| Age | Commit message (Collapse) | Author |
|---|
|
SRC and OBJ are both set to $(pwd) and are always identical. The script
already enforces that klp-build runs from the kernel root directory, and
builds are done in-place, making these variables unnecessary.
Suggested-by: Song Liu <song@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Print the full objtool command line when '--verbose' is given to help
with debugging.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Realmode code is compiled as a separate 16-bit binary and embedded into
the kernel image via rmpiggy.S. It can't be livepatched.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
vDSO code runs in userspace and can't be livepatched. Such patches also
cause spurious "new function" errors due to generated files like
vdso*-image.c having unstable line numbers across builds.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
If a build error occurs and the user hits Ctrl-C while a large patch is
being reverted during cleanup, the cleanup EXIT trap gets re-triggered
and tries to re-revert the already partially-reverted patch. That
causes 'patch -R' to repeatedly prompt
"Unreversed patch detected! Ignore -R? [n]"
for each already-reverted hunk, with no way to break out.
Fix it by adding '--force' to the patch revert command in
revert_patch(), which causes it to silently ignore already-reverted
hunks. And ignore errors, as the cleanup is always best-effort.
For similar reasons, add to APPLIED_PATCHES before (rather than after)
applying the patch in apply_patch() so an interrupted apply will also
get cleaned up.
Fixes: d36a7343f4ba ("livepatch/klp-build: switch to GNU patch and recountdiff")
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
When a patch applies with fuzz, the detailed output from the patch tool
can be very noisy, especially for big patches.
Suppress the fuzz details by default, while keeping the "applied with
fuzz" warning. The noise can be restored with '--verbose'.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Make sure all patch files actually exist. Otherwise there can be
confusing errors later.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The errtrace option (combined with the ERR trap) already serves the same
function (and more) as errexit, so errexit is redundant. And it has
more pitfalls. Remove it.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The klp-build -f/--show-first-changed feature uses diff to compare
checksum log lines between original and patched objects. However, diff
compares entire lines, including the offset field. When a function is
at a different section offset, the offset field differs even though the
instruction checksum is identical, causing the wrong instruction to be
printed.
Only compare the checksum field when looking for the first changed
instruction. Also print both the original and patched offsets when they
differ.
Fixes: 78be9facfb5e ("livepatch/klp-build: Add --show-first-changed option to show function divergence")
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
If .config is out of date with the kernel source, 'make syncconfig'
hangs while waiting for user input on new config options. Detect the
mismatch and return an error.
Fixes: 6f93f7b06810 ("livepatch/klp-build: Fix inconsistent kernel version")
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Some architectures link libgcc.a from the toolchain into the kernel.
gen_compile_commands trie to read the kbuild .cmd files of its
constituent object files, which are not available.
Flat out ignore libgcc.a, as it is not built as part of the kernel
anyways.
Link: https://lore.kernel.org/r/20260427-kunit-or1k-v1-1-9d3109e991e8@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In conf_askvalue(), the 'def' argument (retrieved via sym_get_string_value)
can be NULL. While current call sites ensure that 'def' is valid,
calling printf("%s\n", def) is technically undefined behavior and could
lead to a segmentation fault on certain libc implementations if the
function were called with a NULL pointer in the future.
Improve the robustness of conf_askvalue() by providing an empty string
as a fallback.
Additionally, remove the redundant re-initialization of the 'line'
buffer inside the !sym_is_changeable(sym) block, as it is already
properly initialized at the function entry.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xingjing Deng <micro6947@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260306021709.27068-1-micro6947@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Commit 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled
and pahole supports it") in 2020 introduced CONFIG_DEBUG_INFO_BTF_MODULES
to enable generation of split BTF for kernel modules. This change required
the %.ko Makefile rule to additionally depend on vmlinux, which is used as
a base for deduplication. The regular ld_ko_o command executed by the rule
was then modified to be skipped if only vmlinux changes. This was done by
introducing a new if_changed_except command and updating the original call
to '+$(call if_changed_except,ld_ko_o,vmlinux)'.
Later, commit 214c0eea43b2 ("kbuild: add $(objtree)/ prefix to some
in-kernel build artifacts") in 2024 updated the rule's reference to vmlinux
from 'vmlinux' to '$(objtree)/vmlinux'. This accidentally broke the
previous logic to skip relinking modules if only vmlinux changes. The issue
is that '$(objtree)' is typically '.' and GNU Make normalizes the resulting
prerequisite './vmlinux' to just 'vmlinux', while the exclusion logic
retains the raw './vmlinux'. As a result, if_changed_except doesn't
correctly filter out vmlinux. Consequently, with
CONFIG_DEBUG_INFO_BTF_MODULES=y, modules are relinked even if only vmlinux
changes.
It is possible to fix this Makefile issue. However, having the %.ko rule
update the resulting file in place without starting from the original
inputs is rather fragile. The logic is harder to debug if something breaks
during a subsequent .ko update because the old input is lost due to the
overwrite. Additionally, it requires that the BTF processing is idempotent.
For example, sorting id+flags BTF_SET8 pairs in .BTF_ids by resolve_btfids
currently doesn't have this property.
One option is to split the %.ko target into two rules: the first for
partial linking and the second one for generating the BTF data. However,
this approach runs into an issue with requiring additional intermediate
files, which increases the size of the build directory. On my system, when
using a large distribution config with ~5500 modules, the size of the build
directory with debuginfo enabled is already ~25 GB, with .ko files
occupying ~8 GB. Duplicating these .ko files doesn't seem practical.
Measuring the speed of the %.ko processing shows that the link step is
actually relatively fast. It takes about 20% of the overall rule time,
while the BTF processing accounts for 80%. Moreover, skipping the link part
becomes relevant only during local development. In such cases, developers
typically use configs that enable a limited number of modules, so having
the %.ko rule slightly slower doesn't significantly impact the total
rebuild time. This is supported by the fact that no one has complained
about this optimization being broken for the past two years.
Therefore, remove the logic that prevents module relinking when only
vmlinux changes and simplify Makefile.modfinal.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/20260410131343.2519532-1-petr.pavlu@suse.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The kernel maintains a table of minimum expected microcode revisions for
Intel CPUs in intel-ucode-defs.h. Systems with microcode older than
these revisions are flagged with X86_BUG_OLD_MICROCODE.
The static list of microcode revisions needs to be updated periodically
in response to releases of the official microcode at:
https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files.git.
Introduce a simple script to extract the revision information from the
microcode files and print it in the precise format expected by the
microcode header.
Maintaining the script in the kernel tree ensures a central location
that a submitter can use to generate the kernel-specific update. This
not only reduces the possibility of errors but also makes it easier to
validate the changes for reviewers and maintainers.
Typically, someone at Intel would see a new public release, wait for at
least three months to ensure the update is stable, run this script to
refresh the intel-ucode-defs.h file, and send a patch upstream to update
the mainline and stable versions.
Having a standard update script and a defined process minimizes the
ambiguity when refreshing the old microcode list. As always, there can
be exceptions to this process which should be supported with appropriate
justification.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260407014226.1169040-3-sohil.mehta@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX update from Greg KH:
"Here is a single SPDX-like change for 7.1-rc1. It explicitly allows
the use of SPDX-FileCopyrightText which has been used already in many
files.
At the same time, update checkpatch to catch any "non allowed" spdx
identifiers as we don't want to go overboard here.
This has been in linux-next for a long time with no reported problems"
* tag 'spdx-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: Explicitly allow SPDX-FileCopyrightText
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- A fix to make modules on 32-bit parisc architecture work again
- Drop ip_fast_csum() inline assembly to avoid unaligned memory
accesses
- Allow to build kernel without 32-bit VDSO
- Reference leak fix in error path in LED driver
* tag 'parisc-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: fix reference leak on failed device registration
module.lds.S: Fix modules on 32-bit parisc architecture
parisc: Allow to build without VDSO32
parisc: Include 32-bit VDSO only when building for 32-bit or compat mode
parisc: Allow to disable COMPAT mode on 64-bit kernel
parisc: Fix default stack size when COMPAT=n
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
parisc: is_compat_task() shall return false for COMPAT=n
parisc: Avoid compat syscalls when COMPAT=n
parisc: _llseek syscall is only available for 32-bit userspace
parisc: Drop ip_fast_csum() inline assembly implementation
parisc: update outdated comments for renamed ccio_alloc_consistent()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Cleanup of the reserved memory code to keep CMA specifics in CMA
code
- Add and convert several users to new of_machine_get_match() helper
- Validate nul termination in string properties
- Update dtc to upstream v1.7.2-69-g53373d135579
- Limit matching reserved memory devices to /reserved-memory nodes
- Fix some UAF in unittests
- Remove Baikal SoC bus driver
- Fix false DT_SPLIT_BINDING_PATCH checkpatch warning
- Allow fw_devlink device-tree on x86
- Fix kerneldoc return description for of_property_count_elems_of_size()
DT bindings:
- Add fsl,imx25-aips, fsl,imx25-tcq, qcom,eliza-pdc,
qcom,eliza-spmi-pmic-arb, qcom,hawi-imem, qcom,milos-imem,
qcom,hawi-pdc, and lg,sw49410 bindings
- Convert arm,vexpress-scc to DT schema
- Deprecate Qualcomm generic CPU compatibles. Add Apple M3 CPU cores.
- Move some dual-link display panels to the dual-link schema
- Drop mux controller node name constraints
- Remove Baikal SoC bus bindings
- Fix a false warning in the thermal trip node binding"
* tag 'devicetree-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: display: panel: panel-simple: Add lg,sw49410 compatible
dt-bindings: display: ti, am65x-dss: Fix AM62L DSS reg and clock constraints
dt-bindings: display: simple: Move Innolux G156HCE-L01 panel to dual-link
dt-bindings: display: simple: Move AUO 21.5" FHD to dual-link
dt-bindings: thermal: Fix false warning with 'phandle' in trips nodes
of: unittest: fix use-after-free in testdrv_probe()
of: unittest: fix use-after-free in of_unittest_changeset()
dt-bindings: qcom,pdc: document the Hawi Power Domain Controller
dt-bindings: ARM: arm,vexpress-scc: convert to DT schema
drivers/of: fdt: validate flat DT string properties before string use
drivers/of: fdt: validate stdout-path properties before parsing them
dt-bindings: sram: Document qcom,hawi-imem compatible
dt-bindings: sram: Allow multiple-word prefixes to sram subnode
dt-bindings: sram: Document qcom,milos-imem
scripts/dtc: Update to upstream version v1.7.2-69-g53373d135579
of: property: Allow fw_devlink device-tree on x86
dt-bindings: arm: cpus: Add Apple M3 CPU core compatibles
dt-bindings: display: lt8912b: Drop redundant endpoint properties
dt-bindings: opp-v2: Fix example 3 CPU reg value
dt-bindings: connector: add pd-disable dependency
...
|
|
On the 32-bit parisc architecture, we always used the
-ffunction-sections compiler option to tell the compiler to put the
functions into seperate text sections. This is necessary, otherwise
"big" kernel modules like ext4 or ipv6 fail to load because some
branches won't be able to reach their stubs.
Commit 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related
macros") broke this for parisc because all text sections will get
unconditionally merged now.
Introduce the ARCH_WANTS_MODULES_TEXT_SECTIONS config option which
avoids the text section merge for modules, and fix this issue by
enabling this option by default for 32-bit parisc.
Fixes: 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org # v6.19+
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
|
Limit checkpatch warnings for normally-const structs by excluding patterns
consistent with forward declarations.
For example, the forward declaration `struct regmap_access_table;` in a
header file currently generates a warning recommending that it is
generally declared as const; however, this would apply a useless type
qualifier in the empty declaration `const struct regmap_access_table;`,
and subsequently generate compiler warnings.
Link: https://lkml.kernel.org/r/20260331181509.1258693-1-tknelms@google.com
Signed-off-by: Taylor Nelms <tknelms@google.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- KLP support updates and fixes (Song Liu)
- KLP-build script updates and fixes (Joe Lawrence)
- Support Clang RAX DRAP sequence, to address clang false positive
(Josh Poimboeuf)
- Reorder ORC register numbering to match regular x86 register
numbering (Josh Poimboeuf)
- Misc cleanups (Wentong Tian, Song Liu)
* tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Reorder ORC register numbering
objtool: Support Clang RAX DRAP sequence
livepatch/klp-build: report patch validation fuzz
livepatch/klp-build: add terminal color output
livepatch/klp-build: provide friendlier error messages
livepatch/klp-build: improve short-circuit validation
livepatch/klp-build: fix shellcheck complaints
livepatch/klp-build: add Makefile with check target
livepatch/klp-build: add grep-override function
livepatch/klp-build: switch to GNU patch and recountdiff
livepatch/klp-build: support patches that add/remove files
objtool/klp: Correlate locals to globals
objtool/klp: Match symbols based on demangled_name for global variables
objtool/klp: Remove .llvm suffix in demangle_name()
objtool/klp: Also demangle global objects
objtool/klp: Use sym->demangled_name for symbol_name hash
objtool/klp: Remove trailing '_' in demangle_name()
objtool/klp: Remove redundant strcmp() in correlate_symbols()
objtool: Use section/symbol type helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Add killable flavor to guard definitions (Davidlohr Bueso)
- Remove the list_head from struct mutex (Matthew Wilcox)
- Rename mutex_init_lockep() (Davidlohr Bueso)
rwsems:
- Remove the list_head from struct rw_semaphore and
replace it with a single pointer (Matthew Wilcox)
- Fix logic error in rwsem_del_waiter() (Andrei Vagin)
Semaphores:
- Remove the list_head from struct semaphore (Matthew Wilcox)
Jump labels:
- Use ATOMIC_INIT() for initialization of .enabled (Thomas Weißschuh)
- Remove workaround for old compilers in initializations
(Thomas Weißschuh)
Lock context analysis changes and improvements:
- Add context analysis for rwsems (Peter Zijlstra)
- Fix rwlock and spinlock lock context annotations (Bart Van Assche)
- Fix rwlock support in <linux/spinlock_up.h> (Bart Van Assche)
- Add lock context annotations in the spinlock implementation
(Bart Van Assche)
- signal: Fix the lock_task_sighand() annotation (Bart Van Assche)
- ww-mutex: Fix the ww_acquire_ctx function annotations
(Bart Van Assche)
- Add lock context support in do_raw_{read,write}_trylock()
(Bart Van Assche)
- arm64, compiler-context-analysis: Permit alias analysis through
__READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- Add __cond_releases() (Peter Zijlstra)
- Add context analysis for mutexes (Peter Zijlstra)
- Add context analysis for rtmutexes (Peter Zijlstra)
- Convert futexes to compiler context analysis (Peter Zijlstra)
Rust integration updates:
- Add atomic fetch_sub() implementation (Andreas Hindborg)
- Refactor various rust_helper_ methods for expansion (Boqun Feng)
- Add Atomic<*{mut,const} T> support (Boqun Feng)
- Add atomic operation helpers over raw pointers (Boqun Feng)
- Add performance-optimal Flag type for atomic booleans, to avoid
slow byte-sized RMWs on architectures that don't support them.
(FUJITA Tomonori)
- Misc cleanups and fixes (Andreas Hindborg, Boqun Feng, FUJITA
Tomonori)
LTO support updates:
- arm64: Optimize __READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- compiler: Simplify generic RELOC_HIDE() (Marco Elver)
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
|
|
Pull documentation updates from Jonathan Corbet:
"A busier cycle than I had expected for docs, including:
- Translations: some overdue updates to the Japanese translations,
Chinese translations for some of the Rust documentation, and the
beginnings of a Portuguese translation.
- New documents covering CPU isolation, managed interrupts, debugging
Python gbb scripts, and more.
- More tooling work from Mauro, reducing docs-build warnings, adding
self tests, improving man-page output, bringing in a proper C
tokenizer to replace (some of) the mess of kernel-doc regexes, and
more.
- Update and synchronize changes.rst and scripts/ver_linux, and put
both into alphabetical order.
... and a long list of documentation updates, typo fixes, and general
improvements"
* tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (162 commits)
Documentation: core-api: real-time: correct spelling
doc: Add CPU Isolation documentation
Documentation: Add managed interrupts
Documentation: seq_file: drop 2.6 reference
docs/zh_CN: update rust/index.rst translation
docs/zh_CN: update rust/quick-start.rst translation
docs/zh_CN: update rust/coding-guidelines.rst translation
docs/zh_CN: update rust/arch-support.rst translation
docs/zh_CN: sync process/2.Process.rst with English version
docs/zh_CN: fix an inconsistent statement in dev-tools/testing-overview
tracing: Documentation: Update histogram-design.rst for fn() handling
docs: sysctl: Add documentation for /proc/sys/xen/
Docs: hid: intel-ish-hid: make long URL usable
Documentation/kernel-parameters: fix architecture alignment for pt, nopt, and nobypass
sched/doc: Update yield_task description in sched-design-CFS
Documentation/rtla: Convert links to RST format
docs: fix typos and duplicated words across documentation
docs: fix typo in zoran driver documentation
docs: add an Assisted-by mention to submitting-patches.rst
Revert "scripts/checkpatch: add Assisted-by: tag validation"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
|
|
Commit e2c318225ac1 ("kbuild: deb-pkg: add
pkg.linux-upstream.nokernelheaders build profile") changed how
install-extmod-build gets called, making it always rebuild the host
programs below scripts/ if HOSTCC wasn't specified with its full triplet
on the make command line. That is, apparently, needed to fix up commit
f1d87664b82a ("kbuild: cross-compile linux-headers package when
possible") for cross-compiles. However, in the much more common case of
non-cross-compile builds this will lead to unnecessary rebuilding of
host tools including gcc plugins. This, in turn, will lead to a full
kernel rebuild on the next 'make bindeb-pkg' which is unfortunate.
Avoid that by only triggering the rebuild of host tools for actual
cross-compile builds.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Fixes: e2c318225ac1 ("kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260402145116.1010901-1-minipli@grsecurity.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Bump the minimum Rust version to 1.85.0 (and 'bindgen' to 0.71.1).
As proposed in LPC 2025 and the Maintainers Summit [1], we are
going to follow Debian Stable's Rust versions as our minimum
versions.
Debian Trixie was released on 2025-08-09 with a Rust 1.85.0 and
'bindgen' 0.71.1 toolchain, which is a fair amount of time for e.g.
kernel developers to upgrade.
Other major distributions support a Rust version that is high
enough as well, including:
+ Arch Linux.
+ Fedora Linux.
+ Gentoo Linux.
+ Nix.
+ openSUSE Slowroll and openSUSE Tumbleweed.
+ Ubuntu 25.10 and 26.04 LTS. In addition, 24.04 LTS using
their versioned packages.
The merged patch series comes with the associated cleanups and
simplifications treewide that can be performed thanks to both
bumps, as well as documentation updates.
In addition, start using 'bindgen''s '--with-attribute-custom-enum'
feature to set the 'cfi_encoding' attribute for the 'lru_status'
enum used in Binder.
Link: https://lwn.net/Articles/1050174/ [1]
- Add experimental Kconfig option ('CONFIG_RUST_INLINE_HELPERS') that
inlines C helpers into Rust.
Essentially, it performs a step similar to LTO, but just for the
helpers, i.e. very local and fast.
It relies on 'llvm-link' and its '--internalize' flag, and requires
a compatible LLVM between Clang and 'rustc' (i.e. same major
version, 'CONFIG_RUSTC_CLANG_LLVM_COMPATIBLE'). It is only enabled
for two architectures for now.
The result is a measurable speedup in different workloads that
different users have tested. For instance, for the null block
driver, it amounts to a 2%.
- Support global per-version flags.
While we already have per-version flags in many places, we didn't
have a place to set global ones that depend on the compiler
version, i.e. in 'rust_common_flags', which sometimes is needed to
e.g. tweak the lints set per version.
Use that to allow the 'clippy::precedence' lint for Rust < 1.86.0,
since it had a change in behavior.
- Support overriding the crate name and apply it to Rust Binder,
which wanted the module to be called 'rust_binder'.
- Add the remaining '__rust_helper' annotations (started in the
previous cycle).
'kernel' crate:
- Introduce the 'const_assert!' macro: a more powerful version of
'static_assert!' that can refer to generics inside functions or
implementation bodies, e.g.:
fn f<const N: usize>() {
const_assert!(N > 1);
}
fn g<T>() {
const_assert!(size_of::<T>() > 0, "T cannot be ZST");
}
In addition, reorganize our set of build-time assertion macros
('{build,const,static_assert}!') to live in the 'build_assert'
module.
Finally, improve the docs as well to clarify how these are
different from one another and how to pick the right one to use,
and their equivalence (if any) to the existing C ones for extra
clarity.
- 'sizes' module: add 'SizeConstants' trait.
This gives us typed 'SZ_*' constants (avoiding casts) for use in
device address spaces where the address width depends on the
hardware (e.g. 32-bit MMIO windows, 64-bit GPU framebuffers, etc.),
e.g.:
let gpu_heap = 14 * u64::SZ_1M;
let mmio_window = u32::SZ_16M;
- 'clk' module: implement 'Send' and 'Sync' for 'Clk' and thus
simplify the users in Tyr and PWM.
- 'ptr' module: add 'const_align_up'.
- 'str' module: improve the documentation of the 'c_str!' macro to
explain that one should only use it for non-literal cases (for the
other case we instead use C string literals, e.g. 'c"abc"').
- Disallow the use of 'CStr::{as_ptr,from_ptr}' and clean one such
use in the 'task' module.
- 'sync' module: finish the move of 'ARef' and 'AlwaysRefCounted'
outside of the 'types' module, i.e. update the last remaining
instances and finally remove the re-exports.
- 'error' module: clarify that 'from_err_ptr' can return 'Ok(NULL)',
including runtime-tested examples.
The intention is to hopefully prevent UB that assumes the result of
the function is not 'NULL' if successful. This originated from a
case of UB I noticed in 'regulator' that created a 'NonNull' on it.
Timekeeping:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
'pin-init' crate:
- Replace the 'Zeroable' impls for 'Option<NonZero*>' with impls of
'ZeroableOption' for 'NonZero*'.
- Improve feature gate handling for unstable features.
- Declutter the documentation of implementations of 'Zeroable' for
tuples.
- Replace uses of 'addr_of[_mut]!' with '&raw [mut]'.
rust-analyzer:
- Add type annotations to 'generate_rust_analyzer.py'.
- Add support for scripts written in Rust ('generate_rust_target.rs',
'rustdoc_test_builder.rs', 'rustdoc_test_gen.rs').
- Refactor 'generate_rust_analyzer.py' to explicitly identify host
and target crates, improve readability, and reduce duplication.
And some other fixes, cleanups and improvements"
* tag 'rust-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (79 commits)
rust: sizes: add SizeConstants trait for device address space constants
rust: kernel: update `file_with_nul` comment
rust: kbuild: allow `clippy::precedence` for Rust < 1.86.0
rust: kbuild: support global per-version flags
rust: declare cfi_encoding for lru_status
docs: rust: general-information: use real example
docs: rust: general-information: simplify Kconfig example
docs: rust: quick-start: remove GDB/Binutils mention
docs: rust: quick-start: remove Nix "unstable channel" note
docs: rust: quick-start: remove Gentoo "testing" note
docs: rust: quick-start: add Ubuntu 26.04 LTS and remove subsection title
docs: rust: quick-start: update minimum Ubuntu version
docs: rust: quick-start: update Ubuntu versioned packages
docs: rust: quick-start: openSUSE provides `rust-src` package nowadays
rust: kbuild: remove "dummy parameter" workaround for `bindgen` < 0.71.1
rust: kbuild: update `bindgen --rust-target` version and replace comment
rust: rust_is_available: remove warning for `bindgen` < 0.69.5 && libclang >= 19.1
rust: rust_is_available: remove warning for `bindgen` 0.66.[01]
rust: bump `bindgen` minimum supported version to 0.71.1 (Debian Trixie)
rust: block: update `const_refs_to_static` MSRV TODO comment
...
|
|
to resolve the conflict with urgent fixes.
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg:
- Expand the example section in the 'HrTimer' documentation.
- Mark the 'ClockSource' trait as unsafe to ensure valid values for
'ktime_get()'.
- Add 'Delta::from_nanos()'.
This is a back merge since the pull request has a newer base -- we will
avoid that in the future.
And, given it is a back merge, it happens to resolve the "subtle" conflict
around '--remap-path-{prefix,scope}' that I discussed in linux-next [1],
plus a few other common conflicts. The result matches what we did for
next-20260407.
The actual diffstat (i.e. using a temporary merge of upstream first) is:
rust/kernel/time.rs | 32 ++++-
rust/kernel/time/hrtimer.rs | 336 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 362 insertions(+), 6 deletions(-)
Link: https://lore.kernel.org/linux-next/CANiq72kdxB=W3_CV1U44oOK3SssztPo2wLDZt6LP94TEO+Kj4g@mail.gmail.com/ [1]
* tag 'rust-timekeeping-for-v7.1' of https://github.com/Rust-for-Linux/linux:
hrtimer: add usage examples to documentation
rust: time: make ClockSource unsafe trait
rust/time: Add Delta::from_nanos()
|
|
This adds the following commits from upstream:
53373d135579 dtc: Remove unused dts_version in dtc-lexer.l
caf7465c5d60 libfdt: fdt_check_full: Handle FDT_NOP when FDT_END is expected
5976c4a66098 libfdt: fdt_rw: Introduce fdt_downgrade_version()
5bb5bedd347d fdtdump: Return an error code on wrong tag value
68b960e299f7 fdtdump: Remove dtb version check
adba02caf554 dtc: Use a consistent type for basenamelen
8d15a63e84ff libfdt: Verify alignment of sub-blocks in dtb
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Until the version bump of `bindgen`, we needed to pass a dummy parameter
to avoid failing the `--version` call.
Thus remove it.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-22-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
>= 19.1
It is not possible anymore to fall into the issue that this warning was
alerting about given the `bindgen` version bump.
Thus simplify by removing the machinery behind it, including tests.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-20-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It is not possible anymore to fall into the issue that this warning was
alerting about given the `bindgen` version bump.
Thus simplify by removing the machinery behind it, including tests.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-19-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
As proposed in the past in e.g. LPC 2025 and the Maintainers Summit [1],
we are going to follow Debian Stable's `bindgen` versions as our minimum
supported version.
Debian Trixie was released with `bindgen` 0.71.1, which it still uses
to this day [2].
Debian Trixie's release happened on 2025-08-09 [3], which means that a
fair amount of time has passed since its release for kernel developers
to upgrade.
Thus bump the minimum to the new version.
Then, in later commits, clean up most of the workarounds and other bits
that this upgrade of the minimum allows us.
Ubuntu 25.10 also has a recent enough `bindgen` [4] (even the already
unsupported Ubuntu 25.04 had it), and they also provide versioned packages
with `bindgen` 0.71.1 back to Ubuntu 24.04 LTS [5].
Link: https://lwn.net/Articles/1050174/ [1]
Link: https://packages.debian.org/trixie/bindgen [2]
Link: https://www.debian.org/releases/trixie/ [3]
Link: https://packages.ubuntu.com/search?suite=all&searchon=names&keywords=bindgen [4]
Link: https://launchpad.net/ubuntu/+source/rust-bindgen-0.71 [5]
Acked-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that the Rust minimum version is 1.85.0, there is no need to enable
certain features that are stable.
Thus clean them up.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
As proposed in the past in e.g. LPC 2025 and the Maintainers Summit [1],
we are going to follow Debian Stable's Rust versions as our minimum
supported version.
Debian Trixie was released with a Rust 1.85.0 toolchain [2], which it
still uses to this day [3] (i.e. no update to Rust 1.85.1).
Debian Trixie's release happened on 2025-08-09 [4], which means that a
fair amount of time has passed since its release for kernel developers
to upgrade.
Thus bump the minimum to the new version.
Then, in later commits, clean up most of the workarounds and other bits
that this upgrade of the minimum allows us.
pin-init was left as-is since the patches come from upstream. And the
vendored crates are unmodified, since we do not want to change those.
Note that the minimum LLVM major version for Rust 1.85.0 is LLVM 18 (the
Rust upstream binaries use LLVM 19.1.7), thus e.g. `RUSTC_LLVM_VERSION`
tests can also be updated, but there are no suitable ones to simplify.
Ubuntu 25.10 also has a recent enough Rust toolchain [5], and they also
provide versioned packages with a Rust 1.85.1 toolchain even back to
Ubuntu 22.04 LTS [6].
Link: https://lwn.net/Articles/1050174/ [1]
Link: https://www.debian.org/releases/trixie/release-notes/whats-new.en.html#desktops-and-well-known-packages [2]
Link: https://packages.debian.org/trixie/rustc [3]
Link: https://www.debian.org/releases/trixie/ [4]
Link: https://packages.ubuntu.com/search?suite=all&searchon=names&keywords=rustc [5]
Link: https://launchpad.net/ubuntu/+source/rustc-1.85 [6]
Acked-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Benno Lossin <lossin@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260405235309.418950-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Commit 6a859f1a19d1 ("powerpc: unify two CONFIG_POWERPC64_CPU entries
in the same choice block") removed the only occurrence of this tricky
use case.
Disallow this pattern in choice_check_sanity() and revert commit
4d46b5b623e0 ("kconfig: fix infinite loop in sym_calc_choice()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260330115736.1559962-1-masahiroy@kernel.org
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Currently checksyscalls.sh is unconditionally executed during each build.
Most of these executions are unnecessary.
Only run checksyscalls.sh if one of its inputs have changed.
This new logic does not work for the multiple invocations done for MIPS.
The effect is that checksyscalls.sh is still executed unconditionally.
However this is not worse than before.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260402-kbuild-missing-syscalls-v3-2-6641be1de2db@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Make sure that a failure of any intermediate step also fails the
overall execution.
Link: https://sashiko.dev/#/patchset/20260402-kbuild-missing-syscalls-v3-0-6641be1de2db%40weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260404-checksyscalls-set-e-v1-1-206400e78668@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
An upcoming patch will need to reuse this path.
Move it into a reusable variable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260402-kbuild-missing-syscalls-v3-1-6641be1de2db@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Minor conflict in kernel/bpf/verifier.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently you cannot filter out the crate-name argument
RUSTFLAGS_REMOVE_stem.o because the Rust filter-out invocation does not
include that particular argument. Since --crate-name is an argument that
can't be passed multiple times, this means that it's currently not
possible to override the crate name. Thus, remove the --crate-name
argument for drivers. This allows them to override the crate name using
the #![crate_name] annotation.
This affects symbol names, but has no effect on the filenames of object
files and other things generated by the build, as we always use --emit
with a fixed output filename.
The --crate-name argument is kept for the crates under rust/ for
simplicity and to avoid changing many of them by adding #![crate_name].
The rust analyzer script is updated to use rustc to obtain the crate
name of the driver crates, which picks up the right name whether it is
configured via #![crate_name] or not. For readability, the logic to
invoke 'rustc' is extracted to its own function.
Note that the crate name in the python script is not actually that
important - the only place where the name actually affects anything is
in the 'deps' array which specifies an index and name for each
dependency, and determines what that dependency is called in *this*
crate. (The same crate may be called different things in each
dependency.) Since driver crates are leaf crates, this doesn't apply and
the rustc invocation only affects the 'display_name' parameter.
Acked-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jesung Yang <y.jems.n@gmail.com>
Acked-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260402-binder-crate-name-v4-1-ec3919b87909@google.com
[ Applied Python type hints. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Many architectures which do generate build IDs are missing from this
list. For example arm64, riscv, loongarch, mips.
Now that errors from readelf and binaries without any build ID are
handled gracefully, the allow-list is not necessary anymore, drop it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260331-kbuild-vdso-install-v2-4-606d0dc6beca@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
If the vDSO does not contain a build ID, skip the symlink step.
This will allow the removal of the explicit list of architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260331-kbuild-vdso-install-v2-3-606d0dc6beca@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
If 'readelf -n' encounters a note it does not recognize it emits a
warning. This for example happens when inspecting a compat vDSO for
which the main kernel toolchain was not used.
However the relevant build ID note is always readable, so the
warnings are pointless.
Hide the warnings to make it possible to extract build IDs for more
architectures in the future.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260331-kbuild-vdso-install-v2-2-606d0dc6beca@weissschuh.net
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
