| Age | Commit message (Collapse) | Author |
|---|
|
retire mmhub v1.8 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire aca smu backend support for smu v13.0.6
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire pcs xgmi v6.4.0 legacy ras support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire funcs for generating legacy cper record
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire umc v12.0 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-set the ClearMcaOnRead flags for UE and CE errors during RAS late init
to maintain correct MCA error handling behavior
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire sdma v4.4.2 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire gfx v9.4.3 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
retire xgmi v6.4.0 ACA support
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Retire ACA support for vcn v4.0.3
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Retire ACA support for jpeg v5.0.1
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Retire ACA support for vcn v5.0.1
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Retire ACA support for jpeg v4.0.3
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The legacy code for parsing RAS error data from ACA logs is obsolete
and has been replaced by the unified RAS module
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the deprecated legacy RAS code path for page retirement
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES interface takes queue types as enum amdgpu_ring_type values.
The MES backend is responsible for converting those values to
firmware-facing MES_QUEUE_TYPE values when building MES packets.
The KFD queue manager was converting KFD queue types directly to
MES_QUEUE_TYPE values before filling the MES input structures. That is
the wrong abstraction level for the generic MES interface.
Change the KFD helper to return AMDGPU_RING_TYPE_* values and rename it
to make the expected type explicit. Use the helper for the add, remove,
and reset MES paths.
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES ADD_QUEUE programs the firmware with the queue type from the driver
input, but MES REMOVE_QUEUE leaves queue_type at the zero-initialized
value. Zero decodes as GFX in the MES REMOVE_QUEUE packet.
That means removing a KFD compute queue can be submitted to MES as a GFX
queue. In a debug-trap suspend/remove sequence this can leave MES
looking for the doorbell in the wrong queue class and the REMOVE_QUEUE
command may never complete. The observed failing packet removed
doorbell 0x1002 with queue_type=GFX even though the corresponding
ADD_QUEUE for the same doorbell was queue_type=COMPUTE.
Populate REMOVE_QUEUE.queue_type the same way ADD_QUEUE does.
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_gfx_reset_mes_compute is used to coordinate suspend_all, reset,
and resume_all between KCQ and compute user queues. When a hung queue
comes from the compute user queues and the reset is successful, the KCQ
failure after reset should be sent to KCQ only and not the compute user
queues. Compute user queues can operate after a successful reset without
a mode reset.
Fixes: a4e4d945cba8 ("drm/amdgpu/gfx: defer per-queue helper_end until after MES resume")
Signed-off-by: Amber Lin <amber.lin@amd.com>
Acked-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add set_debug_mode function for uniras
v2:
1.Add validation for mp1->ip_func and mp1->ip_func->set_debug_mode
2.Return -ENOTSUPP error code if the callback is missing
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
prev_sink reference
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
Fixes: 54618888d1ea ("drm/amd/display: break down dc_link.c")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260626124555.36910-1-vulab@iscas.ac.cn
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These typos were accidentally overlooked. Let's fix them now.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260624073829.40835-2-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of storing pointers to affected rings in an array,
just iterate over all rings of the device and filter the
affected rings by type using the type mask.
This is done to save memory used by the array of affected
rings which was sized AMDGPU_MAX_RINGS.
Suggested-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> # for the series
Link: https://patch.msgid.link/20260624073829.40835-1-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
to prevent svm range to be overflow or underflow.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On an XGMI reset-on-init (NPS memory patition mode switch), RAS
IP hw fini, sw fini is called but hw init is skipped due to
RAS IP block is not included in hwinit mask, so need call
RAS IP hw init during XGMI reset-on-init.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This DC patchset brings improvements in multiple areas. In summary, we have:
* Fixes on DCN4, encoder, debugfs output, and others
* Enhanced KUnit coverage
* Code cleanup
Acked-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Replace stack-allocated large structs with kunit_kzalloc() in KUnit
test functions that exceed the kernel 1280-byte stack frame limit.
Also add CONFIG_FRAME_WARN=1024 to .kunitconfig to enforce the limit.
Affected structs and files:
- struct dc_link in amdgpu_dm_connector_test.c and
amdgpu_dm_mst_types_test.c
- struct drm_plane, drm_plane_state, drm_framebuffer in
amdgpu_dm_plane_test.c
- struct drm_connector_state, drm_atomic_state in
amdgpu_dm_mst_types_test.c
- struct dm_connector_state in amdgpu_dm_test.c
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606230825.9qMV9L0g-lkp@intel.com/
Assisted-by: Copilot:Claude-Opus-4.6
Acked-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Disabling HUBP/DPP Driver PG as it's causing corruption issues.
This reverts commit 8b6ab8bdf835efb91c1d782b7c2cf32dad39238f.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] Hang occurs with global gating enabled if req=1
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Andrew Lichmanov <Andrew.Lichmanov@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
remove the forcevrr related which are not used any more.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Extract common allocation and setup patterns from KUnit test
files into a dedicated helpers module to reduce duplication.
Add tests/amdgpu_dm_kunit_helpers.c with shared helpers:
- dm_kunit_alloc_adev: allocate amdgpu_device via DRM mock
- dm_kunit_alloc_link: allocate zeroed dc_link
- dm_kunit_alloc_link_with_ctx: allocate dc_link with dc_context
- dm_kunit_alloc_dm: allocate display_manager with DC state
- dm_kunit_alloc_stream: allocate dc_stream_state with link
- dm_kunit_add_stream_to_state: wire stream into dc_state
- dm_kunit_alloc_connector: allocate connector wired to device
Update 10 test files to use the shared helpers, removing
duplicated local alloc_test_adev, alloc_test_link,
alloc_test_dm, alloc_test_stream, and add_test_stream
functions.
Add missing MODULE_DESCRIPTION() macro to suppress modpost warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in
amdgpu_dm_kunit_helpers.o
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Writeback completion is detected in dm_crtc_high_irq(), the CRTC vblank
IRQ handler. The arm path (dm_set_writeback) never took a vblank
reference, so the interrupt was only enabled incidentally (by a pageflip
on the same commit, fbcon, or a previous vblank's off-delay window).
A writeback-only commit right after a fresh drm_crtc_vblank_on() (e.g. a
writeback connector detached and re-attached) therefore has no vblank
reference: the IRQ never fires, wb_pending is never cleared and the out
fence times out. This is reproducible with IGT kms_writeback and was
seen via kms_colorop on writeback-capable hardware. The relevant IGT
branch is at
https://gitlab.freedesktop.org/hwentland/igt-gpu-tools/-/tree/yuv-fm-colorop
Take a vblank reference when arming the writeback and release it once
completion is signalled. The get is done before arming wb_pending so the
completion IRQ cannot drop the reference before it is taken. Factor the
shared completion bookkeeping into amdgpu_dm_crtc_complete_writeback()
and also call it from the teardown path, so a writeback torn down while
still pending signals its out fence and releases the reference instead of
leaking both.
Fixes: c81e13b929df ("drm/amd/display: Hande writeback request from userspace")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add KUnit coverage for the following MST functions:
- dm_dp_aux_transfer(): native read/write, partial write, error
result remapping, and HPD disconnect quirk via fake DC link service
- dm_dp_aux_transfer_result(): error code translation
- dm_dp_aux_fill_payload_flags(): request flag decoding
- dm_mst_msg_ready_mask(): ESI mask selection
- dm_mst_select_esi_dpcd(): DPCD address/length selection
- dm_mst_atomic_best_encoder(): encoder selection by CRTC ID
- dm_dp_mst_detect(): unregistered connector early return
- dm_dp_mst_atomic_check(): no-old-CRTC early return
- dm_dp_create_fake_mst_encoders(): encoder init and CRTC mask
- dm_handle_mst_sideband_msg_ready_event(): idle no-ready-bits
- retrieve_branch_specific_data(): branch OUI parsing
- retrieve_downstream_port_device(): downstream port present
- needs_dsc_aux_workaround(): DSC workaround matching
- dm_mst_get_pbn_divider(): null link guard
- amdgpu_dm_mst_reset_mst_connector_setting(): field reset
- dm_dp_mst_is_port_support_mode(): FP-off fallback
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add comprehensive KUnit test coverage for amdgpu_dm_pp_smu.c including:
- Utility functions: dc_to_pp_clock_type, pp_to_dc_clock_levels,
build_pm_display_cfg, get_default_clock_levels,
build_wm_clock_ranges_soc15, cap_clock_levels_to_validation
- DPM-backed functions: dm_pp_get_clock_levels_by_type,
dm_pp_notify_wm_clock_changes, dm_pp_apply_clock_for_voltage_request,
dm_pp_get_static_clocks
- Raven pass-throughs: pp_rv_set_wm_ranges, pp_rv_set_pme_wa_enable,
pp_rv_set_active_display_count, pp_rv_set_min_deep_sleep_dcfclk,
pp_rv_set_hard_min_dcefclk_by_freq, pp_rv_set_hard_min_fclk_by_freq
- Navi functions: pp_nv_set_wm_ranges, pp_nv_get_maximum_sustainable_clocks,
pp_nv_get_uclk_dpm_states, pp_nv_get_dpm_clock_table
- Renoir: pp_rn_get_dpm_clock_table
- dm_pp_get_funcs ASIC family selection
v2: squash in build fix for removed functions
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add Kunit tests for functions:
- link_supports_psrsu()
- amdgpu_dm_psr_fill_caps()
- amdgpu_dm_set_psr_caps()
- amdgpu_dm_psr_is_active_allowed()
- amdgpu_dm_psr_set_event()
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for amdgpu_dm_set_replay_caps(),
amdgpu_dm_link_setup_replay(), and amdgpu_dm_replay_set_event()
including happy-path tests that exercise the configuration logic,
coasting vtotal calculations, and early-return when replay events
are already in the desired state.
Assisted-by: Copilot:Claude-Opus-4.6 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit test with DRM mock for amdgpu_dm_wb_connector_init().
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Revert due to regression.
This reverts commit e82936e8dad0ccbe067323fe7c4e1ae4593104f3.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
mod_hdcp_dump_binary_message() computed target_size (a uint32_t) as roughly
byte_size * msg_size and gated the whole write on buf_size >= target_size. A
large msg_size can overflow target_size, wrapping it to a small value that
passes the check while the loop still writes byte_size * msg_size bytes
into buf. All current callers pass small constants so this is not reachable
today, but the unchecked arithmetic should be hardened.
[How]
Drop the overflow-prone target_size precomputation and instead bounds-check the
output position on every iteration, stopping once the next entry would not leave
room for the trailing terminator. This cannot overflow and, for oversized
messages, dumps as much as fits rather than printing nothing.
Fixes: 4c283fdac08a ("drm/amd/display: Add HDCP module")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() copies p_notify->aux_reply.length
bytes into payload->data without clamping. payload->data is typically a 16-byte
DPCD scratch buffer, while aux_reply.length is echoed from the sink via the DMUB
ring. While this is clamped by DMUB it's prudent to ensure we validate
this in the driver as well.
[How]
Clamp the copy to sizeof(aux_reply.data), the scratch buffer the reply was read
into, and use that for both the memcpy and the return value. For regular
transfers additionally clamp to payload->length to cover callers whose
destination buffer is smaller than 16 bytes. The write-status-update retry path
(dce_aux_transfer_with_retries) deliberately zeroes payload->length while still
expecting the partial-write status byte, so that bound is skipped in that case
to avoid dropping the reply. Also guard against a NULL payload->data.
Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Bandwidth clock programming build and execution phases were coupled,
preventing the HWSS from orchestrating them through block sequencing.
[how]
Separate clock programming into build and execute phases across
latest versions. Build phase populates the clk_mgr internal block
sequence array, then registers a single CLK_MGR_UPDATE_CLOCKS HWSS step.
Execute phase dispatches the pre-built sequence. Add HWSS operations for
clk_mgr_set_max_memclk, hubbub_program_watermarks, hubbub_program_arbiter,
and hubbub_program_compbuf_segments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
The register spec headers are duplicated in the external asic_reg path and maintaining a local copy is unnecessary.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
shift and mask are not correctly initialized in create_minimal functions.
[HOW]
Correct initialize necessary variables.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
amdgpu_dm_plane_fill_blending_from_plane_state added drm_to_adev() but
dm_test_fill_blending_global_alpha did not initialize
plane_state->plane, causing a NULL pointer dereference.
[HOW]
Add an amdgpu_device and drm_plane so the plane->dev
dereference is valid in the test.
Fixes: 829769f1cfe8 ("drm/amd/display: scale plane global alpha to 12 bits on DCN 4.2")
Cc: PingLei.Lin@amd.com
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
On DCN 4.2 the global alpha is reported using 12 bits
(MPCC_GLOBAL_ALPHA spans bits [0:11]), whereas other ASICs such as
DCN 3.1.4 use an 8-bit field (MPCC_GLOBAL_ALPHA spans bits
[16:23]). The DRM plane alpha property is 16-bit and amdgpu_dm
unconditionally scaled it down by >> 8, which only matches the 8-bit
hardware field. On DCN 4.2 this fed a value that was 4 bits too small
into the 12-bit field, so the hardware applied the wrong global alpha
and the resulting blended output did not match the expected hw * alpha
value.
[how]
Detect DCN 4.2 via amdgpu_ip_version(adev, DCE_HWIP, 0) and scale the
16-bit plane alpha by >> 4 to fill the 12-bit MPCC_GLOBAL_ALPHA field.
All other ASICs keep the existing >> 8 behavior for their 8-bit field.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <PingLei.Lin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Use an early guard for invalid DMUB notify callback registration inputs.
This keeps the same accepted and rejected cases while removing the
redundant else block.
Assisted-by: Copilot:GPT-5
Reviewed-by: Chen-Yu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Use direct boolean in connector and IRQ code paths. This removes
redundant comparisons around MST state, IRQ validation, handler
removal, and DMUB notification offload without changing behavior.
Assisted-by: Copilot:GPT-5
Reviewed-by: Chen-Yu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add kunit tests for some functions in amdgpu_dm_plane.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for amdgpu_dm_initialize_default_pipeline()
using an amdgpu_device-backed DRM mock so drm_to_adev() and
the DC color capability checks are exercised.
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Extract shared backlight device index lookup and property
setup into testable helpers. The duplicated bd-to-index
scan in update_status/get_brightness is replaced by
amdgpu_dm_backlight_get_device_index(), and the inline
backlight_properties calculation is replaced by
amdgpu_dm_backlight_fill_props().
Add KUnit coverage for both new helpers. Keep the runtime
power_supply_is_system_supplied() call at the caller so
the helpers remain pure and deterministic under test.
Assisted-by: Copilot:GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
