| Age | Commit message (Collapse) | Author |
|---|
|
vgic-v5 has introduced much more prevalent usage of the struct
irq_ops mechanism.
In the process, it becomes evident that suffers from two related
problems:
- it contains flags, rather than only callbacks
- it is mutable, because we need to update the above flags
Swap the flags for a helper retrieving the flags, and make all
irq_ops const, something that is slightly satisfying.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Constant vgic properties are usually kept in kvm_vgic_global_state,
but the vgic-v5 code does its own thing.
Move the ppi_caps data into the global structure, which has the
modest additional advantage of making it ro_after_init.
Link: https://lore.kernel.org/r/20260520091949.542365-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
drivers-for-7.2
Merge the refactoring and helper functions in the Qualcomm GENI Serial
Engine driver through a topic branch.
These changes will provide the ability to add support managing power and
performance for the GENI instances in platforms where these are
controlled as SCMI resources.
The patches are merged through a topic branch to avoid conflicts with other
changes, while making them available to other subsystems.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine (SE) drivers (I2C, SPI, and SERIAL) currently
manage performance levels and operating points directly. This resulting
in code duplication across drivers. such as configuring a specific level
or find and apply an OPP based on a clock frequency.
Introduce two new helper APIs, geni_se_set_perf_level() and
geni_se_set_perf_opp(), addresses this issue by providing a streamlined
method for the GENI Serial Engine (SE) drivers to find and set the OPP
based on the desired performance level, thereby eliminating redundancy.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-8-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine drivers (I2C, SPI, and SERIAL) currently handle
the attachment of power domains. This often leads to duplicated code
logic across different driver probe functions.
Introduce a new helper API, geni_se_domain_attach(), to centralize
the logic for attaching "power" and "perf" domains to the GENI SE
device.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-7-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI SE protocol drivers (I2C, SPI, UART) implement similar resource
activation/deactivation sequences independently, leading to code
duplication.
Introduce geni_se_resources_activate()/geni_se_resources_deactivate() to
power on/off resources.The activate function enables ICC, clocks, and TLMM
whereas the deactivate function disables resources in reverse order
including OPP rate reset, clocks, ICC and TLMM.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-6-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine drivers (I2C, SPI, and SERIAL) currently duplicate
code for initializing shared resources such as clocks and interconnect
paths.
Introduce a new helper API, geni_se_resources_init(), to centralize this
initialization logic, improving modularity and simplifying the probe
function.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a new function geni_icc_set_bw_ab() that allows callers to set
average bandwidth values for all ICC (Interconnect) paths in a single
call. This function takes separate parameters for core, config, and DDR
average bandwidth values and applies them to the respective ICC paths.
This provides a more convenient API for drivers that need to configure
specific average bandwidth values.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Provide the USB2 PHY reset definition in dt-bindings for the Nord negcc
module in order to enable adding the USB nodes in DTS.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-nord-clk-usb2-phy-v2-1-17a86cb307c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This reverts commit db359fccf212 ("mm: introduce a new page type for page
pool in page type") and a part of 735a309b4bfb9e ("net: add net_iov_init()
and use it to initialize ->page_type").
Netpp page_type'ed pages might be used in mapping so as to use @_mapcount.
However, since @page_type and @_mapcount are union'ed in struct page,
these two can't be used at the same time. Revert the commit introducing
page_type for Netpp for now.
The patch will be retried once @page_type and @_mapcount get allowed to be
used at the same time.
The revert also includes removal of @page_type initialization part
introduced by commit 735a309b4bfb9e ("net: add net_iov_init() and use it
to initialize ->page_type"), which will be restored on the retry.
Link: https://lore.kernel.org/20260515034701.17027-1-byungchul@sk.com
Fixes: db359fccf212 ("mm: introduce a new page type for page pool in page type")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Closes: https://lore.kernel.org/all/982b9bc1-0a0a-4fc5-8e3a-3672db2b29a1@nvidia.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Toke Hoiland-Jorgensen <toke@redhat.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it.
Link: https://lore.kernel.org/20260512160643.266960-1-ljs@kernel.org
Fixes: ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Closes: https://lore.kernel.org/linux-mm/20260425070700.562229-1-25181214217@stu.xidian.edu.cn/
Acked-by: Muchun Song <muchun.song@linux.dev>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
The USB Audio Offload (UAOL) can only be used from the DSP side and
on Lunar Lake (ACE2) and newer platforms the access to it's register
space must be granted by the host, just like for SSP or DMIC.
This series enable the offload for UAOL for LNL or newer devices.
Link: https://patch.msgid.link/20260520150639.25301-1-peter.ujfalusi@linux.intel.com
|
|
hdac_bus_eml_enable_offload() can only fail in case the IP is not enabled
in the platform, which is not really an error as the ACE IP can be
configured differently when integrated into a specific SoC.
While it is unlikely, but it is a valid configuration that for example the
DMIC is disabled.
In this case we will just skip setting the offload for a link that is not
present.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260520150639.25301-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Vijendar Mukunda <Vijendar.Mukunda@amd.com> says:
This series adds initial AMD ACP 7.x support for ACP7.D / 7.E / 7.F
platforms.
Compared to earlier ACP generations, ACP7.x includes substantial design
changes, including an updated register set/layout. For that reason,
the ACP7.x implementation is placed under a separate sound/soc/amd/acp7x/
directory instead of extending older-generation code paths,
keeping ACP7.x-specific logic and register definitions cleanly separated
and easier to maintain.
This initial version is intentionally focused on the core PCI driver
bring-up: register definitions, probe/remove, basic helper wiring, and
system sleep + runtime PM integration. A follow-up series will add support
for additional Audio I/O blocks, including SoundWire and the ACP PDM
controller.
The primary goal of this series is to unblock power validation, since the
ACP IP currently does not have a driver available with PM ops support on
these platforms.
Link: https://patch.msgid.link/20260507181251.20594-1-Vijendar.Mukunda@amd.com
|
|
Add acp register header file for ACP7.x(7.D/7.E/7.F) variants.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260507181251.20594-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc5).
No conflicts, adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
cc199cd1b912 ("net/mlx5e: Reduce branches in napi poll")
c326f9c68921 ("net/mlx5e: xsk: Fix unlocked writing to ICOSQ")
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
c6df9a65cbb0 ("net/mlx5: Skip disabled vports when setting max TX speed")
1fba57c91416 ("net/mlx5: Add VHCA_ID page management mode support")
net/mac80211/mlme.c
a6e6ccd5bd07 ("wifi: mac80211: consume only present negotiated TTLM maps")
49e62ec6eb06 ("wifi: mac80211: move frame RX handling to type files")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a typo "evetnfs files" to "eventfs files" in a comment.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260507081041.885781-2-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The trace_printk() macro uses a local variable _______STR to detect
whether variadic arguments are present. This name can shadow outer
variables.
Replace the local variable with sizeof applied directly to the
stringified arguments:
if (sizeof __stringify((__VA_ARGS__)) > 3)
This eliminates the shadowing risk entirely without introducing
any additional includes or local variables.
Verified with objdump on samples/trace_printk that all four cases
branch correctly: __trace_bputs, __trace_puts, __trace_bprintk,
and __trace_printk.
Link: https://patch.msgid.link/20260502075535.34997-1-tiffany019230@gmail.com
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Qian-Yu Lin <tiffany019230@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The trace_##name##_enabled() static call branch is used when work needs to
be done for a tracepoint. It allows that work to be skipped when the
tracepoint is not active and still uses the static_branch() of the
tracepoint to keep performance.
Tracepoints themselves require being called in "RCU watching" locations
otherwise races can occur that corrupts things. In order to make sure
lockdep triggers at tracepoint locations, the lockdep checks are added to
the tracepoint calling location and trigger even if the tracepoint is not
enabled. This is done because a poorly placed tracepoint may never be
detected if it is never enabled when lockdep is enabled.
As trace_##name##_enabled() also prevents the lockdep checks when the
tracepoint is disabled add lockdep checks to that as well so that if one
is placed in a location that RCU is not watching, it will trigger a
lockdep splat even when the tracepoint is not enabled.
Cc: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260430144159.10985-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
[ Updated the change log ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user know
events were dropped.
But the clearing of the missed_events happened when the tracing
system queried the ring buffer iterator about missed events. This was
premature as the ring buffer is per CPU, and the tracing code reads
all the CPU buffers and checks for missed events when it is read. If
the CPU iterator that had missed events isn't printed next, the
output for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next
event and not when the missed_events flag is queried. Also clear it
on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized too
early and gets cleared later on, making it zero and not reflect the
actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page it
is expected that: page = load_page(va); -> unload_page(page). But the
code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never was
created making every build do the work even when it was already done
previously.
* tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Create output file from cmd_check_undefined
tracing: Fix unload_page for simple_ring_buffer init rollback
tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm()
ring-buffer: Flush and stop persistent ring buffer on panic
ring-buffer: Fix reporting of missed events in iterator
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
amdxdna:
- remove mmap and export for ubuf
bridge:
- chipone-icn6211: managed bridge cleanup
- lt66121: acquire reset GPIO
- megachips: fix clean up on failed IRQ requests
gem:
- clean up LRU locking
v3d:
- fix UAF in error code paths
- release GEM-object ref on free'd jobs
virtio:
- use uninterruptible resv locking in plane updates
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260521071456.GA14644@localhost.localdomain
|
|
Add interconnect bindings and RPMh-based interconnect
driver support for the upcoming Qualcomm Hawi SoC.
* icc-hawi
dt-bindings: interconnect: qcom-bwmon: Add Hawi cpu-bwmon compatible
dt-bindings: interconnect: qcom-bwmon: Add Hawi llcc-bwmon compatible
dt-bindings: interconnect: qcom: document the RPMh NoC for Hawi SoC
interconnect: qcom: add Hawi interconnect provider driver
Link: https://patch.msgid.link/20260506-icc-hawi-v4-0-35447fdc482b@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Document the RPMh Network-On-Chip interconnect for the Qualcomm Hawi SoC.
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-icc-hawi-v4-1-35447fdc482b@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add the missing Eliza SDCC1 interconnect slave ID and provider node.
The Eliza interconnect binding and provider already describe SDCC2, but
the matching SDCC1 CNOC CFG slave was left out. Add the binding constant
and the provider node so consumers can describe SDCC1 bandwidth paths.
The provider change also adds qhs_sdc1 to qsm_cfg and bcm_cn0, and updates
the qsm_cfg link count and bcm_cn0 node count.
* icc-eliza
dt-bindings: interconnect: qcom,eliza-rpmh: Add SDCC1 slave
interconnect: qcom: eliza: Add SDCC1 slave node
Link: https://patch.msgid.link/20260514-eliza-interconnect-add-missing-sdcc1-slave-node-v2-0-13c03bc890cb@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
This adds RPMh-based interconnect support for the Qualcomm Nord SoC.
The Nord SoC features a rich Network-on-Chip topology comprising 19 NoCs
including aggregate NoCs, a high-speed configuration NoC (HSCNOC), a
multimedia NoC, four NSP data NoCs for AI/ML workloads, PCIe inbound and
outbound NoCs, a system NoC, and virtual clock/MC nodes. Bandwidth requests
are communicated to the RPMh hardware through Bus Clock Manager (BCM)
resources via the Resource State Coordinator (RSC).
* icc-nord
dt-bindings: interconnect: Document RPMh Network-On-Chip for Qualcomm Nord SoC
interconnect: qcom: Add interconnect provider driver for Nord SoC
Link: https://patch.msgid.link/20260510020607.1129773-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
When the kernel is booted with a kunit filter (e.g.,
kunit.filter="speed!=slow"), the kunit executor dynamically allocates
copies of the filtered test suites using kmalloc/kmemdup.
During the initial boot execution, kunit_debugfs_create_suite() creates
debugfs files (such as /sys/kernel/debug/kunit/<suite>/run) and
permanently stores a pointer to the dynamically allocated suite in the
inode's i_private field.
Previously, the executor freed this dynamically allocated suite_set
immediately after executing the boot-time tests. Because the debugfs
nodes were not destroyed, any subsequent interaction with the debugfs
`run` file from userspace triggered a use-after-free (UAF). On systems
with architectural capabilities, like CHERI RISC-V, this resulted in
an immediate fatal hardware exception due to the invalidation of the
capability tags on the reclaimed memory. On other architectures, it
resulted in silent memory corruption.
Fix this UAF by properly coupling the lifetime of the filtered suite
memory allocation to the lifetime of the kunit subsystem and its
associated VFS nodes. Ownership of the boot-time suite_set is now
transferred to a global tracker ('kunit_boot_suites'), and the memory
is cleanly released in kunit_exit() during module teardown.
Link: https://lore.kernel.org/r/20260507084854.233984-1-florian.schmaus@codasip.com
Fixes: e2219db280e3 ("kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display")
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Permit ACPI PRM runtime firmware calls when acpi_init() runs
- Add another Lenovo Ideapad framebuffer quirk
- Cosmetic tweak
* tag 'efi-fixes-for-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: sysfb_efi: Extend quirk to cover IdeaPad Duet 3 10IGL5-LTE
efi: efi.h: Remove extra semicolon
efi: Allocate runtime workqueue before ACPI init
|
|
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.
The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.
Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.
This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hid_warn_ratelimited macro is defined twice in include/linux/hid.h:
- first one added by commit 4051ead99888 ("HID: rate-limit hid_warn to
prevent log flooding")
- second one added by commit 1d64624243af ("HID: core: Add
printk_ratelimited variants to hid_warn() etc")).
The second definition is correctly grouped with other ratelimited macros.
Remove the duplicate definition.
Fixes: 1d64624243af ("HID: core: Add printk_ratelimited variants to hid_warn() etc")
Signed-off-by: Liu Kai <lukace97@outlook.com>
[bentiss: edited commit message]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This flag indicates the path should be opened if it's a regular file.
This is useful to write secure programs that want to avoid being
tricked into opening device nodes with special semantics while thinking
they operate on regular files. This is a requested feature from the
uapi-group[1].
The previously introduced EFTYPE error code is returned when the path
doesn't refer to a regular file. For example, if openat2 is called on
path /dev/null with OPENAT2_REGULAR in the flag param, it will return
-EFTYPE.
When used in combination with O_CREAT, either the regular file is
created, or if the path already exists, it is opened if it's a regular
file. Otherwise, -EFTYPE is returned.
When OPENAT2_REGULAR is combined with O_DIRECTORY, -EINVAL is returned
as it doesn't make sense to open a path that is both a directory and a
regular file.
The UAPI bit lives in the upper 32 bits of open_how::flags
(((__u64)1 << 32)) so that open(2) and openat(2) -- whose @flags
argument is a C int -- cannot physically express it. This is a
structural guarantee, not a runtime mask: the bit is unrepresentable in
32 bits.
Because the rest of the VFS open path narrows to 32 bits in several
places (op->open_flag, f->f_flags, the unsigned open_flag argument of
i_op->atomic_open()), build_open_flags() translates OPENAT2_REGULAR
into a kernel-internal lower-32-bit carrier __O_REGULAR (bit 4, unused
as an O_* on every architecture) before the assignment to op->open_flag.
__O_REGULAR then rides through the existing channels exactly like
__FMODE_EXEC. do_dentry_open() strips it so it cannot leak back to
userspace via fcntl(F_GETFL).
Four BUILD_BUG_ON_MSG() invariants in build_open_flags() prevent any
future bit collision or accidental low-32 redefinition:
- VALID_OPEN_FLAGS fits in 32 bits.
- OPENAT2_REGULAR lives in the upper 32 bits.
- OPENAT2_REGULAR does not alias any open()/openat() flag.
- __O_REGULAR does not alias any user-visible flag.
[1]: https://uapi-group.org/kernel-features/#ability-to-only-open-regular-files
Christian Brauner <brauner@kernel.org> says:
Move OPENAT2_REGULAR to the upper 32 bits of open_how::flags with a
kernel-internal __O_REGULAR carrier so that open(2)/openat(2) cannot
encode the flag; add BUILD_BUG_ON_MSG() invariants and register
__O_REGULAR in the fcntl_init() allocation-uniqueness BUILD_BUG_ON()
(bit count 21 -> 22).
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Not all USB4/TB implementations are based on a PCIe-attached
controller. In order to make way for these, start off with moving the
pci_device reference out of the main tb_nhi structure.
Encapsulate the existing struct in a new tb_nhi_pci, that shall also
house all properties that relate to the parent bus. Similarly, any
other type of controller will be expected to contain tb_nhi as a
member.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This function is entirely unused, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511072239.2456725-3-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The SPI controller API is asymmetric in that a controller is allocated
and registered in two step, while it is freed as part of deregistration.
[1]
This is especially unfortunate as any driver data is freed along with
the controller, something which has lead to use-after-free bugs during
deregistration when drivers tear down resources after deregistering the
controller (or tear down resources that may still be in use before
deregistering the controller in an attempt to work around the API).
To reduce the risk of such bugs being introduced a device managed
allocation interface was added, but this arguably made things even less
consistent as now whether the controller gets freed as part of
deregistration depends on how it was allocated. [2][3]
With most drivers converted to use managed allocation in preparation for
fixing the API, the remaining 16 drivers can be converted in one
tree-wide change. Ten of those drivers use the bitbang interface and can
be converted by simply removing the extra reference already taken by
spi_bitbang_start() (and updating the two bitbang drivers that use
managed allocation). [4]
Fix the API inconsistency by no longer dropping a reference when
deregistering non-devres allocated controllers.
[1] 68b892f1fdc4 ("spi: document odd controller reference handling")
[2] 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
[3] 3f174274d224 ("spi: fix misleading controller deregistration kernel-doc")
[4] 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260521073816.766596-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a v4l2_fill_pixfmt_mp_aligned helper which allows the user to
specify a custom stride alignment in bytes. This is necessary for
hardware like the Rockchip RGA3, which requires the stride value to be
aligned to a 16 bytes boundary.
The code makes some assumptions about the v4l2 format to simplify the
calculation. They currently hold for all known v4l2 formats.
v4l2_format_plane_stride uses an unsigned int as argument type to avoid
the later multiplication from overflowing the u8 value. All other places
use u8, as no practical use cases for a larger alignment are known at
the moment.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a has_alpha value to the v4l2_format_info struct to indicate if the
format contains an alpha component. This information can currently not
be queried in a generic way, but might be useful for potential drivers
to properly setup alpha blending to copy or set the alpha value.
The implementation is based on the drm_format_info implementation.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This patch adds the Device Tree binding for the clock controller
on Canaan k230. The binding defines the clocks and the required
properties to configure them correctly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xukai Wang <kingxukai@zohomail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Several DRM drivers already define their own constants for minimum and
maximum TMDS character rates.
By defining common rate constants in a shared header, drivers can just use
them instead of having driver local define macros or use magic numbers.
The values defined in the <linux/hdmi.h> header correspond to maximum TMDS
character rates defined by each HDMI specification version:
- HDMI_TMDS_CHAR_RATE_MIN_HZ: 25 MHz (minimum for all versions)
- HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ: 165 MHz (HDMI 1.0 maximum)
- HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ: 340 MHz (HDMI 1.3 maximum)
- HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ: 600 MHz (HDMI 2.0 maximum)
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-2-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Introduce a new error code EFTYPE for wrong file type operations.
EFTYPE is already used in BSD systems like FreeBSD and macOS.
This will be used by the upcoming OPENAT2_REGULAR flag support to
return a specific error when a path doesn't refer to a regular file.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
To get an operable version of an O_PATH file descriptor, it is possible
to use openat(fd, ".", O_DIRECTORY) for directories, but other files
currently require going through open("/proc/<pid>/fd/<nr>"), which
depends on a functioning procfs.
This patch adds the O_EMPTYPATH flag to openat(2)/openat2(2). If passed,
LOOKUP_EMPTY is set at path resolution time.
Note: This implies that you cannot rely anymore on disabling procfs from
being mounted (e.g. inside a container without procfs mounted and with
CAP_SYS_ADMIN dropped) to prevent O_PATH fds from being re-opened
read-write.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260424114611.1678641-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
There is legacy 'extern' keyword for the exported simple_strtox()
function which are the artefact that can be removed. So drop it.
While at it, tweak the declaration to provide parameter names.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260331070519.5974-7-ddiss@suse.de
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
No users anymore and none should be in the first place.
This reverts commit fcc155008a20fa31b01569e105250490750f0687.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260331070519.5974-6-ddiss@suse.de
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
