| Age | Commit message (Collapse) | Author |
|---|
|
CONFIG_DAMON_DEBUG_SANITY is recommended for DAMON development and test
setups. Enable it on the build config for DAMON selftests.
Link: https://lkml.kernel.org/r/20260306152914.86303-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we have helpers which test singular VMA flags - vma_flags_test() and
vma_desc_test() - add a test to explicitly assert that these behave as
expected.
[ljs@kernel.org: test_vma_flags_test(): use struct initializer, per David]
Link: https://lkml.kernel.org/r/f6f396d2-1ba2-426f-b756-d8cc5985cc7c@lucifer.local
Link: https://lkml.kernel.org/r/376a39eb9e134d2c8ab10e32720dd292970b080a.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to vma_flags_test(), we have previously renamed vma_desc_test() to
vma_desc_test_any(). Now that is in place, we can reintroduce
vma_desc_test() to explicitly check for a single VMA flag.
As with vma_flags_test(), this is useful as often flag tests are against a
single flag, and vma_desc_test_any(flags, VMA_READ_BIT) reads oddly and
potentially causes confusion.
As with vma_flags_test() a combination of sparse and vma_flags_t being a
struct means that users cannot misuse this function without it getting
flagged.
Also update the VMA tests to reflect this change.
Link: https://lkml.kernel.org/r/3a65ca23defb05060333f0586428fe279a484564.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since we've now renamed vma_flags_test() to vma_flags_test_any() to be
very clear as to what we are in fact testing, we now have the opportunity
to bring vma_flags_test() back, but for explicitly testing a single VMA
flag.
This is useful, as often flag tests are against a single flag, and
vma_flags_test_any(flags, VMA_READ_BIT) reads oddly and potentially causes
confusion.
We use sparse to enforce that users won't accidentally pass vm_flags_t to
this function without it being flagged so this should make it harder to
get this wrong.
Of course, passing vma_flags_t to the function is impossible, as it is a
struct.
Also update the VMA tests to reflect this change.
Link: https://lkml.kernel.org/r/f33f8d7f16c3f3d286a1dc2cba12c23683073134.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Be explicit about __mk_vma_flags() (which is used by the mk_vma_flags()
macro) always being inline, as we rely on the compiler to evaluate the
loop in this function and determine that it can replace the code with the
an equivalent constant value, e.g. that:
__mk_vma_flags(2, (const vma_flag_t []){ VMA_WRITE_BIT, VMA_EXEC_BIT });
Can be replaced with:
(1UL << VMA_WRITE_BIT) | (1UL << VMA_EXEC_BIT)
= (1UL << 1) | (1UL << 2) = 6
Most likely an 'inline' will suffice for this, but be explicit as we can
be.
Also update all of the functions __mk_vma_flags() ultimately invokes to be
always inline too.
Note that test_bitmap_const_eval() asserts that the relevant bitmap
functions result in build time constant values.
Additionally, vma_flag_set() operates on a vma_flags_t type, so it is
inconsistently named versus other VMA flags functions.
We only use vma_flag_set() in __mk_vma_flags() so we don't need to worry
about its new name being rather cumbersome, so rename it to
vma_flags_set_flag() to disambiguate it from vma_flags_set().
Also update the VMA test headers to reflect the changes.
Link: https://lkml.kernel.org/r/241f49c52074d436edbb9c6a6662a8dc142a8f43.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
erofs and zonefs are using vma_desc_test_any() twice to check whether all
of VMA_SHARED_BIT and VMA_MAYWRITE_BIT are set, this is silly, so add
vma_desc_test_all() to test all flags and update erofs and zonefs to use
it.
While we're here, update the helper function comments to be more
consistent.
Also add the same to the VMA test headers.
Link: https://lkml.kernel.org/r/568c8f8d6a84ff64014f997517cba7a629f7eed6.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: vma flag tweaks".
The ongoing work around introducing non-system word VMA flags has
introduced a number of helper functions and macros to make life easier
when working with these flags and to make conversions from the legacy use
of VM_xxx flags more straightforward.
This series improves these to reduce confusion as to what they do and to
improve consistency and readability.
Firstly the series renames vma_flags_test() to vma_flags_test_any() to
make it abundantly clear that this function tests whether any of the flags
are set (as opposed to vma_flags_test_all()).
It then renames vma_desc_test_flags() to vma_desc_test_any() for the same
reason. Note that we drop the 'flags' suffix here, as
vma_desc_test_any_flags() would be cumbersome and 'test' implies a flag
test.
Similarly, we rename vma_test_all_flags() to vma_test_all() for
consistency.
Next, we have a couple of instances (erofs, zonefs) where we are now
testing for vma_desc_test_any(desc, VMA_SHARED_BIT) &&
vma_desc_test_any(desc, VMA_MAYWRITE_BIT).
This is silly, so this series introduces vma_desc_test_all() so these
callers can instead invoke vma_desc_test_all(desc, VMA_SHARED_BIT,
VMA_MAYWRITE_BIT).
We then observe that quite a few instances of vma_flags_test_any() and
vma_desc_test_any() are in fact only testing against a single flag.
Using the _any() variant here is just confusing - 'any' of single item
reads strangely and is liable to cause confusion.
So in these instances the series reintroduces vma_flags_test() and
vma_desc_test() as helpers which test against a single flag.
The fact that vma_flags_t is a struct and that vma_flag_t utilises sparse
to avoid confusion with vm_flags_t makes it impossible for a user to
misuse these helpers without it getting flagged somewhere.
The series also updates __mk_vma_flags() and functions invoked by it to
explicitly mark them always inline to match expectation and to be
consistent with other VMA flag helpers.
It also renames vma_flag_set() to vma_flags_set_flag() (a function only
used by __mk_vma_flags()) to be consistent with other VMA flag helpers.
Finally it updates the VMA tests for each of these changes, and introduces
explicit tests for vma_flags_test() and vma_desc_test() to assert that
they behave as expected.
This patch (of 6):
On reflection, it's confusing to have vma_flags_test() and
vma_desc_test_flags() test whether any comma-separated VMA flag bit is
set, while also having vma_flags_test_all() and vma_test_all_flags()
separately test whether all flags are set.
Firstly, rename vma_flags_test() to vma_flags_test_any() to eliminate this
confusion.
Secondly, since the VMA descriptor flag functions are becoming rather
cumbersome, prefer vma_desc_test*() to vma_desc_test_flags*(), and also
rename vma_desc_test_flags() to vma_desc_test_any().
Finally, rename vma_test_all_flags() to vma_test_all() to keep the
VMA-specific helper consistent with the VMA descriptor naming convention
and to help avoid confusion vs. vma_flags_test_all().
While we're here, also update whitespace to be consistent in helper
functions.
Link: https://lkml.kernel.org/r/cover.1772704455.git.ljs@kernel.org
Link: https://lkml.kernel.org/r/0f9cb3c511c478344fac0b3b3b0300bb95be95e9.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Eliminate the `kho_finalize()` function and its associated state from the
KHO subsystem. The transition to a radix tree for memory tracking makes
the explicit "finalize" state and its serialization step obsolete.
Remove the `kho_finalize()` and `kho_finalized()` APIs and their stub
implementations. Update KHO client code and the debugfs interface to no
longer call or depend on the `kho_finalize()` mechanism.
Complete the move towards a stateless KHO, simplifying the overall design
by removing unnecessary state management.
Link: https://lkml.kernel.org/r/20260206021428.3386442-3-jasonmiu@google.com
Signed-off-by: Jason Miu <jasonmiu@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove duplicate inclusion of unistd.h in memory-failure.c to clean up
redundant code.
Link: https://lkml.kernel.org/r/20260211064311.2981726-1-nichen@iscas.ac.cn
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test_zswap_incompressible() to verify that the zswap_incomp memcg stat
correctly tracks incompressible pages.
The test allocates memory filled with random data from /dev/urandom, which
cannot be effectively compressed by zswap. When this data is swapped out
to zswap, it should be stored as-is and tracked by the zswap_incomp
counter.
The test verifies that:
1. Pages are swapped out to zswap (zswpout increases)
2. Incompressible pages are tracked (zswap_incomp increases)
test:
dd if=/dev/zero of=/swapfile bs=1M count=2048
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile
echo Y > /sys/module/zswap/parameters/enabled
./test_zswap
TAP version 13
1..8
ok 1 test_zswap_usage
ok 2 test_swapin_nozswap
ok 3 test_zswapin
ok 4 test_zswap_writeback_enabled
ok 5 test_zswap_writeback_disabled
ok 6 test_no_kmem_bypass
ok 7 test_no_invasive_cgroup_shrink
ok 8 test_zswap_incompressible
Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20260213071827.5688-3-jiayuan.chen@linux.dev
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, the migration test asserts that numa_available() returns 0. On
systems where NUMA is not available (returning -1), such as certain ARM64
configurations or single-node systems, this assertion fails and crashes
the test.
Update the test to check the return value of numa_available(). If it is
less than 0, skip the test gracefully instead of failing.
This aligns the behavior with other MM selftests (like rmap) that skip
when NUMA support is missing.
Link: https://lkml.kernel.org/r/20260218163941.13499-1-anishm7030@gmail.com
Fixes: 0c2d08728470 ("mm: add selftests for migration entries")
Signed-off-by: AnishMulay <anishm7030@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Sayali Patil <sayalip@linux.ibm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of using the maple big node, use the maple copy node for reduced
stack usage and aligning with mas_wr_rebalance() and
mas_wr_spanning_store().
Splitting a node is similar to rebalancing, but a new evaluation of when
to ascend is needed. The only other difference is that the data is pushed
and never rebalanced at each level.
The testing must also align with the changes to this commit to ensure the
test suite continues to pass.
Link: https://lkml.kernel.org/r/20260130205935.2559335-27-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During the big node removal, an incorrect rebalance step went too far up
the tree causing insufficient nodes. Test the faulty condition by
recreating the scenario in the userspace testing.
Link: https://lkml.kernel.org/r/20260130205935.2559335-24-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Stop using the maple subtree state and big node in favour of using three
destinations in the maple copy node. That is, expand the way leaves were
handled to all levels of the tree and use the maple copy node to track the
new nodes.
Extract out the sibling init into the data calculation since this is where
the insufficient data can be detected. The remainder of the sibling code
to shift the next iteration is moved to the spanning_ascend() function,
since it is not always needed.
Next introduce the dst_setup() function which will decide how many nodes
are needed to contain the data at this level. Using the destination
count, populate the copy node's dst array with the new nodes and set
d_count to the correct value. Note that this can be tricky in the case of
a leaf node with exactly enough room because of the rule against NULLs at
the end of leaves.
Once the destinations are ready, copy the data by altering the
cp_data_write() function to copy from the sources to the destinations
directly. This eliminates the use of the big node in this code path. On
node completion, node_finalise() will zero out the remaining area and set
the metadata, if necessary.
spanning_ascend() is used to decide if the operation is complete. It may
create a new root, converge into one destination, or continue upwards by
ascending the left and right write maple states.
One test case setup needed to be tweaked so that the targeted node was
surrounded by full nodes.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20260130205935.2559335-18-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Spanning store had some corner cases which showed up during rcu stress
testing. Add explicit tests for those cases.
At the same time add some locking for easier visibility of the rcu stress
testing. Only a single dump of the tree will happen on the first detected
issue instead of flooding the console with output.
Link: https://lkml.kernel.org/r/20260130205935.2559335-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrew Ballance <andrewjballance@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This version includes the following changes:
- Setting current base frequency as maximum for SST-BF with
kernel QOS changes
- Harmonize extended family decoded with the rest of the kernel
- Minor changes for error codes and messages
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
CLX platforms
When running intel-speed-select on unsupported CLX platforms, it prints
intel-speed-select: Invalid CPU model (85)
: Success
Because this is not a system error and errno is not set.
Replace err() with exit().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
version is detected
When running an old version intel-speed-select tool on newer platforms,
even with "intel-speed-select -v", the tool only complains about
"Incompatible API version", without giving the current version info.
Print Version info whenever Incompatible API version is detected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
When running the "intel-speed-select -h" command, it returns
1. 0 when using a version that is API incompatible.
2. 1 when using a version that is API compatible.
And this is confusing.
Fix the program to return 0 for "-h" parameter, and return 1 whenever
"Incompatible API versions" is detected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
When decode and use CPU extended family ID in intel-speed-select, there
are several potential issues,
1. Mask with 0x0f to get CPU extended family ID is bogus because
CPU extended family ID takes 8 bits (bit 27:20).
2. Use CPU extended family ID fields without checking CPU family ID is
risky. Because Intel SDM says, "The Extended Family ID needs to be
examined only when the Family ID is 0FH."
3. Saving cpu family ID and cpu extended family ID separately doesn't
align with Linux kernel. And it may bring extra complexity when
making family specific changes in the future.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
SST-PP level change results in online/offline of CPUs with -o option.
The Linux intel-pstate driver internally stores the current HWP_REQ MSR
value during offline and restores them during online.
It is possible that during SST-PP level change, the new HWP_CAP limits
can be updated. So, when a CPU is online, the HWP_REQ MSR should be
updated to new values based on HWP_CAP values.
This is particularly problematic when either turbo is disabled or the
current HWP_REQ value (stored before online) is less than the base
frequency from the updated HWP_CAP MSR guaranteed value. If the HWP_REQ
MSR is not updated, then the performance will be limited to the value
before perf level change.
Hence the tool updates cpufreq scaling_max_freq to the newer
base_frequency value in this case. This step is not required when HWP
interrupts are enabled, as the perf level change should result in a new
interrupt with HWP_GUARANTEED_PERF_CHANGE_STATUS and the intel_pstate
driver will update to new limits.
But the tool needs to handle the case when HWP interrupts are not
enabled but there is no way for the tool to know that HWP interrupts are
enabled or not. So, it has to still update the scaling_max_freq.
With the QOS changes in the kernel, user space writes to scaling_max_freq
are treated as hard limits. So, when base frequency is increased with
SST-BF enabled, the cpufreq subsystem will still not allow setting to the
SST-BF high priority core frequency. So, the HWP_REQ MSR will still be
capped to the user-set scaling_max_freq after SST-PP level change.
To address this, instead of setting scaling_max_freq to the current HWP_CAP
highest frequency, set it to the maximum integer value to set the QOS limit
as unconstrained. In this case, the actual HWP_REQ maximum frequency will
still be capped to HWP_CAP highest performance by the intel-pstate driver.
So, it will not result in invalid HWP_REQ values.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
The cfi selftest was missing a license so add it.
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-4-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Per Linus' comments requesting the replacement of "INDIR_BR_LP" in the
indirect branch tracking prctl()s with something more readable, and
suggesting the use of the speculation control prctl()s as an exemplar,
reimplement the prctl()s and related constants that control per-task
forward-edge control flow integrity.
This primarily involves two changes. First, the prctls are
restructured to resemble the style of the speculative execution
workaround control prctls PR_{GET,SET}_SPECULATION_CTRL, to make them
easier to extend in the future. Second, the "indir_br_lp" abbrevation
is expanded to "branch_landing_pads" to be less telegraphic. The
kselftest and documentation is adjusted accordingly.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Similar to the recent change to expand "LP" to "branch landing pad",
let's expand "SS" in the ptrace uapi macros to "shadow stack" as well.
This aligns with the existing prctl() arguments, which use the
expanded "shadow stack" names, rather than just the abbreviation.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Per Linus' comments about the unreadability of abbreviations such as
"LP", rename the RISC-V ptrace landing pad CFI macro names to be more
explicit. This primarily involves expanding "LP" in the names to some
variant of "branch landing pad."
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd5a ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c895b ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1ea6 ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Fix the build of non-kernel code that includes the RISC-V ptrace uapi
header, and the RISC-V validate_v_ptrace.c kselftest, by using the
_BITUL() macro rather than BIT(). BIT() is not available outside
the kernel.
Based on patches and comments from Charlie Jenkins, Michael Neuling,
and Andreas Schwab.
Fixes: 30eb191c895b ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 2af7c9cf021c ("riscv/ptrace: expose riscv CFI status and state via ptrace and in core files")
Cc: Andreas Schwab <schwab@suse.de>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Charlie Jenkins <thecharlesjenkins@gmail.com>
Link: https://patch.msgid.link/20260330024248.449292-1-mikey@neuling.org
Link: https://lore.kernel.org/linux-riscv/20260309-fix_selftests-v2-1-9d5a553a531e@gmail.com/
Link: https://lore.kernel.org/linux-riscv/20260309-fix_selftests-v2-3-9d5a553a531e@gmail.com/
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Pull amd-pstate new content for 7.1 (2026-04-02) from Mario Limonciello:
"Add support for new features:
* CPPC performance priority
* Dynamic EPP
* Raw EPP
* New unit tests for new features
Fixes for:
* PREEMPT_RT
* sysfs files being present when HW missing
* Broken/outdated documentation"
* tag 'amd-pstate-v7.1-2026-04-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (22 commits)
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
amd-pstate: Make certain freq_attrs conditionally visible
...
|
|
The current custom implementation of offsetof() fails UBSAN:
runtime error: member access within null pointer of type 'struct ...'
This means that all its users, including container_of(), free() and
realloc(), fail.
Use __builtin_offsetof() instead which does not have this issue and
has been available since GCC 4 and clang 3.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260401-nolibc-asprintf-v1-1-46292313439f@weissschuh.net
|
|
fstatat() contains two open-coded copies of makedev() to handle minor
numbers >= 256. Now that the regular makedev() handles both large minor
and major numbers correctly use the common function.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-6-456a429bf60c@weissschuh.net
|
|
Remove the limitation of only handling small major and minor numbers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-5-456a429bf60c@weissschuh.net
|
|
statx() returns both 32-bit minor and major numbers. For both of them to
fit into the 'dev_t' in 'struct stat', that needs to be 64 bits wide.
The other uses of 'dev_t' in nolibc are makedev() and friends and
mknod(). makedev() and friends are going to be adapted in an upcoming
commit and mknod() will silently truncate 'dev_t' to 'unsigned int' in
the kernel, similar to other libcs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-4-456a429bf60c@weissschuh.net
|
|
Functions make it easier to keep the input and output types straight and
avoid duplicate evaluations of their arguments.
Also these functions will become a bit more complex to handle full
64-bit 'dev_t' which is easier to read in a function.
Still stay compatible with code which expects these to be macros.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-3-456a429bf60c@weissschuh.net
|
|
The handling of 'dev_t' values is about to be changed.
Add a test to make sure they are returned correctly from stat().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-2-456a429bf60c@weissschuh.net
|
|
These functions/macros are about to be changed.
Add some tests to make sure they continue working.
As they only handle small dev_t values, only test those for now.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404-nolibc-makedev-v2-1-456a429bf60c@weissschuh.net
|
|
The test checks both invalid GPAs as well as unmappable GPAs, so drop
'invalid' from its name.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-10-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The test currently allegedly makes sure that VMRUN causes a #GP in
vmcb12 GPA is valid but unmappable. However, it calls run_guest() with
an the test vmcb12 GPA, and the #GP is produced from VMLOAD, not VMRUN.
Additionally, the underlying logic just changed to match architectural
behavior, and all of VMRUN/VMLOAD/VMSAVE fail emulation if vmcb12 cannot
be mapped. The CPU still injects a #GP if the vmcb12 GPA exceeds
maxphyaddr.
Rework the test such to use the KVM_ONE_VCPU_TEST[_SUITE] harness, and
test all of VMRUN/VMLOAD/VMSAVE with both an invalid GPA (-1ULL) causing
a #GP, and a valid but unmappable GPA causing emulation failure. Execute
the instructions directly from L1 instead of run_guest() to make sure
the #GP or emulation failure is produced by the right instruction.
Leave the #VMEXIT with unmappable GPA test case as-is, but wrap it with
a test harness as well.
Opportunisitically drop gp_triggered, as the test already checks that
a #GP was injected through a SYNC. Also, use the first unmapped GPA
instead of the maximum legal GPA, as some CPUs inject a #GP for the
maximum legal GPA (likely in a reserved area).
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260316202732.3164936-9-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
We have a test for coalescing with bad TCP checksum, let's also
test bad IPv4 header checksum.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We explicitly test ipip encap. Let's add ip6ip6, too. Having
just ipip seems like favoring IPv4 which we should not do :)
Testing all combinations is left for future work, not sure
it's actually worth it.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When constructing the packets for large_* test cases we use
a static value for packet count and MSS. It works okay for
ipv4 vs ipv6 but the gap between ipv4 and ip6ip6 is going to
be quite significant.
Make the defines calculate the worst case values, those
are only used for sizing stack arrays. Create helpers for
calculating precise values based on the exact test case.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Willem points out TOTAL_HDR_LEN is identical to MAX_HDR_LEN.
This seems to have been the case ever since the test was added.
Replace the uses of TOTAL_HDR_LEN with MAX_HDR_LEN, MAX seems
more common for what this value is.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Try to use already calculated offsets and not depend on the ipip
flag as much. This patch should not change any functionality,
it's just a cleanup to make ip6ip6 support easier.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new capacity/order test exits as soon as it sees the expected
packet sequence. This may allow the "flushing" FIN packet to spill
over to the next test. Let's always wait for the FIN before exiting.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small IPv4 packets get padded to 60B, this may break / confuse
some buggy implementations. Add a test to coalesce a 1B payload.
Keep this separate from the lrg_sml test because I suspect some
implementations may not handle this case (treat padded frames
as ineligible for coalescing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test trying to induce a GRO context timeout followed
by another sequence of packets for the same flow. The second
burst arrives 100ms after the first one so any implementation
(SW or HW) must time out waiting at that point. We expect both
bursts to be aggregated successfully but separately.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor CXL core/region code to make region code more manageable by
splitting out DAX and PMEM code from RAM handling code.
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
|
|
The series addresses conflicts between HMEM and CXL when handling Soft
Reserved memory ranges. CXL will try best effort in claiming the Soft
Reserved memory region that are CXL regions. If fails, it will punt
back to HMEM.
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
dax: Track all dax_region allocations under a global resource tree
dax/cxl, hmem: Initialize hmem early and defer dax_cxl binding
dax/hmem: Gate Soft Reserved deferral on DEV_DAX_CXL
dax/hmem: Request cxl_acpi and cxl_pci before walking Soft Reserved ranges
dax/hmem: Factor HMEM registration into __hmem_register_device()
dax/bus: Use dax_region_put() in alloc_dax_region() error path
|
|
Prep patches for CXL type2 accelerator basic support
cxl/region: Factor out interleave granularity setup
cxl/region: Factor out interleave ways setup
cxl: Make region type based on endpoint type
cxl/pci: Remove redundant cxl_pci_find_port() call
cxl: Move pci generic code from cxl_pci to core/cxl_pci
cxl: export internal structs for external Type2 drivers
cxl: support Type2 when initializing cxl_dev_state
|
|
The cxl_test module currently hard-codes auto regions in the mock
topology, limiting coverage of the driver's region auto-assembly
logic.
Teach cxl_test to replay previously committed decoder programming
across a cxl_acpi unbind/bind cycle. Decoder programming is recorded
in a registry keyed by a stable port identity and decoder id. The
registry is updated on decoder commit and reset events and consulted
during enumeration to restore previously enabled decoders.
This allows regions created through the user interface to be replayed
during enumeration and treated as auto-discovered regions, enabling
testing of region auto-assembly using configurations created in the
cxl_test topology.
Example workflow:
# cxl create-region ...
# echo 1 > /sys/bus/platform/devices/cxl_acpi.0/decoder_reset_preserve_registry
# echo cxl_acpi.0 > /sys/bus/platform/drivers/cxl_acpi/unbind
# echo cxl_acpi.0 > /sys/bus/platform/drivers/cxl_acpi/bind
# echo 0 > /sys/bus/platform/devices/cxl_acpi.0/decoder_reset_preserve_registry
The NDCTL CXL unit test, cxl-region-replay.sh, demonstrates the usage.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Co-developed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260314061952.2221030-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Drop the explicit KVM_SEV_LAUNCH_UPDATE_VMSA call when creating an SEV-ES
VM in the SEV migration test, as sev_vm_create() automatically updates the
VMSA pages for SEV-ES guests. The only reason the duplicate call doesn't
cause visible problems is because the test doesn't actually try to run the
vCPUs. That will change when KVM adds a check to prevent userspace from
re-launching a VMSA (which corrupts the VMSA page due to KVM writing
encrypted private memory).
Fixes: 69f8e15ab61f ("KVM: selftests: Use the SEV library APIs in the intra-host migration test")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
