| Age | Commit message (Collapse) | Author |
|---|
|
Add an in-tree AVMatrix HWS PCIe capture driver. The driver supports
up to four HDMI inputs and exposes the video capture path through
V4L2 with vb2-dma-contig streaming, DV timings, and per-input
controls. Audio support is intentionally omitted from this
submission.
This patch also adds the MAINTAINERS entry for the new driver.
This driver is derived from a GPL out-of-tree driver.
Changes since v6:
- v6 accidently contained legacy history, resubmitting with latest
- remove an unused mode-change label reported by W=1
Changes since v5:
- keep queue_setup() and alloc_sizeimage on the logical sizeimage value
- drop the dead queue_setup() fallback that rebuilt pix.sizeimage
on the fly
- clarify that hws_calc_sizeimage() models the packed-YUYV-only path
- add Assisted-by attribution for Codex
Changes since v4:
- replace plain 64-bit elapsed-time divisions in debug logging with
div_u64() so i386 module builds do not emit __udivdi3 references
Changes since v3:
- fold the MAINTAINERS update into this patch so per-patch CI sees the
new file pattern
- wrap the validation text for checkpatch
Changes since v2:
- keep scratch DMA allocation on a single probe-owned path
- avoid double-freeing V4L2 control handlers on register unwind
- drop the extra per-node resolution sysfs ABI
- turn live geometry changes into explicit SOURCE_CHANGE renegotiation
- report live DV timings and reject attempts to retime a live source
- stop advertising RESOLUTION source changes for fps-only updates
- keep live fps state across harmless S_FMT restarts
- stop exposing an unvalidated DV RX power-present signal
- clean the imported sources for checkpatch and W=1 builds
Validation:
- build-tested with W=1 against a local kernel build tree
- compiled the driver with ARCH=i386 allmodconfig and verified the
resulting hws_pci.o, hws_video.o, and hws.o do not reference
__udivdi3
- v4l2-compliance 1.33.0-5459 from v4l-utils commit
4a0d2c3b4f523406cb9a6f4c541ef14f72f19f3d on /dev/video2:
48 tests succeeded, 0 failed, 1 warning
DV_RX_POWER_PRESENT is intentionally left unsupported in this revision
because current hardware evidence does not expose a validated
receiver-side power-detect signal distinct from active video presence.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604020522.z22eZuW8-lkp@intel.com/
Assisted-by: Codex:gpt-5.5
Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In preparation to adding support for several firmware revisions to be
used for a platform, extract the firmware description data. It
incorporates firmware name, HFI ops and buffer requirements of the
particular firmware build.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Made struct iris_firmware_desc into static consts to pass media CI]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The linux-firmware is providing the vpuNN_pM.mbn firmware for SM8250
since August of 2024. Stop using the legacy firmware name
(vpu-1.0/venus.mbn) and switch to the standard firmware name schema
(vpu/vpu20_p4.mbn).
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Finalize the logical separation of the software and hardware interface
descriptions by moving hardware properties to the files specific to the
particular VPU version.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Having firmware-related fields in platform data results in the tying
platform data to the HFI firmware data rather than the actual hardware.
For example, SM8450 uses Gen2 firmware, so currently its platform data
should be placed next to the other gen2 platforms, although it has the
VPU2.0 core, similar to the one found on SM8250 and SC7280 and so the
hardware-specific platform data is also close to those devices.
Split firmware data to a separate struct, separating hardware-related
data from the firmware interfaces.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The HW response time is a constant between platforms. Remove it from the
iris_platform_data structure and use it directly.
Suggested-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The get_instance() is a callback tightly connected to the HFI
implementation. Move it into the new iris_hfi_sys_ops structure, merging
all core callbacks into a single vtable.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
There is little point in having two different structures for HFI-related
core ops. Merge both of them into the new iris_hfi_ops structure.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Calling HFI instance-specific ops should not require double indirection
through the core ops. Split instance-specific ops to a separate struct,
keep a pointer to it in struct iris_inst and set it directly in the
get_instance function.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
To note that iris_set_num_comv() is gen2-internal, rename it to
iris_hfi_gen2_set_num_comv() and then stop using hfi_ops indirection to
set session property (like other functions in this file do).
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The set_preset_registers is (currently) common to all supported devices.
Extract it to a iris_vpu_common.c and call it directly from
iris_vpu_power_on(). Later, if any of the devices requires special
handling, it can be sorted out separately.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The PAS ID, the authentication service ID, used by the Iris is a
constant and it is not expected to change anytime. Drop it from the
platform data and use the constant instead.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
With the Iris and Venus driver having more or less feature parity for
"HFI 6xx" platforms and with Iris gaining support for SC7280, flip the
switch. Use Iris by default for SM8250 and SC7280, the platforms which
are supported by both drivers, and use Venus only if Iris is not
compiled at all. Use IS_ENABLED to strip out the code and data
structures which are used by the disabled platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Moved two conditional compats inside of one ifdef for ci]
[bod: Changed IS_V6(core) (0) to ((void)(core), 0) for ci]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 0aeabfa29a9c ("media: venus: core: add sm8250 DT compatible and resource data")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 79865252acb6 ("media: iris: enable video driver probe of SM8250 SoC")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Now as all UBWC configuration bits were migrated to be used or derived
from the global UBWC platform-specific data, drop the unused struct and
field definitions.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The UBWC max_channels spreading is specified in the Iris driver, but it
also can be calculated from the platform UBWC config. Use the platform
UBWC configuration instead of specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The UBWC bank spreading is specified both in the Iris driver and in the
platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The UBWC swizzle is specified both in the Iris driver and in the
platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The highest_bank_bit param is specified both in the Iris driver and in
the platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
The min_acc length can be calculated from the platform UBWC
configuration. Use the freshly introduced helper and calculate min_acc
length based on the platform UBWC configuration instead of specifying it
directly in the source.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Specifying UBWC data in each driver doesn't scale and is prone to
errors. Request UBWC data from the central database in preparation to
using it through the rest of the driver.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID gen3 by separating VC and port. Fix to VC zero as a
bugfix we will look to properly populate the VC field with follow on
patches later.
Fixes: d96fe1808dcc ("media: qcom: camss: Add CSID 780 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID gen2 by separating VC and port. Fix to VC zero as a
bugfix we will look to properly populate the VC field with follow on
patches later.
Fixes: 729fc005c8e2 ("media: qcom: camss: Split testgen, RDI and RX for CSID 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID 340 by separating VC and port. Fix to VC zero as a bugfix
we will look to properly populate the VC field with follow on patches
later.
Fixes: f0fc808a466a ("media: qcom: camss: Add CSID 340 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix streaming to RDI1 and RDI2. csid->phy.en_vc contains a bitmask of
enabled CSID ports not virtual channels.
We cycle through the number of available CSID ports and test this value
against the vc_en bitmask.
We then use the passed value both as an index to the port configuration
macros and as a virtual channel index.
This is a very broken pattern. Reviewing the initial introduction of VC
support it states that you can only map one CSID to one VFE. This is true
however each CSID has multiple sources which can sink inside of the VFE -
for example there is a "pixel" path for bayer stats which sources @
CSID(x):3 and sinks on VFE(x):pix.
That is CSID port # 3 should drive VFE port #3. With our current setup only
a sensor which drives virtual channel number #3 could possibly enable that
setup.
This is deeply wrong the virtual channel has no relevance to hooking CSID
to VFE, a fact that is proven after this patch is applied allowing
RDI0,RDI1 and RDI2 to function with VC0 whereas before only RDI1 worked.
Another way the current model breaks is the DT field. A sensor driving
different data-types on the same VC would not be able to separate the VC:DT
pair to separate RDI outputs, thus breaking another feature of VCs in the
MIPI data-stream.
Default the VC back to zero. A follow on series will implement subdev
streams to actually enable VCs without breaking CSID source to VFE sink.
Fixes: 253314b20408 ("media: qcom: camss: Add CSID 680 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Split the VFE bytes-per-line (BPL) alignment logic into separate
helpers for RDI and PIX paths. RDI is usually aligned on RDI write
engine bus constraint such as 64-bit or 128-bit. But PIX engine
is usually (at least on platform I looked at) based on pixel format.
On CAMSS_2290, PIX BPL alignment is set to 0 to indicate that the
alignment must be derived from the pixel format. This allows the
pipeline to use camss_format_get_bpl_alignment().
For other platforms, retain the legacy PIX default (16 bytes), until
PIX is properly tested/enabled.
A future improvement would be to remove platform-specific conditionals
from the VFE code and move the alignment requirements into the
per-platform VFE resource data.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Fixed straggling newlines]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
rounding
Bytes-per-line (BPL) alignment in CAMSS currently uses ALIGN(), which
only works correctly for power-of-two values. Some RAW Bayer packing
formats (e.g. RAW10/12/14) require non-power-of-two alignment such as
3, 5, or 7-byte multiples, so ALIGN() produces incorrect results.
Introduce the use of roundup() with the per-format alignment returned by
camss_format_get_bpl_alignment() when no hardware alignment is enforced
(video->bpl_alignment).
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add camss_format_get_bpl_alignment(), a helper that returns the
bytes-per-line (BPL) alignment requirement for a given CAMSS format.
Different RAW Bayer packing schemes impose different BPL alignment
constraints (e.g. RAW10 requires multiples of 5 bytes, RAW12 multiples of
3 bytes, RAW14 multiples of 7 bytes, etc.). Centralizing this logic
makes the alignment rules explicit and avoids duplicating them across
the pipeline.
This will allow PIX paths and buffer preparation code to correctly
round up BPL values to hardware-required boundaries.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add a debug trace to video_check_format() to log both the subdev-reported
format and the format requested by the video node. This makes it easier
to diagnose mismatches between subdev output and the negotiated V4L2
pixel format, as well as issues related to plane count, resolution, or
field settings.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
VFE lite hardware does not provide a functional PIX path, but after
the per sub-device type resource changes the PIX subdev name is still
assigned unconditionally.
Only assign the PIX subdev name on non-lite VFE variants to avoid
exposing a misleading device name.
Fixes: ae44829a4a97 ("media: qcom: camss: Add per sub-device type resources")
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add support for TPG found on LeMans, Monaco, Hamoa.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Dell Inpsiron14p
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
TPG is connected to the csid as an entity, the link
needs to be adapted.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Dell Inpsiron14p
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Introduce a new common Test Pattern Generator (TPG) implementation for
Qualcomm CAMSS. This module provides a generic interface for pattern
generation that can be reused by multiple platforms.
Unlike CSID-integrated TPG, this TPG acts as a standalone block
that emulates both CSIPHY and sensor behavior, enabling flexible test
patterns without external hardware.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Dell Inpsiron14p
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add the necessary support for CAMSS on the SM6350 SoC.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
clang-22 warns about csiphy_match_clock_name() taking a variable format
string that is not checked against the 'int index' argument:
drivers/media/platform/qcom/camss/camss-csiphy.c:566:44: error: diagnostic behavior may be improved by
adding the 'format(printf, 2, 3)' attribute to the declaration of 'csiphy_match_clock_name'
[-Werror,-Wmissing-format-attribute]
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| __attribute__((format(printf, 2, 3)))
562 | int index)
563 | {
564 | char name[16]; /* csiphyXXX_timer\0 */
565 |
566 | snprintf(name, sizeof(name), format, index);
| ^
drivers/media/platform/qcom/camss/camss-csiphy.c:561:13: note: 'csiphy_match_clock_name' declared here
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| ^
Change the function to use a snprintf() style format string that allows this
to be checked at the call site.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Add missing required clocks (cpas_ahb and camnoc_axi) for VFE lite
instances on sa8775p platform. These clocks are necessary for proper
VFE lite operation:
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Fixes: e7b59e1d06fb ("media: qcom: camss: Add support for VFE 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix the mismatch between clock list and clock rate table for CSID lite
instances. The current implementation has 5 clocks defined but only 2
are actually needed (vfe_lite_csid and vfe_lite_cphy_rx), while the
clock rate table doesn't match this configuration.
Update both clock list and rate table to maintain consistency:
- Remove unused clocks: cpas_vfe_lite, vfe_lite_ahb, vfe_lite
- Update clock rate table to match the remaining two clocks
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Fix BUF_DONE_IRQ_STATUS_RDI_OFFSET calculation for csid lite on
sa8775p platform. The offset should be 0 for csid lite on sa8775p,
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
|
|
Some camera modules have XU controls that can configure the behaviour of
the privacy LED.
Block mapping of those controls, unless the module is configured with
a new parameter: allow_privacy_override.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[johannes.goede@oss.qualcomm.com: Remove deprecation warning from param]
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The UVCIOC_CTRL_MAP lets userspace create a mapping for a custom
control.
This mapping is usually created by the uvcdynctrl userspace utility. We
would like to get the mappings into the driver instead.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The uvcdynctrl tool from libwebcam:
https://sourceforge.net/projects/libwebcam/
maps proprietary controls into v4l2 controls using the UVCIOC_CTRL_MAP
ioctl.
The tool has not been updated for 10+ years now, and there is no reason
for the UVC driver to not do the mapping by itself.
This patch adds the mappings from the uvcdynctrl into the driver. Hopefully
this effort can help in deprecating the UVCIOC_CTRL_MAP ioctl.
Some background about UVCIOC_CTRL_MAP (thanks Laurent for the context):
```
this was envisioned as the base of a vibrant ecosystem where a large
number of vendors would submit XML files that describe their XU control
mappings, at a pace faster than could be supported by adding XU mappings
to the driver. This vision failed to materialize and the tool has not
been updated for 10+ years now. There is no reason to believe the
situation will change.
```
During the porting, the following mappings where NOT imported because
they were not using standard v4l2 IDs. It is recommended that userspace
moves to UVCIOC_CTRL_QUERY for non standard controls.
{
.id = V4L2_CID_FLASH_MODE,
.entity = UVC_GUID_SIS_LED_HW_CONTROL,
.selector = 4,
.size = 4,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0x3,
.menu_mapping = { 0x20, 0x22 },
.menu_names = { "Off", "On" },
},
{
.id = V4L2_CID_FLASH_FREQUENCY,
.entity = UVC_GUID_SIS_LED_HW_CONTROL,
.selector = 4,
.size = 8,
.offset = 16,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_LED1_MODE,
.entity = UVC_GUID_LOGITECH_USER_HW_CONTROL_V1,
.selector = 1,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0xF,
.menu_mapping = { 0, 1, 2, 3 },
.menu_names = { "Off", "On", "Blinking", "Auto" },
},
{
.id = V4L2_CID_LED1_FREQUENCY,
.entity = UVC_GUID_LOGITECH_USER_HW_CONTROL_V1,
.selector = 1,
.size = 8,
.offset = 16,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_DISABLE_PROCESSING,
.entity = UVC_GUID_LOGITECH_VIDEO_PIPE_V1,
.selector = 5,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_BOOLEAN,
.data_type = UVC_CTRL_DATA_TYPE_BOOLEAN,
},
{
.id = V4L2_CID_RAW_BITS_PER_PIXEL,
.entity = UVC_GUID_LOGITECH_VIDEO_PIPE_V1,
.selector = 8,
.size = 8,
.offset = 0,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
{
.id = V4L2_CID_LED1_MODE,
.entity = UVC_GUID_LOGITECH_PERIPHERAL,
.selector = 0x09,
.size = 2,
.offset = 8,
.v4l2_type = V4L2_CTRL_TYPE_MENU,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
.menu_mask = 0xF,
.menu_mapping = { 0, 1, 2, 3 },
.menu_names = { "Off", "On", "Blink", "Auto" },
},
{
.id = V4L2_CID_LED1_FREQUENCY,
.entity = UVC_GUID_LOGITECH_PERIPHERAL,
.selector = 0x09,
.size = 8,
.offset = 24,
.v4l2_type = V4L2_CTRL_TYPE_INTEGER,
.data_type = UVC_CTRL_DATA_TYPE_UNSIGNED,
},
This script has been used to generate the mappings. They were then
reformatted manually to follow the driver style.
import sys
import uuid
import re
import xml.etree.ElementTree as ET
def get_namespace(root):
return re.match(r"\{.*\}", root.tag).group(0)
def get_single_guid(ns, constant):
id = constant.find(ns + "id").text
value = constant.find(ns + "value").text
return (id, value)
def get_constants(ns, root):
out = dict()
for constant in root.iter(ns + "constant"):
attr = constant.attrib
if attr["type"] == "integer":
id, value = get_single_guid(ns, constant)
if id in out:
print(f"dupe constant {id}")
out[id] = value
return out
def get_guids(ns, root):
out = dict()
for constant in root.iter(ns + "constant"):
attr = constant.attrib
if attr["type"] == "guid":
id, value = get_single_guid(ns, constant)
if id in out:
print(f"dupe guid {id}")
out[id] = value
return out
def get_single_control(ns, control):
out = {}
for id in "entity", "selector", "index", "size", "description":
v = control.find(ns + id)
if v is None and id == "description":
continue
out[id] = v.text
reqs = set()
for r in control.find(ns + "requests"):
reqs.add(r.text)
out["requests"] = reqs
return (control.attrib["id"], out)
def get_controls(ns, root):
out = dict()
for control in root.iter(ns + "control"):
id, value = get_single_control(ns, control)
if id in out:
print(f"Dupe control id {id}")
out[id] = value
return out
def get_single_mapping(ns, mapping):
out = {}
out["name"] = mapping.find(ns + "name").text
uvc = mapping.find(ns + "uvc")
for id in "size", "offset", "uvc_type":
out[id] = uvc.find(ns + id).text
out["control_ref"] = uvc.find(ns + "control_ref").attrib["idref"]
v4l2 = mapping.find(ns + "v4l2")
for id in "id", "v4l2_type":
out[id] = v4l2.find(ns + id).text
menu = {}
for entry in v4l2.iter(ns + "menu_entry"):
menu[entry.attrib["name"]] = entry.attrib["value"]
if menu:
out["menu"] = menu
return out
def get_mapping(ns, root):
out = []
for control in root.iter(ns + "mapping"):
mapping = get_single_mapping(ns, control)
out += [mapping]
return out
def print_guids(guids):
for g in guids:
print(f"#define {g} \\")
u_bytes = uuid.UUID(guids[g]).bytes_le
u_bytes = [f"0x{b:02x}" for b in u_bytes]
print("\t{ " + ", ".join(u_bytes) + " }")
def print_flags(flags):
get_range = {"GET_MIN", "GET_DEF", "GET_MAX", "GET_CUR", "GET_RES"}
if get_range.issubset(flags):
flags -= get_range
flags.add("GET_RANGE")
flags = list(flags)
flags.sort()
out = ""
for f in flags[:-1]:
out += f"UVC_CTRL_FLAG_{f}\n\t\t\t\t| "
out += f"UVC_CTRL_FLAG_{flags[-1]}"
return out
def print_description(desc):
print("/*")
for line in desc.strip().splitlines():
print(f" * {line.strip()}")
print("*/")
def print_controls(controls, cons):
for id in controls:
c = controls[id]
if "description" in c:
print_description(c["description"])
print(
f"""\t{{
\t\t.entity\t\t= {c["entity"]},
\t\t.selector\t= {cons[c["selector"]]},
\t\t.index\t\t= {c["index"]},
\t\t.size\t\t= {c["size"]},
\t\t.flags\t\t= {print_flags(c["requests"])},
\t}},"""
)
def menu_mapping_txt(menu):
out = f"\n\t\t.menu_mask\t= 0x{((1<<len(menu))-1):X},\n"
out += f"\t\t.menu_mapping\t= {{ {", ".join(menu.values())} }},\n"
out += f"\t\t.menu_names\t= {{ \"{"\", \"".join(menu.keys())}\" }},\n"
return out
def print_mappings(mappings, controls, cons):
for m in mappings:
c = controls[m["control_ref"]]
if "menu" in m:
menu_mapping = menu_mapping_txt(m["menu"])
else:
menu_mapping = ""
print(
f"""\t{{
\t\t.id\t\t= {m["id"]},
\t\t.entity\t\t= {c["entity"]},
\t\t.selector\t= {cons[c["selector"]]},
\t\t.size\t\t= {m["size"]},
\t\t.offset\t\t= {m["offset"]},
\t\t.v4l2_type\t= {m["v4l2_type"]},
\t\t.data_type\t= {m["uvc_type"]},{menu_mapping}
\t}},"""
)
def print_code(guids, cons, controls, mappings):
used_controls = set()
for m in mappings:
used_controls.add(m["control_ref"])
used_guids = set()
for c in used_controls:
used_guids.add(controls[c]["entity"])
print("\n######GUIDs#######\n")
print_guids({id: guids[id] for id in guids if id in used_guids})
print("\n######CONTROLS#######\n")
print_controls({id: controls[id] for id in controls if id in used_controls}, cons)
print("\n######MAPPINGS#######\n")
print_mappings(mappings, controls, cons)
# print(guids)
# print(used_controls)
root = ET.fromstring(sys.stdin.read())
ns = get_namespace(root)
cons = get_constants(ns, root)
guids = get_guids(ns, root)
controls = get_controls(ns, root)
mappings = get_mapping(ns, root)
print_code(guids, cons, controls, mappings)
Cc: Manav Gautama <bandwidthcrunch@gmail.com>
Cc: Martin Rubli <martin_rubli@logitech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In UVC, the FID flips with every frame. For every FID flip, we increase
the stream sequence number.
Now, if a FID flips multiple times and there is no data transferred between
the flips, the buffer sequence number will be set to the value of the
stream sequence number after the first flip.
Userspace uses the buffer sequence number to determine if there have been
missing frames. With the current behaviour, userspace will think that the
gap is in the wrong location.
This patch modifies uvc_video_decode_start() to provide the correct buffer
sequence number and timestamp.
Cc: stable@kernel.org
Fixes: 650b95feee35 ("[media] uvcvideo: Generate discontinuous sequence numbers when frames are lost")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
If the driver could not detect the EOF, the sequence number is increased
twice:
1) When we enter uvc_video_decode_start() with the old buffer and FID has
flipped => We return -EAGAIN and last_fid is not flipped
2) When we enter uvc_video_decode_start() with the new buffer.
Fix this issue by moving the new frame detection logic earlier in
uvc_video_decode_start().
This also has some nice side affects:
- The error status from the new packet will no longer get propagated
to the previous frame-buffer.
- uvc_video_clock_decode() will no longer update the previous frame
buf->stf with info from the new packet.
- uvc_video_clock_decode() and uvc_video_stats_decode() will no longer
get called twice for the same packet.
Cc: stable@kernel.org
Fixes: 650b95feee35 ("[media] uvcvideo: Generate discontinuous sequence numbers when frames are lost")
Reported-by: Hans de Goede <hansg@kernel.org>
Closes: https://lore.kernel.org/linux-media/CANiDSCuj4cPuB5_v2xyvAagA5FjoN8V5scXiFFOeD3aKDMqkCg@mail.gmail.com/T/#me39fb134e8c2c085567a31548c3403eb639625e4
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
|
|
Disable access to routes when the STREAMS client capability bit isn't set.
Routes aren't relevant otherwise anyway.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Refactor returning the routes by adding a new function that essentially
does a memcopy and sets the number of the routes in the routing table.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
