| Age | Commit message (Collapse) | Author |
|---|
|
Setting bit i in the TPDA_FLUSH_CR register initiates a flush request
for port i, forcing the data to synchronize and be transmitted to the
sink device.
Signed-off-by: Tao Zhang <tao.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
[ Fix kernel version in Documentation ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251223-add_sysfs_nodes_to_configure_tpda-v8-4-4c95db608b62@oss.qualcomm.com
|
|
The TPDA_SYNC counter tracks the number of bytes transferred from the
aggregator. When this count reaches the value programmed in the
TPDA_SYNCR register, an ASYNC request is triggered, allowing userspace
tools to accurately parse each valid packet.
Signed-off-by: Tao Zhang <tao.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
[ Fix kernel version in Documentation ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251223-add_sysfs_nodes_to_configure_tpda-v8-3-4c95db608b62@oss.qualcomm.com
|
|
Setting the global_flush_req register to 1 initiates a flush request for
all enabled TPDA input ports. The register remains set until the flush
operation is complete.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
[ Fix kernel version in the Documentation ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251223-add_sysfs_nodes_to_configure_tpda-v8-2-4c95db608b62@oss.qualcomm.com
|
|
Introduce sysfs nodes to configure cross-trigger parameters for TPDA.
These registers define the characteristics of cross-trigger packets,
including generation frequency and flag values.
Signed-off-by: Tao Zhang <tao.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
[ Fix kernel version in the Documentation ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251223-add_sysfs_nodes_to_configure_tpda-v8-1-4c95db608b62@oss.qualcomm.com
|
|
'timestamp' is currently 1 bit wide for on/off. To enable setting
different intervals, extend it to 4 bits wide. Keep the old bit position
for backward compatibility ("deprecated_timestamp") but don't publish in
the format/ folder. It will be removed from the documentation and can be
removed completely after enough time has passed.
ETM3x doesn't support different intervals, so validate that the value is
either 0 or 1.
Tools that read the bit positions from the format/ folder will continue
to work as before, setting either 0 or 1 for off/on. Tools that
incorrectly didn't do this and set the ETM_OPT_TS bit directly will also
continue to work because that old bit is still checked.
This avoids adding a second timestamp attribute for setting the
interval. This would be awkward to use because tools would have to be
updated to ensure that the timestamps are always enabled when an
interval is set, and the driver would have to validate that both options
are provided together. All this does is implement the semantics of a
single enum but spread over multiple fields.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-12-4d319764cc58@linaro.org
|
|
Timestamps are currently emitted at the maximum rate possible, which is
much too frequent for most use cases. In the next commit, the timestamp
field will be widened to take a value, so set the interval using the
value now. Granular control is not required, so save space in the config
by interpreting it as 2 ^ timestamp. And then 4 bits (0 - 15) will be
enough to set the interval to be larger than the existing SYNC timestamp
interval.
No sysfs mode support is needed for this attribute because counter
generated timestamps are only configured for Perf mode.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-11-4d319764cc58@linaro.org
|
|
Remove hard coded bitfield extractions and shifts and replace with
ATTR_CFG_GET_FLD().
ETM4_CFG_BIT_BB was defined to give the register bit positions to
userspace, TRCCONFIGR_BB should be used in the kernel so replace it.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-9-4d319764cc58@linaro.org
|
|
The "config:" string construction in format_attr_contextid_show() can be
removed because it either showed the existing context1 or context2
formats which have already been generated, so can be called themselves.
The other conversions are straightforward replacements.
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-8-4d319764cc58@linaro.org
|
|
config isn't the only field, there are also config1, config2, etc.
Rejecting unrecognized attributes is therefore inconsistent as it wasn't
done for all fields. It was only necessary when we were directly
programming attr->config into ETMCR and didn't hide the unsupported
fields, but now it's not needed so remove it.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-7-4d319764cc58@linaro.org
|
|
Currently we're programming attr->config directly into ETMCR after some
validation. This obscures which fields are being used, and also makes it
impossible to move fields around or use other configN fields in the
future.
Improve it by only reading the fields that are valid and then setting
the appropriate ETMCR bits based on each one.
The ETMCR_CTXID_SIZE part can be removed as it was never a valid option
because it's not in ETM3X_SUPPORTED_OPTIONS.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-6-4d319764cc58@linaro.org
|
|
This allows us to define and consume them in a unified way in later
commits.
A lot of the existing code has open coded bit shifts or direct usage of
whole config values which is error prone and hides which bits are in use
and which are free.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-5-4d319764cc58@linaro.org
|
|
ETMv3 only has a few attributes, and setting unused ones results in an
error, so hide them to begin with.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-4-4d319764cc58@linaro.org
|
|
Remove some of the magic numbers and try to clarify some of the
documentation so it's clearer how this sets up the timestamp interval.
Return errors directly instead of jumping to out and returning ret,
nothing needs to be cleaned up at the end and it only obscures the flow
and return value.
Add utilities for programming resource selectors that do compile time
checks for constants or WARN_ONs for non-constant values. FIELD_PREP
includes compile time checks so we only need to add an additional
BUILD_BUG_ON for resource == 0 in pair mode.
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-3-4d319764cc58@linaro.org
|
|
Fix holes and convert the long list of bools to single bits to save
some space because there's one of these for each ETM.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-2-4d319764cc58@linaro.org
|
|
TRCSYNCPR.PERIOD is the only functional part of TRCSYNCPR and it only
has 5 valid bits so it can be stored in a u8.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-1-4d319764cc58@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
intel_th_output_open() calls bus_find_device_by_devt() which
internally increments the device reference count via get_device(), but
this reference is not properly released in several error paths. When
device driver is unavailable, file operations cannot be obtained, or
the driver's open method fails, the function returns without calling
put_device(), leading to a permanent device reference count leak. This
prevents the device from being properly released and could cause
resource exhaustion over time.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 39f4034693b7 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251112091723.35963-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.19
The changes for Linux v6.19 include :
- Support for static TPDM
- Fixes to TMC-ETR with CATU where buffer wasn't available to CATU in perf mode
- Clean ups to the component operations to accept coresight_path
- Fixes to the ETM4x/ETM3x driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: Remove the state_needs_restore flag
coresight: etm4x: Remove the redundant DSB
coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF
coresight: etm4x: Add context synchronization before enabling trace
coresight: etm4x: Correct polling IDLE bit
coresight: etm3x: Always set tracer's device mode on target CPU
coresight: etm4x: Always set tracer's device mode on target CPU
coresight: Change device mode to atomic type
coresight: change the sink_ops to accept coresight_path
coresight: change helper_ops to accept coresight_path
coresight: tmc: add the handle of the event to the path
coresight: tpdm: remove redundant check for drvdata
coresight: tpdm: add static tpdm support
dt-bindings: arm: document the static TPDM compatible
coresight: ETR: Fix ETR buffer use-after-free issue
|
|
When the restore flow is invoked, it means no error occurred during the
save phase. Otherwise, if any errors happened while saving the context,
the function would return an error and abort the suspend sequence.
Therefore, the state_needs_restore flag is unnecessary. The save and
restore functions are changed to check two conditions:
1) The global flag pm_save_enable is SELF_HOSTED mode;
2) The device is in active mode (non DISABLED).
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-8-f55553b6c8b3@arm.com
|
|
As recommended in section 4.3.7 "Synchronization when using the
memory-mapped interface" of ARM IHI0064H.b:
When using the memory-mapped interface to program the trace unit, the
trace analyzer must ensure that writes have completed, to ensure that
the trace unit is fully programmed and either enabled or disabled.
To ensure writes have completed, the trace analyzer can do ...
If the memory marked is as Device-nGnRE or stronger, read back the
value of any register in the trace unit. This relies on peripheral
coherence order defined in the Arm architecture.
Polling TRCSTATR ensures the previous write has completed. Therefore,
removes the redundant DSB barrier in the enabling flow.
Update the comment in the disable flow for consistency.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-7-f55553b6c8b3@arm.com
|
|
If a CPU supports FEAT_TRF, as described in the section K5.5 "Context
switching", Arm ARM (ARM DDI 0487 L.a), it defines a flow to prohibit
program-flow trace, execute a TSB CSYNC instruction for flushing,
followed by clearing TRCPRGCTLR.EN bit.
To restore the state, the reverse sequence is required.
This differs from the procedure described in the section 3.4.1 "The
procedure when powering down the PE" of ARM IHI0064H.b, which involves
the OS Lock to prevent external debugger accesses and implicitly
disables trace.
To be compatible with different ETM versions, explicitly control trace
unit using etm4_disable_trace_unit() and etm4_enable_trace_unit()
during CPU idle to comply with FEAT_TRF.
As a result, the save states for TRFCR_ELx and trcprgctlr are redundant,
remove them.
Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-6-f55553b6c8b3@arm.com
|
|
According to the software usage PKLXF in Arm ARM (ARM DDI 0487 L.a), a
Context synchronization event is required before enabling the trace
unit.
An ISB is added to meet this requirement, particularly for guarding the
operations in the flow:
etm4x_allow_trace()
`> kvm_tracing_set_el1_configuration()
`> write_sysreg_s(trfcr_while_in_guest, SYS_TRFCR_EL12)
Improved the barrier comments to provide more accurate information.
Fixes: 1ab3bb9df5e3 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Yeoreun Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-5-f55553b6c8b3@arm.com
|
|
Since commit 4ff6039ffb79 ("coresight-etm4x: add isb() before reading
the TRCSTATR"), the code has incorrectly been polling the PMSTABLE bit
instead of the IDLE bit.
This commit corrects the typo.
Fixes: 4ff6039ffb79 ("coresight-etm4x: add isb() before reading the TRCSTATR")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-4-f55553b6c8b3@arm.com
|
|
The ETMv3 driver shares the same issue as ETMv4 regarding race
conditions when accessing the device mode.
This commit applies the same fix: ensuring that the device mode is
modified only by the target CPU to eliminate race conditions across
CPUs.
Fixes: 22fd532eaa0c ("coresight: etm3x: adding operation mode for etm_enable()")
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-3-f55553b6c8b3@arm.com
|
|
When enabling a tracer via SysFS interface, the device mode may be set
by any CPU - not necessarily the target CPU. This can lead to race
condition in SMP, and may result in incorrect mode values being read.
Consider the following example, where CPU0 attempts to enable the tracer
on CPU1 (the target CPU):
CPU0 CPU1
etm4_enable()
` coresight_take_mode(SYSFS)
` etm4_enable_sysfs()
` smp_call_function_single() ----> etm4_enable_hw_smp_call()
/
/ CPU idle:
/ etm4_cpu_save()
/ ` coresight_get_mode()
Failed to enable h/w / ^^^
` coresight_set_mode(DISABLED) <-' Read the intermediate SYSFS mode
In this case, CPU0 initiates the operation by taking the SYSFS mode to
avoid conflicts with the Perf mode. It then sends an IPI to CPU1 to
configure the tracer registers. If any error occurs during this process,
CPU0 rolls back by setting the mode to DISABLED.
However, if CPU1 enters an idle state during this time, it might read
the intermediate SYSFS mode. As a result, the CPU PM flow could wrongly
save and restore tracer context that is actually disabled.
To resolve the issue, this commit moves the device mode setting logic on
the target CPU. This ensures that the device mode is only modified by
the target CPU, eliminating race condition between mode writes and reads
across CPUs.
An additional change introduces the etm4_disable_sysfs_smp_call()
function for SMP calls, which disables the tracer and explicitly set the
mode to DISABLED during SysFS operations. Rename
etm4_disable_hw_smp_call() to etm4_disable_sysfs_smp_call() for naming
consistency.
The flow is updated with this change:
CPU0 CPU1
etm4_enable()
` etm4_enable_sysfs()
` smp_call_function_single() ----> etm4_enable_hw_smp_call()
` coresight_take_mode(SYSFS)
Failed, set back to DISABLED
` coresight_set_mode(DISABLED)
CPU idle:
etm4_cpu_save()
` coresight_get_mode()
^^^
Read out the DISABLED mode
Fixes: c38a9ec2b2c1 ("coresight: etm4x: moving etm_drvdata::enable to atomic field")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-2-f55553b6c8b3@arm.com
|
|
Update the sink_enable functions to accept coresight_path instead of
a generic void *data, as coresight_path encapsulates all the necessary
data required by devices along the path.
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250925-fix_helper_data-v2-3-edd8a07c1646@oss.qualcomm.com
|
|
Update the helper_enable and helper_disable functions to accept
coresight_path instead of a generic void *data, as coresight_path
encapsulates all the necessary data required by devices along the path.
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250925-fix_helper_data-v2-2-edd8a07c1646@oss.qualcomm.com
|
|
The handle is essential for retrieving the AUX_EVENT of each CPU and is
required in perf mode. It has been added to the coresight_path so that
dependent devices can access it from the path when needed.
The existing bug can be reproduced with:
perf record -e cs_etm//k -C 0-9 dd if=/dev/zero of=/dev/null
Showing an oops as follows:
Unable to handle kernel paging request at virtual address 000f6e84934ed19e
Call trace:
tmc_etr_get_buffer+0x30/0x80 [coresight_tmc] (P)
catu_enable_hw+0xbc/0x3d0 [coresight_catu]
catu_enable+0x70/0xe0 [coresight_catu]
coresight_enable_path+0xb0/0x258 [coresight]
Fixes: 080ee83cc361 ("Coresight: Change functions to accept the coresight_path")
Signed-off-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250925-fix_helper_data-v2-1-edd8a07c1646@oss.qualcomm.com
|
|
Remove the redundant check for drvdata data because the drvdata here
already has been guarranted to be non-NULL.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251107-fix_tpdm_redundant_check-v1-1-b63468a2dd73@oss.qualcomm.com
|
|
The static TPDM function as a dummy source, however, it is essential
to enable the port connected to the TPDA and configure the element size.
Without this, the TPDA cannot correctly receive trace data from the
static TPDM. Since the static TPDM does not require MMIO mapping to
access its registers, a clock controller is not mandatory for its
operation.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251028-add_static_tpdm_support-v4-2-84e21b98e727@oss.qualcomm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
When ETR is enabled as CS_MODE_SYSFS, if the buffer size is changed
and enabled again, currently sysfs_buf will point to the newly
allocated memory(buf_new) and free the old memory(buf_old). But the
etr_buf that is being used by the ETR remains pointed to buf_old, not
updated to buf_new. In this case, it will result in a memory
use-after-free issue.
Fix this by checking ETR's mode before updating and releasing buf_old,
if the mode is CS_MODE_SYSFS, then skip updating and releasing it.
Fixes: bd2767ec3df2 ("coresight: Fix run time warnings while reusing ETR buffer")
Signed-off-by: Xiaoqi Zhuang <xiaoqi.zhuang@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20251021-fix_etr_issue-v3-1-99a2d066fee2@oss.qualcomm.com
|
|
Let the TRBE driver request interrupts with an affinity mask matching the
TRBE implementation affinity.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://patch.msgid.link/20251020122944.3074811-21-maz@kernel.org
|
|
Now that the relevant interrupt controllers are equipped with a callback
returning the affinity of per-CPU interrupts, switch the TRBE driver over
to this new method.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://patch.msgid.link/20251020122944.3074811-8-maz@kernel.org
|
|
Now that the driver core can properly handle constant struct bus_type,
move the intel_th_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025091412-machine-despair-248e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
For some coresight components like CTI and TPDM, there could be
numerous of them. From the node name, we can only get the type and
register address of the component. We can't identify the HW or the
system the component belongs to. Add label sysfs node support for
showing the intuitive name of the device.
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250816072529.3716968-3-quic_jinlmao@quicinc.com
|
|
Add the new AMBA ID 0x001f0c00 to support Trace Noc V2 instances.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250814-tnoc_v2-v1-1-3285e37280c9@oss.qualcomm.com
|
|
The return value of devm_kzalloc could be an null pointer,
use "!desc.pdata" to fix incorrect handling return value
of devm_kzalloc.
Fixes: 4277f035d227 ("coresight: trbe: Add a representative coresight_platform_data for TRBE")
Signed-off-by: Lin Yujun <linyujun809@h-partners.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250908122022.1315399-1-linyujun809@h-partners.com
|
|
Some TPDM devices support both CMB and DSB datasets, requiring
the system to enable the port with both corresponding element sizes.
Currently, the logic treats tpdm_read_element_size as successful if
the CMB element size is retrieved correctly, regardless of whether
the DSB element size is obtained. This behavior causes issues
when parsing data from TPDM devices that depend on both element sizes.
To address this, the function should explicitly fail if the DSB
element size cannot be read correctly.
Fixes: e6d7f5252f73 ("coresight-tpda: Add support to configure CMB element")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250906-fix_element_size_issue-v2-1-dbb0ac2541a9@oss.qualcomm.com
|
|
When the TRBE driver fails to allocate a buffer, it currently returns
the error code "-ENOMEM". However, the caller etm_setup_aux() only
checks for a NULL pointer, so it misses the error. As a result, the
driver continues and eventually causes a kernel panic.
Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() on
allocation failures. This allows that the callers can properly handle
the failure.
Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250904-cs_etm_auxsetup_fix_error_handling-v2-1-a502d0bafb95@arm.com
|
|
The validation for driver data pointers and clock pointers are redundant
in the runtime PM callbacks. After a driver's probing, its driver data
and clocks have been initialized successfully, this ensures it is safe
to access driver data and clocks in the runtime PM callbacks. A corner
case is a clock pointer is NULL, in this case, the clock core layer can
handle it properly. So remove these redundant checking.
In runtime resume, respect values returned from clock function and add
error handling.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-10-1dfe10bb3f6f@arm.com
|
|
Since atclk is enabled after pclk during the probe phase, this commit
maintains the same sequence for the runtime resume flow.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-9-1dfe10bb3f6f@arm.com
|
|
The driver data no longer needs to be allocated separately in the static
and dynamic probes. Moved the allocation into the low-level functions to
avoid code duplication.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-8-1dfe10bb3f6f@arm.com
|
|
CoreSight drivers enable pclk and atclk conditionally. For example,
pclk is only enabled in the static probe, while atclk is an optional
clock that it is enabled for both dynamic and static probes, if it is
present. In the current CoreSight drivers, these two clocks are
initialized separately. This causes complex and duplicate codes.
CoreSight drivers are refined so that clocks are initialized in one go.
For this purpose, this commit renames coresight_get_enable_apb_pclk() to
coresight_get_enable_clocks() and encapsulates clock initialization
logic:
- If a clock is initialized successfully, its clock pointer is assigned
to the double pointer passed as an argument.
- For ACPI devices, clocks are controlled by firmware, directly bail
out.
- Skip enabling pclk for an AMBA device.
- If atclk is not found, the corresponding double pointer is set to
NULL. The function returns Success (0) to guide callers can proceed
with no error.
- Otherwise, an error number is returned for failures.
The function became complex, move it from the header to the CoreSight
core layer and the symbol is exported. Added comments for recording
details.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-7-1dfe10bb3f6f@arm.com
|
|
Some CoreSight components have trace bus clocks 'atclk' and are enabled
using clk_prepare_enable(). These clocks are not disabled when modules
exit.
As atclk is optional, use devm_clk_get_optional_enabled() to manage it.
The benefit is the driver model layer can automatically disable and
release clocks.
Check the returned value with IS_ERR() to detect errors but leave the
NULL pointer case if the clock is not found. And remove the error
handling codes which are no longer needed.
Fixes: d1839e687773 ("coresight: etm: retrieve and handle atclk")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-5-1dfe10bb3f6f@arm.com
|
|
Some CoreSight components have programming clocks (pclk) and are enabled
using clk_get() and clk_prepare_enable(). However, in many cases, these
clocks are not disabled when modules exit and only released by clk_put().
To fix the issue, this commit refactors programming clock by replacing
clk_get() and clk_prepare_enable() with devm_clk_get_optional_enabled()
for enabling APB clock. If the "apb_pclk" clock is not found, a NULL
pointer is returned, and the function proceeds to attempt enabling the
"apb" clock.
Since ACPI platforms rely on firmware to manage clocks, returning a NULL
pointer in this case leaves clock management to the firmware rather than
the driver. This effectively avoids a clock imbalance issue during
module removal - where the clock could be disabled twice: once during
the ACPI runtime suspend and again during the devm resource release.
Callers are updated to reuse the returned error value.
With the change, programming clocks are managed as resources in driver
model layer, allowing clock cleanup to be handled automatically. As a
result, manual cleanup operations are no longer needed and are removed
from the Coresight drivers.
Fixes: 73d779a03a76 ("coresight: etm4x: Change etm4_platform_driver driver for MMIO devices")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-4-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight ETMv4, but the driver
misses to initialize it.
This change enables atclk in probe of the ETMv4 driver, and dynamically
control the clock during suspend and resume.
No need to check the driver data and clock pointer in the runtime
suspend and resume, so remove checks. And add error handling in the
resume function.
Add a minor fix to the comment format when adding the atclk field.
Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-3-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight CATU, but the driver
misses to initialize it.
This change enables atclk in probe of the CATU driver, and dynamically
control the clock during suspend and resume.
The checks for driver data and clocks in suspend and resume are not
needed, remove them. Add error handling in the resume function.
Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address Translation Unit")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-2-1dfe10bb3f6f@arm.com
|
|
The atclk is an optional clock for the CoreSight TMC, but the driver
misses to initialize it. In most cases, TMC shares the atclk clock with
other CoreSight components. Since these components enable the clock
before the TMC device is initialized, the TMC continues properly,
which is why we don’t observe any lockup issues.
This change enables atclk in probe of the TMC driver. Given the clock
is optional, it is possible to return NULL if the clock does not exist.
IS_ERR() is tolerant for this case.
Dynamically disable and enable atclk during suspend and resume. The
clock pointers will never be error values if the driver has successfully
probed, and the case of a NULL pointer case will be handled by the clock
core layer. The driver data is always valid after probe. Therefore,
remove the related checks. Also in the resume flow adds error handling.
Fixes: bc4bf7fe98da ("coresight-tmc: add CoreSight TMC driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-1-1dfe10bb3f6f@arm.com
|
|
The TRCEXTINSELR is only implemented if TRCIDR5.NUMEXTINSEL > 0.
To avoid invalid accesses, introduce a check on numextinsel
(derived from TRCIDR5[11:9]) before reading or writing to this register.
Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses")
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250812-trcextinselr_issue-v2-1-e6eb121dfcf4@oss.qualcomm.com
|
