| Age | Commit message (Collapse) | Author |
|---|
|
Fix bug where `read_more_at_offset` would unnecessarily read more data.
This happens when the window to read has some part cached and some part
not. It would read `len` bytes instead of just the uncached portion,
which could read past `BIOS_MAX_SCAN_LEN`.
Fixes: 6fda04e7f0cd ("gpu: nova-core: vbios: Add base support for VBIOS construction and iteration")
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260525-fix-vbios-v5-3-e5e455251537@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
`read_bios_image_at_offset` is called with a length from the VBIOS
header, so we should be more defensive here and use checked arithmetic.
Fixes: 6fda04e7f0cd ("gpu: nova-core: vbios: Add base support for VBIOS construction and iteration")
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260525-fix-vbios-v5-2-e5e455251537@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Current code lets `current_offset` go to `BIOS_MAX_SCAN_LEN` which is
one byte too far.
Fixes: 6fda04e7f0cd ("gpu: nova-core: vbios: Add base support for VBIOS construction and iteration")
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260525-fix-vbios-v5-1-e5e455251537@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
After kobject_init_and_add(), the lifetime of the embedded struct
kobject is expected to be managed through the kobject core reference
counting.
In add_port(), failure paths after kobject_init_and_add() must not free
struct mlx4_port directly, because the embedded kobject is then managed
by the kobject core. Freeing it directly leaves the kobject reference
counting unbalanced and can lead to incorrect lifetime handling.
Allocate the pkey and gid attribute arrays before kobject_init_and_add(),
so failures before kobject initialization can be handled by directly
freeing the allocated memory. Once kobject_init_and_add() has been
called, unwind later failures by removing any successfully created sysfs
groups, calling kobject_del(), and then releasing the embedded kobject
with kobject_put().
Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device")
Link: https://patch.msgid.link/r/20260518021910.972900-1-lgs201920130244@gmail.com
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list
and releases pending_lock while the struct's kref is still at 1:
list_del_init(&ip->pending_mmaps);
spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */
ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */
[...]
rxe_vma_open(vma); /* kref_get, ref → 2 */
remap_vmalloc_range_partial() walks PTEs without any lock.
A concurrent DESTROY_CQ ioctl on another CPU calls:
kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */
vfree(ip->obj) /* clears vmalloc PTEs mid-walk */
kfree(ip) /* frees rxe_mmap_info */
This yields:
1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the
per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert
2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears
it. User VMA holds a PTE to a free'd page which might eventually get
reallocated later by vmalloc which allows the attacker to get a clean
page-level UAF.
It is worth noting that even though a page-level UAF is possible given
the strong primitive, it is statistically very difficult to achieve
given the very short time window (after the last insert_page and before
the kref_get).
The call trace are as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:validate_page_before_insert+0x32/0x300
Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5
RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00
R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20
FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0
Call Trace:
<TASK>
insert_page+0x8f/0x190
? __pfx_insert_page+0x10/0x10
? kasan_save_alloc_info+0x38/0x60
vm_insert_page+0x2e7/0x400
remap_vmalloc_range_partial+0x212/0x3e0
remap_vmalloc_range+0x6e/0xb0
? __kasan_check_write+0x14/0x30
rxe_mmap+0x2e9/0x5d0
ib_uverbs_mmap+0x1ad/0x2c0
__mmap_region+0x12c2/0x2ad0
? __pfx___mmap_region+0x10/0x10
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_prev_slot+0x360/0x39c0
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_next_slot+0x1e5b/0x2f40
? __sanitizer_cov_trace_cmp8+0x18/0x30
? unmapped_area_topdown+0x4dd/0x610
? kfree+0x1b1/0x440
? free_cpumask_var+0x16/0x30
? __kasan_slab_free+0x7d/0xa0
? __sanitizer_cov_trace_cmp8+0x18/0x30
mmap_region+0x2e6/0x3c0
do_mmap+0xa3e/0x12a0
? __pfx_do_mmap+0x10/0x10
? __kasan_check_write+0x14/0x30
? down_write_killable+0xba/0x160
? __pfx_down_write_killable+0x10/0x10
? __sanitizer_cov_trace_cmp4+0x16/0x30
vm_mmap_pgoff+0x2d4/0x4a0
? __pfx_vm_mmap_pgoff+0x10/0x10
? fget+0x1bf/0x270
ksys_mmap_pgoff+0x40c/0x690
? __sanitizer_cov_trace_const_cmp4+0x16/0x30
? __pfx_ksys_mmap_pgoff+0x10/0x10
? __kasan_check_write+0x14/0x30
? _raw_spin_trylock+0xbb/0x130
? __pfx__raw_spin_trylock+0x10/0x10
__x64_sys_mmap+0x135/0x1e0
x64_sys_call+0x1c14/0x2790
do_syscall_64+0xd2/0x1050
? rcu_core+0x352/0x7d0
? rcu_core_si+0xe/0x20
? handle_softirqs+0x1aa/0x650
? __sanitizer_cov_trace_cmp4+0x16/0x30
? fpregs_assert_state_consistent+0xe1/0x160
? irqentry_exit+0xb1/0x670
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Link: https://patch.msgid.link/r/20260515002537.6209-1-yanjun.zhu@linux.dev
Reported-and-tested-by: nasm <n4sm@protonmail.com>
Suggested-by: nasm <n4sm@protonmail.com>
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add support for dynamically discovering and exposing Configuration
Security Unit (CSU) registers through sysfs. Leverage the existing
PM_QUERY_DATA API to discover available registers at runtime, making
the interface flexible and maintainable.
Key features:
- Dynamic register discovery using PM_QUERY_DATA API
* PM_QID_GET_NODE_COUNT: Query number of available registers
* PM_QID_GET_NODE_NAME: Query register names by index
- Automatic sysfs attribute creation under csu_registers/ group
- Read operations via existing IOCTL_READ_REG API
- Write operations via existing IOCTL_MASK_WRITE_REG API
The sysfs interface is created at:
/sys/devices/platform/firmware:zynqmp-firmware/csu_registers/
Currently supported registers include:
- multiboot (CSU_MULTI_BOOT)
- idcode (CSU_IDCODE, read-only)
- pcap-status (CSU_PCAP_STATUS, read-only)
The dynamic discovery approach allows firmware to control which
registers are exposed without requiring kernel changes, improving
maintainability and security.
The firmware does not currently expose per-register access mode
information, so the kernel cannot distinguish read-only registers
from read-write ones at discovery time. All discovered registers are
therefore created with sysfs mode 0644, and the firmware is
responsible for rejecting writes to registers it treats as read-only
(for example idcode and pcap-status); that error is propagated back
to userspace from the store callback. If a per-register access-mode
query is added to the firmware in the future, sysfs permissions can
be tightened to match.
CSU register discovery is an optional feature: on firmware that lacks
support for PM_QID_GET_NODE_COUNT or PM_QID_GET_NODE_NAME, the probe
returns gracefully without exposing any sysfs entries. To keep the
memory footprint minimal on that path, partial devm allocations made
during discovery are explicitly released on failure so that no memory
lingers until device unbind when the feature is unavailable.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260520093654.3303917-3-ronak.jain@amd.com
|
|
The irdma_copy_user_pgaddrs function loops through all of the umem DMA
blocks to populate the PBLEs and will stop when either the last DMA
block is reached or palloc->total_cnt is reached. The issue is that
the logic for checking palloc->total_cnt would only work for non-zero
values.
When irdma_setup_pbles is called with lvl==0, it
calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means
the only way to break out of the loop is to reach the last umem DMA
block, which means it could end up going beyond the fixed size of 4
iwmr->pgaddrmem array that is used in the lvl==0 case.
In the case of QP/CQ/SRQ rings, the value of lvl is determined by a
separate input (for example, req.cq_pages in the case of a CQ). So,
we must perform explicit checking to ensure we don't overflow the
pgaddrmem array if the user provides a umem that consists of more
blocks than their provided req.cq_pages.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260512183852.614045-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use of_device_get_match_data() to fetch platform match data directly
instead of open-coding an of_match_device() lookup.
This also lets the driver drop the of_device.h include.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260519004352.627148-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Detect DPRX capability changes without a long HPD or RX_CAP_CHANGED
signal and queue a corresponding link params reset.
Besides detecting the above unexpected capability changes, this also
avoids races between queuing and handling a deferred link params reset.
v2: (Ville)
- Query/set intel_dp::reset_link_params instead of using helpers for
these.
- Assert matching types for old/new common rate elements as well.
- Add TODO: for adding a struct tracking both rates and number of rates.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260522160514.2628249-5-imre.deak@intel.com
|
|
Cache the maximum common lane count together with the common link
rates.
This is safe because the cached value is updated:
- during driver probe, before the connector is registered and can be
used for mode validation or modesetting
- during resume, before output HW state readout can query it
- during connector detection, right after updating the sink/link
capabilities
Caching the value allows detecting max common lane count changes in
a follow-up change and keeps the tracking of max common lane count
aligned with that of common rates.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260522160514.2628249-4-imre.deak@intel.com
|
|
Add intel_dp_set_common_link_params() to prepare for updating the
maximum common lane count together with the common rates.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260522160514.2628249-3-imre.deak@intel.com
|
|
There is no reason to distinguish between DPRX capability changes
signaled via a long HPD and via an RX_CAP_CHANGED HPD IRQ.
Both cases result in reading out the DPRX capabilities and updating the
corresponding sink and common capabilities cached in intel_dp, however
only the long HPD resets the link training/recovery state and MST link
probe parameters correspondingly. The link training/recovery state may
contain reduced maximum link rate/lane count values left over from a
previous link training failure.
Based on the above after an RX_CAP_CHANGED increased the link rate, lane
count parameters the maximum link rate/lane count in the link
training/recovery state may remain below these, leaving the newly added
valid configurations unavailable for subsequent modesets in an
inconsistent way.
Handle RX_CAP_CHANGED IRQs the same way as long HPDs and reset the link
recovery state and MST link probe parameters in that case as well.
v2: Set intel_dp::reset_link_params instead of using a helper for this.
(Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260522160514.2628249-2-imre.deak@intel.com
|
|
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback().
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/8200dbc199c7a9b75ac7e8af6c748d2189b5ebd5.1779542874.git.me@berkoc.com
|
|
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults.
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/6945b22419c7d404b4954a113de2ac9c900dba93.1779542874.git.me@berkoc.com
|
|
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
On some SoCs (e.g. SpacemiT K3), multiple I2S controllers share the
same physical BCLK. When one controller is already streaming, the
others must use hw_params that result in the same BCLK rate, otherwise
the shared clock would be reconfigured and corrupt the active stream.
This series adds framework-level support for this constraint:
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible.
The K3 SoC uses the same I2S IP as K1 but requires additional clocks:
a dedicated sysclk_div, along with c_sysclk and c_bclk which are
shared across multiple I2S controllers.
Patch 2 adds a DEFINE_GUARD wrapping snd_soc_card_mutex_lock() and
snd_soc_card_mutex_unlock() so that scope-based locking picks up the
SND_SOC_CARD_CLASS_RUNTIME lockdep subclass.
Patch 3 adds the constraint logic in soc-pcm.c. During PCM open,
every DAI that has a bclk clock pointer gets a hw_rule registered
unconditionally. The rule callback runs at hw_refine time: it scans
the card for an active peer sharing the same physical BCLK (via
clk_is_match()) that has already completed hw_params, then constrains
the current stream's rate to match the established BCLK rate. The
first DAI to complete hw_params is unconstrained; subsequent DAIs
must match. Two modes are supported:
- Default (I2S): BCLK = rate * channels * sample_bits. The rule
derives the valid rate range from the current channel and
sample_bits intervals.
- Explicit ratio (TDM): if the driver sets dai->bclk_ratio
(e.g. slots * slot_width), the rule computes the single valid
rate as active_bclk_rate / bclk_ratio.
This series was prompted by review feedback on the SpacemiT K3 I2S
series, where a vendor-specific fixed-sample-rate property was rejected
in favor of a generic framework solution:
https://lore.kernel.org/all/afFqgF6ZRwYdfUmL@sirena.co.uk/
Link: https://patch.msgid.link/20260522-i2s-same-blk-v4-0-a71a86faaa20@linux.spacemit.com
|
|
For Legacy timing generator, if there are no panel replay/sel_update or
other SRD constraints, the Set context latency (SCL) window should be
at least 1.
However, for VRR timing generator the SCL window can be 0. It has other
guardband constraints, but that are checked during guardband computation.
Allow SCL to be 0 for platforms that have VRR TG always on.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260517142753.2813959-3-ankit.k.nautiyal@intel.com
|
|
'needs_sel_update' is common for both display version branches, so check it
once and keep the version specific checks as separate early returns.
v2: Split into separate early returns. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260517142753.2813959-2-ankit.k.nautiyal@intel.com
|
|
Add support for identifying the R-Car M3Le (R8A779MD) SoC.
The Renesas R-Car R8A779MD M3Le SoC is a variant of the already
supported R-Car M3-N SoC with reduced peripherals.
Enable support for the M3Le SoC through already existing ARCH_R8A77965
configuration symbol. PRR reads 0x67c05501.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260504144534.43745-6-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Since Lunarlake there is no restriction planar planes has to be even
positions. Due to this we may end up having odd offset for UV-plane in
selective fetch configuration. Add handling for this case into selective
fetch configuration.
Bspec: 68927
Suggested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Vidya Srinivas <vidya.srinivas@intel.com>
Link: https://patch.msgid.link/20260512080022.2527094-1-jouni.hogander@intel.com
|
|
We are observing following warnings:
*ERROR* power well DC_off state mismatch (refcount 0/enabled 1)
gen9_dc_off_power_well_enabled is considering target state DC_STATE_DISABLE
as DC_OFF power well being enabled. Fix this by using wakeref for the
purpose.
To achieve this we need to modify notification code as well. Currently it
is possible that PSR gets notified vblank enable/disable twice on same
status. This is currently not a problem as it is just triggering call to
intel_display_power_set_target_dc_state with same target state as a
parameter. When using wakeref this becomes a problem due to reference
counting. Fix this storing vbank status on last notification and use that
to ensure there are no more than one notification with same vblank status.
v2: ensure there is no subsequent notifications with same status
Fixes: aa451abcffb5 ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-2-jouni.hogander@intel.com
|
|
Currently we are blocking DC states only when Panel Replay is enabled on
vblank enable. It may happen that Panel Replay is getting enabled when
vblank is already enabled. Fix this by blocking DC states always if Panel
Replay is supported.
While at it take care of possible dual eDP case by looping all encoders
supporting PSR.
Fixes: 0c427ac78a1d ("drm/i915/psr: Add interface to notify PSR of vblank enable/disable")
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-1-jouni.hogander@intel.com
|
|
Populate struct gpio_chip::set_config to allow various GPIO settings.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260515124008.2947838-3-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The pinctrl and GPIO core code make exceptions for the -ENOTSUPP error
code. One such example is gpio_set_config_with_argument_optional(),
which returns success when gpio_set_config_with_argument() returns
-ENOTSUPP, but reports failure for all other error codes.
Returning -EOPNOTSUPP from the pinctrl driver on the unsupported pinctrl
operation may lead to boot failures when pinctrl drivers implements
struct gpio_chip::set_config, the system uses GPIO hogs, and the
struct gpio_chip::set_config implementation returns -EOPNOTSUPP for the
unsupported operations.
Return -ENOTSUPP for the unsupported pinctrl operation.
Fixes: 560c633d378a ("pinctrl: renesas: rzg2l: Drop oen_read and oen_write callbacks")
Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260515124008.2947838-2-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
In rzt2h_pinctrl_set_pfc_mode(), read the PMC and PFC registers upfront
and skip the pin function configuration if the pin is already in
peripheral mode with the desired function.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260513115312.1574367-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Variable 'j' in rzt2h_pinctrl_register() is incremented during pin
descriptor initialization but never used afterwards.
Remove the unused variable and the associated dead code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260513115312.1574367-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename the internal loop iterator variable in the for_each_mod_clock()
macro from 'i' to '__i'.
The current naming conflicts with local loop variables named 'i' inside
code blocks that utilize the macro, triggering compiler warnings due to
variable shadowing:
drivers/clk/renesas/rzg2l-cpg.c:1494:36: warning: declaration of `i` shadows a previous local [-Wshadow]
1494 | for (unsigned int i = 0; i < clk->num_shared_mstop_clks; i++)
Using a unique identifier for the macro-internal iterator resolves the
shadowing warnings globally across all macro expansions.
Fixes: 3fd4a8bb4b63 ("clk: renesas: rzg2l: Add macro to loop through module clocks")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520092947.70596-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Drop the unused DEF_G3S_MUX helper macro from the r9a08g045 CPG
driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520092516.69819-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
spacemit_pin_set_config() looks up the per-pin descriptor with
spacemit_get_pin() then checks the wrong variable for failure:
const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
...
if (!pin)
return -EINVAL;
reg = spacemit_pin_to_reg(pctrl, spin->pin);
pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a
valid pin, so rejecting it here drops the PAD config write for the first
pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as
its first entry, so its drive-strength / bias configuration was silently
ignored.
The intended guard is against spacemit_get_pin() returning NULL when the
pin id isn't in the SoC's pin table. Check spin instead, which both
restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Drivers were accessing this drm_exec member directly.
While that may seem harmless, it will require action if
the drm_exec utility is made a subclass of a dma-resv transaction
utility as outlined in the cover-letter.
Provide an accessor, drm_exec_ticket() to avoid that.
v2:
- Fix amdgpu compile error (Intel CI)
- Update the commit message.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-5-thomas.hellstrom@linux.intel.com
|
|
The xe driver was using the drm_exec retry pointer directly to
restart the locking loop after out-of-memory errors. This is
relying on undocumented behaviour.
Instead add a drm_exec_retry() macro that can be used in this
situation, and that also warns if the struct drm_exec is
not newly (re-)initialized.
Use that macro in xe.
v2:
- Only allow if the drm_exec context is newly initialized.
(Christian)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-4-thomas.hellstrom@linux.intel.com
|
|
Nobody makes any use of it. Possible internal future users can
instead use the _index variable. External users shouldn't use
it since the array it's pointing into is internal drm_exec state.
v2:
- Use a unique id for the loop variable (Christian)
Assisted-by: GitHub Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-2-thomas.hellstrom@linux.intel.com
|
|
Change dev_err&return statements into dev_err_probe throughout the driver
on the probing path.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@oss.nxp.com>
Reviewed-by: Enric Balletbo i Serra <eballetb@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The pinctrl_generic_to_map() and pinctrl_generic_pins_function_dt_node_to_map()
functions are built whenever CONFIG_GENERIC_PINCTRL is enabled, including
configurations without CONFIG_OF.
When CONFIG_OF is disabled, the dummy definitions are also present in the header,
which causes the build to fail:
drivers/pinctrl/pinctrl-generic.c:20:5: error: conflicting types for 'pinctrl_generic_to_map'; have 'int(struct pinctrl_dev *, struct device_node *, struct device_node *, struct pinctrl_map **, unsigned int *, unsigned int *, const char **, unsigned int, const char **, unsigned int *, unsigned int)'
20 | int pinctrl_generic_to_map(struct pinctrl_dev *pctldev, struct device_node *parent,
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/pinctrl/pinctrl-generic.c:16:
drivers/pinctrl/pinconf.h:193:1: note: previous definition of 'pinctrl_generic_to_map' with type 'int(struct pinctrl_dev *, struct device_node *, struct device_node *, struct pinctrl_map **, unsigned int *, unsigned int *, const char **, unsigned int, const char **, unsigned int *, void *)'
193 | pinctrl_generic_to_map(struct pinctrl_dev *pctldev, struct device_node *parent,
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-generic.c:130:5: error: redefinition of 'pinctrl_generic_pins_function_dt_node_to_map'
130 | int pinctrl_generic_pins_function_dt_node_to_map(struct pinctrl_dev *pctldev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinconf.h:184:1: note: previous definition of 'pinctrl_generic_pins_function_dt_node_to_map' with type 'int(struct pinctrl_dev *, struct device_node *, struct pinctrl_map **, unsigned int *)'
184 | pinctrl_generic_pins_function_dt_node_to_map(struct pinctrl_dev *pctldev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Removing either set of definitions is sufficient to avoid the problem.
Remove the copy from the header for simplicity.
Fixes: aaaf31be0426 ("pinctrl: extract pinctrl_generic_to_map() from pinctrl_generic_pins_function_dt_node_to_map()")
Fixes: 43722575e5cd ("pinctrl: add generic functions + pins mapper")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Use IS_ENABLED() inline assigning a variable instead of ifdeffery.
Cc: Rosen Penev <rosenp@gmail.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-gpio/CAMuHMdX7t7VHTzybjYo3s8SU3XLEH9GKsxmLBbh7p4D1CT3H_Q@mail.gmail.com/
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Flexible arrays should use __counted_by() to be able to do
runtime checks that the array does not go out of range.
Cc: Rosen Penev <rosenp@gmail.com>
Fixes: 87182ef0bf93 ("pinctrl: starfive: jh7110: use struct_size")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Implement pin multiplexing (and pin configuration where applicable)
for the AST2700 SoC1 SCU pinctrl block using static SoC data tables.
Unlike legacy ASPEED pin controllers, the SoC1 pin function control
fields are highly regular, which makes it practical to describe the
packed-field register layout directly in driver data rather than reuse
the existing Aspeed pinctrl macro infrastructure.
The driver uses the generic pinctrl, pinmux and pinconf frameworks.
The controller registers are accessed via regmap from the parent
syscon, allowing shared ownership of the SCU register block.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Firmware expects IPC messages to always carry the full fixed
sizeof(struct vpu_jsm_msg) size. Sending the full struct also
ensures unused fields are zeroed, which maintains compatibility
when existing commands are extended with new fields in the future.
Replace the misleading TODO comment with an explanation of the
actual intent.
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260522093209.1169716-1-karol.wachowski@linux.intel.com
|
|
Commit e18947038bf4 ("ACPI: driver: Do not set acpi_device_class()
unnecessarily") modified acpi_button_remove() to clear the device class
field in struct acpi_device on driver removal, but it should also have
updated the rollback path in acpi_button_probe(), which it didn't do,
so do it now.
Fixes: e18947038bf4 ("ACPI: driver: Do not set acpi_device_class() unnecessarily")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/6167713.MhkbZ0Pkbq@rafael.j.wysocki
|
|
Prior to commit 57c31e6d620f ("ACPI: scan: Use acpi_setup_gpe_for_wake()
for buttons"), ACPI button wakeup GPEs having handler methods remained
enabled after acpi_wakeup_gpe_init(), but currently they are not enabled
because acpi_setup_gpe_for_wake() disables them.
That causes function keys to stop working on some systems [1] and there
may be other related issues elsewhere.
To address that, make the ACPI button driver enable wakeup GPEs for ACPI
buttons so long as they have handler methods. While this does not
restore the old behavior exactly (the ACPI button driver needs to be
bound to the button devices for the GPEs to be enabled), it should be
sufficient to restore the missing functionality.
For this purpose, introduce acpi_enable_gpe_cond() that enables
a GPE if its dispatch type matches the supplied one and modify
acpi_button_probe() to use that function for enabling the GPEs in
question.
Fixes: 57c31e6d620f ("ACPI: scan: Use acpi_setup_gpe_for_wake() for buttons")
Reported-by: Nick <nick@kousu.ca>
Closes: https://lore.kernel.org/linux-acpi/E2OXET.4X5GTP37VTNC3@kousu.ca/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Nick <nick@kousu.ca>
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
Link: https://patch.msgid.link/9629117.CDJkKcVGEf@rafael.j.wysocki
|
|
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate.
Fixes: a7e23ec17fee ("ACPI: button: Install notifier for system events as well")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.15+ <stable@vger.kernel.org> # 6.15+
Link: https://patch.msgid.link/7954431.EvYhyI6sBW@rafael.j.wysocki
|
|
Currently, the pinctrl core strictly requires all drivers to implement
.get_groups_count and .get_group_name callbacks in their pinctrl_ops.
However, for simple pinctrl drivers that act purely as GPIO controllers
and pin-specific configuration proxies, without any concept of muxing or
pin groups, this strict requirement forces the implementation of dummy
callbacks just to satisfy pinctrl_check_ops().
Relax this requirement for pin-only drivers by making the group callbacks
optional when no muxing or group pin configuration support is provided.
Update the core and debugfs helpers to check for the existence of these
callbacks before invoking them.
Drivers that provide muxing or group pin configuration operations still
must implement group enumeration and naming callbacks, and are rejected
at registration time if they do not.
Suggested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The binding (microchip,mcp23s08) specifies microchip,spi-present-mask
as uint8, but driver would read u32, causing type mismatch. Use
device_property_read_u8 to match binding spec, hardware (8 chips max),
& prevent probe failure.
Cc: stable@vger.kernel.org
Fixes: 3ad8d3ec6d87 ("dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format")
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Regmap initialization triggers regcache_maple_populate() which attempts
SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to
be set, without them, NULL pointer dereference occurs during probe.
Move initialization before mcp23s08_spi_regmap_init() call.
Cc: stable@vger.kernel.org
Fixes: f9f4fda15e72 ("pinctrl: mcp23s08: init reg_defaults from HW at probe and switch cache type")
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 792d2b9a1259 ("drm: drop mtrr from i915"), added this comment,
drop it since it since MTRR no longer exists since 2013 and is removed
by commit 281856477cda ("drm: rip out drm_core_has_MTRR checks").
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260522104548.980226-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
When rtw_usb_write_port() fails to submit a USB Request Block (URB)
(e.g., due to device disconnect or ENOMEM), the completion callback is
never executed.
Currently, the driver ignores the return value of rtw_usb_write_port()
in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these
functions rely on the completion callback to free the socket buffers
(skbs) and the transaction control block (txcb), a submission failure
results in:
1. A memory leak of the allocated skb in rtw_usb_write_data().
2. A memory leak of the txcb structure and all aggregated skbs in
rtw_usb_tx_agg_skb().
Fix this by checking the return value of rtw_usb_write_port(). If it
fails, explicitly free the skb in rtw_usb_write_data(), and properly
purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().
The issue was discovered in practice during device disconnect/reconnect
scenarios and memory pressure conditions. Tested by verifying normal TX
operation continues after the fix without regressions.
Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260518142311.10328-2-luka.gejak@linux.dev
|
|
The driver expects the firmware to report TX status within 500ms.
However, a timeout can be triggered when the hardware performs
background scans while under TX load. During these scans, the firmware
stays off-channel for periods exceeding 500ms, delaying the delivery of
TX reports back to the driver.
When this occurs, the purge timer fires prematurely and drops the
tracking skbs from the queue. This results in the host stack
interpreting the missing status as packet loss, leading to TCP window
collapse. In testing with iperf3, this causes throughput to drop from
~90 Mbps to near-zero for approximately 2 seconds until the connection
recovers.
Increase RTW_TX_PROBE_TIMEOUT to 2500ms for RTL8723DU. This duration is
sufficient to accommodate off-channel dwell time during full background
scans, ensuring the purge timer only trips during genuine firmware
lockups and preventing unnecessary TCP retransmission cycles.
Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260518142311.10328-1-luka.gejak@linux.dev
|
|
A user with MLO-capable router reports:
[ 753.080409] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 753.080417] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.649426] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.649445] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.855983] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
Map RTW89_TX_QSEL_B1_MGMT and RTW89_TX_QSEL_B1_HI to RTW89_TXCH_CH10.
This is probably the right channel for these queues.
This function is also used for RTL8852AU and RTL8852CU, but those
currently aren't used in DBCC mode with rtw89 so it makes no difference
for them.
Link: https://github.com/morrownr/rtw89/issues/83#issuecomment-4314735734
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0c8e0cf1-13e9-4c67-a67f-5f6f79fd0658@gmail.com
|
|
The existing quota set is for RTL8922DE-VS, so rename the existing tables.
Add new quota set for RTL8922DE, containing more memory to yield better
performance, so rearrange quota accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-14-pkshih@realtek.com
|
