| Age | Commit message (Collapse) | Author |
|---|
|
On some systems the BIOS will disable the VGA decode logic in the
iGPU (via GMCH_CTRL) when an external GPU is used as the primary
VGA device. In that case the iGPU will never claim any VGA register
accesses, and any access we do will in fact end up on the external
GPU. Don't go poking around in the other GPUs' registers.
Note that (at least on the g4x board where I tested this) the BIOS
forgets to set the VGACNTR VGA_DISP_DISABLE bit, and the reset
value for said bit is 0. That apparently prevents the pipes from
running, so we must still remember to set the bit, despite the VGA
plane was never actually enabled. On more modern platforms (hsw+
maybe?) the reset value for VGACNTR was changed to have
VGA_DISP_DISABLE already set.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|
|
Extract the GMCH_CTLR register offset determination into a helper
rather than using a local varaible. I'll be needing this in another
function soon.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We no longer have any need for the has_vga flag in the
display power well descriptor. Get rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Remove the MSR VGA register access from the power well hook, and
just do it once in intel_vga_disable().
Turns out that the hardware has two levels of MDA vs. CGA decode
logic: GPU level and display engine level. When we write the MSR
register MDA/CGA mode selection bit both decode logics are updated
accordingly, so that whichever register accessed the GPU claims
will also be claimed by the display engine on the RMbus. If the
two get out of sync the GPU will claim the register accesses but
the display engine will not, leading to RMbus NoClaim errors.
The way to get the two decode logics out of sync is by resetting
the power well housing the VGA stuff, while we are in CGA mode.
At that point only the display engine level decode logic will be
updated with the new MSR register reset value (which selects MDA
mode), and the GPU level decode logic will retain its previous
state (GGA mode). To avoid the mismatch we just have to switch
to MDA mode with an explicit MSR register write.
Currently this is being done in a somewhat dodgy manner whenever
the power well gets enabled. But doing if from the power well
hook is not actually necessary since the GPU level decode logic
will retain its state even when the power well is disabled. Ie.
doing it just the one time is sufficient, and that can be done
when we're anyway writing other VGA registers while disabling
the VGA plane.
See commit f9dcb0dfee98 ("drm/i915: touch VGA MSR after we
enable the power well") for the original details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we register to vgaarb way too early. Thus it is
possible that the entire VGA decode logic gets nuked via
GMCH_CTRL before intel_vga_disable() has even disabled the
VGA plane. This could even cause a system hang because
we'll be unable to turn off the VGA plane gracefully.
Move the vgaarb registration into intel_display_driver_register().
I suppose we could do it a bit earlier (after intel_vga_disable()),
but not convinced there's any point.
Also the error handling here is pointless since the
registration can't fail (unless the device isn't a VGA class
in which case all VGA decode logic should aleady be disabled
by the BIOS via GMCH_CTRL). But let's toss in a WARN to catch
any future breakage of vga_client_register().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20260119
1. Fix platform_get_irq() error checking
2. HDMI DDC v2 driver fixes
3. dpi: Find next bridge during probe
4. mtk_gem: Partial refactor and use drm_gem_dma_object
5. dt-bindings: Fix typo 'hardwares' to 'hardware'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patch.msgid.link/20260119154717.4735-1-chunkuang.hu@kernel.org
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Don't enable Panel Replay on sink if globally disabled
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aXHZjieG9PkFKjZ2@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.19-2026-01-22:
amdgpu:
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260122204308.946339-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Disallow bind-queue sharing across multiple VMs (Matt Auld)
Core Changes:
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE (Thomas)
Driver Changes:
- Fix a missed page count update (Matt Brost)
- Fix a confused argument to alloc_workqueue() (Marco Crivellari)
- Kernel-doc fixes (Jani)
- Disable a workaround on VFs (Matt Brost)
- Fix a job lock assert (Matt Auld)
- Update wedged.mode only after successful reset policy change (Lukasz)
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected (Thomas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aXIdiXaY-RxoaviV@fedora
|
|
This reverts commit bc6d54ac7e7436721a19443265f971f890c13cc5.
The workload profile needs to be in the default state when
the dc idle optimizaion state is entered. However, when
jobs come in for video or GFX or compute, the profile may
be set to a non-default profile resulting in the dc idle
optimizations not taking affect and resulting in higher
power usage. As such we need to pause the workload profile
changes during this transition. When this patch was originally
committed, it caused a regression with a Dell U3224KB display,
but no other problems were reported at the time. When it
was reapplied (this patch) to address increased power usage, it
seems to have caused additional regressions. This change seems
to have a number of side affects (audio issues, stuttering,
etc.). I suspect the pause should only happen when all displays
are off or in static screen mode, but I think this call site
gets called more often than that which results in idle state
entry more often than intended. For now revert.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4894
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4717
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4725
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4517
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4806
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1412482b714358ffa30d38fd3dd0b05795163648)
|
|
This reverts commit bc6d54ac7e7436721a19443265f971f890c13cc5.
The workload profile needs to be in the default state when
the dc idle optimizaion state is entered. However, when
jobs come in for video or GFX or compute, the profile may
be set to a non-default profile resulting in the dc idle
optimizations not taking affect and resulting in higher
power usage. As such we need to pause the workload profile
changes during this transition. When this patch was originally
committed, it caused a regression with a Dell U3224KB display,
but no other problems were reported at the time. When it
was reapplied (this patch) to address increased power usage, it
seems to have caused additional regressions. This change seems
to have a number of side affects (audio issues, stuttering,
etc.). I suspect the pause should only happen when all displays
are off or in static screen mode, but I think this call site
gets called more often than that which results in idle state
entry more often than intended. For now revert.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4894
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4717
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4725
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4517
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4806
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mali's CSF firmware triggers the job IRQ whenever there's new firmware
events for processing. While this can be a global event (BIT(31) of the
status register), it's usually an event relating to a command stream
group (the other bit indices).
Panthor throws these events onto a workqueue for processing outside the
IRQ handler. It's therefore useful to have an instrumented tracepoint
that goes beyond the generic IRQ tracepoint for this specific case, as
it can be augmented with additional data, namely the events bit mask.
This can then be used to debug problems relating to GPU jobs events not
being processed quickly enough. The duration_ns field can be used to
work backwards from when the tracepoint fires (at the end of the IRQ
handler) to figure out when the interrupt itself landed, providing not
just information on how long the work queueing took, but also when the
actual interrupt itself arrived.
With this information in hand, the IRQ handler itself being slow can be
excluded as a possible source of problems, and attention can be directed
to the workqueue processing instead.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260116-panthor-tracepoints-v10-4-d925986e3d1b@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Mali GPUs have three registers that indicate which parts of the hardware
are powered at any moment. These take the form of bitmaps. In the case
of SHADER_READY for example, a high bit indicates that the shader core
corresponding to that bit index is powered on. These bitmaps aren't
solely contiguous bits, as it's common to have holes in the sequence of
shader core indices, and the actual set of which cores are present is
defined by the "shader present" register.
When the GPU finishes a power state transition, it fires a
GPU_IRQ_POWER_CHANGED_ALL interrupt. After such an interrupt is
received, the _READY registers will contain new interesting data. During
power transitions, the GPU_IRQ_POWER_CHANGED interrupt will fire, and
the registers will likewise contain potentially changed data.
This is not to be confused with the PWR_IRQ_POWER_CHANGED_ALL interrupt,
which is something related to Mali v14+'s power control logic. The
_READY registers and corresponding interrupts are already available in
v9 and onwards.
Expose the data as a tracepoint to userspace. This allows users to debug
various scenarios and gather interesting information, such as: knowing
how much hardware is lit up at any given time, correlating graphics
corruption with a specific powered shader core, measuring when hardware
is allowed to go to a powered off state again, and so on.
The registration/unregistration functions for the tracepoint go through
a wrapper in panthor_hw.c, so that v14+ can implement the same
tracepoint by adding its hardware specific IRQ on/off callbacks to the
panthor_hw.ops member.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260116-panthor-tracepoints-v10-3-d925986e3d1b@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
The current IRQ helpers do not guarantee mutual exclusion that covers
the entire transaction from accessing the mask member and modifying the
mask register.
This makes it hard, if not impossible, to implement mask modification
helpers that may change one of these outside the normal
suspend/resume/isr code paths.
Add a spinlock to struct panthor_irq that protects both the mask member
and register. Acquire it in all code paths that access these, but drop
it before processing the threaded handler function. Then, add the
aforementioned new helpers: enable_events, and disable_events. They work
by ORing and NANDing the mask bits.
resume is changed to no longer have a mask passed, as pirq->mask is
supposed to be the user-requested mask now, rather than a mirror of the
INT_MASK register contents. Users of the resume helper are adjusted
accordingly, including a rather painful refactor in panthor_mmu.c.
In panthor_mmu.c, the bespoke mask modification is excised, and replaced
with enable_events/disable_events in as_enable/as_disable.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260116-panthor-tracepoints-v10-2-d925986e3d1b@collabora.com
|
|
To deal with the threaded interrupt handler and a suspend action
overlapping, the boolean panthor_irq::suspended is not sufficient.
Rework it into taking several different values depending on the current
state, and check it and set it within the IRQ helper functions.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260116-panthor-tracepoints-v10-1-d925986e3d1b@collabora.com
|
|
CONFIG_DEVICE_PRIVATE is a prerequisite for DRM_XE_GPUSVM.
Explicitly select it so that DRM_XE_GPUSVM is not unintentionally
left out from distro configs not explicitly enabling
CONFIG_DEVICE_PRIVATE.
v2:
- Select also CONFIG_ZONE_DEVICE since it's needed by
CONFIG_DEVICE_PRIVATE.
v3:
- Depend on CONFIG_ZONE_DEVICE rather than selecting it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260121091048.41371-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9386f49316074d2d76fd78d6bd359996de42fb7f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The VRAM/stolen memory managers do not currently set
DRM_BUDDY_CONTIGUOUS_ALLOCATION for contiguous allocations. Enabling
this flag activates the buddy allocator's try_harder path, which helps
handle fragmented memory scenarios.
This enables the __alloc_contig_try_harder fallback in the buddy
allocator, allowing contiguous allocation requests to succeed even when
memory is fragmented by combining allocations from both(RHS and LHS)
sides of a large free block.
v2: (Matt B)
- Remove redundant logic for rounding allocation size and trimming when
TTM_PL_FLAG_CONTIGUOUS is set, since drm_buddy now handles this when
DRM_BUDDY_CONTIGUOUS_ALLOCATION is enabled
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6713
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260121111416.3104399-2-sanjay.kumar.yadav@intel.com
|
|
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b246199ca7a35f930177fea91b557dac16e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
intel_color_pipeline_plane_init() allocates enum names for color
pipelines, which are copied by drm_property_create_enum(). The temporary
strings were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and free
them on all exit paths.
Fixes: ef105316819d ("drm/i915/color: Create a transfer function color pipeline")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260113102303.724205-5-chaitanya.kumar.borah@intel.com
|
|
vkms_initialize_colorops() allocates enum names for color pipelines,
which are copied by drm_property_create_enum(). The temporary strings
were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and
free them on all exit paths
Fixes: c1e578bd08da ("drm/vkms: Add enumerated 1D curve colorop")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260113102303.724205-4-chaitanya.kumar.borah@intel.com
|
|
dm_plane_init_colorops() allocates enum names for color pipelines.
These are eventually passed to drm_property_create_enum() which create
its own copies of the string. Free the strings after initialization
is done.
Also, allocate color pipeline enum names only after successfully creating
color pipeline.
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com> #irc
Link: https://patch.msgid.link/20260113102303.724205-3-chaitanya.kumar.borah@intel.com
|
|
Move the 3D LUT block to its correct position in the plane
color pipeline:
[Pre-CSC] -> [CSC] -> [3DLUT] -> [Post-CSC]
Fixes: 65db7a1f9cf7 ("drm/i915/color: Add 3D LUT to color pipeline")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260113102303.724205-2-chaitanya.kumar.borah@intel.com
|
|
CONFIG_DEVICE_PRIVATE is a prerequisite for DRM_XE_GPUSVM.
Explicitly select it so that DRM_XE_GPUSVM is not unintentionally
left out from distro configs not explicitly enabling
CONFIG_DEVICE_PRIVATE.
v2:
- Select also CONFIG_ZONE_DEVICE since it's needed by
CONFIG_DEVICE_PRIVATE.
v3:
- Depend on CONFIG_ZONE_DEVICE rather than selecting it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260121091048.41371-3-thomas.hellstrom@linux.intel.com
|
|
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
|
|
Include gvt/display_helpers.h so that the display register macros in
intel_gvt_mmio_table.c expand through the exported display functions.
This lets us keep the existing macro calls while avoiding direct
access to display internals, helping the display modularization work.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260114025456.1639171-1-ankit.k.nautiyal@intel.com
|
|
Adreno 840 GPU supports UBWC v6. Add support for this.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/700073/
Link: https://lore.kernel.org/r/20260121-kaana-gpu-support-v5-1-984848af12e4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
It seems, on SC7180 color conversion results are not included into the
CRC calculation (unlike SM8350). The fails for SC7180 already lists CTM
tests. Add gamma-related tests too.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/699820/
Link: https://lore.kernel.org/r/20260121-dpu-sc7180-ignore-gamma-v1-1-84f2cc2beeb1@oss.qualcomm.com
|
|
Add support for DSPP GC block in DPU driver for Qualcomm SoCs.
Expose the GAMMA_LUT DRM property, which is needed to enable
night light and basic screen color calibration.
I used LineageOS downstream kernel as a reference and found the LUT
format by trial-and-error on OnePlus 6.
Tested on oneplus-enchilada (sdm845-mainline 6.16-dev) and xiaomi-tissot
(msm8953-mainline 6.12/main).
Tested-by: David Heidelberg <david@ixit.cz> # Pixel 3 (next-20251018)
Tested-by: Guido Günther <agx@sigxcpu.org> # on sdm845-shift-axolotl
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
Tested-by: Steev Klimaszewski <threeway@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/682102/
Link: https://lore.kernel.org/r/20251019-dpu-add-dspp-gc-driver-v3-1-840491934e56@izzo.pro
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Apparently we never actually filled these in, despite the fact that we do
in fact technically support atomic modesetting.
Since not having these filled in causes us to potentially forget to disable
fbdev and friends during suspend/resume, let's fix it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260121191320.210342-1-lyude@redhat.com
|
|
unknown connectors
* Implement missing DCB connectors in uconn.c previously defined in conn.h.
* Replace kernel WARN_ON macro with printk message to more gracefully signify
an unknown connector was encountered.
With this patch, unknown connectors are explicitly marked with value 0
(DCB_CONNECTOR_VGA) to match the tested current behavior. Although 0xff
(DCB_CONNECTOR_NONE) may be more suitable, I don't want to introduce a
breaking change.
Fixes: 8b7d92cad953 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Remove unneeded parenthesis around nvkm_warn()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-3-lxrmrz732@gmail.com
|
|
* Add missing DCB connectors in conn.h as per the NVIDIA DCB specification.
A lot of connector logic was rewritten for Linux v6.5; some display connector types
went unaccounted-for which caused kernel warnings on devices with the now-unsupported
DCB connectors. This patch adds all of the DCB connectors as defined by NVIDIA to the
dcb_connector_type enum to bring back support for these connectors to the new logic.
Fixes: 8b7d92cad953 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Clarify DCB_CONNECTOR_HDMI_0 weirdness in comments]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-2-lxrmrz732@gmail.com
|
|
Needs to be a u64.
Fixes: 77cc0da39c7c ("drm/amdgpu: track ring state associated with a fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 56fff1941abd3ca3b6f394979614ca7972552f7f)
|
|
When a function holds a lock and we return without unlocking it,
it deadlocks the kernel. We should always unlock before returning.
This commit fixes suspend/resume on SI.
Tested on two Tahiti GPUs: FirePro W9000 and R9 280X.
Fixes: f4db9913e4d3 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601190121.z9C0uml5-lkp@intel.com/
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e3a6eff92bbd960b471966d9afccb4d584546d17)
|
|
Radeon 430 and 520 are OEM GPUs from 2016~2017
They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU,
never allowing it to reach its maximum SCLK. Work around this
bug by raising the TDP limits we program to the SMC from
24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the
above issue, these GPUs never reached a high SCLK on Linux,
and the workarounds were added before the GPUs were released,
so the workaround likely didn't target these specifically.
Use 780 MHz (the maximum SCLK according to the VBIOS on the
Radeon 430). Note that the Radeon 520 VBIOS has a higher
maximum SCLK: 905 MHz, but in practice it doesn't seem to
perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 966d70f1e160bdfdecaf7ff2b3f22ad088516e9f)
|
|
There is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e214d626253f5b180db10dedab161b7caa41f5e9)
|
|
Use WREG32 to write mmCG_THERMAL_INT.
This is a direct access register.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2555f4e4a741d31e0496572a8ab4f55941b4e30e)
|
|
The function no longer signals the fence so rename it to
better match what it does.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needs to be a u64.
Fixes: 77cc0da39c7c ("drm/amdgpu: track ring state associated with a fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
set retired_page of invalid ras records to U64_MAX, and skip
them when reading ras records
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KIQ access is not guaranteed to work reliably under all reset
situations. Avoid flooding dmesg with HDP flush failure messages.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When a function holds a lock and we return without unlocking it,
it deadlocks the kernel. We should always unlock before returning.
This commit fixes suspend/resume on SI.
Tested on two Tahiti GPUs: FirePro W9000 and R9 280X.
Fixes: f4db9913e4d3 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601190121.z9C0uml5-lkp@intel.com/
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function calls bitmap_or() followed by for_each_set_bit().
Switch it to the dedicated for_each_or_bit() and drop the temporary
bitmap.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The current trap handler uses the top bits of ttmp1 to store a copy of
sq_wave_mode.*vgpr_msb (except for src2_vgpr_msb). This is so the
effective values in sq_wave_mode can be cleared to ensure correct
behavior of the trap handler.
When saving sq_wave_mode, the trap handler correctly rebuilds the
expected value (with *vgpr_msb restored), so the save area is correct.
However, the PC itself is copied from ttmp[0:1], which contains the
wave's PC as well as the saved MSBs.
The debugger reads the PC from the save area and is confused when non-0
values from VGPR_MSBs are present.
This patch fixes this by saving the PC in the save area's PC slot, not
the composite of the PC and VGPR_MSBs. On restore, the VGPR_MSBs are
restored from sq_wave_mode.
Signed-off-by: Lancelot Six <lancelot.six@amd.com>
Tested-by: Alexey Kondratiev <Alexey.Kondratiev@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Vladimir Indic <vladimir.indic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously only Van Gogh supported this, but that is not true
anymore since:
commit 12c958d1db36 ("drm/amd/pm: Expose ppt1 limit for gc_v9_5_0")
Update the comment to reflect that.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that hwmon_attributes_visible() will see that the power2_cap
attributes should not be visible on GPUs that don't support
the get_power_limit() function.
This fixes an error when running the "sensors" command on SI.
Fixes: 12c958d1db36 ("drm/amd/pm: Expose ppt1 limit for gc_v9_5_0")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Radeon 430 and 520 are OEM GPUs from 2016~2017
They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU,
never allowing it to reach its maximum SCLK. Work around this
bug by raising the TDP limits we program to the SMC from
24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the
above issue, these GPUs never reached a high SCLK on Linux,
and the workarounds were added before the GPUs were released,
so the workaround likely didn't target these specifically.
Use 780 MHz (the maximum SCLK according to the VBIOS on the
Radeon 430). Note that the Radeon 520 VBIOS has a higher
maximum SCLK: 905 MHz, but in practice it doesn't seem to
perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Leave DEP_MODE unchanged as it is ignored in the trap handler
- Save/restore SCHED_MODE (gfx12.0 saves in ttmp11)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Cc: Vladimir Indic <vladimir.indic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Trap cluster barrier may not serialize with user cluster barrier
under some circumstances. Add a check for pending user cluster
barrier complete.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Gang Ba <Gang.Ba@amd.com>
Cc: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Cc: Vladimir Indic <vladimir.indic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
