kernel/git/stable/linux-stable.git/arch/powerpc/lib, branch linux-4.19.y

powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static

2024-12-05T09:59:35+00:00

[ Upstream commit a26c4dbb3d9c1821cb0fc11cb2dbc32d5bf3463b ] These functions are not used outside of sstep.c Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Signed-off-by: Michal Suchanek Signed-off-by: Michael Ellerman Link: https://patch.msgid.link/20241001130356.14664-1-msuchanek@suse.de Signed-off-by: Sasha Levin

powerpc: xor_vmx: Add '-mhard-float' to CFLAGS

2024-04-13T10:50:10+00:00

commit 35f20786c481d5ced9283ff42de5c69b65e5ed13 upstream. arch/powerpc/lib/xor_vmx.o is built with '-msoft-float' (from the main powerpc Makefile) and '-maltivec' (from its CFLAGS), which causes an error when building with clang after a recent change in main: error: option '-msoft-float' cannot be specified with '-maltivec' make[6]: *** [scripts/Makefile.build:243: arch/powerpc/lib/xor_vmx.o] Error 1 Explicitly add '-mhard-float' before '-maltivec' in xor_vmx.o's CFLAGS to override the previous inclusion of '-msoft-float' (as the last option wins), which matches how other areas of the kernel use '-maltivec', such as AMDGPU. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1986 Link: https://github.com/llvm/llvm-project/commit/4792f912b232141ecba4cbae538873be3c28556c Signed-off-by: Nathan Chancellor Signed-off-by: Michael Ellerman Link: https://msgid.link/20240127-ppc-xor_vmx-drop-msoft-float-v1-1-f24140e81376@kernel.org [nathan: Fixed conflicts due to lack of 04e85bbf71c9 in older trees] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

powerpc/lib: Validate size for vector operations

2024-02-23T07:12:44+00:00

[ Upstream commit 8f9abaa6d7de0a70fc68acaedce290c1f96e2e59 ] Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. Signed-off-by: Naveen N Rao Reviewed-by: Gustavo A. R. Silva Build-tested-by: Gustavo A. R. Silva Signed-off-by: Michael Ellerman Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org Signed-off-by: Sasha Levin

powerpc: Use always instead of always-y in for crtsavres.o

2024-02-23T07:12:40+00:00

This commit is for linux-4.19.y only, it has no direct upstream equivalent. Prior to commit 5f2fb52fac15 ("kbuild: rename hostprogs-y/always to hostprogs/always-y"), always-y did not exist, making the backport of mainline commit 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y") to linux-4.19.y as commit b7b85ec5ec15 ("powerpc: add crtsavres.o to always-y instead of extra-y") incorrect, breaking the build with linkers that need crtsavres.o: ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory Backporting the aforementioned kbuild commit is not suitable for stable due to its size and number of conflicts, so transform the always-y usage to an equivalent form using always, which resolves the build issues. Fixes: b7b85ec5ec15 ("powerpc: add crtsavres.o to always-y instead of extra-y") Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

powerpc: add crtsavres.o to always-y instead of extra-y

2024-01-25T22:33:31+00:00

[ Upstream commit 1b1e38002648819c04773647d5242990e2824264 ] crtsavres.o is linked to modules. However, as explained in commit d0e628cd817f ("kbuild: doc: clarify the difference between extra-y and always-y"), 'make modules' does not build extra-y. For example, the following command fails: $ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules [snip] LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1 make[2]: *** [Makefile:1844: modules] Error 2 make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2 make: *** [Makefile:234: __sub-make] Error 2 Signed-off-by: Masahiro Yamada Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux") Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org Signed-off-by: Sasha Levin

powerpc/lib/sstep: Fix build errors with newer binutils

2022-04-15T12:14:56+00:00

commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:10576: Error: unrecognized opcode: `stbcx.' {standard input}:10680: Error: unrecognized opcode: `lharx' {standard input}:10694: Error: unrecognized opcode: `lbarx' Rework to add assembler directives [1] around the instruction. The problem with this might be that we can trick a power6 into single-stepping through an stbcx. for instance, and it will execute that in kernel mode. [1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Signed-off-by: Anders Roxell Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman

powerpc/lib/sstep: Fix 'sthcx' instruction

2022-04-15T12:14:56+00:00

commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream. Looks like there been a copy paste mistake when added the instruction 'stbcx' twice and one was probably meant to be 'sthcx'. Changing to 'sthcx' from 'stbcx'. Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Arnd Bergmann Signed-off-by: Anders Roxell Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman

powerpc/lib/sstep: fix 'ptesync' build error

2022-02-23T10:58:40+00:00

commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann Signed-off-by: Anders Roxell [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman

powerpc/32: Fix boot failure with GCC latent entropy plugin

2022-02-08T17:23:06+00:00

commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Erhard Furtner Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman

powerpc/lib: Add helper to check if offset is within conditional branch range

2021-11-26T10:36:17+00:00

upstream commit 4549c3ea3160fa8b3f37dfe2f957657bb265eda9 Add a helper to check if a given offset is within the branch range for a powerpc conditional branch instruction, and update some sites to use the new helper. Signed-off-by: Naveen N. Rao Reviewed-by: Christophe Leroy Acked-by: Song Liu Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Naveen N. Rao Signed-off-by: Greg Kroah-Hartman