kernel/git/stable/linux-stable.git/drivers/i3c/master, branch linux-6.10.y

i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition

2024-10-10T10:00:58+00:00

commit 61850725779709369c7e907ae8c7c75dc7cec4f3 upstream. In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove. Fixes: 0f74f8b6675c ("i3c: Make i3c_master_unregister() return void") Cc: stable@vger.kernel.org Signed-off-by: Kaixin Wang Reviewed-by: Miquel Raynal Reviewed-by: Frank Li Link: https://lore.kernel.org/stable/20240914154030.180-1-kxwang23%40m.fudan.edu.cn Link: https://lore.kernel.org/r/20240914163932.253-1-kxwang23@m.fudan.edu.cn Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup

2024-09-12T09:13:04+00:00

[ Upstream commit 8a2be2f1db268ec735419e53ef04ca039fc027dc ] Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. Signed-off-by: Jarkko Nikula Link: https://lore.kernel.org/r/20240628131559.502822-3-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: master: svc: resend target address when get NACK

2024-09-12T09:13:03+00:00

[ Upstream commit 9bc7501b0b90f4d0c34b97c14ff1f708ce7ad8f3 ] According to I3C Spec 1.1.1, 11-Jun-2021, section: 5.1.2.2.3: If the Controller chooses to start an I3C Message with an I3C Dynamic Address, then special provisions shall be made because that same I3C Target may be initiating an IBI or a Controller Role Request. So, one of three things may happen: (skip 1, 2) 3. The Addresses match and the RnW bits also match, and so neither Controller nor Target will ACK since both are expecting the other side to provide ACK. As a result, each side might think it had "won" arbitration, but neither side would continue, as each would subsequently see that the other did not provide ACK. ... For either value of RnW: Due to the NACK, the Controller shall defer the Private Write or Private Read, and should typically transmit the Target ^^^^^^^^^^^^^^^^^^^ Address again after a Repeated START (i.e., the next one or any one prior ^^^^^^^^^^^^^ to a STOP in the Frame). Since the Address Header following a Repeated START is not arbitrated, the Controller will always win (see Section 5.1.2.2.4). Resend target address again if address is not 7E and controller get NACK. Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1

2024-08-03T07:01:08+00:00

[ Upstream commit be90ae1ba14a83962b33c4d4c854ef081186b0e4 ] I was wrong about the TABLE_SIZE field description in the commit 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes"). For the MIPI I3C HCI versions 1.0 and earlier the TABLE_SIZE field in the registers DAT_SECTION_OFFSET and DCT_SECTION_OFFSET is indeed defined in DWORDs and not number of entries like it is defined in later versions. Where above fix allowed driver initialization to continue the wrongly interpreted TABLE_SIZE field leads variables DAT_entries being twice and DCT_entries four times as big as they really are. That in turn leads clearing the DAT table over the boundary in the dat_v1.c: hci_dat_v1_init(). So interprete the TABLE_SIZE field in DWORDs for HCI versions < 1.1 and fix number of DAT/DCT entries accordingly. Fixes: 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes") Signed-off-by: Jarkko Nikula Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

i3c: dw: Add hot-join support.

2024-05-22T22:29:19+00:00

Add hot-join support for dw i3c master controller. By default, the hot-join acknowledgment is disabled, and the hardware will automatically send the DISEC CCC when it receives the hot-join request. Users can use the sys entry to enable it. Signed-off-by: Billy Tsai Link: https://lore.kernel.org/r/20240429073624.256830-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni

i3c: master: svc: fix invalidate IBI type and miss call client IBI handler

2024-05-22T22:29:19+00:00

In an In-Band Interrupt (IBI) handle, the code logic is as follows: 1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO, master->regs + SVC_I3C_MCTRL); 2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val, SVC_I3C_MSTATUS_IBIWON(val), 0, 1000); ... 3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status); ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status); SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return immediately, and the I3C controller has not sent out the 9th SCL yet. Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type occurrence and missing call I3C client driver's IBI handler. A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs during the controller send start frame in svc_i3c_master_xfer(). Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI to fix this issue. Cc: stable@vger.kernel.org Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame") Signed-off-by: Frank Li Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni

i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame

2024-05-22T22:29:19+00:00

svc_i3c_master_xfer() returns error ENXIO if an In-Band Interrupt (IBI) occurs when the host starts the frame. Change error code to EAGAIN to inform the client driver that this situation has occurred and to try again sometime later. Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame") Signed-off-by: Frank Li Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/r/20240506164009.21375-2-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni

i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling

2024-02-18T23:32:34+00:00

Disable IBI IRQ signal and status only when hot-join and SIR enabling of all target devices attached to the bus are disabled. Fixes: e389b1d72a62 ("i3c: dw: Add support for in-band interrupts") Signed-off-by: Dylan Hung Link: https://lore.kernel.org/r/20240119054547.983693-1-dylan_hung@aspeedtech.com Signed-off-by: Alexandre Belloni

i3c: master: cdns: Update maximum prescaler value for i2c clock

2024-01-07T23:51:36+00:00

As per the Cadence IP document fixed the I2C clock divider value limit from 16 bits instead of 10 bits. Without this change setting up the I2C clock to low frequencies will not work as the prescaler value might be greater than 10 bit number. I3C clock divider value is 10 bits only. Updating the macro names for both. Signed-off-by: Harshit Shah Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com Signed-off-by: Alexandre Belloni

i3c: master: svc: return actual transfer data len

2024-01-07T23:49:21+00:00

I3C allow devices early terminate data transfer. So set "actual_len" to indicate how much data get by i3c_priv_xfer. Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231201222532.2431484-6-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni