kernel/git/stable/linux-stable.git/drivers/iio/common, branch linux-4.12.y

iio: hid-sensor-trigger: Fix the race with user space powering up sensors

2017-08-30T08:26:41+00:00

commit f1664eaacec31035450132c46ed2915fd2b2049a upstream. It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada Tested-by: Bastien Nocera Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: st_accel: add SPI-3wire support

2017-08-16T20:46:55+00:00

commit a7b8829d242b1a58107e9c02b09e93aec446d55c upstream. Add SPI Serial Interface Mode (SIM) register information in st_sensor_settings look up table to support devices (like LSM303AGR accel sensor) that allow just SPI-3wire communication mode. SIM mode has to be configured before any other operation since it is not enabled by default and the driver is not able to read without that configuration Whilst a fairly substantial patch, the actual logic is simple and it is better to have the generic fix than a band aid. Fixes: ddc05fa28606 (iio: st-accel: add support for lsm303agr accel) Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-04-18T17:38:38+00:00

Jonathan writes: Fifth set of IIO fixes for the 4.11 cycle. As these are rather late in the cycle, they may sneak over into 4.12. There is a fix for a regression caused by another fix (hid sensors hardware seems to vary a lot in how various corner cases are handled). * ad7303 - fix channel description. Numeric values were being passed as characters presumably leading to garbage from the userspace interface. * as3935 - the write data macro was wrong so fix it. * bmp280 - incorrect handling of negative values as being unsigned broke humidity calculation. * hid-sensor - Restore the poll and hysteresis values after resume as some hardware doesn't do it. * stm32-trigger - buglet in reading the sampling frequency

Merge tag 'iio-for-4.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-04-18T15:13:31+00:00

Jonathan writes: Fourth set of IIO new device support, features and cleanups for the 4.12 cycle New device support * max1117, 1118 and 1119 - new ADC driver * max9611 - new ADC driver * pm8xxx hk/xoadc - new driver with some shared features broken out from the SPMI vadc. * sun4i-gpadc - A33 thermal sensor support (with associated rework) * stm32-dac - new driver and bindings * stm32 trigger - enable support of quadrature encoder device and counter modes Features * apds9960 - use the runtime pm for normal suspend * stm32-adc - add opition to sest resolution via devicetree * xoadc - augment DT bindings to deal with some weird mux cases Cleanups * ad5933 - protect direct mode using claim and release helpers * ade7759 - S_IRUGO and friends to octal in two goes * adis16203 - drop unnecessary brackets * hid-sensor - fix unbalanced pm_runtieme_enable error when probing after remove * lsm6dsx - use actual part numbers for device name when known - simplify data read pin parsing * mpu3050 - avoid double reporting errors

Merge 4.11-rc6 into staging-next

2017-04-10T13:21:55+00:00

We want the staging and iio fixes in here to handle merging easier. Signed-off-by: Greg Kroah-Hartman

iio: hid-sensor: Fix unbalanced pm_runtime_enable error

2017-04-08T14:36:47+00:00

When a hid sensor module is removed and modprobed again we see error for unbalanced pm_runtime. This issue is caused by not deactivating runtime PM on removal. So on modprobe again when activated again, this will print this error. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: hid-sensor: Store restore poll and hysteresis on S3

2017-04-08T14:13:36+00:00

This change undo the change done by 'commit 3bec24747446 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3")' as this breaks some USB/i2c sensor hubs. Instead of relying on HW for restoring poll and hysteresis, driver stores and restores on resume (S3). In this way user space modified settings are not lost for any kind of sensor hub behavior. In this change, whenever user space modifies sampling frequency or hysteresis driver will get the feature value from the hub and store in the per device hid_sensor_common data structure. On resume callback from S3, system will set the feature to sensor hub, if user space ever modified the feature value. Fixes: 3bec24747446 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3") Reported-by: Ritesh Raj Sarraf Tested-by: Ritesh Raj Sarraf Tested-by: Song, Hongyan Cc: stable@vger.kernel.org Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-04-03T13:29:12+00:00

Third set of new device support, cleanups and features for IIO in the 4.12 cycle Somewhat dominated in patch numbers of last of the outreachy application window related patches (they are still coming, despite window being closed which is good to see!) Good set of new drivers as well. New device support * ASPEED ADC - new driver * cpcap PMIC ADC - new driver * hid-humidity - driver for HID compatible humidity sensors. * ltc2497 ADC - new driver * mpu6050 - bring bindings up to date and add trivial support for 9250 * rockchip-saradc - update bindings to cover rk3328 * vl6180 light, proximity and time of flight sensor. - new driver Features * meson-saradc - add calibration Cleanup and minor fixes * ad5504 - constify attribute_group structure - drop casting of void * * ad7150 - replace some shifts of 1 by BIT macro usage * ad7152 - blank lines between function definitions * ad7280a - octal permissions. * ad7606 - replace use of core mlock mutex with a local lock * ad7746 - replace some shifts of 1 by BIT macro usage - function parameter alignment - drop some excessive brackets (introduced in last pull request) * ad7753 - white space cleanup * ad7754 - includes in alphabetical order and groupped appropriately. - change from missuse of internal mlock mutex to using the buffer lock to also protect values during frequency update. * ad779x - constify attribute_group structures * ad9832 - octal permissions * adis16060 - remove use of core mlock mutex in favour of adding a local _spi_write_then_read which can use the local buffer protection lock. - fix naming of above function. * adis16203 - remove locking during reads of calibbias that doesn't protect anything not protected elsewhere. * adis16209 - remove unnecessary braces in single statement if * adis16240 - remove unnecessary braces in single statement if * adt7136 - drop excess blank lines and put some in between functions. * ams-iaq - replace comma with semi colon. Not actual bug, just unusual syntax. * apds9960 - constify attribute group structure * as3935 - constify attribute group structure * bm1750 - constify attribute group structure * cros_ec - devm version of triggered buffer setup to simplify code. * exynos - drop casting of void * * hdc100x - constify attribute_group structure * hid-accel - fix wrong scale for newly introduced gravity sensor. * hts221 - drop casting of void * * hx711 - constify attribute_group structure * imx7d_adc - drop casting of void * * lm35333 - constify attribute_group structure * lsm6dsx - drop casting of void * - hold ODR configuration until enabling to avoid a race condition. * max1027 - drop casting of void * * max11100 - fix a comma where semicolon was intended (no actual bug, just odd) * max1363 - constify attribute_group structure * ms sensors - drop casting of void * * rockchip_saradc - drop casting of void * * sun4i-gpadc - fix missing dependency on THERMAL or presence of stubs (issue only introduced in pervious set) - drop casting of void * * tsl2x7x - fix wrong standard deviation calc. Note these aren't actually used for anything at the moment so bug didn't really matter. - constify attribute group structure. * vf610adc - drop casting of void * * vz89x - replace comma with semicolon. Not actual bug, just odd syntax. * zpa2326 - drop casting of void *

iio: hid-sensor-attributes: Fix sensor property setting failure.

2017-04-02T10:44:03+00:00

When system bootup without get sensor property, set sensor property will be fail. If no get_feature operation done before set_feature, the sensor properties will all be the initialized value, which is not the same with sensor real properties. When set sensor property it will write back to sensor the changed perperty data combines with other sensor properties data, it is not right and may be dangerous. In order to get all sensor properties, choose to read one of the sensor properties(no matter read any sensor peroperty, driver will get all the peroperties and return the requested one). Fixes: 73c6768b710a ("iio: hid-sensors: Common attribute and trigger") Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron

iio: common: ms_sensors: Remove unnecessary cast on void pointer

2017-04-02T08:47:57+00:00

The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: simran singhal Signed-off-by: Jonathan Cameron