| Age | Commit message (Collapse) | Author |
|---|
|
Set the device's runtime PM status and enable runtime PM before registering
the async sub-device. This is needed to avoid the case where the device is
runtime PM resumed while runtime PM has not been enabled yet.
Remove the related, non-driver-specific comment while at it.
Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The sub-device state lock has been already acquired when ccs_init_state()
is called. Do not try to acquire it again.
Reported-by: David Heidelberg <david@ixit.cz>
Fixes: a88883d1209c ("media: ccs: Rely on sub-device state locking")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Recent cleanup introduced a bug in the error path of
uvc_alloc_urb_buffers(). If there is not enough memory for the
allocation the following error will be triggered:
[ 739.196672] UBSAN: shift-out-of-bounds in mm/page_alloc.c:1403:22
[ 739.196710] shift exponent 52 is too large for 32-bit type 'int'
Resulting in:
[ 740.464422] BUG: unable to handle page fault for address: fffffac1c0800000
The reason for the bug is that usb_free_noncoherent is called with an
invalid size (0) instead of the actual size of the urb.
This patch takes care of that.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/linux-media/abycbXzYupZpGkvR@hyeyoo/T/#t
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: c824345288d1 ("media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260320-uvc-urb-free-error-v1-1-b12cc3762a19@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the t4ka3 driver from:
https://github.com/kitakar5525/surface3-atomisp-cameras.git
With many cleanups / changes (almost a full rewrite) to make it suitable
for upstream:
* Remove the VCM and VCM-OTP support, the mainline kernel models VCMs and
calibration data eeproms as separate v4l2-subdev-s.
* Remove the integration-factor t4ka3_get_intg_factor() support and IOCTL,
this provided info to userspace through an atomisp private IOCTL.
* Turn atomisp specific exposure/gain IOCTL into standard v4l2 controls.
* Use normal ACPI power-management in combination with runtime-pm support
instead of atomisp specific GMIN power-management code.
* Turn into a standard V4L2 sensor driver using
v4l2_async_register_subdev_sensor().
* Add vblank, hblank, and link-freq controls; drop get_frame_interval().
* Use CCI register helpers.
* Calculate values for modes instead of using fixed register-value lists,
allowing arbritrary modes.
* Add get_selection() and set_selection() support
* Add a CSI2 bus configuration check
This was tested on a Xiaomi Mipad2 tablet which has a T4KA3 sensor with
DW9761 VCM as back sensor.
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a V4L2 subdevice driver for the Omnivision OV2732 sensor.
The OV2732 is a 1/4" color CMOS 1080p (1920x1080) HD image sensor with
programmable controls like: gain, exposure, frame rate, image and windowing
size, horizontal mirror, vertical flip, cropping.
Signed-off-by: Walter Werner Schneider <contact@schnwalter.eu>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
[Sakari Ailus: Squashed Walter's fixup.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Defer probe if endpoint is not yet available. And do it before acquiring
clock, gpio and regulators.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Initialized and left to themselves some boards with analog inputs,
on some modern platforms can throw critical errors which prevents
even digital from working thereafter. If analog is never used this
module parameter allows analog to be disabled on a card by card
basis.
It is already possible to disable analog audio.
For example, to disable for Hauppauge QuadHD with analog functionality:
options cx23885 disable_analog_video=56,57
can be placed insode of /etc/modprobe.d/cx23885.conf
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
dvb_crc32() does exactly the same computation as the crc32_be() library
function. Just call crc32_be() instead.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Same as 461v2, but uses Montage ds3103c instead of ds3103b
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Hauppauge 416e products have moved to using the 3103C satellite
demod. This demod behaves mostly like a 3103b, but has
different initialization, clocking, and lock operations.
This Linux code was reverse egineered entirely
using a Windows reference driver.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix a few minor checkpatch issues]
[hverkuil: fixed two minor sparse issues]
|
|
The Hauppauge HVR-935, HVR-955, and HVR-975 have moved
from cx231xx bridge to em2828x bridge.
The following USB device id's are new:
2040:0360 - HVR-935 ISOC transport
2040:8360 - HVR-935 Bulk transport
2040:0366 - HVR-955 ISOC transport
2040:8366 - HVR-955 Bulk transport
2040:036a - HVR-975 ISOC transport
2040:836a - HVR-975 Bulk transport
The devices all now utilize si2177 tuner. Capabilities are:
- Digital TV
- Composite video input
- S-Video input
- Analog stereo input
HVR-935 has DVB-C/T/T2 demod (si2168).
HVR-955 has ATSC/QAM demod (lgdt3306a).
HVR-975 has both ATSC/QAM and DVB-C/T/T2 demods.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: a few minor checkpatch fixes]
|
|
The si2177 is very closely related to si2157, with slight differences
when doing analog operations. Digital is left as is, but analog needs
to be configured specially because the signal is internally demodulated
and CVBS video is output directly from the tuner.
Verified locked and working with all supported standards.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix em28xx driver to accommodate a device with two i2c client demods.
The em28xx driver already had a multi frontend aware device struct,
with two fe, just not two i2c client demods. Since Hauppauge HVR975
has transitioned from cx231xx to em2828X, this is required for full
functionality of the devices.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When the driver was converted to VB2 the original function to fix
green frame detection was removed and a default vb2 dqbuf function
was used instead. This vb2 dqbuf function leads to green frames not
being detected and correupting stream captures.
The vidioc_dqbuf function checks the greenscreen flag, and, if set
resets the stream to discard the green frame and decode a real frame.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
New revision of Hauppauge USB Live2 switches from cx231xx usb bridge
to Empia em2828X bridge. Inputs for the USB Live2 remain the same:
- Composite video
- S-Video
- Analog stereo audio
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The empia em2828X usb bridge contains previous functionality,
but also contains an embedded video decoder. The implemented
capabilities include composite and s-video inputs, as well as
analog TV. Analog TV is expected in CVBS format, it must be
demodulated already.
Media controller decoder entity is included so pipeline
verification passes and graph is properly constructed.
Analog TV bits based off cx231xx driver.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix a few minor checkpatch issues]
|
|
The state initialization function vsp1_entity_init_state() incorrectly
leaves the last entity pad out when initializing formats due to an off
by one error. Fix it.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-14-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The V4L2 API requires drivers that expose controls to implement control
notification events. This is enforced by v4l2-compliance. Add event
handling to the VSP1 entities that create controls to fix the compliance
failures.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-13-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram .set_fmt() handler suffers from two problems:
- When operating on the source pad, it returns correct information to
userspace, but does not store the format in the subdev state.
Subsequent calls to .get_fmt(), handled by the
vsp1_subdev_get_pad_format() helper, will not return the correct
information.
- When operating on the sink pad, it uses the
vsp1_subdev_set_pad_format(), which propagates the sink format to the
source, incorrectly overwriting the fixed source format.
The first issue could be fixed by implementing the set format operation
with vsp1_subdev_get_pad_format() on the source pad, if it wasn't that
.set_fmt() is also used to initialize the subdev state in
vsp1_entity_init_state(). The histogram would need a custom
.init_state() handler.
As the second issue would anyway overwrite the format, and therefore
requires a custom .set_fmt() implementation, fix both issues without
using the helpers.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-12-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram supports size enumeration on the sink pad only, as the
source pad outputs a metadata format. The correct error code when
enumeration is not supported is -ENOTTY, not -EINVAL. Fix it.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-11-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram media bus code enumeration does not check the index when
operating on the source pad, resulting in an infinite loop if userspace
keeps enumerating code without any loop boundary. Fix it by returning an
error for indices larger than 0 as the pad supports a single format.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-10-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The HSIT entity performs format conversion, which leads to incorrect
results with the vsp1_subdev_enum_frame_size() helper. Implement a
custom .enum_frame_size() handler that correctly validates the media bus
code. Size validation is identical to the helper.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-9-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The format width and height is never propagated to the BRX source pad,
leaving its initial configuration invalid. Propagate the whole format
from the first sink pad to the source pad instead of only propagating
the media bus code. This fixes compliance with the subdev format
propagation rules.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-8-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RWPF can't freely convert between all input and output formats. They
support RGB <-> YUV conversion, but HSV formats can't be converted. Fix
the media bus code and frame size enumeration to take this into account
on the source pad.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-7-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vsp1 driver doesn't enforce a minimum value on the RPF crop rectangle
width and height. Empty rectangles are accepted, leading to incorrect
hardware behaviour. Fix it by adding minimum width and height
constraints to the value clamping.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-6-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RPF doesn't enforces the alignment constraint on the sink pad
format, which could have an odd size, possibly down to 1x1. In that
case, the upper bounds for the left and top coordinates clamping would
become negative, cast to a very large positive value. Incorrect crop
rectangle coordinates would then be incorrectly accepted.
A second issue can occur when the requested left and top coordinates are
negative. They are cast to a large unsigned value, clamped to the
maximum. While the calculation will produce valid values for the
hardware, this is not compliant with the V4L2 specification that
requires values to be adjusted to the closest valid value.
Fix both issues by switching to signed clamping, with an explicit
minimum to adjust negative values, and adjusting the clamp bounds to
avoid negative upper bounds.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The media bus code passed to the .enum_frame_size() operation for the
sink pad is required to be supported by the device, but not to match the
current format. All entities that use the vsp1_subdev_enum_frame_size()
helper, as well as the SRU and UDS entities that implement the operation
manually, perform the check incorrectly.
Fix the issue by implementing the correct code check in the
vsp1_subdev_enum_frame_size(). For the SRU and UDS, to avoid duplicating
code, use the vsp1_subdev_enum_frame_size() as a base and override the
enumerated size on the source pad with entity-specific constraints.
While at it, include the missing <linux/mutex.h> as the code locks
mutexes.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Most entities use the vsp1_subdev_enum_frame_size() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the minimum and
maximum sizes supported by the entity as arguments, requiring each
entity to implement a wrapper.
Replace the function arguments with storing the size limits in the
vsp1_entity structure. This allows dropping most of the
.enum_frame_size() and .set_fmt() wrappers in entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Most entities use the vsp1_subdev_enum_mbus_code() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the list of
supported media bus codes as arguments, requiring each entity to
implement a wrapper.
Replace the function arguments with storing the supported media bus
codes in the vsp1_entity structure. This allows dropping most of the
.enum_mbus_code() wrappers from entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for the P010 (10-bit Y/UV 4:2:0) pixel format to the
uvcvideo driver. This format is exposed by USB capture devices such as
the Magewell USB Capture HDMI 4K Pro when capturing HDR10 content.
P010 stores 10-bit Y and interleaved UV samples in 16-bit little-endian
words, with data in the upper 10 bits and zeros in the lower 6 bits.
This requires 2 bytes per sample, so bytesperline is wWidth * 2.
V4L2_PIX_FMT_P010 was added to the V4L2 core in commit 5374d8fb75f3
("media: Add P010 video format").
Based on the community DKMS patch from awawa-dev/P010_for_V4L2.
Link: https://github.com/awawa-dev/P010_for_V4L2
Signed-off-by: Oliver Collyer <ovcollyer@mac.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251226065718.95504-1-ovcollyer@mac.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for Intel RealSense D436 and D555 depth cameras metadata.
These cameras use the D4XX metadata format for transmitting depth and
sensor information.
The D555 camera uses UVC protocol version 1.5, while the D436 uses
an undefined protocol version. Both cameras require the D4XX metadata
format flag to properly handle their metadata streams.
Signed-off-by: Yogev Modlin <yogev.modlin@realsenseai.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251026-fix-uvc-v4-2-610eb1329600@realsenseai.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
RealSense branding is now independent of Intel. Update all driver
comments referencing "Intel" to "Intel RealSense" to reflect
current ownership. No code logic changes.
Signed-off-by: Yogev Modlin <yogev.modlin@realsenseai.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251026-fix-uvc-v4-1-610eb1329600@realsenseai.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
It is less prone to errors if we add a backpointer to stream from
struct uvc_video_queue.
Refactor the code.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260318202352.1374443-1-ribalda@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now we have the metadata size hardcoded to 10 KiB, this is a value that
works fine for bulk cameras or frames with no extra metadata. But not
for all usecases.
We have seen some cameras that produce more metadata per frame. Eg:
Frame 1 captured (Bytes: 11154)
Frame 2 captured (Bytes: 11616)
Frame 3 captured (Bytes: 11374)
Frame 4 captured (Bytes: 11132)
Frame 5 captured (Bytes: 11594)
Frame 6 captured (Bytes: 11352)
Frame 7 captured (Bytes: 11110)
Frame 8 captured (Bytes: 11572)
Frame 9 captured (Bytes: 11308)
When this happens, the driver (correctly) marks the metadata as ERROR.
This patch let userspace set bigger buffersize via S_FMT.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-3-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The stream data structure has two queues: the metadata and the data
queues, but uvc_queue_to_stream() only supports the data queue. If we
pass the metadata queue the function will return an invalid pointer.
This patch add a parameter to the function to explicitly tell the
function which queue are we using.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-2-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The UVC driver has two video streams, one for the frames and another one
for the metadata. Both streams share most of the codebase, but only the
data stream declares support for DMABUF transfer mode.
I have tried the DMABUF transfer mode with CONFIG_DMABUF_HEAPS_SYSTEM
and the frames looked correct.
This patch announces the support for DMABUF for the metadata stream.
This is useful for apps/HALs that only want to support DMABUF.
Cc: stable@vger.kernel.org
Fixes: 088ead2552458 ("media: uvcvideo: Add a metadata device node")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-1-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The CSI-2 receiver in i.MX8ULP is almost same as i.MX8QXP/QM except
clocks and resets, so add compatible string for i.MX8ULP to handle
the difference and reuse platform data of i.MX8QXP/QM.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-4-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Call reset_control_deassert() to explicitly release reset to make sure
reset bits are cleared since platform like i.MX8ULP can't clear reset
bits automatically.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-3-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use devm_clk_bulk_get_all() helper to simplify clock handle code.
No functional changes intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-2-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ISI module on i.MX95 supports up to eight channels and four link
sources to obtain the image data for processing in its pipelines. It
can process up to eight image sources at the same time.
Add ISI basic functions support for i.MX95.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-3-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The field BLANK_PXL provides the value of the blank pixel to be inserted
in the image in case an overflow error occurs in the output buffers of
the channel. Its default value is 0xff, so no need to set again.
Besides, the field only exist in i.MX8QM/XP ISI version. Other versions
like i.MX 8M series, remove the field since it won't send data to AXI bus
when overflow error occurs and mark BLANK_PXL as reserved. i.MX9 series
use it for other purposes.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-2-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix a hang issue when capturing a single frame with applications like cam
in libcamera. It would hang waiting for the driver to complete the buffer,
but streaming never starts because min_queued_buffers was set to 2.
The ISI module uses a ping-pong buffer mechanism that requires two buffers
to be programmed at all times. However, when fewer than 2 user buffers are
available, the driver use internal discard buffers to fill the remaining
slot(s). Reduce minimum queued buffers from 2 to 0 allows streaming to
start without any queued buffers.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260312-isi_min_buffers-v2-1-d5ea1c79ad81@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The dw100_start() function is only called from dw100_device_run(). As
both functions are not too big, move the code directly into
dw100_device_run() and drop dw100_start() to improve readability.
This patch contains no functional changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-4-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On kernels with PREEMPT_RT enabled, a "BUG: scheduling while atomic"
kernel oops occurs inside dw100_irq_handler -> vb2_buffer_done. This is
because vb2_buffer_done takes a spinlock which is not allowed within
interrupt context on PREEMPT_RT.
The first attempt to fix this was to just drop the IRQF_ONESHOT so that
the interrupt is handled threaded on PREEMPT_RT systems. This introduced
a new issue. The dw100 has an internal timeout counter that is gated by
the DW100_BUS_CTRL_AXI_MASTER_ENABLE bit. Depending on the time it takes
for the threaded handler to run and the geometry of the data being
processed it is possible to reach the timeout resulting in
DW100_INTERRUPT_STATUS_INT_ERR_TIME_OUT being set and "dw100
32e30000.dwe: Interrupt error: 0x1" errors in dmesg.
To properly fix that, split the interrupt into two halves, reset the
DW100_BUS_CTRL_AXI_MASTER_ENABLE bit in the hard interrupt handler and
do the v4l2 buffer handling in the threaded half. The IRQF_ONESHOT can
still be dropped as the interrupt gets disabled in the hard handler and
will only be reenabled on the next dw100_device_run which will not be
called before the current job has finished.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-3-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement dynamic vertex map updates by handling the
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP control during streaming. This
allows to implement features like dynamic zoom, pan, rotate and dewarp.
To stay compatible with the old version, updates of
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP are ignored during streaming
when requests are not used. Print a corresponding warning once.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-2-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The dw100 dewarper hardware present on the NXP i.MX8MP allows very
flexible dewarping using a freely configurable vertex map. Aside from
lens dewarping the vertex map can be used to implement things like
arbitrary zoom, pan and rotation. The current driver supports setting
that vertex map before calling VIDIOC_STREAMON.
To control above mentioned features during streaming it is necessary to
update the vertex map dynamically. To do that in a race free manner V4L2
requests support is required. Add V4L2 requests support to prepare for
dynamic vertex map updates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-1-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add dev_err_probe() to all error branches in the *async_register() helpers
to provide clearer diagnostic information when device registration fails.
Drop the explicit error message after returning from
mipi_csis_async_register(), as the error is already reported by this
helper.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260121-cam_cleanup-v5-1-01d1ab38db9d@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Reject unsupported pixel formats in rkisp1_enum_framesizes() to
fix v4l2-compliance failure.
v4l2-compliance test failure:
fail: ../utils/v4l2-compliance/v4l2-test-formats.cpp(403): Accepted framesize for invalid format
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
Tested on: Debix i.MX8MP Model A
Kernel version: v6.17-rc3
v4l2-compliance: 1.31.0-5387
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://patch.msgid.link/20250829101425.95442-1-tarang.raval@siliconsignals.io
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Scheduling of work items with an async workqueue opens the door to
potential races between multiple instances of a work item.
While the frame transfer function is now protected against races, using
a workqueue doesn't provide much benefit considering the limited cost of
creating a job transfer.
Replace the usage of the work queue with direct function calls.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The scheduling of a new buffer transfer in the IVC driver is triggered
by two occurrences of the "frame completed" interrupt.
The first interrupt occurrence identifies when all image data have been
transferred to the ISP, the second occurrence identifies when the
post-transfer VBLANK has completed and a new buffer can be transferred.
Under heavy system load conditions the actual execution of the workqueue
item might be delayed and two items might happen to run concurrently,
leading to a new frame transfer being triggered while the previous one
has not yet finished.
This error condition is only visible because the driver maintains a
status variable that counts the number of interrupts since the last
transfer, and warns in case an IRQ happens before the counter has been
reset.
To ensure sequential execution of the worqueue items and avoid a double
buffer transfer to run concurrently, protect the whole function body
with the spinlock that so far was solely used to reset the counter and
inspect the interrupt counter variable at the beginning of the buffer
transfer function.
As soon as the ongoing transfer completes, the workqueue item will be
re-scheduled and will consume the pending buffer.
Cc: stable@vger.kernel.org
Fixes: f0b3984d821b ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
