| Age | Commit message (Collapse) | Author |
|---|
|
We've had an unknown Turing issue for a while with page faults since
large pages and compression.
I've got a patch series that syncs all our L2 handling with ogkm and it
made this fault happen more.
After writing a bunch of debugging patches, I spotted an invalid LPT
entry where there should have been a valid one.
A 64K MAP succeeds on a range, but a subsequent SPT put drops SPT refs
across multiple ranges,
We shouldn't assume all ranges where SPTEs go away will have the same
sparse/invalid/valid state, just iterate over each instead and do the
right thing.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: d19512f5abb1 ("nouveau/vmm: start tracking if the LPT PTE is valid. (v6)")
Link: https://patch.msgid.link/20260615044737.3419585-1-airlied@gmail.com
[ Properly format commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In the non-uvmm path, there could be a race between the info lookup
finding the vma, and the gem close path closing the vma leading
to a use-after-free.
Spotted with the help of Opus 4.6.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: e758a3111914 ("drm/nouveau: fixup gem_info ioctl to return client-specific bo virtual")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612020658.3176270-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
nouveau_uvmm_vm_bind_ucopy() and nouveau_exec_ucopy() place their error
cleanup labels in allocation order rather than reverse allocation order.
On a u_memcpya() failure for in_sync.s, the goto to err_free_ops (or
err_free_pushs) frees the first allocation and then falls through to
err_free_ins, which calls u_free() on args->in_sync.s.
Since args->in_sync.s still holds the ERR_PTR returned by the failed
u_memcpya(), and ERR_PTR values are not caught by ZERO_OR_NULL_PTR(),
kvfree() proceeds to dereference it, which can result in a kernel oops.
A failure for out_sync.s instead jumps to err_free_ins and skips freeing
the first allocation, leading to a memory leak.
Fix by swapping the cleanup label order so resources are freed in the
correct reverse allocation sequence.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881484D91A6F80271415F71AF1A2@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In nvkm_acr_oneinit(), nvkm_kmap(acr->wpr) is invoked unconditionally
at line 309 to obtain a mapping reference. Additionally, when both
acr->wpr_fw and acr->wpr_comp are present, a second nvkm_kmap() is
called inside the conditional block. Both mappings are expected to be
released by nvkm_done(acr->wpr) at line 320 before the function returns
successfully.
However, when a mismatch is detected during the loop within the
conditional block, the function returns -EINVAL at line 318 without
calling nvkm_done(). This results in a leak of the kmap reference(s)
acquired earlier.
Fix the issue by invoking nvkm_done(acr->wpr) prior to the early return
to ensure proper release of the mapping references.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260606155606.77593-1-vulab@iscas.ac.cn
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In all functions where xe_gt pointer is relevant, we should use
GT-oriented diagnostic messages using macros from xe_gt_printk.h
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260608182829.913-1-michal.wajdeczko@intel.com
|
|
The GSP static information is useful during regular driver runtime;
however it is currently obtained from `Gsp::boot`, with no elegant way
to pass it back to the caller.
Solve this by moving the code acquiring it to a dedicated method of
`Gsp` that can be called as soon as the `Gsp` is booted. This allows us
to obtain and display the static information from the `Gpu` constructor,
and to store the static information for later use.
Its location at the end of `Gsp::boot` was a bit out-of-place anyway:
technically, the GSP is considered booted after we have received the
`GspInitDone` message, so anything that happens afterwards is not part
of the boot sequence anymore.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260617-boot-vram-v3-2-20b9ec5fe9f2@nvidia.com
[acourbot: add documentation to `get_static_info` method.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
`Gpu` currently owns the state needed to unload the GSP directly. This
means that `unload_bundle` has to be the last initialized field: once GSP
boot succeeds, any later initialization failure would leave `Gpu`
partially initialized, and its `PinnedDrop` implementation would not run.
This prevents adding fallible `Gpu` fields that need to query the GSP
after it has booted.
Move the GSP state and unload bundle into a dedicated pinned
`GspResources` object. Once that subobject has been initialized, its
`PinnedDrop` implementation will run even if initialization of a later
`Gpu` field fails, ensuring that the GSP unload sequence is executed.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260617-boot-vram-v3-1-20b9ec5fe9f2@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
`FspFirmware` is constructed and immediately passed into `Fsp`. It makes
sense for `Fsp` to ask to load its firmware, so move it there.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260615-blackwell-fixes-v1-6-f2853e49ff7d@nvidia.com
[acourbot: fix minor merge conflict.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Small cleanup to move these constants which are only used once closer to
their use location.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260615-blackwell-fixes-v1-4-f2853e49ff7d@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
Bspec has been updated for xe2_lpd+ platforms on how to handle
the bw buddy programming in case no matching memory configuration
is found w.r.t the current page mask table. The recommendation
is to keep the default settings for the related registers as it
is without explicitly disabling the bw buddy.
v2: removed extra explanation
v3: fixed typo in commit message
Bspec: 68871
Suggested-by: Ville Syrjala <ville.syrjala@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260616184131.295013-1-vinod.govindapillai@intel.com
|
|
Hardware errors are reported through System Controller on the platforms
that support it, and never routed as direct IRQ to SGUnit. Defeature
their handling to prevent unexpected side effects.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260618153209.110899-2-raag.jadav@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
|
|
When the VRR timing generator is always used, the hardware behaves
as VRR-active regardless of crtc_state->vrr.enable.
The DSB paths that depend on the VRR safe window therefore need to follow
the VRR code paths in that case too:
- dsb_chicken(): program the SAFE_WINDOW chicken bits,
- intel_dsb_vblank_evade(): use vmin/vmax vblank starts for the
wait window,
- intel_dsb_wait_for_delayed_vblank(): wait inside the vmin safe window
before the scanline-based delayed vblank wait.
Introduce helper pre_commit_use_safe_window() and use it in the three sites
v2: Instead of modifying pre_commit_is_vrr_active() use a new helper and
use it only in the required places. (Ville).
v3: -Keep using pre_commit_is_vrr_active() for DCB path. (Ville)
-Add a separate check for fixed RR with VRR TG and use
fixed mode vblank start there. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260617051417.2223526-1-ankit.k.nautiyal@intel.com
|
|
In intel_dsb_wait_for_delayed_vblank() the VRR path issues a
WAIT_DSL_OUT(safe_window_start, vmin_safe_window_end) followed by a
WAIT_USEC for SCL+1 scanlines to land on the delayed vblank.
Experimentally, DSB appears to observe a slightly stale PIPEDSL value.
When the actual scanline has just reached safe_window_start, the DSB
may still see a value at or before that boundary when WAIT_DSL_OUT is
evaluated, causing the wait to complete immediately.
As a result, the subsequent WAIT_USEC executes too early, and the
flip-done interrupt fires roughly one frame ahead of the delayed vblank.
Shift the scanline start back by one to ensure the wait window is
entered reliably.
v2: Replace explicit one-scanline delay with scanline boundary
adjustment (safe_window_start - 1). (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260608123711.1121908-2-ankit.k.nautiyal@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
Turns out both CDCLK_CTL pipe select 0b110 (what Bspec lists for
pipe C on ICL) and 0b100 (what BSpec lists for pipe C on TGL+)
actually select pipe C on ICL. So we can get rid of the weird
ICL special case and just use the simpler TGL+ definition of
the pipe select bits.
This was reverse engineered with a hacked up intel_display_poller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-7-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Currently bxt_sanitize_cdclk() assumes that
bxt_cdclk_cd2x_pipe(INVALID_PIPE) gives us the full mask for
for the relevant bitfield. While that is true, it does make the
code a bit confusing to read. Introduce bxt_cdclk_cd2x_pipe_mask()
to make the situation a bit less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-6-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Document which CDCLK_CTL bits are relevant for which platforms.
Saves me from having to look this up in the spec every time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-5-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Use the modern REG_BIT/REG_GENMASK stuff to define the
CDCLK_CTL bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-4-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
Make debugging a bit easier by printing out the specific reason
for the CDCLK sanitization. Currently one is forced to guess what
is actually happening.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-3-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
The GOP (and even Bspec on some platforms) is a bit inconsistent
on what the CDCLK_FREQ_DECIMAL divider should be. Currently any
mismatch there causes a full CDCLK PLL disable+re-enable, which
we really don't want to do if any displays are currently active.
Let's instead just reprogram CDCLK_FREQ_DECIMAL when that is the
only thing amiss. For any other (more serious) mismatch we still
punt to the full PLL reprogramming.
We also need to tweak the bxt_cdclk_cd2x_pipe() stuff a bit to
consistently select pipe==NONE since we have no idea which pipes
are enabled at this point. Since we're not actually changing the
CDCLK frequency here we don't need to sync the update to any
pipe.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16209
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260612173653.7830-2-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
|
|
The backlight, when managed by the panel controller, could be powered by
an external regulator, and shutting down the regulator could power off
the backlight.
Add support for such a regulator. It's powered off when the backlight is
0 (either by setting brightness to 0 or setting bl_power), and powered
on when the backlight should be operating.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260608162622.403713-3-zhengxingda@iscas.ac.cn
|
|
As backlight powering on/off support will be added, more fields of the
panel context will be accessed in the backlight update function.
Pass the whole panel struct instead of the DSI device when creating the
backlight device.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260608162622.403713-2-zhengxingda@iscas.ac.cn
|
|
Add support for Ilitek ILI9488 DSI controller which is used in
FocusLCDs E35GH-I-MW800-CB 320x480 MIPI DSI panel. The mode timing
was adjusted after STM32MP157 testing. The previous 14.256 MHz mode
worked on AM62P, but was awkward for STM32 DSI/LTDC clock synthesis.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260617143245.372182-3-igor@reznichenko.net
|
|
This adds support for the ICNA3512 and ICNA3520 DDICs used in both the
AYN Odin 2 Portal and Ayaneo Pocket DS top panel respectively and for
for both the AYN Odin 3 and the AYN Thor top panel respectively.
These all have unique compatibles because the panels themselves are
likely unique hardware with only the ddic's and thus api and driver
handling shared.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260607-icna35xx-v4-2-64de514add34@gmail.com
|
|
The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
on the TD4310 controller IC. It measures approximately 5.5 inches
diagonally and is 1080x1920 in resolution.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260610144407.438846-5-macroalpha82@gmail.com
|
|
Don't populate the read-only array rates the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260608122427.48375-1-colin.i.king@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With optimized guardband, we need to take into account LOBF requirements
via intel_alpm_lobf_min_guardband().
Currently, we set has_lobf based not only on whether it is supported, but
also on whether PSR/fixed RR are ON. Since these features can switch ON and
OFF seamlessly, this may cause LOBF to change, resulting in a change in
guardband requirements, and eventually to a full modeset.
To avoid this, always account for LOBF if it is supported, in the
encoder->compute_config() stage. For this, allow has_lobf to be set
irrespective of PSR/Fixed RR. Later, in the encoder->compute_config_late()
stage, use the PSR/Fixed RR checks to set has_lobf to the final value.
Move the PSR/Fixed RR checks from intel_alpm_lobf_compute_config() to
intel_alpm_lobf_compute_config_late(), where we already account for other
LOBF constraints.
v2: Reset has_lobf if psr or VRR is ON in
intel_alpm_lobf_compute_config_late(). (Animesh)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260616080627.2136659-1-ankit.k.nautiyal@intel.com
|
|
intel_cx0_phy_check_hdmi_link_rate does not exist but is still
declared. Remove it.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260617041807.162927-1-suraj.kandpal@intel.com
|
|
There are monitors being sensitive to MSA and end up
blanking out when we override Vtotal, DP transcoder
uses TRANS_VTOTAL to derive MSA VTotal. Avoid overriding
crtc_vtotal to 1 on platform which supports VRR Timing
generator and always program VTOTAL from mode timing in
transcoder timing paths.
--v2:
- Remove write to crtc_state->hw.adjusted_mode.crtc_vtotal
during intel_vrr_get_config. (Ankit)
- Fix merge conflicts.
Bspec: 70001
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260617045850.862100-1-mitulkumar.ajitkumar.golani@intel.com
|
|
Several comments transpose the letters in "assigned" and "unsigned",
spelling them with "sing" instead of "sign". Correct all of them.
Of these, the misspelling of "assigned" is not yet flagged by checkpatch,
so also add it to scripts/spelling.txt.
The remaining matches of `grep -ri singed` are RISINGEDGE register and
enum names, not typos.
Link: https://lore.kernel.org/20260612181633.734458-1-iamsharduld@gmail.com
Signed-off-by: Shardul Deshpande <iamsharduld@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow the kernel to dispatch the soft IH work on other CPUs.
Otherwise it can happen that the soft IH ring fills up
before it actually starts processing anything, which
can easily happen with retry page faults, in which case
the CP repeatedly spams the CPU with a lot of interrupts.
This significantly improves retry page fault handling on
GPUs that don't have the filter CAM and must rely on
software based filtering.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3cdff3c8b93c2834977224d9c2b201fc334dd184)
|
|
Report the correct version of IH v6.1 (previously it showed v6.0).
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 940d33ebbcdebaf095fade86e9c981ad8789aee2)
|
|
SVM ranges use inclusive page indices: prange->last is the last page in
the range. The split-remap logic introduced by commit 448ee45353ef
("drm/amdkfd: Use huge page size to check split svm range alignment")
uses ALIGN_DOWN(prange->last, 512) to determine whether the original
range can contain a 2MB huge-page mapping.
That aligns the last page itself down. Thus a range ending one page
before the next 2MB boundary is classified as if the final 2MB block did
not exist. When such a range is split inside that final block, the
split head or tail can be left off the remap list even though it was
derived from an original range that may have PMD mappings.
Use prange->last + 1 as the exclusive upper bound when computing the
original range's last 2MB-aligned boundary. Then use the actual split
boundary for the head and tail alignment checks: tail->start for a tail
split, and new_start for a head split. new_start is equivalent to
head->last + 1 and directly names the exclusive end of the split head.
Using head->last for the head-side check can both remap a head that ends
exactly one page before a 2MB boundary and miss a head whose split
boundary is one page after such a boundary. Philip Yang pointed out in
the review of the original change that this condition should use
head->last + 1 or new_start.
Xiaogang Chen identified the inclusive-last cause and posted the
candidate fix in the regression thread. With the culprit change active
and the local revert not applied, the unchanged C/HSA reproducer
completes 10/10 runs with this change on an RX 7600 XT.
Fixes: 448ee45353ef ("drm/amdkfd: Use huge page size to check split svm range alignment")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4914
Link: https://lore.kernel.org/stable/IA1PR12MB85172F7FE9157C092EDA46A0E3112@IA1PR12MB8517.namprd12.prod.outlook.com/
Link: https://lore.kernel.org/all/32ce2b72-aa16-4202-9f99-92e3cd4408bc@amd.com/
Suggested-by: Xiaogang Chen <xiaogang.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Gerhard Schwanzer <geschw@pm.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a60ea15807126b148a328051636977a33ad0e9bb)
Cc: stable@vger.kernel.org
|
|
For Renior APU with gfx9, in some test scenarios with disabling
ring_reset, like accessing an unmapped invalid address, it can
trigger a gpu job timeout event, then driver uses Mode2 reset
to reset GPU, but after Mode2 compute Ring test and IB test fail
randomly. It because the HQDs of MECs are always active before or
after Mode2, that causes MECs use stale HQDs when MECs are unhalted
before driver restore MQDs, and causes CPC and CPF are still stuck
after Mode2, then causes compute Ring and IB tests fail.
So, add sequences to deactivate HQDs of MECs in suspend IP function
of the resetting process.
v2: Move all sequences into a new function gfx_v9_0_cp_mode2_clear_state (Ray Huang)
To check reset Mode2 method in the if condition (Ray Huang)
v3: Move all sequences before Mode2 instead of after Mode2 (Timur Kristóf)
v4: Call amdgpu_gfx_rlc_enter/exit_safe_mode int the begin and end of
gfx_v9_0_deactivate_kcq_hqd (Alex Deucher)
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c3988a7ad4799514447294f04f063b422e0551df)
Cc: stable@vger.kernel.org
|
|
(v2)
UVD 4.x and older can only access MSG, FEEDBACK buffers from a
specific 256M VRAM segment that the VCPU BO is also located in.
We already modify all placements of the given BO to ensure
the BO is placed within this segment.
Previously, it always assumed that the VCPU segment is
the first 256M of VRAM, even though under some conditions
the VCPU BO could be allocated outside this segment,
which made UVD non-functional as the BOs were
not inside the same segment as the UVD VCPU BO.
Solve that by using the segment where the VCPU BO actually is.
This fixes an issue with UVD failing to initialize on SI/CIK
when resizable BAR is enabled and the VCPU BO is allocated
in a different segment.
v2:
- For other BOs, keep using the same UVD segment as before.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3851
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbfd4d3fc2061a1ec8e9d36e65973ac3e813358a)
Cc: stable@vger.kernel.org
|
|
These UVD versions don't fully support GPUVM and are only
validated to work when their VCPU BO is placed in VRAM.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01b8dfc0660db5d6cdd62c22dc20f774a26ce853)
Cc: stable@vger.kernel.org
|
|
The UVD code relies on GTT to GTT moves in order to ensure
that its BOs don't cross 256M segments.
Fixes: bfe5e585b44f ("drm/ttm: move last binding into the drivers.")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 21fd45e5e2628d00b478590bcc3d14d3de5d45b6)
Cc: stable@vger.kernel.org
|
|
When testing intersection and compatibility, respect
the actual placement requirements. This is a pre-requisite
for ensuring that UVD CS BOs do not cross 256M segments.
Fixes: ded910f368a5 ("drm/amdgpu: Implement intersect/compatible functions")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc06579ca29dee9c245a41b12e39c7bb6938af5d)
Cc: stable@vger.kernel.org
|
|
There are several problems in the context pstate handling code.
The most serious ones are potential use-after-free and NULL pointer
dereferences at context initialization time. Both are due
amdgpu_ctx_init() not holding the adev->pm.stable_pstate_ctx_lock, which
is otherwise used from both sysfs and the context code itself for
modifying and clearing the stored context pointer.
Second issue is that context fini can trample over the pstate
configuration set via sysfs. This is due the restore state
(ctx->stable_pstate) being saved at context init time, and not if, or when
the context actually changes the pstate. As the context exits it will
therefore incorrectly restore to what was set before the sysfs override
was requested.
The simplest fix is to drastically simplify how the state is tracked, by
clearly defining the points at which pstate ownership is taken and
released, and to handle all transitions under the correct lock.
Instead of at context init time, the previous state is saved only at the
point the context overrides the current state, and is restored on context
exit only if the context is still the owner of the current override state.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 79610d304133 ("drm/amdgpu: fix pstate setting issue")
Cc: Chengming Gui <Jack.Gui@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1b5e413713c0a93bc1818394d0ce49aaad21bd27)
Cc: <stable@vger.kernel.org> # v6.1+
|
|
Several kfd ioctls need transfer array data from/to user space. Kfd driver
uses kmalloc_array with user provided size. That can oversize alloc or 32-bit
wrap with hostile value. Replace it by memdup_array_user that does overflow
checking and allocates through dedicated slab caches, also physical continuous
as kmalloc.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4eca4742eb215951f9739ffe0122d179d545a7a4)
|
|
If inx from find_first_zero_bit is beyond range not need set doorbell_bitmap.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2664ce9143d174651a793d96a6a2326050c4f45a)
|
|
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a)
|
|
When dumping IB contents from a hung job, amdgpu_devcoredump_format()
acquired the VM root PD's reservation via amdgpu_vm_lock_by_pasid() and
then, for each IB, called amdgpu_bo_reserve() on the BO backing the IB.
Both reservations are reservation_ww_class_mutex objects and neither
used a ww_acquire_ctx, which trips lockdep:
WARNING: possible recursive locking detected
--------------------------------------------
kworker/u128:0 is trying to acquire lock:
ffff88838b16e1f0 (reservation_ww_class_mutex){+.+.}-{4:4},
at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu]
but task is already holding lock:
ffff8882f82681f0 (reservation_ww_class_mutex){+.+.}-{4:4},
at: amdgpu_devcoredump_format+0x1594/0x23f0 [amdgpu]
Possible unsafe locking scenario:
CPU0
----
lock(reservation_ww_class_mutex);
lock(reservation_ww_class_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
Workqueue: events_unbound amdgpu_devcoredump_deferred_work [amdgpu]
Call Trace:
__ww_mutex_lock.constprop.0
ww_mutex_lock
amdgpu_bo_reserve
amdgpu_devcoredump_format+0x1594 [amdgpu]
amdgpu_devcoredump_deferred_work+0xea [amdgpu]
The two reservations are on different BOs in the captured trace, so the
splat is a lockdep-correctness warning, not an observed deadlock. It
becomes a real self-deadlock whenever the IB BO shares its dma_resv with
the root PD (the always-valid case, see amdgpu_vm_is_bo_always_valid()):
amdgpu_bo_reserve(abo) re-acquires the same ww_mutex without a ticket
and blocks forever. With amdgpu.gpu_recovery=0 the timeout handler
refires every ~2 s and each invocation produces this splat, drowning the
kernel ring buffer.
Now that amdgpu_vm_lock_by_pasid() takes a drm_exec context, move the IB
dumping into a separate helper that locks the root PD and every IB BO
together in a single drm_exec ticket. DRM_EXEC_IGNORE_DUPLICATES handles
IB BOs that share a dma_resv (e.g. always-valid BOs, or two IBs backed
by the same BO). Every lock is now a top-level acquire under one
ww_acquire_ctx, so the recursive ww_mutex condition is gone, and the
per-IB amdgpu_bo_reserve()/amdgpu_bo_unref() dance -- including a BO
refcount leak on the amdgpu_bo_reserve() failure path -- is removed.
Fixes: 7b15fc2d1f1a ("drm/amdgpu: dump job ibs in the devcoredump")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d6bf4242731219ee08ce54c365631e395486651e)
|
|
amdgpu_vm_lock_by_pasid() looks up a VM by PASID and reserves its root
PD with a bare amdgpu_bo_reserve(), returning the still-reserved root to
the caller. A caller that then needs to reserve further BOs (for example
the devcoredump IB dump) ends up nesting reservation_ww_class_mutex
acquires without a ww_acquire_ctx, which lockdep flags as recursive
locking.
Convert the helper to take a drm_exec context and lock the root PD with
drm_exec_lock_obj(). Callers now run it inside a
drm_exec_until_all_locked() loop and can lock additional BOs in the same
ww ticket, so there is no nested ww_mutex acquire.
The drm_exec context holds its own reference on the locked root BO, so
the helper no longer hands a root reference back to the caller: the
root output parameter is dropped, and the transient reference taken
across the PASID lookup is released before returning.
The only existing caller, amdgpu_vm_handle_fault(), is updated
accordingly. Its is_compute_context path, which previously dropped the
root reservation around svm_range_restore_pages() and re-took it, now
finalises the drm_exec context and re-initialises a fresh one; behaviour
is otherwise unchanged.
No functional change intended for the page-fault path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 14682de8ad377bf13ea66e47c26dcfea0b19a21d)
|
|
UTS_RELEASE evaluates to a static string and changes quite easily (e.g.
uncommitted changes in the source tree or new commits). So when checking
if a patch introduces changes to the resulting binary each usage of
UTS_RELEASE is source of annoyance.
Instead of using UTS_RELEASE directly use init_utsname()->release which
evaluates to the same string but with that a change of UTS_RELEASE
doesn't affect amdgpu_dev_coredump.o.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260428144704.1114562-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d785df5598fd1d1cc2f2f45c05448271b6d490b7)
|
|
Move kfd_process_remove_sysfs() earlier in kfd_process_wq_release() so
that all sysfs/procfs entries are removed before tearing down PDDs and
dropping lead_thread. The per-process sysfs attributes are backed by
struct kfd_process_device, and their show/store callbacks dereference
PDD fields. Since sysfs removal waits for active callbacks to complete,
removing these entries first closes a race where userspace reads sdma_*
and stats_* files after PDD teardown.
Previously this cleanup ran after kfd_process_destroy_pdds(), which
resets p->n_pdds to 0. This meant kfd_process_remove_sysfs() could no
longer walk the PDD array, so the per-PDD sysfs cleanup did not run as
intended.
This race caused NULL pointer dereferences observed in
kfd_sdma_activity_worker and kfd_procfs_stats_show.
Also harden kfd_process_remove_sysfs() against partially
initialized or already-freed objects:
- Check kobj_queues before removing PASID and deleting it
- Guard kobj_stats and kobj_counters before use
These checks prevent invalid dereferences during cleanup.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 674c692702341fed321720b4b92036c5934fb485)
|
|
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
Fixes: ac9287055ff1 ("drm/amdgpu: add gfx shadow CS IOCTL support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657)
Cc: stable@vger.kernel.org
|
|
The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks
up the bo_va for the buffer object in the caller's VM via
amdgpu_vm_bo_find(), but uses the returned pointer without checking it.
amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM,
which is the normal case for a BO that has never been mapped. The result
is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which
expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and
dereferences bo_va, causing a NULL pointer dereference.
This is reachable by any process able to issue the ioctl (render group)
simply by requesting mapping info for an unmapped BO.
Return -ENOENT when no bo_va is found, jumping to out_exec so the
drm_exec context and GEM object reference are released.
Fixes: 4d82724f7f2b ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9)
Cc: stable@vger.kernel.org
|
|
If there is an early failure during amdgpu probe, like missing firmware, it
will end up calling amdgpu_irq_disable_all, which takes irq.lock spinlock
without it being initialized.
Initializing irq.lock earlier at amdgpu_device_init fixes the issue.
[ 79.334079] INFO: trying to register non-static key.
[ 79.334081] The code is fine but needs lockdep annotation, or maybe
[ 79.334083] you didn't initialize this object before use?
[ 79.334084] turning off the locking correctness validator.
[ 79.334088] CPU: 2 UID: 0 PID: 1819 Comm: bash Not tainted 7.1.0-rc5-gfd06300b2348 #96 PREEMPT 8e8f461221633dae3c832d6689eaf0546c0ed4cd
[ 79.334092] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0133 08/05/2024
[ 79.334094] Call Trace:
[ 79.334095] <TASK>
[ 79.334097] dump_stack_lvl+0x5d/0x80
[ 79.334103] register_lock_class+0x7af/0x7c0
[ 79.334109] __lock_acquire+0x416/0x2610
[ 79.334114] lock_acquire+0xcf/0x310
[ 79.334117] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334503] ? _raw_spin_lock_irqsave+0x53/0x60
[ 79.334508] _raw_spin_lock_irqsave+0x3f/0x60
[ 79.334510] ? amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.334881] amdgpu_irq_disable_all+0x3b/0xf0 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335240] amdgpu_device_fini_hw+0x90/0x32c [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.335704] amdgpu_driver_load_kms.cold+0x22/0x44 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336159] amdgpu_pci_probe+0x204/0x440 [amdgpu c88bab43d391d519ad0d5c8e5a099b4aceefa180]
[ 79.336494] local_pci_probe+0x3c/0x80
[ 79.336500] pci_call_probe+0x55/0x2e0
[ 79.336505] ? _raw_spin_unlock+0x2d/0x50
[ 79.336508] ? pci_match_device+0x157/0x180
[ 79.336512] pci_device_probe+0x9b/0x170
[ 79.336516] really_probe+0xd5/0x370
[ 79.336521] __driver_probe_device+0x84/0x150
[ 79.336525] device_driver_attach+0x47/0xb0
[ 79.336528] bind_store+0x73/0xc0
[ 79.336531] kernfs_fop_write_iter+0x176/0x250
[ 79.336536] vfs_write+0x24d/0x560
[ 79.336542] ksys_write+0x71/0xe0
[ 79.336546] do_syscall_64+0x122/0x710
[ 79.336550] ? do_syscall_64+0xd1/0x710
[ 79.336553] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 79.336557] RIP: 0033:0x7f92fd675006
[ 79.336561] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 79.336562] RSP: 002b:00007ffe4fa867a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 79.336565] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f92fd675006
[ 79.336567] RDX: 000000000000000d RSI: 000055b2dfce59b0 RDI: 0000000000000001
[ 79.336568] RBP: 00007ffe4fa867c0 R08: 0000000000000000 R09: 0000000000000000
[ 79.336569] R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d
[ 79.336570] R13: 000055b2dfce59b0 R14: 00007f92fd7ca5c0 R15: 000055b2dfdbaf70
[ 79.336574] </TASK>
Fixes: 9950cda2a018 ("drm/amdgpu: drop the drm irq pre/post/un install callbacks")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7dba3e10ecdeec85208e255853fcd3890880b10e)
|
