| Age | Commit message (Collapse) | Author |
|
Make life a bit more straightforward by removing the bitwise
not from {i9xx,i965}_error_mask() and instead do it when feeding
the value to gen2_error_init(). Make life a bit easier I think.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-8-ville.syrjala@linux.intel.com
|
|
Introduce i915_error_regs as the EIR/EMR counterpart
to the IIR/IMR/IER i915_irq_regs, and update the irq
reset/postingstall to utilize them accordingly.
v2: Include xe compat versions
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-7-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Hook up display GTT fault interrupts for ILK/SNB.
Bspec: 8559
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-6-ville.syrjala@linux.intel.com
|
|
Dump out the display fault information from the IVB/HSW
error interrupt handler.
Bspec: 8203
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-5-ville.syrjala@linux.intel.com
|
|
Decode the display faults a bit more extensively so that one
doesn't have to translate the bitmask to planes/etc. manually.
Also for plane faults we can read out a bit of state from the
relevant plane(s) and dump that out.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-4-ville.syrjala@linux.intel.com
|
|
I want to capture a little bit more information about the state
of the plane upon faults. To that end introduce a small plane error
state struct and provide per-plane vfuncs to read it out.
For now we just stick the CTL, SURF, and SURFLIVE (if available)
registers contents in there.
v2: Use struct intel_display instead of dev_priv
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-3-ville.syrjala@linux.intel.com
|
|
The if ladder in gen8_de_pipe_fault_mask() was missing one
else, add it. Doesn't actually matter since each if branch
just returns directly. But the code is less confusing when
you always do things the same way.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-2-ville.syrjala@linux.intel.com
|
|
Generate CPER record when bad page threshold exceed and
commit to CPER ring.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit the CPER entry to the ring buffer.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid the confliction between read and write of ring buffer.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since pmfw supports for smuv13_0_6 is limited to 8 jpeg rings per instance,
which is the max for jpeg_v_4_0_3. Limit it to same to avoid out
of bound access.
Fixes: 568199a5c7a9 ("drm/amd/pm: Limit to 8 jpeg rings per instance")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Old CPER data will be overwritten if ring buffer is full, and read
pointer always points to CPER header.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We read CPER data from read pointer to write pointer without changing
the pointers.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
And initialize it, this is a pure software ring to store RAS CPER data.
v2: change ring size to 0x100000
v2: update the initialization of count_dw of cper ring, it's dword
variable
v3: skip VM inv eng for cper
v3: init/fini when aca enabled
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get system local time and encode it to timestamp for CPER.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocate the buffer at sw init time so we don't alloc
and free it for every suspend/resume or reset cycle.
Reviewed-by: Shaoyun.liu <shaouyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allocate the buffer at sw init time so we don't alloc
and free it for every suspend/resume or reset cycle.
Reviewed-by: Shaoyun.liu <shaouyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") blew
away the compiler warning fix from commit 2fde4fdddc1f
("drm/amd/display: Avoid -Wenum-float-conversion in
add_margin_and_round_to_dfs_grainularity()"), causing the warning to
reappear.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Apply the fix again to resolve the warning.
Fixes: 1b30456150e5 ("drm/amd/display: DML21 Reintegration")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Encode the error information in CPER format and commit
to the cper ring
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <keivnyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To workaround queue full h/w issue on Gfx7/8, when application create
AQL queue, the ring buffer bo allocate size is queue_size/2 and
map queue_size ring buffer to GPU in 2 pieces using 2 attachments, each
attachment map size is queue_size/2, with same ring_bo backing memory.
For Gfx7/8, user queue buffer validation should use queue_size/2 to
verify ring_bo allocation and mapping size.
Fixes: 68e599db7a54 ("drm/amdkfd: Validate user queue buffers")
Suggested-by: Tomáš Trnka <trnka@scm.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce new functions that are used to generate
cper ue or ce records.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Yang Wang <keivnyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ACA error types managed by driver a direct 1:1
correspondence with those managed by firmware.
To address this, for each ACA bank, include
both the ACA error type and the ACA SMU type.
This addition is useful for creating CPER records.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <keivnyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GECC only when the default memory ECC mode or
the module parameter amdgpu_ras_enable is activated.
v2: Add kernel message to remind users explicitly set
amdgpu_ras_enable=1 before driver loading to enable GECC
and set amdgpu_ras_enable=0 to disable GECC when GECC is
currently enabled if needed.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce utility functions designed to assist
in populating CPER records.
v2: call cper_init/fini in device_ip_init/fini.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMD is using Common Platform Error Record (CPER) format
to report all gpu hardware errors.
v2: add program attribute
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change the function name from vcn_v2_5_enable_clock_gating_inst
to vcn_v2_5_enable_clock_gating to ensure consistency in naming.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:781: warning: expecting prototype for vcn_v2_5_enable_clock_gating_inst(). Prototype was for vcn_v2_5_enable_clock_gating() instead
Cc: Leo Liu <leo.liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VCN 4.0.3 doesn't support powergating so there is
no need to call these.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VCN 5.0.1 doesn't support powergating so there is
no need to call these.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VCN and UVD helpers were split in
commit ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
However, this happened in parallel to the vcn 5.0.1
development so it was missed there.
Fixes: 346492f30ce3 ("drm/amdgpu: Add VCN_5_0_1 support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sonny Jiang <sonjiang@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
|
|
Make the constant parts of the name part of the string
we pass to amdgpu_ucode_request(). Only the version
number varies from IP to IP.
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lang Yu <Lang.Yu@amd.com>
|
|
Return an error if the IP version doesn't match otherwise
we end up passing a NULL string to amdgpu_ucode_request.
We should never hit this in practice today since we only
enable the umsch code on the supported IP versions, but
add a check to be safe.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502130406.iWQ0eBug-lkp@intel.com/
Fixes: 020620424b27 ("drm/amd: Use a constant format string for amdgpu_ucode_request")
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lang Yu <Lang.Yu@amd.com>
|
|
As far as the number of XCCs, the number of compute partitions, and the
number of memory partitions qualify, CPX is valid.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needed to be properly picked up for the initrd, etc.
Fixes: 3488c79beafa ("drm/amdgpu: add initial support for UMSCH")
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lang Yu <Lang.Yu@amd.com>
|
|
This should not be called on chips without MES so check if
MES is enabled and if the cleaner shader is supported.
Fixes: 8521e3c5f058 ("drm/amd/amdgpu: limit single process inside MES")
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shaoyun Liu <shaoyun.liu@amd.com>
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
|
|
Add ring reset function callback for JPEG2_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset function callback for JPEG2_5_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add helper functions to handle per-instance initialization
and deinitialization in JPEG2_5_0.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset function callback for JPEG3_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ring reset function callback for JPEG4_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add helper functions to handle per-instance and per-core
initialization and deinitialization in JPEG4_0_3.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
remove unnecessary line breaks.
[ 51.280860] amdgpu 0000:24:00.0: amdgpu: smu send message: GetEnabledSmuFeaturesHigh(13) param: 0x00000000, resp: 0x00000001, readval: 0x00003763
Fixes: 0cd2bc06de72 ("drm/amd/pm: enable amdgpu smu send message log")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
current test is more intrusive for user queue test
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Suggested-by: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable ACA by default for psp v13_0_12.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Any active plane needs to have its crtc included in the atomic
state. For planes enabled via uapi that is all handler in the core.
But when we use a plane for joiner the uapi code things the plane
is disabled and therefore doesn't have a crtc. So we need to pull
those in by hand. We do it first thing in
intel_joiner_add_affected_crtcs() so that any newly added crtc will
subsequently pull in all of its joined crtcs as well.
The symptoms from failing to do this are:
- duct tape in the form of commit 1d5b09f8daf8 ("drm/i915: Fix NULL
ptr deref by checking new_crtc_state")
- the plane's hw state will get overwritten by the disabled
uapi state if it can't find the uapi counterpart plane in
the atomic state from where it should copy the correct state
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-2-ville.syrjala@linux.intel.com
(cherry picked from commit 91077d1deb5374eb8be00fb391710f00e751dc4b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix the port width programming in the DDI_BUF_CTL register on MTLP+,
where this had an off-by-one error.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-3-imre.deak@intel.com
(cherry picked from commit b2ecdabe46d23db275f94cd7c46ca414a144818b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The format of the port width field in the DDI_BUF_CTL and the
TRANS_DDI_FUNC_CTL registers are different starting with MTL, where the
x3 lane mode for HDMI FRL has a different encoding in the two registers.
To account for this use the TRANS_DDI_FUNC_CTL's own port width macro.
Cc: <stable@vger.kernel.org> # v6.5+
Fixes: b66a8abaa48a ("drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-2-imre.deak@intel.com
(cherry picked from commit 76120b3a304aec28fef4910204b81a12db8974da)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When devm_add_action_or_reset() fails, it already calls the function
passed as parameter and that function is already free'ing the irqs.
Drop the goto and just return.
The caller, xe_device_probe(), should also do the same thing instead of
wrongly doing `goto err` and calling the unrelated xe_display_fini()
function.
Fixes: 14d25d8d684d ("drm/xe: change old msi irq api to a new one")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 121b214cdf10d4129b64f2b1f31807154c74ae55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
Fixes: 2f2cc53b5fe7 ("drm/i915/guc: Close deregister-context race against CT-loss")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13399
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/pusppq5ybyszau2oocboj3mtj5x574gwij323jlclm5zxvimmu@mnfg6odxbpsv
(cherry picked from commit c088387ddd6482b40f21ccf23db1125e8fa4af7e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
kmap_local_page(), unlike kmap(), performs a contextualized
mapping of pages. This means the pages are mapped locally to the
thread that created them, making them invisible outside the
thread and safer to use.
Replace kmap() and kunmap() with kmap_local_page() and
kunmap_local() counterparts for improved safety.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214003437.1311476-1-andi.shyti@linux.intel.com
|
|
Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and
drm_panel_bridge_add_typed() and derivatives are deprecated for this.
drm_panel_init() won't prevent initializing a panel with a
DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree
users doing it, so take this as an opportinuty to document a valid
connector type must be passed.
Returning an error if this rule is violated is not possible because
drm_panel_init() is a void function. Add at least a warning to make any
violations noticeable, especially to non-upstream drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-5-88ca5827d7af@bootlin.com
|