<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel/git/stable/linux-stable.git/Documentation/admin-guide, branch master</title>
<subtitle>Linux kernel stable tree</subtitle>
<id>https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/atom?h=master</id>
<link rel='self' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/'/>
<updated>2026-08-27T16:17:06+00:00</updated>
<entry>
<title>Merge tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm</title>
<updated>2026-08-27T16:17:06+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-27T16:17:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=18fbf5151d2c0bfe433c7428eef03cabf5fdb2fa'/>
<id>urn:sha1:18fbf5151d2c0bfe433c7428eef03cabf5fdb2fa</id>
<content type='text'>
Pull more MM updates from Andrew Morton:

 - "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
   (Lorenzo Stoakes)

   Index MAP_PRIVATE file-backed folios by their anonymous page offset
   to resolve confusion around reverse mapping for zeroed and CoW'd
   file-backed memory.

   Use this new VMA anonymous page offset tracking to eliminate index
   conflicts and lay the foundation for scalable CoW performance
   improvements.

 - "promote mapped executable folios after first usage for MGLRU"
   (Baolin Wang)

   Make MGLRU's protection of mapped executable file folios more
   reliable. Follow the classical LRU's logic, promoting mapped
   executable file folios after their first usage to give executable
   code a better chance to stay in memory and improve workload
   performance.

 - "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
   Chen)

   Fix per-node proactive reclaim interface's ignoring the swappiness
   parameter when CONFIG_MEMCG is disabled by consolidating
   sc_swappiness() into a single function that checks
   proactive_swappiness regardless of kernel configuration.

 - "mm/vmscan: reduce lru_lock contention via vmstat-derived
   scan-balance cost" (Usama Arif)

   Reduce lru_lock contention in the reclaim path by deriving
   scan-balance costs from vmstat counters rather than lock-acquired
   producer updates.

   Read and decay these cost signals on the reclaim side under a
   dedicated per-lruvec lock, reducing total LRU lock wait time by over
   60% without impacting scan throughput.

 - "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)

   Fix two low-risk zram bugs which Sashiko spotted in drive-by review.

 - "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
   memcg" (Zi Yan)

   Fix xas_split_alloc() by enabling target folio memcg charging during
   splits and adding the missing __GFP_ACCOUNT flag for proper XArray
   node memory accounting.

 - "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)

   Replace hardcoded binary names in selftests/mm/.gitignore with a
   generic pattern-matching rule to automatically ignore generated test
   files and avoid manual updates when adding new tests.

 - "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)

   Make the incompatibility between FLATMEM and NUMA explicit in
   mm/Kconfig and remove the unused pgdat_page_ext_init() function.

 - "zram: fix zstd error paths and add parameter validation" (Haoqin
   Huang)

   Clean up zram compression backends by removing redundant error
   cleanup, adding parameter and dictionary validation, auto-prefixing
   algorithm error logs, and resetting parameters prior to
   reinitialization.

 - "zram: fix stale scan bounds after reinitialization" (Longlong Xia)

   Prevent out-of-bounds slot accesses during concurrent zram resets by
   moving table scan bound calculations under dev_lock in
   writeback_store() and read_block_state().

 - "add anon mTHP collapse test cases" (Baolin Wang)

   Extend selftests helper functions to support arbitrary page orders
   and add new test cases and options for mTHP collapse in khugepaged.

 - "selftests/mm: Handle unsupported and transient test conditions"
   (Muhammad Usama Anjum)

   Update MM selftests to report a SKIP status instead of a failure when
   required kernel or filesystem features are unsupported, while adding
   retry logic for transient page migration errors.

 - "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)

   Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
   and extend shrink_memcg() to support batch writeback for improved
   writeback efficiency.

 - "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
   Baghdasaryan)

   Introduce an IOCTL-based binary interface for memory allocation
   profiling that enables kernel-side filtering before per-CPU counter
   aggregation.

   This eliminates the text-parsing overhead of /proc/allocinfo and
   provides up to a 20x speedup by transferring only filtered allocation
   data to userspace.

 - "better block swap batching and a different take on swap_ops v5"
   (Christoph Hellwig)

   Refactor block swap I/O to use swap_iocb for batching instead of
   single-bio requests and rebase the swap_ops interface, achieving
   faster swap throughput during kernel builds.

 - "mm: kmemleak: reduce transient false positives by confirming leaks"
   (Catalin Marinas)

   Reduce false-positive kmemleak reports by combining two kmemleak
   enhancements that add a second confirmation scan and a configurable
   minimum unreferenced scan count module parameter.

 - "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
   (Breno Leitao)

   Auto-scanning kernels can generate false-positive memory leak reports
   on single scans, so this patch defaults min_unref_scans to 2 when
   CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
   confirming scan.

 - "swap_ops updates" (Christoph Hellwig)

   Batching I/O for synchronous swap devices causes performance
   regressions and filesystem-based swap suffers from double-indirection
   overhead. This series resolves both issues by reintroducing per-folio
   writes for synchronous swap and allowing filesystems to directly
   export their own swap_ops.

 - "mm/khugepaged: several cleanups" (Nico Pache)

   khugepaged accumulated redundant state-checking patterns and outdated
   comments following mTHP integration. Introduce dedicated helpers for
   PTE validation and event counting while refreshing the internal
   documentation.

 - "maple_tree: lock checking and clean ups" (Liam Howlett)

   Syzbot reports incorrectly blame memory management exit paths for
   locking bugs, maple tree erase operations risk allocation failures
   without gfp flags and internal documentation lacks clarity.

   Improve lock error detection, update docs, fix race and allocation
   edge cases and optimize erase allocations using a fallback to
   GFP_KERNEL | GFP_NOFAIL.

* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
  selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
  memcg: move LRU size accounting on reparenting instead of copying it
  mm/vmscan: fix comment logic in balance_pgdat
  maple_tree: add helper mas_make_walkable()
  maple_tree: avoid extra gap calculation
  maple_tree: fix argument name in header
  maple_tree: change two GFP flags in tests
  maple_tree: document erase and allocations better
  maple_tree: avoid mas_erase() and mtree_erase() failures
  maple_tree: document that erase may use GFP_KERNEL for allocations
  maple_tree: catch race in mas_alloc_cyclic()
  maple_tree: add bulk parent set helper
  maple_tree: micro optimisation of mas_wr_store_type()
  maple_tree: optimise mas_wr_node_store() when not in rcu mode
  maple_tree: use prefetched value in mas_wr_store_type()
  maple_tree: clarify comments on mas_nomem()
  maple_tree: drop MAPLE_ALLOC_SLOTS
  maple_tree: drop dead code from mas_extend_spanning_null()
  maple_tree: documentation fix
  maple_tree: add write lock checking with lockdep sequence numbers
  ...
</content>
</entry>
<entry>
<title>Merge tag 'docs-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux</title>
<updated>2026-08-26T16:25:12+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-26T16:25:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=2bdcd6cf2ac4186c3640ac54cfc48c14de80948c'/>
<id>urn:sha1:2bdcd6cf2ac4186c3640ac54cfc48c14de80948c</id>
<content type='text'>
Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving fixes, a Japanese translation that was
  ready long ago but fell through the cracks, and an update to the
  Italian translations"

* tag 'docs-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
  docs: panic: Disclaimer about console verbosity when using panic_print with pstore
  docs: kernel-parameters: add CPU_FREQ, CPU_IDLE build options
  doc:it_IT: align Italian documentation in process
  docs: threat-model: fix /dev/kmsg reference
  docs: block: fix dead http link in blk-mq.rst
  docs/ja_JP: translate submitting-patches.rst (tag usage)
</content>
</entry>
<entry>
<title>Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm</title>
<updated>2026-08-25T18:48:04+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-25T18:48:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=7bb6284aa7b3c369b41e7f33fcbe193161f008e7'/>
<id>urn:sha1:7bb6284aa7b3c369b41e7f33fcbe193161f008e7</id>
<content type='text'>
Pull kvm updates from Paolo Bonzini:
 "ARM64:

   - Add support for 'slot' based PMU events, paired with new UAPI that
     compels the user to select a specific PMU implementation

   - Lazy save/restore of vCPU state for pKVM, along with various fixes
     and cleanups to the management of vCPU state between the untrusted
     host and pKVM hypervisor

   - Disable traps of EL1 registers for nested hypervisors when
     FEAT_NV2p1 is present, guaranteeing that EL2-specific register bits
     are stateful in the EL1 counterpart

   - Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the
     scope of those instructions remains 'in host' (i.e. L1
     kernel/userspace)

   - Pile of fixes for the management of the VNCR pseudo-TLB, such as
     under-invalidations and races with concurrent TLBIs on other vCPUs

   - Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a
     runtime-patched constant, allowing the same data to be shared with
     pKVM prior to dropping host privileges

   - Considerable pile of LLM-assisted fixes around the shop but mostly
     in the VGIC, our in-kernel generator of bugs (and sometimes
     interrupts)

  LoongArch:

   - Advertise already-supported capabilities

   - Some bug fixes about timer and MMIO

   - Some hardening about interrupt injection

   - Replace kvm_err() with kvm_pr_unimpl()

   - Add FPU/LSX/LASX test cases for selftests

  RISC-V:

   - Svadu/Zicfiss/Zicfilp FWFT support for Guest

   - Use try_cmpxchg for IMSIC MRIF RMW

   - More arch-specific tracepoints in KVM RISC-V

   - Eager page splitting when enabling dirty logging

   - Optimize hfence request handling for SMP Guests

   - Improve dirty log clearing by skipping zero bits in mask

   - Guard HFENCE range loops against overflow

   - CPU PM notifiers in KVM RISC-V for non-retentive idle states

   - Fix kernel-mode vector context save/restore for Guest

  s390:

   - Fixes for vfio-ap

   - Fixes for the gmap rework

   - Fixes for vsie

   - AI triggered fixes all over

   - diag9c tracing

   - code move preparation for the additional arm64 support

   - enable CONTEXT_ANALYSIS

  x86:

   - Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding
     regs.c (the kvm_cache_regs.h =&gt; regs.h is already applied) and
     msrs.{c,h}, and moving relevant code out of x86.c

   - Split kvm_mmu in three parts, respectively to describe the format
     of page tables, walking the guest page tables and building the page
     tables. Always use the same page table walker kvm-&gt;arch.gva_walk as
     the entry point to convert a guest's virtual address, where the
     previous code used two different kvm_mmu structs depending on
     whether the walk included nested EPT/NPT or not. Make page fault
     vmexits reuse the permission checking machinery that is used for
     guest page faults. This is both a cleanup and a baby step towards
     supporting XS/XU memory permissions

   - Document some of the "fun" gotchas with the APIC base when creating
     IRQCHIPs on x86

   - Remove a defunct masterclock update from kvm_xen_shared_info_init().
     It could result in incorrect kvmclock due to triggering an
     unnecessary switch to/from masterclock mode

   - Skip Xen runstate time updates if time has effectively gone
     backwards, so that the guest doesn't report 100% steal time for
     a very, very long time

   - Drop KVM's runtime updates of the Xen PV timing CPUID leaf, as KVM
     was updating the wrong sub-leaf, and upstream KVM will soon provide
     all the information needed by userspace to populate the CPUID field
     itself

   - Fix a bug where KVM would walk a newly created rmap without holding
     the rmap lock (or mmu_lock) during aging

   - Fix a bug where aging TDP MMU SPTEs could clobber FROZEN SPTEs

   - Fix a variety of #DB priority bugs

   - Fix a class of races related to enabling Hyper-V emulation on a
     vCPU after the vCPU is visible to the rest of KVM

   - Use static calls for nested virtualization ops

   - Move more KVM-internal code out of x86's kvm_host.h

   - Enumerate support for a variety of Zhaoxin instructions that don't
     require explicit virtualization

   - Fix missing EFER validation bugs, including in the KVM_SET_SREGS*
     path

   - Harden kvm_vcpu_map() against double-mapping and thus leaking
     references

   - Misc fixes and cleanups, e.g. for largely benign syzkaller splats

  x86 (Intel):

   - Zero a vCPU's entry in VMX's Posted Interrupt Descriptor table used
     for IPI virtualization when the vCPU is freed, to fix a
     use-after-free where hardware will write to a freed vCPU's PID

   - Service local TLB flushes on a failed nested VM-Enter to fix a bug
     where KVM could miss a TLB on a future, successful VM-Enter with
     the same L2 VPID

   - Cap the maximum value shoved into the VMX Preemption Timer to
     workaround an erratum that affects all existing Intel CPUs that
     support CPUID 0x15

   - Fix VPID virtualization bugs where KVM would fail to flush hardware
     TLBs

   - Harden the TDX "populate" ioctls against bad input, and to prepare
     for supporting in-place private&lt;=&gt;shared conversion

  x86 (AMD):

   - Forcefully invalidate SNP VMSA pages if their backing guest_memfd
     page is zapped/invalidated, e.g. due to a PUNCH_HOLE in response to
     a Page-State Change request

   - Remove a dying VM from the GA Log notifier list before the VM is
     actually destroyed, to fix a potential use-after-free

   - While FOLL_WRITE was needed in the past to trigger CoW unsharing,
     nowadays FOLL_LONGTERM does that already even without FOLL_WRITE,
     and in fact, get_user_pages() actually disallows FOLL_WRITE
     together with FOLL_LONGTERM. So don't pass FOLL_WRITE when
     registering encrypted memory regions, i.e. when pinning SEV/SEV-ES
     guest memory, to fix a regression with file-backed memory
     introduced by KVM's (correct) usage of long-term pins

     (This was reviewed by mm maintainers; for more information, see
     commit ee1a586dd1fa "KVM: SEV: Drop FOLL_WRITE for encrypted region
     registration")

   - Allocate full pages for SEV/SEV-ES {DE,EN}CRYPT ops on SNP-enabled
     hosts to fix a data corruption issue due to the PSP driver
     assigning to-be-written pages to firmware (as required by the SNP
     specs)

   - Unconditionally intercept ICBEP so that KVM generates the correct
     guest RIP when handling an ICEBP-induced TASK_SWITCH #VMEXIT

   - Harden the SNP "populate" ioctls against bad input, and to prepare
     for supporting in-place private&lt;=&gt;shared conversion

  Generic:

   - Remove kvm_debugfs_dir if kvm_init() fails after creating KVM's
     debugfs

   - Add a per-VM bitmap to track which vCPU IDs have been "claimed" but
     for which the vCPU isn't yet online, and use the bitmap to reject
     duplicate IDs before calling into arch code. This allows arch code
     to consume vcpu_id without having to worry about cross-vCPU
     clobbering (at least s390 and x86 have had related bugs)

   - Rework the so called "prepare" and "invalidate" guest_memfd hooks
     to prepare for in-place private&lt;=&gt;shared conversion, and clean up a
     few warts along the way

  Selftests:

   - Automatically allocate a full page for L2 guest stacks on x86
     instead of requiring test-specific L1 guest code to carve out a
     portion of the L1 stack for L2 usage, and to ensure the L2 stack
     also adheres to the x86-64 calling convention ABI

   - Add a selftest to verify {Guest,Host}-Only behavior in x86's
     mediated PMU

   - Clean up nested SVM's handling of GPRs on L2&lt;=&gt;L1 transitions,
     reuse the functionality for nested VMX, and drop the ucall hack
     that was fudging around the lack of GPR switching on nVMX

   - Add a stress test to verify KVM doesn't clobber/drop #PF state,
     e.g. CR2, across save/restore, including when L2 is active

   - Add a test to verify KVM_CREATE_VM accepts exactly what is reported
     by KVM_CAP_VM_TYPES

   - Misc selftests fixes and cleanups

   - Fix several issues with seeding the pRNG, and rework the pRNG APIs
     to that the pRNG can be sanely used in host code, not just guest
     code

   - Add an IRQ test to validate virtual IRQ deliverty for IRQs wired up
     via KVM_IRQFD + KVM_SET_GSI_ROUTING, with optional support for
     triggering IRQs via writes to an assigned VFIO device

   - Add syscall wrappers to assert success on a variety of pthreads and
     CPU affinity APIs

   - Set vCPU pthread affinity as early as possible to reduce contention
     issues that were surfaced by PREEMPT_LAZY, which result in runtimes
     of over a minute on large hosts, versus the expected ~5 seconds

   - Rework the PMU counters test to run each testcase using a single VM
     with many vCPUs for each sub-testcase, instead of using a unique VM
     for each sub-testcase. This cuts the runtime by ~20x

  Miscellaneous:

   - MAINTAINERS updates for vfio-ap, guest_memfd, kvm-x86. Mostly
     representing the status quo more accurately, but also... welcome
     David Hildenbrand as guest_memfd reviewer!"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (413 commits)
  KVM: arm64: Validate GICv5 timer PPIs before claiming ownership
  KVM: arm64: vgic: Reject out-of-range GICv5 PPI IDs
  KVM: arm64: vgic: Prevent speculative SPI array underflow
  KVM: arm64: vgic: Free gic_kvm_info on initialization failure
  KVM: arm64: Avoid mismatched accesses to 'struct kvm_nvhe_init_params'
  s390/vfio-ap: Fix NULL deref in status_show() during queue probe
  s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
  s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
  s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
  s390/vfio-ap: Fix required lock not held during update of ap_matrix_mdev object
  s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
  s390/vfio-ap: Fix dereference matrix_mdev-&gt;kvm without checking for NULL
  s390/vfio-ap: Fix stale do_remove flag across iterations in vfio_ap_mdev_cfg_remove
  RISC-V: KVM: fix vcpu vector context handling for kernel-mode vector
  riscv: vector: allow non-preemptible kernel-mode vector with IRQs off
  riscv: vector: refactor riscv_v_start_kernel_context
  KVM: s390: gmap: Make prefix handling optional
  KVM: s390: gmap: Make CMMA optional
  KVM: s390: gmap: Make storage keys optional
  KVM: s390: Prepare gmap for a second KVM implementation
  ...
</content>
</entry>
<entry>
<title>Merge tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb</title>
<updated>2026-08-25T17:44:46+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-25T17:44:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=f4d50813c0958b7d6bc79a7e0a77193372cbfd03'/>
<id>urn:sha1:f4d50813c0958b7d6bc79a7e0a77193372cbfd03</id>
<content type='text'>
Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.

  Lots of driver work for new devices and systems, and many other minor
  fixes and updates. Included in here are:

   - Thunderbolt subsystem driver updates and additions

   - typec driver updates and additions

   - usb gadget fixes all over the place, seems like people are finally
     paying attention to these drivers for some reason

   - xhci driver updates and fixes based on lots of reports

   - usb-serial driver updates and additions

   - new device ids

   - other minor USB driver updates and fixes

  All of these have been in linux-next for a while with no reported issues"

* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
  usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
  usb: typec: hd3ss3220: fix VBUS regulator error message
  usb: usbfs: fix use-after-free of usb_device in usbdev_release()
  usb: gadget: u_audio: Fix use-after-free on sound card disconnect
  usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
  usb: gadget: f_tcm: keep port count until LUN teardown completes
  usb: usbtest: disable dynamic ID support
  usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
  USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
  usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
  usb: gadget: snps_udc_plat: clean up PHY on probe deferral
  usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
  usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
  usb: gadget: f_fs: Fix Use-After-Free in AIO error path
  usb: gadget: f_fs: Prevent deadlock during ep0 read loop
  usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
  usb: gadget: midi2: remove default configfs groups on teardown
  usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
  usb: typec: thunderbolt: Disable work before freeing tbt on remove
  usb: xhci: Handle bogus TRB pointers in Missed Service Error events
  ...
</content>
</entry>
<entry>
<title>Merge tag 'bootconfig-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace</title>
<updated>2026-08-25T15:59:09+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-25T15:59:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=5f5ef9c407cfdc524a1aaeb4196d933f61ecf21a'/>
<id>urn:sha1:5f5ef9c407cfdc524a1aaeb4196d933f61ecf21a</id>
<content type='text'>
Pull bootconfig updates from Masami Hiramatsu:

 - Support build-time command line building for embedded bootconfig

 - Fix xbc_snprint_cmdline() to render descendant keys when the root has
   both a value and subkeys, and treats empty subtrees correctly.

 - Add build-time pipeline using tools/bootconfig -C to render the
   embedded bootconfig "kernel" subtree into .init.rodata as a cmdline
   string.

 - Clean build-time tools/bootconfig from make clean

 - Add helper to prepend embedded bootconfig cmdline into
   boot_command_line early before parse_early_param()

 - Wire early prepend helper in x86 setup_arch() so early_param handlers
   see values from the embedded bootconfig (currently x86 only)

 - Avoid duplicating "kernel" keys in setup_boot_config()

 - Refactor setup_boot_config() to share bootconfig_cmdline_requested()

 - Document CONFIG_CMDLINE_FROM_BOOTCONFIG usage, requirements, and
   precedence

* tag 'bootconfig-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  init/main.c: use bootconfig_cmdline_requested() for the runtime opt-in
  bootconfig: skip runtime kernel.* render once prepended early
  x86/setup: prepend embedded bootconfig cmdline before parse_early_param
  Documentation: bootconfig: document build-time cmdline rendering
  bootconfig: add xbc_prepend_embedded_cmdline() helper
  bootconfig: clean build-time tools/bootconfig from make clean
  bootconfig: render embedded bootconfig as a kernel cmdline at build time
  bootconfig: render descendant keys when xbc_snprint_cmdline() root has a value
</content>
</entry>
<entry>
<title>mm: Documentation: clarify where the mTHP stats live</title>
<updated>2026-08-25T01:43:23+00:00</updated>
<author>
<name>Nico Pache (Red Hat)</name>
<email>nico.pache@linux.dev</email>
</author>
<published>2026-08-11T12:48:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=2a0be246e342e239ef91d28e2658b6bf508cc065'/>
<id>urn:sha1:2a0be246e342e239ef91d28e2658b6bf508cc065</id>
<content type='text'>
The note about khugepaged counters references /proc/vmstat for the PMD
case, but never mentions where the mTHPs stats can be found (i.e.:
/sys/kernel/mm/transparent_hugepage/hugepages-&lt;size&gt;kB/stats/) Add a small
addition to this section for clarity.

Also fix a missing period while we are at it.

Link: https://lore.kernel.org/20260811-khugepaged_pte_refactor-v4-7-ddac39d61c4a@linux.dev
Signed-off-by: Nico Pache (Red Hat) &lt;nico.pache@linux.dev&gt;
Reviewed-by: Baolin Wang &lt;baolin.wang@linux.alibaba.com&gt;
Suggested-by: Lorenzo Stoakes &lt;ljs@kernel.org&gt;
Acked-by: David Hildenbrand (Arm) &lt;david@kernel.org&gt;
Reviewed-by: Zi Yan &lt;ziy@nvidia.com&gt;
Acked-by: Pedro Falcato &lt;pfalcato@suse.de&gt; 
Reviewed-by: Lorenzo Stoakes (ARM) &lt;ljs@kernel.org&gt;
Reviewed-by: Lance Yang &lt;lance.yang@linux.dev&gt;
Cc: Barry Song &lt;baohua@kernel.org&gt;
Cc: Dev Jain &lt;dev.jain@arm.com&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: Liam R. Howlett &lt;liam@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Mike Rapoport &lt;rppt@kernel.org&gt;
Cc: Ryan Roberts &lt;ryan.roberts@arm.com&gt;
Cc: Suren Baghdasaryan &lt;surenb@google.com&gt;
Cc: Usama Arif &lt;usama.arif@linux.dev&gt;
Cc: Vlastimil Babka &lt;vbabka@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>mm/hugetlb_cma: support percentage-based hugetlb_cma reservation</title>
<updated>2026-08-25T01:43:11+00:00</updated>
<author>
<name>Sourav Panda</name>
<email>souravpanda@google.com</email>
</author>
<published>2026-08-07T04:00:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=34e0849142c317eed68f3a4818dd3808fb1c47db'/>
<id>urn:sha1:34e0849142c317eed68f3a4818dd3808fb1c47db</id>
<content type='text'>
Currently, hugetlb_cma reservation only supports absolute sizes (e.g.,
hugetlb_cma=2G or hugetlb_cma=0:1G,1:1G).  This can be restrictive in
heterogeneous environments or when deploying common kernel command lines
across machines with different memory capacities.

Add support for percentage-based hugetlb_cma reservation (e.g.,
hugetlb_cma=20% or hugetlb_cma=0:20%,1:10%).

The percentage is calculated against the total memory (for global
settings) or against the node-specific memory (for node-specific settings)
using memblock APIs during early boot.

Link: https://lore.kernel.org/20260807040003.2156630-1-souravpanda@google.com
Signed-off-by: Sourav Panda &lt;souravpanda@google.com&gt;
Acked-by: Usama Arif &lt;usama.arif@linux.dev&gt;
Cc: David Hildenbrand &lt;david@kernel.org&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Frank van der Linden &lt;fvdl@google.com&gt;
Cc: Greg Thelen &lt;gthelen@google.com&gt;
Cc: Muchun Song &lt;muchun.song@linux.dev&gt;
Cc: Oscar Salvador &lt;osalvador@suse.de&gt;
Cc: Suren Baghdasaryan &lt;surenb@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>mm/page_reporting: add page_reporting_delay_ms module parameter</title>
<updated>2026-08-25T01:42:58+00:00</updated>
<author>
<name>Pratyush Mallick</name>
<email>pratmal@google.com</email>
</author>
<published>2026-07-31T19:37:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=7a39f03bc9da3499c2423758f353ab72d23faa16'/>
<id>urn:sha1:7a39f03bc9da3499c2423758f353ab72d23faa16</id>
<content type='text'>
Free page reporting currently hardcodes a 2-second interval between
reports.  This rigid delay cannot accommodate diverse guest workloads.

This patch introduces a module parameter, page_reporting_delay_ms
(default: 2000), allowing users to tune the reporting rate:
 - Lower values enable aggressive memory reclamation by returning unused
   pages to the host immediately.
 - Higher values help batch pages during spiky allocation/free churn,
   reducing hypercalls and nested page fault overheads.

Setting the delay to 0 is safe and execution is strictly gated by:
 - reporting is only triggered by high-order page frees.
 - expensive hypercalls are bounded by a slot capacity watermark check
   before proceeding.

Link: https://lore.kernel.org/20260731193705.2902728-1-pratmal@google.com
Signed-off-by: Pratyush Mallick &lt;pratmal@google.com&gt;
Reviewed-by: SJ Park &lt;sj@kernel.org&gt;
Acked-by: Lorenzo Stoakes (ARM) &lt;ljs@kernel.org&gt;
Acked-by: David Hildenbrand (Arm) &lt;david@kernel.org&gt;
Cc: Anshuman Khandual &lt;anshuman.khandual@arm.com&gt;
Cc: Brendan Jackman &lt;jackmanb@google.com&gt;
Cc: Greg Thelen &lt;gthelen@google.com&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: Liam R. Howlett &lt;liam@infradead.org&gt;
Cc: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Mike Rapoport &lt;rppt@kernel.org&gt;
Cc: SeongJae Park &lt;sj@kernel.org&gt;
Cc: Suren Baghdasaryan &lt;surenb@google.com&gt;
Cc: Vlastimil Babka &lt;vbabka@kernel.org&gt;
Cc: Zi Yan &lt;ziy@nvidia.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>Documentation: zram: correct algo parameters configuration documentation</title>
<updated>2026-08-25T01:42:57+00:00</updated>
<author>
<name>Sergey Senozhatsky</name>
<email>senozhatsky@chromium.org</email>
</author>
<published>2026-07-30T07:51:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=f74e6dff5440f662bced614b723a7d8f2b05919d'/>
<id>urn:sha1:f74e6dff5440f662bced614b723a7d8f2b05919d</id>
<content type='text'>
zram has always reset all previously set parameters for the given
algorithm in comp_params_store().  Make documentation more clear and
explicitly state that all relevant/necessary parameters should be set in
one configuration write.

Link: https://lore.kernel.org/20260730075158.1339787-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky &lt;senozhatsky@chromium.org&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: Minchan Kim &lt;minchan@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
</content>
</entry>
<entry>
<title>Merge tags 'dma-mapping-7.3-2026-08-24' and 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux</title>
<updated>2026-08-24T18:35:46+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-24T18:35:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=2f43193b88188b184a967c9427602e019f1b8708'/>
<id>urn:sha1:2f43193b88188b184a967c9427602e019f1b8708</id>
<content type='text'>
Pull dma-mapping updates from Marek Szyprowski:

 - swiotlb:
     - new configuration option for the default pool size
       (Jagadeesh Pagadala)
     - reduce overhead for high watermark tracking (chenhuguanshen)

 - minor code cleanups and improvements (Vova Sharaienko, Honglei Huang
   and Marek Szyprowski)

 - add proper tracking of the shared DMA state through direct, pool and
   swiotlb paths (Aneesh Kumar K.V)

   This is important for confidential-computing

* tag 'dma-mapping-7.3-2026-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
  dma/swiotlb: decouple high watermark tracking from CONFIG_DEBUG_FS
  MAINTAINERS: update tree for DMA MAPPING HELPERS
  dma/swiotlb: introduce Kconfig option for compile-time default pool size
  dma-direct: Improve readability of the dma_direct_map_sg() for P2PDMA case
  iommu/dma: simplify dma_iova_destroy() and drop the free_iova helper
  dma-coherent: use KiB in DMA allocation logs
  dma-coherent: fix spacing coding style issue

* tag 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (23 commits)
  swiotlb: remove unused SWIOTLB_FORCE flag
  dma: swiotlb: handle set_memory_decrypted() failures
  dma: swiotlb: free dynamic pools from process context
  dma-direct: rename ret to cpu_addr in alloc helpers
  dma-direct: select DMA address encoding from __DMA_ATTR_ALLOC_CC_SHARED
  dma-direct: set decrypted flag for remapped DMA allocations
  dma-direct: make dma_direct_map_phys() honor DMA_ATTR_CC_SHARED
  dma-direct: Move dma_direct_map_phys() to dma/direct.c
  dma-direct: pass attrs to dma_capable() for DMA_ATTR_CC_SHARED checks
  dma-mapping: make dma_pgprot() honor __DMA_ATTR_ALLOC_CC_SHARED
  dma: swiotlb: track pool encryption state and honor DMA_ATTR_CC_SHARED
  dma: swiotlb: pass mapping attributes by reference
  dma-pool: track decrypted atomic pools and select them via attrs
  dma-direct: use __DMA_ATTR_ALLOC_CC_SHARED in alloc/free paths
  dma-mapping: Add internal shared allocation attribute
  coco: arm64: s390: powerpc: Mark secure guests with CC_ATTR_GUEST_MEM_ENCRYPT
  dma-direct: swiotlb: handle swiotlb alloc/free outside __dma_direct_alloc_pages
  s390: Expose protected virtualization through cc_platform_has()
  swiotlb: Preserve allocation virtual address for dynamic pools
  dma: free atomic pool pages by physical address
  ...
</content>
</entry>
</feed>
