kernel/git/stable/linux-stable.git/drivers/ide/pci, branch linux-2.6.17.y

Missing PCI id update for VIA IDE

2006-09-08T21:51:39+00:00

The following change from -mm is important to 2.6.18 (actually to 2.6.17 but its too late for that). This was contributed over three months ago by VIA to Bartlomiej and nothing happened. As a result the new chipset is now out and Linux won't run on it. By the time 2.6.18 is finalised this will be the defacto standard VIA chipset so support would be a good plan. Tested in -mm for a while, its essentially a PCI ident update but for the bridge chip because VIA do things in weird ways. Signed-off-by: Greg Kroah-Hartman

[PATCH] sgiioc4: use mmio ops instead of port io

2006-05-31T23:27:11+00:00

From: Jeremy Higdon This patch fixes a bug in sgiioc4 where it was using the default IDE port I/O operations instead of MMIO. The IDE part of the IOC4 chip uses MMIO to map the chip registers. Unfortunately, the sgiioc4 driver uses the default port IO operations, which happens to have worked for the past few years. That's about to change, however, thus this change from inX/outX to readX/writeX. Signed-off-by: Jeremy Higdon Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] alim15x3: ULI M-1573 south Bridge support

2006-04-19T16:13:53+00:00

From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] remove the obsolete IDEPCI_FLAG_FORCE_PDC

2006-04-19T16:13:53+00:00

Noted by Sergei Shtylylov Signed-off-by: Adrian Bunk Acked-by: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] ide: ATI SB600 IDE support

2006-04-19T16:13:53+00:00

Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling Acked-by: Bartlomiej Zolnierkiewicz Cc: Alan Cox Acked-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge ../linux-2.6

2006-03-29T02:24:50+00:00

[PATCH] ide_generic_all_on() warning fix

2006-03-28T17:16:04+00:00

drivers/ide/pci/generic.c:45: warning: `ide_generic_all_on' defined but not used Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] Small fixes backported to old IDE SiS driver

2006-03-28T17:16:04+00:00

Some quick backport bits from the libata PATA work to fix things found in the sis driver. The piix driver needs some fixes too but those are way to large and need someone working on old IDE with time to do them. This patch fixes the case where random bits get loaded into SIS timing registers according to the description of the correct behaviour from Vojtech Pavlik. It also adds the SiS5517 ATA16 chipset which is not currently supported by the driver. Thanks to Conrad Harriss for loaning me the machine with the 5517 chipset. Signed-off-by: Alan Cox Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] ide: AMD756 no host side cable detection

2006-03-28T17:16:03+00:00

>From http://marc.theaimsgroup.com/?l=linux-kernel&m=110304128900342&w=2 AMD756 doesn't support host side cable detection. Do disk side only and don't advice obsolete options. Acked-by: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] powerpc: Kill _machine and hard-coded platform numbers

2006-03-28T12:15:54+00:00

This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras