kernel/git/stable/linux-stable.git/arch/m68k/mac, branch linux-5.14.y

m68k/mac: Replace macide driver with generic platform drivers

2021-06-10T22:30:11+00:00

This allows m68k mac systems to switch from the deprecated IDE subsystem to libata. This was tested on my Quadra 630. I haven't tested it on my PowerBook 150 because I don't have a RAM adapter board for it. It appears that the hardware I tested doesn't need macide_clear_irq() or macide_test_irq(). If it did, the generic driver would not have worked. It's possible that those routines are needed for the PowerBook 150 but we can cross that bridge if and when we come to it. BTW, macide_clear_irq() appears to suffer from a race condition. The write to the interrupt flags register could have unintended side effects as it may alter other flag bits. Fortunately, all of the other bits are unused by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20 was observed to have no effect on bit 5, so it may be redundant anyway. Cc: Michael Schmitz Cc: Joshua Thompson Reviewed-by: Michael Schmitz Acked-by: Geert Uytterhoeven Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe

Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2020-12-16T08:07:17+00:00

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform

m68k: Fix WARNING splat in pmac_zilog driver

2020-11-23T10:31:00+00:00

Don't add platform resources that won't be used. This avoids a recently-added warning from the driver core, that can show up on a multi-platform kernel when !MACH_IS_MAC. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/base/platform.c:224 platform_get_irq_optional+0x8e/0xce 0 is an invalid IRQ number Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-multi #1 Stack from 004b3f04: 004b3f04 00462c2f 00462c2f 004b3f20 0002e128 004754db 004b6ad4 004b3f4c 0002e19c 004754f7 000000e0 00285ba0 00000009 00000000 004b3f44 ffffffff 004754db 004b3f64 004b3f74 00285ba0 004754f7 000000e0 00000009 004754db 004fdf0c 005269e2 004fdf0c 00000000 004b3f88 00285cae 004b6964 00000000 004fdf0c 004b3fac 0051cc68 004b6964 00000000 004b6964 00000200 00000000 0051cc3e 0023c18a 004b3fc0 0051cd8a 004fdf0c 00000002 0052b43c 004b3fc8 Call Trace: [<0002e128>] __warn+0xa6/0xd6 [<0002e19c>] warn_slowpath_fmt+0x44/0x76 [<00285ba0>] platform_get_irq_optional+0x8e/0xce [<00285ba0>] platform_get_irq_optional+0x8e/0xce [<00285cae>] platform_get_irq+0x12/0x4c [<0051cc68>] pmz_init_port+0x2a/0xa6 [<0051cc3e>] pmz_init_port+0x0/0xa6 [<0023c18a>] strlen+0x0/0x22 [<0051cd8a>] pmz_probe+0x34/0x88 [<0051cde6>] pmz_console_init+0x8/0x28 [<00511776>] console_init+0x1e/0x28 [<0005a3bc>] printk+0x0/0x16 [<0050a8a6>] start_kernel+0x368/0x4ce [<005094f8>] _sinittext+0x4f8/0xc48 random: get_random_bytes called from print_oops_end_marker+0x56/0x80 with crng_init=0 ---[ end trace 392d8e82eed68d6c ]--- Commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid"), which introduced the WARNING, suggests that testing for irq == 0 is undesirable. Instead of that comparison, just test for resource existence. Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Joshua Thompson Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: stable@vger.kernel.org # v5.8+ Reported-by: Laurent Vivier Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/0c0fe1e4f11ccec202d4df09ea7d9d98155d101a.1606001297.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven

m68k: mac: Remove redundant VIA register writes

2020-11-23T10:30:56+00:00

There's no need to write the same value to the timer latch and timer counter registers. Values written to the counter registers get stored in the latches anyway. The write to vT1CH copies the latch values to the counter. Cc: Joshua Thompson Tested-by: Stan Johnson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/c6b1d9620af3e8f89dd0157a41fa4147294b251d.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven

m68k: mac: Remove dead code

2020-11-23T10:30:54+00:00

Cc: Joshua Thompson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/effef6339c919a4ef2e81a47e4383f712cdd7626.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven

m68k: mac: Refactor iop_preinit() and iop_init()

2020-11-23T10:30:51+00:00

The idea behind iop_preinit() was to put the SCC IOP into bypass mode. However, that remains unimplemented and implementing it would be difficult. Let the comments and code reflect this. Even if iop_preinit() worked as described in the comments, it gets called immediately before iop_init() so it might as well part of iop_init(). Cc: Joshua Thompson Tested-by: Stan Johnson Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/0a7b09f5e5f48e270b82041c19e8f20f54c69216.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven

m68k: Remove unused mach_max_dma_address

2020-11-02T11:05:21+00:00

This information is unused since the discontinuous memory support has been introduced in 2007. Fixes: 12d810c1b8c2 ("m68k: discontinuous memory support") Signed-off-by: Laurent Vivier Link: https://lore.kernel.org/r/20201009095621.833192-1-laurent@vivier.eu Signed-off-by: Geert Uytterhoeven

m68k: remove timer_interrupt() function

2020-10-30T20:57:06+00:00

This gets passed to a number of init functions, but is ignored everywhere, so remove the function and change the mach_sched_init callback to take no arguments. Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann

m68k: change remaining timers to legacy_timer_tick

2020-10-30T20:57:06+00:00

There are nine more machines that each have their own timer interrupt calling the m68k timer_interrupt() function through an indirect pointer. This function is now the same as legacy_timer_tick, so just call that directly and select the corresponding Kconfig symbol. Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann

Merge tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

2020-10-12T17:10:56+00:00

Pull m68k updates from Geert Uytterhoeven: - Conversion of the Mac IDE driver to a platform driver - Minor cleanups and fixes * tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: ide/macide: Convert Mac IDE driver to platform driver m68k: Replace HTTP links with HTTPS ones m68k: mm: Remove superfluous memblock_alloc*() casts m68k: mm: Use PAGE_ALIGNED() helper m68k: Sort selects in main Kconfig m68k: amiga: Clean up Amiga hardware configuration m68k: Revive _TIF_* masks m68k: Correct some typos in comments m68k: Use get_kernel_nofault() in show_registers() zorro: Fix address space collision message with RAM expansion boards m68k: amiga: Fix Denise detection on OCS