kernel/git/stable/linux-stable.git/drivers/firmware, branch linux-5.19.y

firmware: google: Test spinlock on panic path to avoid lockups

2022-10-24T07:57:57+00:00

[ Upstream commit 3e081438b8e639cc76ef1a5ce0c1bd8a154082c7 ] Currently the gsmi driver registers a panic notifier as well as reboot and die notifiers. The callbacks registered are called in atomic and very limited context - for instance, panic disables preemption and local IRQs, also all secondary CPUs (not executing the panic path) are shutdown. With that said, taking a spinlock in this scenario is a dangerous invitation for lockup scenarios. So, fix that by checking if the spinlock is free to acquire in the panic notifier callback - if not, bail-out and avoid a potential hang. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: Andrew Morton Cc: Ard Biesheuvel Cc: David Gow Cc: Greg Kroah-Hartman Cc: Julius Werner Cc: Petr Mladek Reviewed-by: Evan Green Signed-off-by: Guilherme G. Piccoli Link: https://lore.kernel.org/r/20220909200755.189679-1-gpiccoli@igalia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

efi: libstub: drop pointless get_memory_map() call

2022-10-24T07:56:58+00:00

commit d80ca810f096ff66f451e7a3ed2f0cd9ef1ff519 upstream. Currently, the non-x86 stub code calls get_memory_map() redundantly, given that the data it returns is never used anywhere. So drop the call. Cc: # v4.14+ Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

firmware: arm_scmi: Add SCMI PM driver remove routine

2022-10-12T07:51:23+00:00

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ] Currently, when removing the SCMI PM driver not all the resources registered with genpd subsystem are properly de-registered. As a side effect of this after a driver unload/load cycle you get a splat with a few warnings like this: | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present! | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present! Add a proper scmi_pm_domain_remove callback to the driver in order to take care of all the needed cleanups not handled by devres framework. Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_scmi: Harden accesses to the sensor domains

2022-10-12T07:51:23+00:00

[ Upstream commit 76f89c954788763db575fb512a40bd483864f1e9 ] Accessing sensor domains descriptors by the index upon the SCMI drivers requests through the SCMI sensor operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses. Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_scmi: Improve checks in the info_get operations

2022-10-12T07:51:23+00:00

[ Upstream commit 1ecb7d27b1af6705e9a4e94415b4d8cc8cf2fbfb ] SCMI protocols abstract and expose a number of protocol specific resources like clocks, sensors and so on. Information about such specific domain resources are generally exposed via an `info_get` protocol operation. Improve the sanity check on these operations where needed. Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"

2022-10-05T08:40:44+00:00

commit 3c6656337852e9f1a4079d172f3fddfbf00868f9 upstream. This reverts commit a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain"). Using the GENPD_FLAG_PM_CLK tells genpd to gate/ungate the consumer device's clock(s) during runtime suspend/resume through the PM clock API. More precisely, in genpd_runtime_resume() the clock(s) for the consumer device would become ungated prior to the driver-level ->runtime_resume() callbacks gets invoked. This behaviour isn't a good fit for all platforms/drivers. For example, a driver may need to make some preparations of its device in its ->runtime_resume() callback, like calling clk_set_rate() before the clock(s) should be ungated. In these cases, it's easier to let the clock(s) to be managed solely by the driver, rather than at the PM domain level. For these reasons, let's drop the use GENPD_FLAG_PM_CLK for the SCMI PM domain, as to enable it to be more easily adopted across ARM platforms. Fixes: a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain") Cc: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Tested-by: Peng Fan Acked-by: Sudeep Holla Link: https://lore.kernel.org/r/20220919122033.86126-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

firmware: arm_scmi: Fix the asynchronous reset requests

2022-09-28T09:32:08+00:00

[ Upstream commit b75c83d9b961fd3abf7310f8d36d5e6e9f573efb ] SCMI Reset protocol specification allows the asynchronous reset request only when an autonomous reset action is specified. Reset requests based on explicit assert/deassert of signals should not be served asynchronously. Current implementation will instead issue an asynchronous request in any case, as long as the reset domain had advertised to support asynchronous resets. Avoid requesting the asynchronous resets when the reset action is not of the autonomous type, even if the target reset domain does, in general, support the asynchronous requests. Link: https://lore.kernel.org/r/20220817172731.1185305-6-cristian.marussi@arm.com Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0") Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_scmi: Harden accesses to the reset domains

2022-09-28T09:32:08+00:00

[ Upstream commit e9076ffbcaed5da6c182b144ef9f6e24554af268 ] Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses. Link: https://lore.kernel.org/r/20220817172731.1185305-5-cristian.marussi@arm.com Signed-off-by: Cristian Marussi Signed-off-by: Sudeep Holla Stable-dep-of: b75c83d9b961 ("firmware: arm_scmi: Fix the asynchronous reset requests") Signed-off-by: Sasha Levin

efi: libstub: check Shim mode using MokSBStateRT

2022-09-28T09:32:05+00:00

commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream. We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: # v4.19+ Signed-off-by: Ard Biesheuvel Reviewed-by: Ilias Apalodimas Reviewed-by: Peter Jones Signed-off-by: Greg Kroah-Hartman

efi: x86: Wipe setup_data on pure EFI boot

2022-09-28T09:32:05+00:00

commit 63bf28ceb3ebbe76048c3fb2987996ca1ae64f83 upstream. When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/ Signed-off-by: Ard Biesheuvel Acked-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman