kernel/git/stable/linux-stable.git/drivers/firmware/imx, branch linux-6.17.y

firmware: imx: scu-irq: fix OF node leak in

2025-12-18T12:59:23+00:00

[ Upstream commit ee67247843a2b62d1473cfa4df300e69b5190ccf ] imx_scu_enable_general_irq_channel() calls of_parse_phandle_with_args(), but does not release the OF node reference. Add a of_node_put() call to release the reference. Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function") Reviewed-by: Frank Li Signed-off-by: Peng Fan Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx: Add i.MX95 SCMI CPU driver

2025-04-14T12:55:04+00:00

The i.MX95 System manager exports SCMI CPU protocol for linux to manage cpu cores. The driver is to use the cpu Protocol interface to start, stop a cpu cores (eg, M7). Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com> Signed-off-by: Sudeep Holla

firmware: imx: Add i.MX95 SCMI LMM driver

2025-04-14T12:55:04+00:00

The i.MX95 System manager exports SCMI LMM protocol for linux to manage Logical Machines. The driver is to use the LMM Protocol interface to boot, shutdown a LM. Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com> Signed-off-by: Sudeep Holla

Merge tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2025-03-06T15:32:48+00:00

i.MX fixes for 6.14: - A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for usdhc3 - A change from Joe Hattori to fix OF node leak in imx-scu driver probe - A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device in cleanup path - A couple of changes from Stefan Eichenberger to fix iMX6 Apalis poweroff and iMX8M verdin-dahlia sound-card descriptions * tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card soc: imx8m: Unregister cpufreq and soc dev in cleanup path ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6 arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply firmware: imx-scu: fix OF node leak in .probe() Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon Signed-off-by: Arnd Bergmann

firmware: imx-scu: fix OF node leak in .probe()

2025-02-18T03:22:50+00:00

imx_scu_probe() calls of_parse_phandle_with_args(), but does not release the OF node reference obtained by it. Add a of_node_put() call after done with the node. Fixes: f25a066d1a07 ("firmware: imx-scu: Support one TX and one RX") Signed-off-by: Joe Hattori Signed-off-by: Shawn Guo

firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC

2025-02-14T14:09:42+00:00

The i.MX System Controller Management Interface firmware is only present on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale i.MX platform support. Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency") Signed-off-by: Geert Uytterhoeven Reviewed-by: Fabio Estevam Signed-off-by: Arnd Bergmann

firmware: arm_scmi: Fix i.MX build dependency

2024-12-03T15:47:11+00:00

The newly added SCMI vendor driver references functions in the protocol driver but needs a Kconfig dependency to ensure it can link, essentially the Kconfig dependency needs to be reversed to match the link time dependency: | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write': | fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set' | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read': | fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get' This however only works after changing the dependency in the SND_SOC_FSL_MQS driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a driver it depends on. This is generally a bad idea, so the best solution is to change that into a dependency. To allow the ASoC driver to keep building with the SCMI support, this needs to be an optional dependency that enforces the link-time dependency if IMX_SCMI_MISC_DRV is a loadable module but not depend on it if that is disabled. Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface") Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Shengjiu Wang Message-Id: <20241115230555.2435004-1-arnd@kernel.org> Signed-off-by: Sudeep Holla

firmware: Switch back to struct platform_driver::remove()

2024-11-12T11:55:56+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/firmware to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/36974feb6035201d53384557259ec72fe311053b.1731397962.git.u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman

firmware: imx: Add i.MX95 MISC driver

2024-08-28T20:54:21+00:00

The i.MX95 System manager exports SCMI MISC protocol for linux to do various settings, such as set board gpio expander as wakeup source. The driver is to add the support. Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com> Signed-off-by: Sudeep Holla

firmware: imx-dsp: Convert to platform remove callback returning void

2024-01-04T16:01:14+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman