| Age | Commit message (Collapse) | Author |
|---|
|
The IBTA Software Transport Verbs specification requires the QP,
Memory Window and Memory Region for a Bind Memory Window operation
to belong to the same HCA and protection domain.
rxe only checked the QP and MW protection domain for type 2 MWs.
Move the QP/MW PD check to the common bind path and also reject
binding an MW to an MR from a different PD.
Invalid bind requests continue to fail with IB_WC_MW_BIND_ERR.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Zhiwei Zhang <202275009@qq.com>
Link: https://patch.msgid.link/tencent_FD4FB25AA4FFA845E63F5AC36CF4A46CDC0A@qq.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
irdma_check_mem_contiguous() and irdma_check_mr_contiguous() verify that
PBL entries describe physically contiguous memory ranges.
Both functions calculate byte offsets using 32-bit operands. For example,
with 4 KiB pages, pg_size * pg_idx overflows 32-bit arithmetic when
pg_idx reaches 1048576. In the level-2 check, PBLE_PER_PAGE is 512, so
i * pg_size * PBLE_PER_PAGE overflows when i reaches 2048.
These values are reachable in the driver. For MRs, palloc->total_cnt
comes from iwmr->page_cnt, which is calculated by
ib_umem_num_dma_blocks(). The MR size is limited by IRDMA_MAX_MR_SIZE,
so a 4 GiB MR with 4 KiB pages can reach page_cnt of 1048576. PBLE
resources do not exclude this value either: for gen3, the limit is based
on avail_sds * MAX_PBLE_PER_SD, and MAX_PBLE_PER_SD is 0x40000, so 4 SDs
are enough for 1048576 PBLEs.
Cast one operand to u64 before the multiplications so that the offset
calculations are performed in 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Aleksandrova Alyona <aga@itb.spb.ru>
Link: https://patch.msgid.link/20260624144846.61242-1-aga@itb.spb.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The irdma driver currently issues an unconditional PF reset whenever the
HMC Error interrupt (PFINT_OICR bit 26) fires:
if (event->reg & IRDMAPFINT_OICR_HMC_ERR_M) {
ibdev_err(&iwdev->ibdev, "HMC Error\n");
iwdev->rf->reset = true;
}
request_reset() issues an IIDC_PFR to ice. In practice a single HMC_ERR
can trigger cascading PF resets, IOMMU faults during teardown, and
teardown of every RDMA connection on the device.
i40e handles the identically-named interrupt by reading
PFHMC_ERRORINFO and PFHMC_ERRORDATA and logging them without touching
device state; see commit 9c010ee0ea5f ("i40e: Suppress HMC error to
Interrupt message level") which removed the reset as "not necessary".
This patch mirrors that handling on irdma.
With this change, repeated HMC_ERR no longer produces a reset storm and
RDMA traffic on the device continues uninterrupted.
Signed-off-by: Seyeong Kim <seyeong.kim@canonical.com>
Link: https://patch.msgid.link/20260619050044.1807044-1-seyeong.kim@canonical.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings
by bumping the MR's refcount upon association.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
These fields will be used in a subsequent commit which adds
refcounting to user CQ MRs.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-4-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
User QP/CQ/SRQ rings are registered with the normal reg_mr
mechanism prior to creating the actual QP/CQ/SRQ object. In
order to prevent userspace from deregistering these special MRs
while the child object still exists, a refcount will be used.
This commit adds the refcount and logic to reject a dereg_mr
with active references. Subsequent commits will add logic to
bump this refcount when the user QP/CQ/SRQ objects are created.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-3-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Simplify/dedup the irdma_del_memlist logic in preparation for
the QP/CQ/SRQ ring MR refcounting change that will follow in
a subsequent commit.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock.
Fixes: 71c9de995260 ("net: microchip: sparx5: Add VCAP locking to protect rules")
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Link: https://patch.msgid.link/20260630-microchip_fix_vcap_locking-v1-1-f60a4596734d@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps.
Fixes: 885743324513 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers.
Fixes: 37bc22159c45 ("crypto: rockchip - use read_poll_timeout")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
omap_rng_probe() enables runtime PM before acquiring and enabling the
functional clocks. Several later error paths returned or unwound without
undoing all state acquired so far.
If pm_runtime_resume_and_get() failed, the driver returned through the
generic ioremap error label and left runtime PM enabled. If either clock
lookup returned -EPROBE_DEFER, the function returned directly and skipped
the runtime PM cleanup; the register clock defer path could also leave the
already enabled functional clock prepared.
Route these failures through the existing unwind labels so each path only
undoes resources that were acquired successfully. Keep the resume failure
path limited to pm_runtime_disable(), and use the later labels only after
the runtime PM usage count or clocks have been acquired.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 61dc0a446e5d ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed")
Fixes: 43ec540e6f9b ("hwrng: omap - move clock related code to omap_rng_probe()")
Fixes: b166be004491 ("hwrng: omap - Fix clock resource by adding a register clock")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
Fixes: 8979744aca80 ("crypto: xilinx - Add TRNG driver for Versal")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove algorithms that are either unsafe or deprecated and have no
in-kernel users that cannot be served by the ARM CE implementations.
AES-ECB reveals plaintext patterns (identical plaintext blocks produce
identical ciphertext blocks) and should not be exposed as a hardware-
accelerated primitive. DES, Triple DES and HMAC-SHA1 have been
deprecated for years.
Remove sha1, ecb(aes), ecb(des), cbc(des), ecb(des3_ede), cbc(des3_ede),
hmac(sha1) and all AEAD variants built on these primitives as well as
authenc(hmac(sha256),cbc(des)). Also clean up the - now dead - code,
flags and constants.
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the CAAM
support which is one of the only remaining ones.
Note that the CAAM support for hwrng remains in place. That is the
interface that actually matters.
Note that this code also had several issues, including dlen > 65535
causing corruption of the CAAM descriptor.
Cc: Gaurav Jain <gaurav.jain@nxp.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e9468884 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SEV-SNP firmware provides the SNP_VERIFY_MITIGATION command, which
can be used to query the status of currently supported vulnerability
mitigations and to initiate mitigations within the firmware.
This command is an explicit mechanism to ascertain if a firmware
mitigation is applied without needing a full RMP re-build, which is most
useful in a live firmware update scenario.
The firmware supports two subcommands: STATUS and VERIFY. The STATUS
subcommand is used to query the supported and verified mitigation bits.
The VERIFY subcommand initiates the mitigation process within the FW for
the specified vulnerability. Expose a userspace interface under:
/sys/firmware/sev/vulnerabilities/
- supported_mitigations (read-only): supported mitigation vector mask
- verified_mitigations (read/write): current verified mask; write a
vector to request VERIFY for that bit
The behavior of SNP_VERIFY_MITIGATION and the pre-requisites for using
it are bug-specific. Information about supported mitigations and its
corresponding vector is to be published as part of the AMD Security
Bulletin.
See SEV-SNP Firmware ABI specifications 1.58, SNP_VERIFY_MITIGATION for
more details.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit df12ef60c87b ("crypto: qce/sha - Do not modify scatterlist passed
along with request") removed the only use of sg_last, rendering the
scatterlist traversal useless. Remove it and its local variables.
Also remove the redundant hash_later check, inline the source offset,
and assign the number of complete blocks directly to req->nbytes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There's no need for devm_platform_ioremap_resource() to be so far down.
In fact, putting it up allows direct return instead of having to goto
some branch. Also, remove the error message as the function complains
loudly itself. No need to duplicate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read.
Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Assisted-by: Gemini:1.5 Pro [google]
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
->curve_id is only set once, but never used - remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using sg_dma_len() is only valid after mapping the scatterlist with
dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping
to compare input/output lengths and to compute the transfer count.
Use the original scatterlist lengths before DMA mapping to avoid reading
stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y.
Drop the output scatterlist length in the fast path since it is equal to
->in_sg->length and does not change the transfer count.
Fixes: 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2f7 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Improve the kerneldoc for struct atmel_ecdh_ctx by removing the stale
"unsupported curves" wording, since the device only supports a single
curve (P-256), and move the set_secret() constraint to the description.
In atmel_ecdh_set_secret(), clarify that the device generates the
private key, and drop the redundant "only supports NIST P256" comment.
In atmel_ecdh_done() and atmel_ecdh_generate_public_key(), clarify the
truncation comments. Also note that a P-256 public key consists of two
32-byte coordinates in atmel_ecdh_compute_shared_secret(), and remove
the unnecessary fall-through comment and other redundant comments.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Clarify that a P-256 public key is encoded as two 32-byte coordinates.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
qcom-rng.c exposes the same hardware through two completely separate
interfaces, crypto_rng and hwrng. However, the implementation of this
is buggy because it permits generation operations from these interfaces
to run concurrently with each other, accessing the same registers. That
is, qcom_rng_generate() synchronizes with itself but not with
qcom_hwrng_read(). This results in potential repetition of output from
the RNG, output of non-random values, etc.
Fortunately, there's actually no point in hardware RNG drivers
implementing the crypto_rng interface. It's not actually used by
anything besides the "rng" algorithm type of AF_ALG, which in turn is
not actually used in practice. Other crypto_rng hardware drivers are
likewise being phased out, leaving just the hwrng support.
Thus, remove it to simplify the code and avoid conflict (and confusion)
with the hwrng interface which is the one that actually matters.
Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Zero is a valid random number and needs to be allowed. Otherwise the
output is distinguishable from random.
Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix qcom-rng.c to enable the clock before accessing the hardware.
Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy.
Fixes: 5106dfeaeabe ("crypto: qat - add AES-XTS support for QAT GEN4 devices")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The QAT reset worker queues SR-IOV reenable work using a work_struct and
completion embedded in an on-stack adf_sriov_dev_data. If the completion
wait times out, the reset worker can return while device_sriov_wq still
holds or executes the stack-backed work item.
Cancel the work on the device_sriov_wq on timeout before the stack frame
unwinds.
Fixes: 4469f9b23468 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since atmel_trng_driver keeps atmel_trng_pm_ops referenced and pm_ptr()
uses IS_ENABLED(), which allows the compiler to optimize away unused
variables, drop the redundant __maybe_unused annotation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
Fixes: 2bbb6983887f ("hwrng: use rng source with best quality")
Signed-off-by: Manos Pitsidianakis <manos@pitsidianak.is>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Namespace introduction that may need to be merged into other
trees, hence handled as an immutable branch.
|
|
Use namespaced exports for IIO consumer API functions.
This will make it easier to manage the IIO export surface. Consumer drivers
will only be provided access to a specific set of functions, thereby
restricting usage of internal IIO functions by other parts of the kernel.
This change cannot be split into several parts without breaking
bisectability, thus all of the affected drivers are modified at once.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver has a match table for the spi bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The AD3532R/AD3532 is a 16-channel, 16-bit voltage output DAC. It shares
similar functionality with AD3530R but splits its registers into two
banks: bank 0 at 0x10xx for channels 0-7 and bank 1 at 0x30xx for
channels 8-15. The input, LDAC trigger and operating-mode registers are
therefore selected per bank.
Add the AD3532R register map, channel specs, per-bank register arrays, a
dedicated powerdown handler and its own regmap_config, reusing the
table-driven helpers for the shared configuration steps.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Devices with a larger register map need their own regmap_config so
debugfs register access stays within each device's address range.
Move the config into the chip_info table and let probe pass the per-chip
config. All current devices share the same config, so no functional
change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Devices with a multi-bank register map repeat the same configuration
across several banks, which the hardcoded register addresses in
ad3530r_setup() cannot cover.
Move the addresses into per-chip arrays and add ad3530r_set_reg_bank_bits()
and ad3530r_write_reg_banks() to apply an operation to every bank. Each
current device has a single bank, so no functional change.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The software LDAC trigger register is stored in the chip_info table as a
fixed register address. Devices with a multi-bank register architecture
select the trigger register based on the channel being updated, which a
single static address cannot express.
Convert sw_ldac_trig_reg into a function pointer that returns the
trigger register for a given channel, mirroring the input_ch_reg
callback.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The driver has a match table for the usb bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704151730.42772-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
al3010_scales[] encodes the highest gain range as {0, 1187200}.
For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than
1000000, so the scale 1.1872 should instead be represented as
{ 1, 187200 }.
Since write_raw() compares the value from userspace against this
table, writing the advertised 1.1872 scale never matches the malformed
entry and returns -EINVAL. As a result, the highest gain range cannot
be selected. Reading the scale in that state also reports the malformed
value.
Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
