j.wysocki
|
|
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However, send_pcc_cmd() and acpi_get_psd_map() still iterate over all
possible CPUs. In acpi_get_psd_map(), encountering an offline CPU
returns -EFAULT, causing cppc_cpufreq initialization to fail.
This breaks systems booted with "nosmt" or "nosmt=force".
Fix by using for_each_online_cpu() in both functions.
Fixes: 80b8286aeec0 ("ACPI / CPPC: support for batching CPPC requests")
Signed-off-by: Sean V Kelley <skelley@nvidia.com>
Link: https://patch.msgid.link/20260211212254.30190-1-skelley@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The PWM2 on YB1-X90 tablets is used for keyboard backlight control but
it is disabled in the ACPI DSDT table. Add it to the override_status_ids
list to allow keyboard function control driver
(drivers/platform/x86/lenovo/yogabook.c) to use it.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260211222242.4101162-1-jekhor@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Calling device_init_wakeup() after installing a notify handler in which
wakeup events are signaled may cause a wakeup event to be missed if the
device is probed right before a system suspend.
To avoid this, move the device_init_wakeup() call in acpi_button_probe()
before the notify handler installation and add a corresponding cleanup
to the error path.
Also carry out wakeup cleanup for the button in acpi_button_remove()
because after that point the notify handler will not run for it and
wakeup events coming from it will not be signaled.
Fixes: 0d51157dfaac ("ACPI: button: Eliminate the driver notify callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12854922.O9o76ZdvQC@rafael.j.wysocki
|
|
The battery pointer check against NULL in acpi_battery_notify() is
redundant because the value of that pointer is the one passed to
acpi_dev_install_notify_handler() in acpi_battery_probe() as the
last argument which is not NULL.
Drop the redundant check.
No intentional functional impact.
Closes: https://lore.kernel.org/linux-acpi/aYXvS1h3Bxf_5sCj@stanley.mountain/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5981321.DvuYhMxLoT@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
|
|
Merge ACPI APEI support updates for 6.20-rc1/7.0-rc1:
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
* acpi-apei:
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: extlog: Trace CPER CXL Protocol Error Section
ACPI: APEI: GHES: Add helper to copy CPER CXL protocol error info to work struct
ACPI: APEI: GHES: Add helper for CPER CXL protocol errors checks
ACPI: extlog: Trace CPER PCI Express Error Section
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: APEI: GHES: Improve ghes_notify_sea() status check
ACPI: APEI: GHES: Extract helper functions for error status handling
ACPI: APEI: GHES: Improve ghes_notify_nmi() status check
EFI/CPER: don't dump the entire memory region
APEI/GHES: ensure that won't go past CPER allocated record
EFI/CPER: don't go past the ARM processor CPER record buffer
APEI/GHES: ARM processor Error: don't go past allocated memory
ACPI: APEI: EINJ: make read-only array non_mmio_desc static const
|
|
Merge ACPI processor driver changes for 6.20-rc1/7.0-rc1:
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
* acpi-processor:
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
ACPI: processor: idle: Add debug log for states with invalid entry methods
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: Remove unused empty stubs of some functions
ACPI: processor: idle: Optimize ACPI idle driver registration
|
|
Merge ACPI battery driver changes and a generic ACPI watchdog device
driver change for 6.20-rc1/7.0-rc1:
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
* acpi-battery:
ACPI: battery: fix incorrect charging status when current is zero
ACPI: battery: Convert the driver to a platform one
ACPI: battery: Reduce code duplication related to cleanup
ACPI: battery: Adjust event notification routine
* acpi-misc:
ACPI: acpi_watchdog: use LIST_HEAD for stack-allocated list
|
|
Merge updates of drivers handling devices defined in the ACPI
specification and other generic devices with ACPI interfaces for
6.20-rc1/7.0-rc1:
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
* acpi-driver: (25 commits)
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: scan: Clean up after recent changes
ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons
ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM
ACPI: Documentation: driver-api: Disapprove of using ACPI drivers
ACPI: video: Convert the driver to a platform one
ACPI: video: Adjust event notification routine
ACPI: scan: Register platform devices for backlight device objects
ACPI: SBS: Convert the driver to a platform one
ACPI: SMBUS HC: Convert the driver to a platform one
ACPI: EC: Convert the driver to a platform one
ACPI: EC: Register a platform device for ECDT EC
ACPI: HED: Convert the driver to a platform one
ACPI: thermal: Rework system suspend and resume handling
ACPI: thermal: Convert the driver to a platform one
ACPI: thermal: Adjust event notification routine
ACPI: scan: Register platform devices for thermal zones
ACPI: scan: Do not mark button ACPI devices as wakeup-capable
ACPI: scan: Do not bind ACPI drivers to fixed event buttons
ACPI: tiny-power-button: Convert the driver to a platform one
...
|
|
Merge ACPI support updates related to _OSC evaluation, the handling of
"system resource" device objects, and ACPI-based device enumeration
for 6.20-rc1/7.0-rc1:
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
* acpi-bus:
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: bus: Align acpi_device_get_match_data() with driver match order
ACPI: scan: Drop outdated comment regarding removed function
ACPI: scan: Use resource_type() for resource type checking
ACPI: bus: Fix typo under sizeof() in acpi_run_osc()
ACPI: bus: Adjust acpi_osc_handshake() parameter list
ACPI: bus: Rework the handling of \_SB._OSC USB4 features
ACPI: bus: Adjust feature mask creation for \_SB._OSC
ACPI: bus: Rework the handling of \_SB._OSC platform features
ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc()
ACPI: bus: Split _OSC error processing out of acpi_run_osc()
ACPI: bus: Split _OSC evaluation out of acpi_run_osc()
ACPI: bus: Rework printing debug messages on _OSC errors
ACPI: bus: Fix handling of _OSC errors in acpi_run_osc()
ACPI: PNP: Drop acpi_nonpnp_device_ids[]
platform/x86/intel/vbtn: Stop creating a platform device
platform/x86/intel/hid: Stop creating a platform device
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
|
|
Merge ACPI power management updates, ACPI sysfs interface updates, an
ACPI support update related to PCI, and an ACPI device resources
management update for 6.20-rc1/7.0-rc1:
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
* acpi-pm:
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: PM: Adjust messages regarding postponed ACPI PM
ACPI: x86: s2idle: Remove dead code in lps0_device_attach()
ACPI: PM: Register wakeup sources under physical devices
ACPI: PCI: PM: Rework root bus notification setup
* acpi-sysfs:
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: sysfs: Add device cid attribute for exposing _CID lists
* acpi-pci:
ACPI: PCI: simplify code with acpi_get_local_u64_address()
* acpi-resource:
ACPI: resource: Add JWIPC JVC9100 to irq1_level_low_skip_override[]
|
|
Merge ARM-related irq subsystem changes based on the recent ACPICA
updates for 6.20-rc1/7.0-rc1:
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
* acpi-irq:
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
|
|
Merge ACPICA changes for 6.20-rc1/7.0-rc1:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
* acpica: (26 commits)
ACPICA: Refactor for TPR Base/Limit registers bitmasks
ACPICA: Replace TPRn Base and Limit registers
ACPICA: Logfile: Changes for version 20251212
ACPICA: Align comments in TPRn-related structures
ACPICA: Cleanup comments and DTPR Table handle functions
ACPICA: Verify DTPR and TPR Instance buffer pointers
ACPICA: Fix Segmentation Fault error related to DTPR
ACPICA: Create auxiliary ACPI_TPR_AUX_SR structure for iASL compiler
ACPICA: ACPI 6.6: Add _VDM (Voltage Domain) object
ACPICA: actbl3.h: ACPI 6.6: SRAT: New flag in Memory Affinity Structure
ACPICA: actbl2.h: ACPI 6.6: RAS2: Update Parameter Block structure
ACPICA: Add Arm IORT IWB node definitions
ACPICA: Add GICv5 MADT structures
ACPICA: Fix asltests using the Fatal() opcode
ACPICA: ACPI 6.4: PPTT: include all fields in subtable type1
ACPICA: Abort AML bytecode execution when executing AML_FATAL_OP
ACPICA: Define DTPR structure related info tables and data template
ACPICA: Add DTPR table support for the ASL compiler
ACPICA: iASL: Add definitions for the IOVT table
ACPICA: Add support for the Microsoft display mux _OSI string
...
|
