| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform updates from Tzung-Bi Shih:
"Improvements:
- Use named initializers for struct i2c_device_id
Fixes:
- Fix a probe race between cros_ec_sensorhub and cros_ec_sysfs
- Check for the presence of ACPI_COMPANION() for drivers converted
from acpi_driver to platform_driver to avoid issues where
device_match_driver_override() might forcibly match the driver to
the device
- Fix a possible UAF in cros_ec_chardev
- Prevent build for big-endian systems as CHROME_PLATFORMS drivers
are only running and testing under little-endian systems
Cleanups:
- Drop some redundant bits in cros_kbd_led_backlight and Kconfig"
* tag 'chrome-platform-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Prevent build for big-endian systems
platform/chrome: Remove superfluous dependencies from CROS_EC
platform/chrome: cros_ec_chardev: Introduce rwsem for protecting ec_dev
platform/chrome: cros_ec_chardev: Add event relayer
platform/chrome: cros_ec_chardev: Move data to chardev_pdata
platform/chrome: cros_ec_chardev: Introduce chardev_data
platform/chrome: Use named initializers for struct i2c_device_id
platform/chrome: wilco_ec: event: Check ACPI_COMPANION()
platform/chrome: chromeos_tbmc: Check ACPI_COMPANION()
platform/chrome: chromeos_privacy_screen: Check ACPI_COMPANION()
platform/chrome: cros_kbd_led_backlight: Drop CONFIG_MFD_CROS_EC_DEV ifdeffery
platform/chrome: cros_kbd_led_backlight: Pass keyboard_led as parameter
platform/chrome: cros_kbd_led_backlight: Drop max_brightness from driver data
platform/chrome: Resolve kb_wake_angle visibility race
|
|
Commit 1cea5180f2f8 ("block: remove pktcdvd driver") left behind an export
that is now dead code. Remove it and move the declaration of
scsi_device_from_queue() to drivers/scsi/scsi_priv.h.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Link: https://patch.msgid.link/20260608-remove-pktcdvd-references-v4-1-72f88b04cc87@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in outstanding commits from 7.1 branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Preparatory work for MPAM counter assignment:
- Simplify the error handling path when creating monitor group event
configuration directories
- Make the MBM event filter configurable only on architectures that
support it and expose this with the respective file modes in the
event config
- Disallow the MBA software controller on systems where MBM counters
are assignable, as it requires continuous bandwidth measurement
that assignable counters do not guarantee
- Replace a compile-time Kconfig option for fixed counter assignment
with a per-architecture runtime property, and expose whether the
counter assignment mode is changeable to userspace
- Continue counter allocation across all domains instead of aborting
at the first failure
- Document that automatic MBM counter assignment is best effort and
may not assign counters to all domains
- Document the behavior of task ID 0 and idle tasks in the resctrl
tasks file"
* tag 'x86_cache_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Document tasks file behaviour for task id 0 and idle tasks
fs/resctrl: Document that automatic counter assignment is best effort
fs/resctrl: Continue counter allocation after failure
fs/resctrl: Add monitor property 'mbm_cntr_assign_fixed'
fs/resctrl: Disallow the software controller when MBM counters are assignable
x86,fs/resctrl: Create 'event_filter' files read only if they're not configurable
fs/resctrl: Tidy up the error path in resctrl_mkdir_event_configs()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Fix a malformed Kconfig default for the AMD Address Translation
Library
- Make sure i10nm loads successfully when the ADXL address decoder is
absent because former has decoding capabilities too
- Ensure error reporting is cleanly disabled on driver teardown and on
failed initialization for several legacy Intel EDAC drivers
- Fix a grammar issue in a diagnostic warning in the Sandy Bridge
driver
- Fix a missing resource release callback and incorrect memory topology
parsing in the igen6 driver, and add support for Intel Panther Lake-H
and Nova Lake-H SoCs
- Fix an out-of-bounds shift causing undefined behaviour in the Skylake
driver
- Consolidate memory controller register access helpers into shared
common code across the Intel Skylake, Ice Lake, and Meteor Lake
drivers
- Introduce sub-channel awareness and Rank Retry Logic improvements to
the Intel Skylake and i10nm drivers in preparation for Diamond Rapids
server support
- Add Rank Retry Logic support for Intel Diamond Rapids server to
imh_edac
- Make In-Band ECC detection registers configurable per SoC in the
igen6 driver
- Standardize PCI device ID table definitions across all EDAC drivers
to use named field initializers and standard PCI helper macros
* tag 'edac_updates_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras: (22 commits)
EDAC: Consistently define pci_device_ids using named initializers
EDAC/igen6: Add Intel Nova Lake-H SoC support
EDAC/igen6: Make registers for detecting IBECC configurable
EDAC/imh: Add RRL support for Intel Diamond Rapids server
EDAC/{skx_common,i10nm}: Prepare RRL for sub-channel granularity
EDAC/skx_common: Add SubChannel support to ADXL decode
EDAC/{skx_common,i10nm}: Move RRL handling to common code
EDAC/{skx_common,i10nm}: Introduce rrl_ctrl_mode
EDAC/{skx_common,i10nm}: Rename rrl_mode to rrl_source_type
EDAC/{skx_common,skx,i10nm}: Split skx_set_decode()
EDAC/{skx_common,i10nm,imh}: Move MC register access helpers to skx_common
EDAC/{skx_common,skx}: Fix UBSAN shift-out-of-bounds in skx_get_dimm_info
EDAC/igen6: Add one Intel Panther Lake-H SoC support
EDAC/igen6: Fix memory topology parsing for Panther Lake-H SoCs
EDAC/igen6: Fix call trace due to missing release()
EDAC/sb_edac: fix grammar in sb_decode_ddr3 warning
EDAC/i5400: disable error reporting at teardown and refactor helper
EDAC/i5100: disable error reporting at teardown and create helper
EDAC/i5000: disable error reporting at teardown and refactor helper
EDAC/i7300: disable error reporting if init fails and refactor helper
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Replace more deprecated functions by safer counterparts
- Switch Mac NuBus to a dynamic root device
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.2-tag1' of gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Correct CONFIG_MVME16x macro name in #endif comment
m68k: hash: Use lower_16_bits() helper
m68k: defconfig: Update defconfigs for v7.1-rc1
dio: Update DIO_SCMAX comment
dio: Use tabs and avoid continuation logging in dio_init
dio: Replace deprecated strcpy with strscpy in dio_init
nubus: Switch to dynamic root device
zorro: sysfs: Replace sprintf() by sysfs_emit()
|
|
Change the below internal static functions to APIs to allow new I3C hub
driver to use them
1) i3c_dev_enable_ibi_locked()
2) i3c_dev_disable_ibi_locked()
3) i3c_dev_request_ibi_locked()
4) i3c_dev_free_ibi_locked()
5) i3c_master_reattach_i3c_dev_locked()
Signed-off-by: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612111816.3688240-3-lakshay.piplani@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Currently sk_rethink_txhash() re-rolls the socket's txhash on RTO, PLB,
and spurious-retransmission events, but the cached route is reused and
the new hash is not propagated into the ECMP path selection logic. Two
changes are needed to make rehash select a different local ECMP path:
1. Add __sk_dst_reset() alongside sk_rethink_txhash() in
tcp_write_timeout(), tcp_rcv_spurious_retrans(), and
tcp_plb_check_rehash() so the cached dst is invalidated and the
next transmit triggers a fresh route lookup.
2. Set fl6->mp_hash from sk_txhash (or tcp_rsk(req)->txhash for
SYN/ACK retransmits and syncookies) in tcp_v6_connect(),
inet6_sk_rebuild_header(), inet6_csk_route_req(),
inet6_csk_route_socket(), tcp_v6_send_response(), and
cookie_v6_check() so fib6_select_path() picks a path based on the
new hash.
The mp_hash override only applies to fib_multipath_hash_policy 0 (the
default L3 policy). Its hash includes the flow label, but that is 0 by
default -- np->flow_label is unset, and auto_flowlabels only computes
the on-wire label later, per packet -- so flows to the same peer share
one local path. Keying the hash on sk_txhash makes the local path
per-connection and lets a rehash re-select it. Policies 1-3 are left
unchanged.
The mp_hash assignment is factored into a small helper,
ip6_ecmp_set_mp_hash(), shared by inet6_csk_route_req(),
inet6_csk_route_socket(), tcp_v6_connect(), inet6_sk_rebuild_header(),
tcp_v6_send_response(), and cookie_v6_check(). It applies
(txhash >> 1) ?: 1 for policy 0 (the >> 1 keeps mp_hash in the 31-bit
range; ?: 1 keeps it non-zero, since 0 would fall back to
rt6_multipath_hash()). inet6_csk_route_socket() calls it only for
sk_protocol == IPPROTO_TCP so that non-TCP callers (e.g., L2TP via
inet6_csk_xmit) fall through to rt6_multipath_hash() and retain their
existing flow-key-based ECMP behavior.
tcp_v6_send_response() also sets mp_hash from the response txhash so
that a control packet (a RST from the full socket, or an ACK from a
time-wait socket) selects the same local ECMP nexthop as the
connection's txhash rather than falling back to the flow hash. The
time-wait socket's tw_txhash is copied from sk_txhash when the
connection enters TIME_WAIT, so it reflects any rehash that occurred.
Setting mp_hash explicitly is necessary because the default ECMP hash
derives from fl6->flowlabel via np->flow_label, which is not updated
from sk_txhash (REPFLOW is off by default). ip6_make_flowlabel()
cannot help either, as it runs after the route lookup.
As a consequence, for policy 0 the local ECMP path of an IPv6 TCP
flow follows sk_txhash even when fl6->flowlabel is non-zero, e.g. a
reflected (REPFLOW) or explicitly set (IPV6_FLOWLABEL_MGR) flow
label. This is intentional: only local path selection changes, so
rehash can recover from a failed path; the on-wire flow label is
unchanged.
sk_set_txhash() is moved before ip6_dst_lookup_flow() in
tcp_v6_connect() so the initial ECMP path is selected by the same
txhash that subsequent route rebuilds will use. This avoids
unintended path changes when the cached dst is naturally invalidated
(e.g., by PMTU discovery or route changes).
The rehash sites (tcp_write_timeout(), tcp_plb_check_rehash(), and
tcp_rcv_spurious_retrans()) call __sk_rethink_txhash_reset_dst(),
which re-rolls the txhash and, when it changed, drops the cached dst
so the next transmit re-runs route selection. The dst reset is
guarded by sk->sk_family == AF_INET6 since IPv4 ECMP does not
currently use sk_txhash for path selection. For IPv4-mapped IPv6
sockets this produces a redundant dst reset on a cold path
(RTO/PLB); the subsequent IPv4 route lookup returns the same result.
The helper is deliberately separate from sk_rethink_txhash() itself:
dst_negative_advice() calls sk_rethink_txhash() before its own dst op,
so resetting the dst inside sk_rethink_txhash() would skip that op
(e.g. rt6_remove_exception_rt()).
For syncookies, cookie_init_sequence() computes the cookie value
before route_req() and sets txhash so the SYN-ACK selects the same
ECMP path that cookie_v6_check() will use when the full socket is
created. cookie_tcp_reqsk_init() derives txhash from the cookie so
the full socket's ECMP path matches the SYN-ACK. Both the SYN-ACK
assignment in tcp_conn_request() and the full-socket assignment in
cookie_tcp_reqsk_init() set txhash from the cookie for IPv4 and IPv6
alike. On IPv6 this drives ECMP path selection; on IPv4, which does
not use sk_txhash for ECMP, it only affects TX-queue selection. That
selection scales the hash by its high bits (reciprocal_scale()), which
are uniform in the keyed secure_tcp_syn_cookie() output -- the MSS index
only perturbs the low bits -- so the queue distribution matches
net_tx_rndhash().
cookie_init_sequence() is split from the former version that also
called tcp_synq_overflow() and incremented SYNCOOKIESSENT; those
side effects are now in cookie_record_sent(), called after
route_req() succeeds so they are not bumped when route_req() fails.
cookie_record_sent() is guarded by CONFIG_SYN_COOKIES to
match the guard on tcp_synq_overflow(). route_req() receives 0 as
tw_isn for the syncookie path so that tcp_v6_init_req() still saves
ireq->pktopts for REPFLOW flowlabel reflection and IPv6 cmsg
options. The ecn_ok clear for syncookies without timestamps stays
after tcp_ecn_create_request() so it takes precedence.
Signed-off-by: Neil Spring <ntspring@meta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260615042158.1600746-2-ntspring@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A comment in <net/sctp/sctp.h> incorrectly refers to
CONFIG_SCTP_DBG_OBJCOUNT instead of CONFIG_SCTP_DBG_OBJCNT. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260613233725.162470-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7fc ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement the DSA .port_vlan_add and .port_vlan_del operations to enable
VLAN-aware bridge offloading on the NETC switch.
VLAN membership is maintained in the VLAN Filter Table (VFT). Adding the
first port to a VLAN creates a new VFT entry with hardware MAC learning
and flood-on-miss forwarding; subsequent ports update the existing
entry's membership bitmap. Removing the last port deletes the entry.
Egress tagging is handled through the Egress Treatment Table (ETT). Each
VLAN is allocated a group of ETT entries, one per available port. Ports
are assigned a sequential ett_offset during initialisation, used to
address each port's entry within the group. Untagged ports configure the
ETT to strip the outer VLAN tag; tagged ports pass frames through
unmodified. Each ETT group is optionally paired with an Egress Counter
Table (ECT) group for per-port frame counting, allocated on a best-effort
basis. When the egress rule of an ETT entry changes, the counter of the
corresponding ECT entry will be recounted to track the number of frames
that match the new egress rule.
A software shadow list serialised by vft_lock tracks active VLAN state
across both port membership and egress tagging. VID 0 is used for single
port mode and is ignored by both callbacks.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-8-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NTMP index tables require software to allocate and manage entry IDs.
Add two bitmap helper functions to facilitate this management:
ntmp_lookup_free_eid(): finds the first zero bit in the given bitmap,
sets it to mark the entry as in-use, and returns the corresponding entry
ID. Returns NTMP_NULL_ENTRY_ID if no free entry is available.
ntmp_clear_eid_bitmap(): clears the bit associated with the given entry
ID in the bitmap to mark the entry as free. It is a no-op if the entry
ID is NTMP_NULL_ENTRY_ID.
Both functions are exported for use by other modules, such as the NETC
switch driver which needs to manage group index bitmaps for the Egress
Treatment Table (ETT) and Egress Count Table (ECT).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-7-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Egress Treatment Table (ETT) and Egress Count Table (ECT) are both
index tables whose entry IDs are allocated by software. Every num_ports
entries form a group, where each entry in the group corresponds to one
port. To facilitate group allocation and management, initialize the group
index bitmaps for both tables based on hardware capabilities reported by
ETTCAPR and ECTCAPR registers.
The bitmap size per table is calculated as the total number of hardware
entries divided by the number of available ports, which gives the number
of groups available for software allocation. A set bit in the bitmap
represents a group index that has been allocated.
These bitmaps will be used by subsequent patches that add VLAN support.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-6-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The egress count table is a static bounded index table, egress related
statistics are maintained in this table. The table is implemented as a
linear array of entries accessed using an index (0, 1, 2, ..., n) that
uniquely identifies an entry within the array. Egress Counter Entry ID
(EC_EID) is used as an index to an entry in this table. The EC_EID is
specified in the egress treatment table.
Egress count table entries are always present and enabled. The table
only supports access via entry ID, which is assigned by the software.
And it supports Update, Query and Query followed by Update operations.
Currently, only Update operation is supported.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-5-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each entry in the egress treatment table contains the egress packet
processing actions to be applied to a grouping or scope of packets
exiting on a particular egress port of the switch. A scope of packets,
for example, could be the packets exiting a particular VLAN, matching
a particular 802.1Q bridge forwarding entry or belonging to a stream
identified at ingress. The egress treatment table is implemented as a
linear array of entries accessed using an index (0,1, 2, ..., n) that
uniquely identifies an entry within the array.
The egress treatment table only supports access vid entry ID, which is
assigned by the software. It supports Add, Update, Delete and Query
operations. Note that only Query operation is not supported yet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-4-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add two interfaces to manage entries in the VLAN filter table:
ntmp_vft_update_entry(): Update the configuration element data of the
specified VLAN filter entry based on the given VLAN ID. It uses the
exact key access method to locate the entry.
ntmp_vft_delete_entry(): Delete the VLAN filter entry corresponding to
the specified VLAN ID. It also uses the exact key access method to
identify the target entry.
In addition, introduce struct vft_req_qd to describe the request data
buffer format for Query and Delete actions of the VLAN filter table,
which contains a common request data header and a VLAN access key.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-3-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add three interfaces to manage dynamic entries in the FDB table:
ntmp_fdbt_update_activity_element(): Update the activity element of all
dynamic FDB entries. For each entry, if its activity flag is not set,
which means no packet has matched this entry since the last update, the
activity counter is incremented. Otherwise, both the activity flag and
activity counter are reset. The activity counter is used to track how
long an FDB entry has been inactive, which is useful for implementing
an ageing mechanism.
ntmp_fdbt_delete_ageing_entries(): Delete all dynamic FDB entries whose
activity flag is not set and whose activity counter is greater than or
equal to the specified threshold. This is used to remove stale entries
that have been inactive for too long.
ntmp_fdbt_delete_port_dynamic_entries(): Delete all dynamic FDB entries
associated with the specified switch port. This is typically called when
a port goes down or is removed from a bridge.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-2-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next.
More specifically, this contains conncount rework to address AI related
reports, assorted Netfiter updates and two small incremental updates on
IPVS:
1) Replace old obsolete workqueues (system_wq, system_unbound_wq)
in IPVS, from Marco Crivellari.
2) Replace WARN_ON{_ONCE} by DEBUG_NET_WARN_ON_ONCE in nf_tables.
In the recent years, reporters say that the use of WARN_ON{_ONCE}
in conjunction with panic_on_warn=1 results in DoS. Let's replace
it by DEBUG_NET_WARN_ON_ONCE so this is only exercised by test
infrastructure and fuzzers, while also providing context to AI
agents. From Fernando F. Mancera.
Five patches from Florian Westphal to address AI reports in the conncount
infrastructures:
3) Fix missing rcu read lock section when calling
__ovs_ct_limit_get_zone_limit().
4) Add a dedicate lock per rbtree tree, this increases memory
usage but it should improve scalability.
5) Add a helper function to find the rbtree node, no functional
changes are intented.
6) Add sequence counter to detect concurrent tree modifications
and retry lookups.
7) Add locks to GC conncount walk and address other nitpicks.
Then, several assorted updates:
8) Defensive Tree-wide addition of NULL checks for ct extensions.
9) Bail out if flowtable bypass cannot be fully set up from the
flow offload expression, instead of lazy building a likely
incomplete one.
10) Fix documentation for the new conn_max sysctl toggle in IPVS.
11) Add nf_dev_xmit_recursion*() helpers and use them, to address
recent AI reports.
* tag 'nf-next-26-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
ipvs: fix doc syntax for conn_max sysctl
netfilter: flowtable: bail out if forward path cannot be discovered
netfilter: conntrack: check NULL when retrieving ct extension
netfilter: nf_conncount: gc and rcu fixes
netfilter: nf_conncount: add sequence counter to detect tree modifications
netfilter: nf_conncount: split count_tree_node rbtree walk into helper
netfilter: nf_conncount: use per nf_conncount_data spinlocks
netfilter: nf_conncount: callers must hold rcu read lock
netfilter: nf_tables: use DEBUG_NET_WARN_ON_ONCE in packet and control paths
ipvs: Replace use of system_unbound_wq with system_dfl_long_wq
====================
Link: https://patch.msgid.link/20260614114605.474783-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds observability for the io_uring zcrx rx-buf-len configuration.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
|
|
The former s390 specific arch_cpu_idle_time() implementation was
removed, since its implementation was racy and reported idle time
could go backwards [1].
However this removal was not necessary, since independently of the s390
architecture specific races there exists the iowait counter update race,
which can also lead to reported idle time going backwards [2].
With Frederic Weisbecker's recent cpu idle time accounting refactoring
kernel_cpustat got a sequence counter. Use this to implement s390 specific
variants of kcpustat_field_idle() and kcpustat_field_iowait(). This is
logically a revert of [1] and moves cpu idle time accounting back into s390
architecture code, which is also more precise than the dyntick idle time
accounting by nohz/scheduler.
For comparing cross cpu time stamps it is necessary to use the stcke
instead of the stckf instruction in irq entry path. Furthermore this
open-codes a sequence lock in assembler and C code, which is required to
update the irq entry time stamp to the per cpu idle_data structure in a
race free manner.
[1] commit be76ea614460 ("s390/idle: remove arch_cpu_idle_time() and corresponding code")
[2] commit ead70b752373 ("timers/nohz: Add a comment about broken iowait counter update race")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
KVM/riscv changes for 7.2
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
|
|
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.]
Cc: stable@vger.kernel.org # v5.10+
Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys")
Reported-by: Shaomin Chen <eeesssooo020@gmail.com>
Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TPM_DEBUG, and other similar flags, are a non-standard way to specify a
feature in Linux kernel. Introduce CONFIG_TRUSTED_KEYS_DEBUG for trusted
keys, and use it to replace these ad-hoc feature flags.
Given that trusted keys debug dumps can contain sensitive data, harden the
feature as follows:
1. In the Kconfig description postulate that pr_debug() statements must be
used.
2. Use pr_debug() statements in TPM 1.x driver to print the protocol dump.
3. Require trusted.debug=1 on the kernel command line (default: 0) to
activate dumps at runtime, even when CONFIG_TRUSTED_KEYS_DEBUG=y.
Traces, when actually needed, can be easily enabled by providing
trusted.dyndbg='+p' and trusted.debug=1 in the kernel command-line.
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Closes: https://lore.kernel.org/all/7f8b8478-5cd8-4d97-bfd0-341fd5cf10f9@linux.ibm.com/
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Srish Srinivasan <ssrish@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This fixe does page cache invalidation after DIO and async DIO writes for
both O_DIRECT and FOPEN_DIRECT_IO cases.
Commit b359af8275a9 ("fuse: Invalidate the page cache after FOPEN_DIRECT_IO
write") fixed xfstests generic/209 for DIO writes in the FOPEN_DIRECT_IO
path. DIO writes without FOPEN_DIRECT_IO are already handled by
generic_file_direct_write().
However, async DIO writes (xfstests generic/451) remain unhandled.
After this fix:
- Async write with FUSE_ASYNC_DIO:
invalidate in fuse_aio_invalidate_worker()
- Otherwise (Sync or async write without FUSE_ASYNC_DIO):
- With FOPEN_DIRECT_IO:
invalidate in fuse_direct_write_iter()
- Without FOPEN_DIRECT_IO:
invalidate in generic_file_direct_write()
Workqueue is required for async write invalidation to prevent deadlock:
calling it directly in the I/O end routine (which is in fuse worker thread
context) can block on a folio lock held by a buffered I/O thread waiting
for the same fuse worker thread.
Co-developed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Cheng Ding <cding@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
interface"
This reverts commit 47d7bca76dd4f36ba0525d761f247c76ec9e4b17, which was
merged by accident.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The two flags are added internally so there's no point for warning if
they are passed by the caller as well, so allow them. This will allow
simplifying obj_ext allocation under kmalloc_nolock().
Also it's not necessary to have the extra alloc_gfp variable for adding
the two flags. The original gfp_flags parameter is not used anywhere
except for the warning. So remove alloc_gfp and directly modify and use
gfp_flags everywhere.
Link: https://patch.msgid.link/20260610-slab_alloc_flags-v2-13-7190909db118@kernel.org
Reviewed-by: Hao Li <hao.li@linux.dev>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4fba ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb9755 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real, by
Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect to the
clearing of the robust_list_head::list_op_pending pointer because
unlock and clearing the pointer are not atomic.
The race window is between the unlock and clearing the pending op
pointer. If the task is forced to exit in this window, exit will
access a potentially invalid pending op pointer when cleaning up
the robust list.
That happens if another task manages to unmap the object
containing the lock before the cleanup, which results in an UAF.
In the worst case this UAF can lead to memory corruption when
unrelated content has been mapped to the same address by the time
the access happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'. (Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards (Dmitry
Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex state on
PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards (Aniket
Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead (Dmitry
Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks such as
mutexes, percpu-rwsems, rtmutexes, rwsems and semaphores (Dmitry
Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG, Fabricio Parra,
Dmitry Ilvokhin and Peter Zijlstra"
* tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (36 commits)
locking: Add contended_release tracepoint to sleepable locks
locking/percpu-rwsem: Extract __percpu_up_read()
tracing/lock: Remove unnecessary linux/sched.h include
futex: Optimize futex hash bucket access patterns
rust: sync: completion: Mark inline complete_all and wait_for_completion
MAINTAINERS: Add RUST [SYNC] entry
cleanup: Specify nonnull argument index
selftests: futex: Add tests for robust release operations
Documentation: futex: Add a note about robust list race condition
x86/vdso: Implement __vdso_futex_robust_try_unlock()
x86/vdso: Prepare for robust futex unlock support
futex: Provide infrastructure to plug the non contended robust futex unlock race
futex: Add robust futex unlock IP range
futex: Add support for unlocking robust futexes
futex: Cleanup UAPI defines
x86: Select ARCH_MEMORY_ORDER_TSO
uaccess: Provide unsafe_atomic_store_release_user()
futex: Provide UABI defines for robust list entry modifiers
futex: Move futex related mm_struct data into a struct
futex: Make futex_mm_init() void
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting
the remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
* tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY
MIPS: VDSO: Gate microMIPS restriction on GCC version
MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY
clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available
MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available
MIPS: VDSO: Only map the data pages when the vDSO is used
MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY
vdso/datastore: Always provide symbol declarations
MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block
vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data()
vdso/treewide: Drop GENERIC_TIME_VSYSCALL
vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY
riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Thomas Gleixner:
- Fix a long standing TOCTOU in get_cpu_sleep_time_us()
- Make the CPU offline NOHZ handling more robust by disabling NOHZ on
the outgoing CPU early instead of creating unneeded state which needs
to be undone.
- Unify idle CPU time accounting instead of having two different
accounting mechanisms. These two different mechanisms are not really
independent, but the different properties can in the worst case cause
that gloabl idle time can be observed going backwards.
- Consolidate the idle/iowait time retrieval interfaces instead of
converting back and forth between them.
- Make idle interrupt time accounting more robust. The original code
assumes that interrupt time accouting is enabled and therefore stops
elapsing idle time while an interrupt is handled in NOHZ dyntick
state. That assumption is not correct as interrupt time accounting
can be disabled at compile and runtime.
- Fix an accounting error between dyntick idle time and dyntick idle
steal time. The stolen time is not accounted and therefore idle time
becomes inaccurate. The stolen time is now accounted after the fact
as there is no way to predict the steal time upfront.
* tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Handle dyntick-idle steal time correctly
sched/cputime: Handle idle irqtime gracefully
sched/cputime: Provide get_cpu_[idle|iowait]_time_us() off-case
tick/sched: Consolidate idle time fetching APIs
tick/sched: Account tickless idle cputime only when tick is stopped
tick/sched: Remove unused fields
tick/sched: Move dyntick-idle cputime accounting to cputime code
tick/sched: Remove nohz disabled special case in cputime fetch
tick/sched: Unify idle cputime accounting
s390/time: Prepare to stop elapsing in dynticks-idle
powerpc/time: Prepare to stop elapsing in dynticks-idle
sched/cputime: Correctly support generic vtime idle time
sched/cputime: Remove superfluous and error prone kcpustat_field() parameter
sched/idle: Handle offlining first in idle loop
tick/sched: Fix TOCTOU in nohz idle time fetch
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core subsystem:
- Harden the user space controllable hrtimer interfaces further to
protect against unpriviledged DoS attempts by arming timers in the
past.
- Add per-capacity hierarchies to the timer migration code to prevent
timer migration accross different capacity domains. This code has
been disabled last minute as there is a pathological problem with
SoCs which advertise a larger number of capacity domains. The
problem is under investigation and the code won't be active before
v7.3, but that turned out to be less intrusive than a full revert
as it preserves the preparatory steps and allows people to work on
the final resolution
- Export time namespace functionality as a recent user can be built
as a module.
- Initialize the jiffies clocksource before using it. The recent
hardening against time moving backward requires that the related
members of struct clocksource have been initialized, otherwise it
clamps the readout to 0, which makes time stand sill and causes
boot delays.
- Fix a more than twenty year old PID reference count leak in an
error path of the POSIX CPU timer code.
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'timers-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (31 commits)
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
time/jiffies: Register jiffies clocksource before usage
timers/migration: Temporarily disable per capacity hierarchies
timers/migration: Turn tmigr_hierarchy level_list into a flexible array
timers/migration: Deactivate per-capacity hierarchies under nohz_full
timers/migration: Fix hotplug migrator selection target on asymetric capacity machines
ntsync: Honour caller's time namespace for absolute MONOTONIC timeouts
time/namespace: Export init_time_ns and do_timens_ktime_to_host()
timers/migration: Update stale @online doc to @available
timers: Fix flseep() typo in kernel-doc comment
hrtimer: Fix the bogus return type of __hrtimer_start_range_ns()
hrtimer: Return ktime_t from hrtimer_get_next_event()/hrtimer_next_event_without()
clocksource: Clean up clocksource_update_freq() functions
alarmtimer: Remove stale return description from alarm_handle_timer()
selftests/posix_timers: Use CLOCK_THREAD_CPUTIME_ID for ITIMER_PROF measurements
scripts/timers: Add timer_migration_tree.py
timers/migration: Handle capacity in connect tracepoints
timers/migration: Split per-capacity hierarchies
timers/migration: Track CPUs in a hierarchy
timers/migration: Abstract out hierarchy to prepare for CPU capacity awareness
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource/clockevent drivers:
- Add devm helpers for clocksources, which allows to simplify driver
teardown and probe failure handling.
- More module conversion work
- Update the support for the ARM EL2 virtual timer including the
required ACPI changes.
- Add clockevent and clocksource support for the TI Dual Mode Timer
- Fix the support for multiple watchdog instances in the TEGRA186
driver
- Add D1 timer support to the SUN5I driver
- The usual devicetree updates, cleanups and small fixes all over the
place"
* tag 'timers-clocksource-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource: move NXP timer selection to drivers/clocksource
clocksource/drivers/timer-tegra186: Reserve and service a kernel watchdog
clocksource/drivers/timer-tegra186: Register all accessible watchdog timers
clocksource/drivers/timer-tegra186: Correct num_wdts for Tegra186 and Tegra234
clocksource/drivers/timer-tegra186: Fix support for multiple watchdog instances
clocksource/drivers/timer-ti-dm: Add clockevent support
clocksource/drivers/timer-ti-dm: Add clocksource support
clocksource/drivers/timer-ti-dm: Fix property name in comment
dt-bindings: timer: arm,arch_timer: Fix requirements for interrupt description
clocksource/drivers/arm_arch_timer: Default to EL2 virtual timer when running VHE
ACPI: GTDT: Parse information related to the EL2 virtual timer
ACPI: GTDT: Account for GTDTv3 size when walking the platform timer descriptors
clocksource: Add devm_clocksource_register_*() helpers
clocksource/drivers/sun5i: Add D1 hstimer support
dt-bindings: timer: allwinner,sun5i-a13-hstimer: add H616 and D1
dt-bindings: timer: Add StarFive JHB100 clint
dt-bindings: timer: renesas,rz-mtu3: document RZ/{T2H,N2H}
dt-bindings: timer: renesas,rz-mtu3: Remove TCIU8 interrupt
dt-bindings: timer: Remove sifive,fine-ctr-bits property
clocksource/drivers/timer-of: Make the code compatible with modules
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull smp core updates from Thomas Gleixner:
"Two small updates to the SMP/hotplug subsystem:
- Add cpuhplock.h to the maintained files
- Provide the missing stubs for lockdep_is_cpus_held() and
lockdep_is_cpus_write_held() so the usage sites can be simplified"
* tag 'smp-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
cpu: Add lockdep_is_cpus_held()/lockdep_is_cpus_write_held() stubs for !CONFIG_HOTPLUG_CPU
MAINTAINERS: Add include/linux/cpuhplock.h to CPU HOTPLUG area
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull MSI irq update from Thomas Gleixner:
"A trivial update to the MSI interrupt subsystem, which fixes a couple
of typos"
* tag 'irq-msi-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Fix typos in msi_domain_ops comment
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Replace the support for the AST2700-A0 early silicon with a proper
driver for the final A2 production silicon
- Rename and rework the StarFive JH8100 interrupt controller for the
new JHB100 SoC as JH8100 was discontinued before production.
- Add support for Amlogic A9 SoCs to the meson-gpio interrupt
controller
- Expand the Econet interrupt controller driver to support MIPS 34Kc
Vectored External Interrupt Controller mode.
- Prevent a NULL pointer dereference in the GICv4 code as the vLPI code
blindly assumes that the ITS was populated. Add the missing sanity
check.
- Add support for software triggered and for error interrupts to the
Renesas RZ/T2H driver.
- Add interrupt redirection support for the loongarch architecture.
- Add multicore support to the Realtek RTL interrupt driver
- The usual updates, enhancements and fixes all over the place
* tag 'irq-drivers-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/irq-realtek-rtl: Add multicore support
irqchip/irq-realtek-rtl: Add/simplify register helpers
irqchip/loongarch-ir: Add IR (interrupt redirection) irqchip support
irqchip/loongarch-avec: Return IRQ_SET_MASK_OK_DONE when keep affinity
irqchip/loongarch-avec: Prepare for interrupt redirection support
Docs/LoongArch: Add advanced extended IRQ model
irqchip/qcom-pdc: Use FIELD_GET() to extract bank index and bit position
irqchip/qcom-pdc: Add PDC_VERSION() macro to describe version register fields
irqchip/qcom-pdc: Tighten ioremap clamp to single DRV region size
irqchip/qcom-pdc: Split __pdc_enable_intr() into per-version helpers
irqchip/exynos-combiner: Remove useless spinlock
irqchip/renesas-rzt2h: Add error interrupts support
irqchip/renesas-rzt2h: Add software-triggered interrupts support
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
irqchip/gic-v3-its: Use FIELD_MODIFY()
irqchip/econet-en751221: Support MIPS 34Kc VEIC mode
dt-bindings: interrupt-controller: econet: Add CPU interrupt mapping
irqchip/meson-gpio: Add support for Amlogic A9 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream version
20260408, introduce support for devres-based management of ACPI notify
handlers and update some core ACPI device drivers on top of that
(which includes some fixes and cleanups), add _DEP support for PCI/CXL
roots and Intel CVS devices, fix a couple of assorted issues and clean
up code:
- Fix multiple issues related to probe, removal and missing NVDIMM
device notifications in the ACPI NFIT driver (Rafael Wysocki)
- Add support for devres-based management of ACPI notify handlers to
the ACPI core (Rafael Wysocki)
- Switch multiple core ACPI device drivers (including the ACPI PAD,
ACPI video bus, ACPI HED, ACPI thermal zone, ACPI AC, ACPI battery,
and ACPI NFIT drivers) over to using devres-based resource
management during probe (Rafael Wysocki)
- Replace mutex_lock/unlock() with guard()/scoped_guard() in the ACPI
PMIC driver (Maxwell Doose)
- Fix message kref handling in the dead device path of the ACPI IPMI
address space handler (Yuho Choi)
- Use sysfs_emit() in idlecpus_show() in the ACPI processor
aggregator device (PAD) driver (Yury Norov)
- Clean up device_id_scheme initialization in the ACPI video bus
driver (Jean-Ralph Aviles)
- Clean up lid handling in the ACPI button driver and
acpi_button_probe(), reorganize installing and removing event
handlers in that driver and switch it over to using devres-based
resource management during probe (Rafael Wysocki)
- Add support for the Legacy Virtual Register (LVR) field in I2C
serial bus resource descriptors to ACPICA (Akhil R)
- Fix multiple issues related to bounds checks, input validation,
use-after-free, and integer overflow checks in the AML interpreter
in ACPICA (ikaros)
- Update the copyright year to 2026 in ACPICA files and make minor
changes related to ACPI 6.6 support (Pawel Chmielewski)
- Remove spurious precision from format used to dump parse trees in
ACPICA (David Laight)
- Add modern standby DSM GUIDs to ACPICA header files (Daniel
Schaefer)
- Fix FADT 32/64X length mismatch warning in ACPICA (Abdelkader
Boudih)
- Update D3hot/cold device power states definitions in ACPICA header
files (Aymeric Wibo)
- Fix NULL pointer dereference in acpi_ns_custom_package() (Weiming
Shi)
- Update ACPICA version to 20260408 (Saket Dumbre)
- Add cpuidle driver check in acpi_processor_register_idle_driver()
to avoid evaluating _CST unnecessarily (Tony W Wang-oc)
- Suppress UBSAN warning caused by field misuse during PCC-based
register access in the ACPI CPPC library (Jeremy Linton)
- Add support for CPPC v4 to the ACPI CPPC library (Sumit Gupta)
- Update the ACPI device enumeration code to honor _DEP for ACPI0016
PCI/CXL host bridges and make the ACPI PCI root driver clear _DEP
dependencies for PCI roots that have become operational (Chen Pei)"
* tag 'acpi-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()
ACPI: IPMI: Fix message kref handling on dead device
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
ACPI: scan: Honor _DEP for Intel CVS devices
ACPI: NFIT: core: Fix possible deadlock and missing notifications
ACPI: NFIT: core: Eliminate redundant local variable
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
ACPI: NFIT: core: Fix possible NULL pointer dereference
ACPI: bus: Clean up devm_acpi_install_notify_handler()
ACPI: button: Switch over to devres-based resource management
ACPI: button: Reorganize installing and removing event handlers
ACPI: button: Use string literals for generating netlink messages
ACPI: button: Clean up adding and removing lid procfs interface
ACPI: button: Merge two switch () statements in acpi_button_probe()
ACPI: button: Drop redundant variable from acpi_button_probe()
ACPI: button: Rework device verification during probe
ACPI: CPPC: Add support for CPPC v4
ACPI: PAD: Use sysfs_emit() in idlecpus_show()
ACPI: scan: Honor _DEP for ACPI0016 PCI/CXL host bridge
ACPI: PCI: Clear _DEP dependencies after PCI root bridge attach
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Uladzislau Rezki:
"Torture test updates:
- Improve kvm-series.sh script by adding examples in its header
comment
- Lazy RCU is more fully tested now by replacing call_rcu_hurry()
with call_rcu() and doing rcu_barrier() to motivate lazy callbacks
during a stutter pause
- Add more synonyms for the "--do-normal" group of torture.sh
command-line arguments
Misc changes:
- Reduce stack usage of nocb_gp_wait() to address frame size warning
when built with CONFIG_UBSAN_ALIGNMENT
- The synchronize_rcu() call can detect the flood and latches a
normal/default path temporary switching to wait_rcu_gp() path
- Document using rcu_access_pointer() to fetch the old pointer for
lockless cmpxchg() updates
- Simplify some RCU code using clamp_val()
- Fix a kerneldoc header comment typo in srcu_down_read_fast()"
* tag 'rcu.release.v7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: reduce stack usage in nocb_gp_wait()
rcu-tasks: Fix possible boot-time tests failed for the call_rcu_tasks()
rcu: Latch normal synchronize_rcu() path on flood
rcu: Document rcu_access_pointer() feeding into cmpxchg()
rcu: Simplify param_set_next_fqs_jiffies() by applying clamp_val()
rcu: Simplify rcu_do_batch() by applying clamp()
checkpatch: Undeprecate rcu_read_lock_trace() and rcu_read_unlock_trace()
srcu: Fix kerneldoc header comment typo in srcu_down_read_fast()
torture: Allow "norm" abbreviation for "normal"
torture: Improve kvm-series.sh header comment
torture: Add torture_sched_set_normal() for user-specified nice values
rcutorture: Fully test lazy RCU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux
Pull KCSAN update from Marco Elver:
- Silence -Wmaybe-uninitialized when calling __kcsan_check_access()
* tag 'kcsan-20260612-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux:
kcsan: Silence -Wmaybe-uninitialized when calling __kcsan_check_access()
|
|
Allow uprobe_multi link to identify the target binary by an already
opened file descriptor.
Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for
the attr.link_create.uprobe_multi struct.
When the flag is set, we resolve the target from path_fd, without the
flag, we keep the existing string path behavior.
I don't see a use case for supporting O_PATH file descriptors, because
we need to read the binary first to get probes offsets, so I'm using
the CLASS(fd, f), which fails for O_PATH fds.
Assisted-by: Codex:GPT-5.4
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- Several small cleanups of various Xen related drivers
(xen/platform-pci, xen-balloon, xenbus, xen/mcelog)
- Cleanup for Xen PV-mode related code (includes dropping the Xen
debugfs code)
- Drop the additional lazy mmu mode tracking done by Xen specific code
* tag 'for-linus-7.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: Replace strcpy() with memcpy()
x86/xen: Replace generic lazy tracking with cpu specific one
x86/xen: Get rid of last XEN_LAZY_MMU uses
mm: Refactor lazy_mmu_mode_pause() and lazy_mmu_mode_resume()
x86/xen: Change interface of xen_mc_issue()
x86/xen: Drop lazy mode from trace entries
x86/xen: Remove Xen debugfs support
x86/xen: Cleanup Xen related trace points
x86/xen: Guard PV-only stuff in xen-ops.h with CONFIG_XEN_PV
xen: balloon: Replace sprintf() with sysfs_emit()
xen/mcelog: mark g_physinfo, ncpus and xen_mce_chrdev_device as __ro_after_init
xen: constify xsd_errors array
xen/platform-pci: Simplify initialization of pci_device_id array
|
