kernel/git/stable/linux-stable.git/arch/mips/alchemy, branch linux-4.5.y

pcmcia: db1xxx_ss: fix last irq_to_gpio user

2016-04-20T06:45:21+00:00

commit e34b6fcf9b09ec9d93503edd5f81489791ffd602 upstream. remove the usage of removed irq_to_gpio() function. On pre-DB1200 boards, pass the actual carddetect GPIO number instead of the IRQ, because we need the gpio to actually test card status (inserted or not) and can get the irq number with gpio_to_irq() instead. Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500, which used irq_to_gpio(). Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by: Manuel Lauss Acked-by: Arnd Bergmann Reviewed-by: Linus Walleij Cc: linux-pcmcia@lists.infradead.org Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/12747/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2016-01-24T20:50:56+00:00

Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...

MIPS: Alchemy: Be sure to clamp return value

2016-01-24T01:20:45+00:00

As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11921/ Signed-off-by: Ralf Baechle

mips: nand: make use of mtd_to_nand() where appropriate

2015-12-08T21:03:07+00:00

mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all MIPS specific implementations to use this helper. Signed-off-by: Boris Brezillon Acked-by: Brian Norris Signed-off-by: Brian Norris

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-09-03T23:55:55+00:00

Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...

MIPS: Remove all the uses of custom gpio.h

2015-09-03T10:08:02+00:00

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel Reviewed-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Rafał Miłecki Cc: Bartlomiej Zolnierkiewicz Cc: Tejun Heo Cc: Alexandre Courbot Cc: Dmitry Torokhov Cc: Florian Fainelli Cc: Manuel Lauss Cc: Joe Perches Cc: Daniel Walter Cc: Sergey Ryazanov Cc: Huacai Chen Cc: James Hartley Cc: Andrew Bresticker Cc: Paul Burton Cc: Jiri Kosina Cc: Bjorn Helgaas Cc: Wolfram Sang Cc: Randy Dunlap Cc: Varka Bhadram Cc: Masanari Iida Cc: Tomi Valkeinen Cc: Michael Buesch Cc: abdoulaye berthe Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: Migrate to new 'set-state' interface

2015-09-03T10:07:50+00:00

Migrate alchemy driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by: Viresh Kumar Cc: Manuel Lauss Cc: Daniel Lezcano Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner Patchwork: https://patchwork.linux-mips.org/patch/10599/ Signed-off-by: Ralf Baechle

MIPS: alchemy: Remove pointless irqdisable/enable

2015-08-26T13:23:30+00:00

bcsr_csc_handler() is a cascading interrupt handler. It has a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. [ralf@linux-mips.org: Fold in followup fix from Thomas Gleixner.] Signed-off-by: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: LKML Cc: Jiang Liu Patchwork: https://patchwork.linux-mips.org/patch/10702/ Patchwork: https://patchwork.linux-mips.org/patch/10708/ Signed-off-by: Ralf Baechle

MIPS: alchemy: Use irq_set_chip_handler_name_locked()

2015-08-26T13:23:28+00:00

Hand in irq_data and avoid the redundant lookup of irq_desc. Originally-from: Jiang Liu Signed-off-by: Thomas Gleixner Cc: LKML Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10700/ Signed-off-by: Ralf Baechle