| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
|
|
Backmerge to pull in commit 838d852da850 ("rust: allow
`clippy::collapsible_match` globally"), in order to get rid of spurious
warnings messing with developer tooling.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling in gpio-mxc
- fix scoped_guard() usage in gpio-adnp
- don't accept partial writes in gpio-virtuser debugfs interface as
they can't really work correctly
- fix resource leaks in gpio-rockchip
- fix locking issues in remove path in shared GPIO management
- undo the vote of a GPIO shared proxy virtual device on GPIO release
* tag 'gpio-fixes-for-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: rockchip: teardown bugs and resource leaks
gpio: rockchip: convert bank->clk to devm_clk_get_enabled()
gpio: virtuser: Fix uninitialized data bug in gpio_virtuser_direction_do_write()
gpio: shared: fix lockdep false positive by removing unneeded lock
gpio: shared: fix deadlock on shared proxy's parent removal
gpio: adnp: fix flow control regression caused by scoped_guard()
gpio: shared: undo the vote of the proxy on GPIO free
gpio: mxc: fix irq_high handling
|
|
The RK3588 Video Capture (VICAP) unit features a Digital Video Port (DVP)
and six MIPI CSI-2 capture interfaces. Add initial support for this variant
to the rkcif driver and enable the MIPI CSI-2 capture interfaces.
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
rsu_send_msg() can return -ETIMEDOUT when
wait_for_completion_interruptible_timeout() fires while the SMC call is still
pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION,
COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE
call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then
fall through and queue the next request on the same channel. The next svc
kthread that runs will dereference pdata->chan->scl in its receive callback
path, triggering a NULL pointer dereference identical to the one fixed by
commit c45f7263100c ("firmware: stratix10-rsu: Fix NULL pointer dereference
when RSU is disabled") for the COMMAND_RSU_STATUS path.
Apply the same cleanup pattern to the remaining failure paths: remove the
async client, free the channel, and return early so no further messages are
queued on a channel whose scl has been cleared.
While at it, clean up stratix10_rsu_probe() in two ways without changing
behavior:
- Drop redundant zero-initialization of fields already cleared by
devm_kzalloc(): client.receive_cb, status.* and spt0/1_address
(INVALID_SPT_ADDRESS is 0x0).
- Replace five identical 3-line error-cleanup blocks
(stratix10_svc_remove_async_client() + stratix10_svc_free_channel() +
return ret) with goto labels (remove_async_client, free_channel),
matching the standard kernel resource-unwinding pattern and making it
easier to extend the probe sequence without forgetting matching
cleanup.
Also move init_completion() next to mutex_init() so sync-primitive
initialization is grouped before anything that could trigger a
callback.
Fixes: 15847537b623 ("firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.")
Cc: stable@kernel.org
Assisted-by: Claude:claude-4.7-opus-high Cursor
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a
centralize exit for all the rsu_send_async_msg() and rsu_send_msg().
|
|
When the ATF version is too old to support SIP SVC v3 asynchronous
operations (e.g. ATF 2.5), stratix10_svc_async_init() returns
-EOPNOTSUPP. The probe function currently treats any non-zero return
as fatal and aborts, logging:
stratix10-svc firmware:svc: Intel Service Layer Driver: ATF version \
is not compatible for async operation
stratix10-svc firmware:svc: probe with driver stratix10-svc failed \
with error -95
This prevents the SVC driver from loading entirely, causing all
dependent client drivers (hwmon, RSU, FCS) to also fail to probe even
though they can operate correctly via the synchronous V1 SMC path.
Fix this by treating -EOPNOTSUPP from stratix10_svc_async_init() as a
non-fatal degraded condition. The driver loads in sync-only mode and
logs:
stratix10-svc firmware:svc: Intel Service Layer Driver Initialized \
(sync-only mode)
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add a 'supported' flag to struct stratix10_async_ctrl to indicate
whether the secure firmware supports SIP SVC v3 asynchronous
communication. When the ATF version check in stratix10_svc_async_init()
fails, set supported=false and return -EOPNOTSUPP instead of -EINVAL.
This allows callers to distinguish between "async not supported by this
ATF version" (-EOPNOTSUPP) and "programming error / bad argument"
(-EINVAL), and take appropriate action (e.g. fall back to synchronous
V1 SMC path) rather than treating both as fatal.
Also update stratix10_svc_add_async_client() to return -EOPNOTSUPP
immediately when async is not supported, rather than -EINVAL from the
!actrl->initialized check, so client drivers receive a consistent and
meaningful error code.
This patch is a prerequisite for the following fix and must be applied
together with it to correctly restore functionality on old ATF versions.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Suggested-by: Anders Hedlund <anders.hedlund@windriver.com>
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
media_entity_remote_source_pad_unique()
The media_entity_remote_source_pad_unique() function returns an error
pointer on failure, not NULL. Fix the check to use IS_ERR() and return
PTR_ERR() to correctly handle allocation failures.
Fixes: 982135c0eac6 ("media: ti: j721e-csi2rx: add a subdev for the core device")
Fixes: 3ed9c0a1fdba ("media: ti: j721e-csi2rx: add multistream support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Replace open-coded `i--; for (; i >= 0; i--)` patterns with the
idiomatic `while (i--)` in the error unwind paths of
csi_async_notifier_complete() and ti_csi2rx_probe().
Also scope loop variables directly in the for statement instead of
declaring them at the top of the function in ti_csi2rx_suspend(),
ti_csi2rx_resume() and ti_csi2rx_remove(). Change the type to
unsigned int in the first two to match csi->num_ctx.
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
CVS is located between IPU device and sensors and is available in
existing commercial platforms from multiple OEMs. The connection
information between them in firmware is not enough to build a V4L2
connection graph. This patch parses the connection properties from the
SSDB buffer in DSDT and builds the connection using software nodes.
From the IPU bridge point of view, CVS is just like IVSC.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add driver for Intel Computer Vision Sensing (CVS) devices found on
Intel Luna Lake (LNL), Panther Lake (PTL), and Arrow Lake (ARL)
platforms.
The CVS device acts as a V4L2 sub-device bridge that manages CSI-2
link ownership between the host (Linux) and firmware for camera
sensors. It provides:
- Query the device status via sysfs interface
- CSI-2 link ownership arbitration between host and CVS firmware
- MIPI CSI-2 configuration management
- Privacy LED control coordination
- Power management integration with runtime PM
The driver consists of two main components:
core.c: Core driver with probe, command transport, and power management
v4l2.c: V4L2 sub-device and media framework integration
Hardware Interface:
- I2C for command/control communication with device firmware
- GPIO signals for ownership handshaking (request/response)
- Optional reset and wake interrupt for full-capability variants
- Integration with Intel IPU via ipu_bridge
The driver supports two hardware capability levels:
- Light capability: Basic GPIO-based ownership (2 GPIOs)
- Full capability: Enhanced with reset control and wake IRQ (4 GPIOs)
Device-specific quirks are handled via a quirk table to accommodate
variations across different CVS implementations (Lattice, Synaptics).
In addition to I2C-based operation, the driver supports platform
device instantiation for systems where CVS is exposed without I2C
transport, falling back to GPIO-only ownership control.
The CVS driver integrates with the IPU bridge for automatic device
discovery via ACPI on supported platforms.
PCI device IDs for Intel IPU7 (0x645d, shared by MTL and LNL) and
IPU7.5 (0xb05d, shared by ARL and PTL) are included in the
driver-local icvs_pci_tbl lookup table, enabling CVS to locate these
IPU variants without modifying the shared ipu6-pci-table header.
A PM runtime device link is established between IPU (consumer) and CVS
(supplier) so that the PM framework automatically resumes CVS before
IPU begins streaming, triggering cvs_runtime_resume() to claim CSI-2
link ownership. Ownership is released via cvs_runtime_suspend() after
the autosuspend delay.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Now that Nouveau supports GA100 properly, it should no longer require
the NvEnableUnsupportedChipsets parameter in order to enable it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-11-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Nouveau supports Turing and Ampere GPUs with or without GSP-RM.
Support without GSP-RM is mostly academic, since GSP-RM is
needed to run the GPU at full clocks. It is also the default
mode for these GPUs.
GA100 is a special case, however. The current code has some support
for running GA100 without GSP-RM, but several features are missing.
More importantly, some required firmware images like ucode_ahesasc.bin
are not available and would need to be provided by Nvidia.
To prevent Nouveau from even trying to boot on GA100 without GSP-RM,
remove the non-GSP fallback option in the ga100_gsps[] array.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-10-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The GPU's ROM may begin with an Init-from-ROM (IFR) header that precedes
the PCI Expansion ROM images (VBIOS). When present, the PROM shadow
method must parse this header to determine the offset where the PCI ROM
images actually begin, and adjust all subsequent reads accordingly.
On most GPUs this is not needed because either the PRAMIN shadow method
(which reads from VRAM via the display engine) succeeds first, or the IFR
microcode has already applied the ROM offset so that PROM reads
transparently skip the header. However, on GA100 neither of these
applies: GA100 has no display engine (so PRAMIN is unavailable), and the
IFR offset is not applied to PROM reads on this GPU.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-9-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The NV_FUSE_STATUS_OPT_DISPLAY register is used to determine whether
the GPU has display hardware. The current code that normally reads
this register is instead hard-coded to check for GA100 vs later GPUs.
Since this function is called only on pre-Hopper GPUs, and this
if-statement applies only to GA100 and later, the check works
because GA100 is the only non-display Ampere and Ada GPU.
However, there actually is a register that can be read, so we should
use it.
Fixes: a34632482f1e ("drm/nouveau/bios/ga10[024]: initial support")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-8-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When booting with GSP-RM, the FRTS data region normally needs to be
allocated. However, on GA100, this region is not used and so its
size needs to be set to zero.
The truth is that GA100 is just special, and the simplest way to
determine the proper FRTS data region size is to check for this
GPU specifically.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-7-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
On some Nvidia GPUs (i.e. GA100), the FRTS region is not allocated
(its size is set to 0). In such cases, FWSEC-FRTS should not be run.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
On GA100, the row remapper hardware reserves a small amount of DRAM at
the end of framebuffer for spare rows used to repair memory errors at
runtime. When an uncorrectable ECC error is detected in a DRAM row,
the row remapper redirects accesses to a spare row, transparently
repairing the fault.
The LOCAL_MEMORY_RANGE register (0x100ce0) reports the GPU's FB address
range, but its encoding rounds to 1GB boundaries. On GA100, VBIOS
originally rounded this value down, which could lose up to ~1GB of
usable FB. As a workaround, newer VBIOS instead rounds up to the next
1GB boundary and programs MMU_LOCK (registers 0x1fa82c/0x1fa830) to
mark the gap between the actual usable FB and the rounded-up range as
reserved.
OpenRM's kgspCalculateFbLayout_TU102() handles this by reading the
MMU_LOCK registers and computing the WPR top boundary as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
Without this, the WPR region is placed at the top of LOCAL_MEMORY_RANGE,
which overlaps the reserved region. The booter firmware detects this
and rejects the WPR layout.
Add ga100_gsp_mmu_lock_lo() to read the MMU_LOCK range and clamp
gsp->fb.bios.addr accordingly, mirroring OpenRM's behavior.
This is a GA100-only issue. GA102 and later add the
NV_USABLE_FB_SIZE_IN_MB register which reports the correct usable FB
size directly, eliminating the need for the MMU_LOCK workaround.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In OpenRM's kgspCalculateFbLayout_TU102(), gspFwWprEnd is derived from
vbiosReservedOffset, which is computed as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
The VGA workspace offset is one input into this calculation, not the
direct source of gspFwWprEnd. vbiosReservedOffset is the effective
top boundary for WPR2 placement, and it may be lower than the VGA
workspace when VBIOS has locked a region via MMU_LOCK.
In Nouveau, gsp->fb.bios.addr is the equivalent of vbiosReservedOffset,
while gsp->fb.bios.vga_workspace.addr corresponds to the raw VGA
workspace location. The original code assigned vga_workspace.addr to
gspFwWprEnd, which produced the correct result only because bios.addr
was always set equal to vga_workspace.addr and never adjusted.
Use gsp->fb.bios.addr for gspFwWprEnd to correctly mirror OpenRM's
layout logic, so that future adjustments to bios.addr (such as clamping
it to an MMU_LOCK boundary) are properly reflected in the WPR metadata
passed to the booter.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-4-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Clean up the remaining IS_ERR_OR_NULL() checks in ctrl.c and rpc.c.
The underlying functions return error pointers, so IS_ERR() is
sufficient.
This affects:
- r535_gsp_rpc_ctrl() in ctrl.c
- r535_gsp_rpc_ctor() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-6-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Replace WARN_ON(IS_ERR_OR_NULL()) with WARN_ON(IS_ERR()) in various
GSP-RM files. The underlying functions return error pointers, so
checking for NULL is redundant.
This affects:
- r535_bar_bar2_update_pde() in bar.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-5-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Clean up IS_ERR_OR_NULL() checks in the core RPC and alloc
implementation files. The underlying functions return error pointers,
so IS_ERR() is sufficient.
This affects:
- r535_gsp_rpc_rm_free() in alloc.c
- r535_gsp_rpc_rm_alloc_push() in alloc.c
- r535_gsp_msgq_recv() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-4-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
The underlying nvkm_gsp_rpc_get() function returns error pointers,
so checking for NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR()
instead.
This affects nvkm_gsp_rpc_rd().
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-3-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
The underlying functions already return error pointers, so checking for
NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR() instead.
This affects:
- nvkm_gsp_rm_alloc_get()
- nvkm_gsp_rm_alloc()
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-2-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org
Fixes: 5ae6e89f7409 ("HID: wacom: implement the finger part of the HID generic handling")
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Don't skip the io accounting for passthrough commands if the user
enabled tracking these.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260528010041.1533124-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xe OA and EU-stall paths open-code a partial copy of the system-wide
perf CPU-event permission check:
if (xe_observation_paranoid && !perfmon_capable())
return -EACCES;
This open-coded check skips two things perf_allow_cpu() handles: the
graduated kernel.perf_event_paranoid policy that an administrator
may have tuned, and the security_perf_event_open() LSM hook.
Introduce xe_observation_paranoid_check() to wrap perf_allow_cpu(),
and convert the open-coded sites in xe_oa.c and xe_eu_stall.c. The
dev.xe.observation_paranoid sysctl still acts as an escape hatch
when cleared.
xe observation now consults kernel.perf_event_paranoid and the LSM
perf hook on every open. Sites that have already configured an LSM
perf policy or tuned the paranoid sysctl will see those settings
extend to xe.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260527225507.2044027-3-ashutosh.dixit@intel.com
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
|
|
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Update tegra_bo_iommu_map() to correctly check for errors from
iommu_map_sgtable.
Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-2-fb484c07d2a1@nvidia.com
|
|
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-1-fb484c07d2a1@nvidia.com
|
|
The drivers/gpu/host1x/context_bus.c does not include any declaration of
host1x_context_device_bus_type, and after including "context.h" it also
showed that there are two definitions in the kernel because the extern
declaration was missing the const qualifier.
Include linux/host1x_context_bus.h and drop the wrong declaration from
context.h. While at it, also predeclare struct host1x_memory_context.
Fixes the following sparse warning:
drivers/gpu/host1x/context_bus.c:9:23: warning: symbol 'host1x_context_device_bus_type' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[treding@nvidia.com: minor fixups, reword commit message to reflect changes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260123140512.609167-1-ben.dooks@codethink.co.uk
|
|
The of_for_each_phandle() macro increments the reference count of the
device node it iterates over. If the loop exits early, the reference must
be released manually.
In tegra_dc_has_output(), the function returns true immediately when a
match is found, failing to release the current node's reference.
Fix this by adding a call to of_node_put() before returning from the loop.
Fixes: c57997bce423 ("drm/tegra: sor: Add Tegra186 support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260128-dc-v1-1-a88205826301@gmail.com
|
|
Without the cmu, nvdisplay will display colors that are notably darker
than intended. The vendor bootloader and the downstream display driver
enable the cmu and sets a sRGB table. Loading that table here results in
the intended colors.
Co-developed-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com> # Jetson AGX Xavier
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260407-tegra-drm-cmu-v4-1-2fe95f305afd@gmail.com
|
|
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path.
Fixes: f4c5cf88fbd50 ("gpu: host1x: Provide a proper struct bus_type")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260413141526.2961841-1-lgs201920130244@gmail.com
|
|
In tegra_mipi_request(), when provider.np is not equal with args.np, it
returns without calling of_node_put(args.np), causing a reference leak.
Convert to use the existing goto out pattern to ensure proper cleanup.
Fixes: 767598d447aa ("gpu: host1x: mipi: Update tegra_mipi_request() to be node based")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260416-mipi-v1-1-9c027175abdf@gmail.com
|
|
Fbdev framebuffer allocation now goes through the regular ioctl call
chain. This makes tegra_fb_alloc() an internal helper function. Declare
it as static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-6-tzimmermann@suse.de
|
|
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces.
Using client-buffer interfaces unifies framebuffer allocation for
DRM clients in user space and tegra's internal fbdev emulation. It
also simplifies the clean-up side of the fbdev emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-5-tzimmermann@suse.de
|
|
Replace the geometry and size calculation in tegra's fbdev emulation
with DRM format helpers. This consists of a 4CC lookup from the fbdev
parameters, format lookup, pitch calculation and size calculation.
Then allocate the GEM buffer object for the framebuffer memory from
the calculated size.
Set up mode_cmd with the calculated values just before allocating the
framebuffer. This code will later be replaced with a DRM client buffer.
Set framebuffer size fields in struct fb_info from the size stored in
the GEM buffer object instead of what has been requested. The requested
size is an estimate, while the buffer size is the exact value rounded
to the correct alignment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-4-tzimmermann@suse.de
|
|
The screen_buffer field in struct fb_info contains the kernel address
of the first byte of framebuffer memory. Do not add the display offset.
This offset only describes scrolling during scanout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-3-tzimmermann@suse.de
|
|
That field already contains the value being assigned. No need to do
this twice.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 63c971af4036 ("drm/fb-helper: Allocate and release fb_info in single place")
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-2-tzimmermann@suse.de
|
|
Use correct kernel-doc format and add missing nested struct entries to
eliminate kernel-doc warnings:
Warning: drivers/gpu/drm/tegra/dp.h:28 Incorrect use of kernel-doc format:
* tps3_supported:
Warning: drivers/gpu/drm/tegra/dp.h:54 struct member 'tps3_supported'
not described in 'drm_dp_link_caps'
dp.h:73: warning: Function parameter or struct member 'apply_training'
not described in 'drm_dp_link_ops'
dp.h:73: warning: Function parameter or struct member 'configure'
not described in 'drm_dp_link_ops'
dp.h:160: warning: Excess struct member 'cr' description in 'drm_dp_link'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184442.693768-1-rdunlap@infradead.org
|
|
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels.
Signed-off-by: shayderrr <darknessshayder@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517170456.84927-1-darknessshayder@gmail.com
|
|
Remove the deprecated trivial helper drm_simple_encoder_init(). Inline
the call to drm_encoder_init and add instance of
drm_encoder_funcs.
Signed-off-by: Jacob McLemore <jmclemore.lkml@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260523012824.81043-1-jmclemore.lkml@gmail.com
|
|
The helper drm_simple_encoder_init() is a trivial wrapper around
drm_encoder_init() that only provides a static drm_encoder_funcs with
.destroy set to drm_encoder_cleanup(). Open-code the initialization
with a driver-specific instance of drm_encoder_funcs and remove the
dependency on drm_simple_kms_helper.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Souradipto Das <souradiptodas6@gmail.com>
[treding@nvidia.com: fix issues flagged by checkpatch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260513100501.6468-1-souradiptodas6@gmail.com
|
|
When the fence list is empty, host1x_intr_update_hw_state()
falls through to host1x_intr_disable_syncpt_intr()
which does two MMIO writes to disable the syncpoint
interrupt and clear its status.
The ISR has already disabled and acked the interrupt
before calling host1x_intr_handle_interrupt(), making
these two writes redundant. Skip the update_hw_state()
call if no fences remain.
Measured Syncpoint wait latency (50000 samples):
Average latency: 10.6 us -> 9.4 us
99.99 pct latency: 51.90 us -> 36.58 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-3-tanmayp@nvidia.com
|
|
In host1x_syncpt_wait(), the hardware syncpoint value was loaded
initially for expiry check, and then loaded a second time to
populate the caller's value pointer. Reuse a single load for
both purposes.
After dma_fence_wait_timeout(), the previous code reloaded the syncpoint
value for the expiry check, which is only required in the timeout case.
On success (i.e., return value > 0, or return value == 0 with zero
jiffies remaining), the ISR has already cached the value before
signaling the fence. The value pointer can therefore be populated using
the cached value using host1x_syncpt_read_min() without MMIO access.
Only the timeout path requires a fresh load, move host1x_syncpt_load()
under that path.
Measured Syncpoint wait latency (50000 samples):
Average latency: 12.2 us -> 10.6 us
99.99 pct latency: 62.96 us -> 51.90 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-2-tanmayp@nvidia.com
|
|
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment.
Reported-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1f39b1dfa53c ("drm/tegra: Implement buffer object cache")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260515-host1x-bocache-leak-v1-1-a0375f68aeab@nvidia.com
|
|
The current power management configuration causes GR2G/GR3D to malfunction
after resume. Reconfigure all PM actions to be handled within the GR*D
probe and remove operations to address this.
Fixes: 62fa0a985e2c ("drm/tegra: Enable runtime PM during probe")
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-3-clamor95@gmail.com
|
|
is registered
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-2-clamor95@gmail.com
|
|
Replace the manual ternary "s" pluralization with str_plural() to
simplify the code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260521194658.366737-4-thorsten.blum@linux.dev
|
