| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a new internal struct scmi_clock_desc so as to be able to hide,
in the future, some of the needlessly public fields currently kept inside
scmi_clock_info, while keeping exposed only the two new min_rate and
max_rate fields for each clock.
No functional change.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Add a clock operation to help determining the effective rate, closest to
the required one, that a specific clock can support.
Calculation is currently performed kernel side and the logic is taken
directly from the SCMI Clock driver: embedding the determinate rate logic
in the protocol layer enables simplifications in the SCMI Clock protocol
interface and will more easily accommodate further evolutions where such
determine_rate logic into is optionally delegated to the platform SCMI
server.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
PSCI specification defines the SYSTEM_SUSPEND feature which enables the
firmware to implement the suspend to RAM (S2RAM) functionality by
transitioning the system to a deeper low power state. When the system
enters such state, the power to the peripheral devices might be removed. So
the respective device drivers must prepare for the possible removal of the
power by performing actions such as shutting down or resetting the device
in their system suspend callbacks.
The Linux PM framework allows the platform drivers to convey this info to
device drivers by calling the pm_set_suspend_via_firmware() and
pm_set_resume_via_firmware() APIs.
Hence, if the PSCI firmware supports SYSTEM_SUSPEND feature, call the above
mentioned APIs in the psci_system_suspend_begin() and
psci_system_suspend_enter() callbacks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
[mani: reworded the description to be more elaborative]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Raspberry Pi firmware driver has no compile dependencies on the
BCM2835 mailbox driver. It's just a indirect runtime dependency: the
driver only works on a Raspberry Pi.
Change the dependency from BCM2835_MBOX to ARCH_BCM2835. Also allow
compile tests. This allows drivers that have build time dependencies
on this firmware driver to be compile tested as well. More dependencies
are added to account for build time dependencies:
- depends on MAILBOX for mailbox API (not stubbed) usage
- depends on ARM || ARM64 for dsb() usage
Also make it built by default if ARCH_BCM2835, since many functions will
not work without this firmware driver.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260427091058.2669812-1-wenst@chromium.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Modify all CPUID call sites which implicitly include any of the CPUID
headers to explicitly include them instead.
For KVM's reverse_cpuid.h, just include <asm/cpuid/types.h> since it
references the CPUID_EAX..EDX symbols without using the CPUID APIs.
Note, this allows removing the inclusion of <asm/cpuid/api.h> from within
<asm/processor.h> next. That allows the CPUID API headers to include
<asm/processor.h> without introducing a circular dependency.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20260327021645.555257-1-darwi@linutronix.de
|
|
ffa_sched_recv_cb_update() used list_for_each_entry_safe() to search for
a matching partition and then tested the iterator against NULL. That is
not a valid end-of-list check for circular lists and can fall through
with an invalid pointer. Use a normal iterator and detect the not-found
case correctly before touching the partition state.
Fixes: be61da938576 ("firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-11-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Both notification handlers currently look up a notifier callback under
notify_lock, drop the lock, and then dereference the returned
notifier entry. A concurrent unregister can delete and free that
entry in the gap, leaving the handler to dereference stale memory.
Copy the callback pointer and callback data while notify_lock is
still held and invoke the callback only after the lock is dropped.
This keeps the existing callback execution model while removing the
use-after-free window in both the framework and non-framework
notification paths.
Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-10-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Commit 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during
RXTX_MAP") advertises PAGE_ALIGN(rxtx_bufsz) to firmware when mapping the
buffers but the driver continues to stores the minimum FF-A buffer size
in drv_info->rxtx_bufsz which is used elsewhere in the driver.
Align the size before storing it so that the allocation, validation and
FFA_RXTX_MAP all use the same buffer size.
Fixes: 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP")
Cc: Sebastian Ene <sebastianene@google.com>
Link: https://sashiko.dev/#/patchset/20260402113939.930221-1-sebastianene@google.com
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-9-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Framework notifications carry an indirect message in the shared RX
buffer. Validate the reported offset and size before using them, reject
zero-length payloads, and ensure that any non-header payload starts at
the UUID field rather than in the middle of the message header.
Use the validated offset and size values for both kmemdup() and the UUID
parsing path so malformed firmware data cannot drive an out-of-bounds
read or an oversized allocation.
Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-8-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The framework notification handler drops rx_lock before issuing
FFA_RX_RELEASE, leaving a window where another RX-buffer user can
start a new FF-A transaction before ownership has actually been
returned to firmware.
Move the FFA_RX_RELEASE calls so they execute while rx_lock is still
held on both the kmemdup() failure path and the normal success path.
While doing that, switch the handler to scoped_guard() to keep the
critical section explicit.
Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-7-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
Fixes: ba85c644ac8d ("firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-6-8595ae450034@kernel.org
(fixed cur_idx when exactly one descriptor in the first fragment)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Simplify the loop in scmi_handle_get() by using list_for_each_entry().
Suggested-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/bccbd4a64ef4619afd5454e9e533073b00aeaba6.1775205358.git.geert+renesas@glider.be
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The current table entry is assigned in both the init and loop
expressions of the for-statement. Merge this into a single assignment
in the conditional expression, to simplify the code.
While at it, make the loop counter unsigned and loop-local.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8577f4b103cf04420c3b67dcaad528daff867287.1775205358.git.geert+renesas@glider.be
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
When a range contains only an end ("-X"), the number string is parsed
twice, as both "sep == first" and "sep != last" are true. Fix this by
dropping the superfluous number parsing for "sep == first".
This does have a harmless functional impact for the unbounded range:
"-" is now accepted, while it was rejected before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/fe257b3b7b7b5c17fd0e5727bb9746c731bd7e3c.1775205358.git.geert+renesas@glider.be
(sudeep.holla: Initialise ret to 0 as it will be uninitialise for "-" range)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Rename struct scmi_revision_info to struct scmi_base_info , to
accurately represent its content. The scmi_revision_info is no
longer accurate, because the structure now contains more than
only SCMI base protocol revision, it now also contains number
of protocols, agents, vendor and subvendor strings. All those
are fetched from the base protocol, so rename the structure to
scmi_base_info, to match the other scmi_*_info structure names.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260406155343.72087-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Add reset reason string table for i.MX95 and introduce a helper
(scmi_imx_misc_get_reason) to query and print both system and LM
(Logical Machine) reset reasons via the SCMI MISC protocol.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260305-scmi-imx-reset-v1-2-18de78978ba9@nxp.com
Acked-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
MISC protocol supports getting reset reason per Logical Machine or
System. Add the API for user to retrieve the information from System
Manager.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260305-scmi-imx-reset-v1-1-18de78978ba9@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
coreboot_table_populate() registers devices one by one. If
device_register() fails for one entry, the current code returns
immediately, leaving previously registered devices orphaned on the
coreboot bus with no cleanup path.
Since coreboot table entries are independent of each other, a failure
on one entry should not prevent the others from being registered.
This mirrors the strategy used by of_platform_populate(), which skips
individual failures rather than aborting.
Move ptr_entry increment before device_register(), log a warning on
failure, and continue the loop rather than aborting.
Signed-off-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20260501094322.123160-1-titouan.ameline@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Change INTEL_SIP_SMC_FCS_GET_PROVISION_DATA's SMC call to async from sync
to avoid long runtime which may cause the watchdog timeout issue.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Use a flexible array member to combine allocations. Simplifies memory
management.
Add __counted_by for extra runtime analysis. Also move counting variable
assignment up as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The remote state is set to RPROC_DETACHED if the resource table is found
in the memory. However, this can be wrong if the remote is not started,
but firmware is still loaded in the memory. Use PM_GET_NODE_STATUS call
to the firmware to request the state of the RPU node. If the RPU is
actually out of reset and running, only then move the remote state to
RPROC_DETACHED, otherwise keep the remote state to RPROC_OFFLINE.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Fixes: bca4b02ef92e ("remoteproc: xlnx: Add attach detach support")
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20260428221855.313752-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
For FF-A v1.0 the driver registers a bus notifier to backfill UUID
matching, but the notifier was never unregistered on cleanup paths.
Track the registration state and unregister it during teardown and early
partition-setup failure.
Fixes: 9dd15934f60d ("firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-5-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Per-vcpu notification handling already runs from a per-cpu work item on
the target cpu. Routing that path back through smp_call_function_single()
re-enters the call-function IPI path and executes the notification
handler with interrupts disabled. That makes the framework path unsafe,
since it takes a mutex, allocates memory with GFP_KERNEL, and invokes
client callbacks.
Handle per-vcpu self notifications directly from the existing per-cpu
work item instead. This keeps the per-vcpu path in task context and
avoids the extra IPI hop entirely.
Fixes: 3a3e2b83e805 ("firmware: arm_ffa: Avoid queuing work when running on the worker queue")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-4-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
Notification pending interrupts are registered as per-CPU IRQs, but the
driver queues all NPI handling through a single shared work_struct.
That allows queue_work_on() calls from different CPUs to collapse onto a
single pending work item even though the work function uses the CPU it
runs on to fetch and handle per-CPU notifications.
Move notif_pcpu_work into the per-CPU ffa_pcpu_irq state and initialize
one work item per CPU. This keeps NPI handling independent per CPU and
avoids losing notifications when multiple CPUs queue work concurrently.
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-3-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
If the RX buffer allocation fails in ffa_init(), the error path jumps to
free_pages even though no buffer has been allocated yet. Route that case
directly to free_drv_info so the cleanup path is only used after at
least one RX/TX buffer allocation has succeeded.
Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The bus match callback assumes that every FF-A driver provides an
id_table and dereferences it unconditionally. Enforce that contract at
registration time so a buggy client driver cannot crash the bus during
match.
Fixes: 92743071464f ("firmware: arm_ffa: Ensure drivers provide a probe function")
Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The relocated kernel image is copied to its new location using memcpy().
On architectures with separate instruction and data caches, the copied
instructions may remain stale in the instruction cache, leading to the
execution of outdated contents.
Call efi_cache_sync_image() after the relocation copy to ensure the
instruction cache is synchronized with the updated memory contents before
control is transferred to the relocated kernel.
Signed-off-by: WANG Rui <r@hev.cc>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Provide a LoongArch implementation of efi_cache_sync_image() to ensure
instruction cache coherency after the kernel image is relocated.
Signed-off-by: WANG Rui <r@hev.cc>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
LoongArch is the only arch that still uses efi_relocate_kernel(), so
before making changes to it that LoongArch needs, turn it into a private
function. Move efi_low_alloc_above() into mem.c while at it, and drop
the relocate.c source file altogether.
Tested-by: WANG Rui <wangrui@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
If kzalloc fails, the function returns -ENOMEM without calling
efivar_unlock(). Since open() returned an error, the calling site
in pstore_get_backend_records() won't call the close() function, so
the lock is never released. Thus drop the lock in case of errors here.
Fixes: 859748255b434 ("efi: pstore: Omit efivars caching EFI varstore access layer")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
coreboot_table_populate() iterates over firmware-provided table entries
with no validation that the entries stay within the mapped memory
region. A corrupt table with a large `entry->size` advances `ptr_entry`
past the mapped region, causing an out-of-bounds read on the next
iteration.
Add a check before dereferencing `ptr_entry` to ensure the entry header
is readable, and a second check after reading `entry->size` to ensure
the full entry stays within the mapped region.
Pass `len` from coreboot_table_probe() into coreboot_table_populate() to
make the mapped region size available for validation.
Signed-off-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Link: https://lore.kernel.org/r/20260426214739.117131-1-titouan.ameline@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
|
|
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Again not a busy cycle for EFI, just some minor tweaks and bug fixes:
- Enable boot graphics resource table (BGRT) on Xen/x86
- Correct a misguided assumption in the memory attributes table
sanity check
- Start tagging efi_mem_reserve()'d regions as MEMBLOCK_RSRV_KERN
- Some other minor fixes and cleanups"
* tag 'efi-next-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
efi: Tag memblock reservations of boot services regions as RSRV_KERN
memblock: Permit existing reserved regions to be marked RSRV_KERN
efi/memattr: Fix thinko in table size sanity check
efi: libstub: fix type of fdt 32 and 64bit variables
efi: Drop unused efi_range_is_wc() function
efi: Enable BGRT loading under Xen
efi: make efi_mem_type() and efi_mem_attributes() work on Xen PV
|
|
Pull workqueue updates from Tejun Heo:
- New default WQ_AFFN_CACHE_SHARD affinity scope subdivides LLCs into
smaller shards to improve scalability on machines with many CPUs per
LLC
- Misc:
- system_dfl_long_wq for long unbound works
- devm_alloc_workqueue() for device-managed allocation
- sysfs exposure for ordered workqueues and the EFI workqueue
- removal of HK_TYPE_WQ from wq_unbound_cpumask
- various small fixes
* tag 'wq-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (21 commits)
workqueue: validate cpumask_first() result in llc_populate_cpu_shard_id()
workqueue: use NR_STD_WORKER_POOLS instead of hardcoded value
workqueue: avoid unguarded 64-bit division
docs: workqueue: document WQ_AFFN_CACHE_SHARD affinity scope
workqueue: add test_workqueue benchmark module
tools/workqueue: add CACHE_SHARD support to wq_dump.py
workqueue: set WQ_AFFN_CACHE_SHARD as the default affinity scope
workqueue: add WQ_AFFN_CACHE_SHARD affinity scope
workqueue: fix typo in WQ_AFFN_SMT comment
workqueue: Remove HK_TYPE_WQ from affecting wq_unbound_cpumask
workqueue: unlink pwqs from wq->pwqs list in alloc_and_link_pwqs() error path
workqueue: Remove NULL wq WARN in __queue_delayed_work()
workqueue: fix parse_affn_scope() prefix matching bug
workqueue: devres: Add device-managed allocate workqueue
workqueue: Add system_dfl_long_wq for long unbound works
tools/workqueue/wq_dump.py: add NODE prefix to all node columns
tools/workqueue/wq_dump.py: fix column alignment in node_nr/max_active section
tools/workqueue/wq_dump.py: remove backslash separator from node_nr/max_active header
efi: Allow to expose the workqueue via sysfs
workqueue: Allow to expose ordered workqueues via sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Nothing too thrilling here, but we see lots of driver updates and bug
fixes, including quirk additions and refactoring works, while there
have been little changes in the core functionality. Here are some
highlights:
Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon, Studio
1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow, PreSonus
AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver"
* tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (359 commits)
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
ALSA: usb-audio: Fix missing error handling for get_min_max*()
ALSA: hda/realtek - fixed speaker no sound update
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP
ALSA: hda/realtek: Add quirk for Legion S7 15IMH
ALSA: hda/realtek: Add quirk for HP Spectre x360 14-ea
ALSA: caiaq: take a reference on the USB device in create_card()
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
ALSA: sscape: Add suspend and resume support
ALSA: sscape: Cache per-card resources for board reinitialization
ALSA: usb-audio: Do not expose sticky mixers
ALSA: usb-audio: Move volume control resolution check into a function
ALSA: usb-audio: Add error checks against get_min_max*()
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
ALSA: usb-audio: Evaluate packsize caps at the right place
ALSA: sc6000: Restore board setup across suspend
ALSA: sc6000: Keep the programmed board state in card-private data
ALSA: 6fire: fix use-after-free on disconnect
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Remove M486/M486SX/ELAN support, first minimal step (Ingo Molnar)
- Print AGESA string from DMI additional information entry (Yazen
Ghannam, Mario Limonciello)
- Improve and fix the DMI code (Mario Limonciello):
- Correct an indexing error in <linux/dmi.h>
- Adjust dmi_decode() to use enums <linux/dmi.h>
- Add pr_fmt() for dmi_scan.c to fix & standardize the log prefixes
* tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Print AGESA string from DMI additional information entry
firmware: dmi: Add pr_fmt() for dmi_scan.c
firmware: dmi: Adjust dmi_decode() to use enums
firmware: dmi: Correct an indexing error in dmi.h
x86/cpu: Remove M486/M486SX/ELAN support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A fix for v7.1
Use the page aligned backing allocation size when computing the RXTX_MAP
page count. This fixes FF-A RX/TX buffer registration on kernels built
with 16K/64K PAGE_SIZE, where alloc_pages_exact() backs the buffer with a
larger aligned span than the discovered minimum buffer size.
* tag 'ffa-fix-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
One more Qualcomm driver update for v7.1
Flag Lenovo IdeaCentre Mini X to have functional QSEECOM/uefisecapp.
* tag 'qcom-drivers-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.
The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().
On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.
This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site.
Fixes: f24c4d478013 ("efi/capsule-loader: Reinstate virtual capsule mapping")
Assisted-by: Claude:claude-sonnet-4-5
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Fix an incorrect preprocessor conditional that may result in duplicate
instances of sysfb_primary_display on x86"
* tag 'efi-fixes-for-v7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
firmware: efi: Never declare sysfb_primary_display on x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Prevent hang at power down for imx8mp-blk-ctrl
- thead: Fix buffer overflow for TH1520 AON driver
- Change Ulf Hansson's email
* tag 'pmdomain-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
MAINTAINERS, mailmap: Change Ulf Hansson's email
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
firmware: thead: Fix buffer overflow and use standard endian macros
|
|
By definition, EFI memory regions of type boot services code or data
have no special significance to the firmware at runtime, only to the OS.
In some cases, the firmware will allocate tables and other assets that
are passed in memory in regions of this type, and leave it up to the OS
to decide whether or not to treat the allocation as special, or simply
consume the contents at boot and recycle the RAM for ordinary use. The
reason for this approach is that it avoids needless memory reservations
for assets that the OS knows nothing about, and therefore doesn't know
how to free either.
This means that any memblock reservations covering such regions can be
marked as MEMBLOCK_RSRV_KERN - this is a better match semantically, and
is useful on x86 to distinguish true reservations from temporary
reservations that are only needed to work around firmware bugs.
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
While it is true that each PE/COFF runtime driver in memory can
generally be split into 3 different regions (the header, the code/rodata
region and the data/bss region), each with different permissions, it
does not mean that 3x the size of the memory map is a suitable upper
bound. This is due to the fact that all runtime drivers could be
coalesced into a single EFI runtime code region by the firmware, and if
the firmware does a good job of keeping the fragmentation down, it is
conceivable that the memory attributes table has more entries than the
EFI memory map itself.
So instead, base the sanity check on whether the descriptor size matches
the EFI memory map's descriptor size closely enough (which is not
mandated by the spec but extremely unlikely to differ in practice), and
whether the size of the whole table does not exceed 64k entries.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The x86 architecture comes with its own instance of the global
state variable sysfb_primary_display. Never declare it in the EFI
subsystem. Fix the test for CONFIG_FIRMWARE_EDID accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e65ca1646311 ("efi: export sysfb_primary_display for EDID")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
