kernel/git/stable/linux-stable.git/drivers/media/usb, branch linux-3.12.y

dvb-usb-v2: avoid use-after-free

2017-05-03T12:22:42+00:00

commit 005145378c9ad7575a01b6ce1ba118fb427f583a upstream. I ran into a stack frame size warning because of the on-stack copy of the USB device structure: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Copying a device structure like this is wrong for a number of other reasons too aside from the possible stack overflow. One of them is that the dev_info() call will print the name of the device later, but AFAICT we have only copied a pointer to the name earlier and the actual name has been freed by the time it gets printed. This removes the on-stack copy of the device and instead copies the device name using kstrdup(). I'm ignoring the possible failure here as both printk() and kfree() are able to deal with NULL pointers. Signed-off-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab Cc: Ben Hutchings Signed-off-by: Jiri Slaby

uvcvideo: uvc_scan_fallback() for webcams with broken chain

2017-04-07T08:38:28+00:00

From: Henrik Ingo [ Upstream commit e950267ab802c8558f1100eafd4087fd039ad634 ] Some devices have invalid baSourceID references, causing uvc_scan_chain() to fail, but if we just take the entities we can find and put them together in the most sensible chain we can think of, turns out they do work anyway. Note: This heuristic assumes there is a single chain. At the time of writing, devices known to have such a broken chain are - Acer Integrated Camera (5986:055a) - Realtek rtl157a7 (0bda:57a7) Signed-off-by: Henrik Ingo Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sumit Semwal Signed-off-by: Jiri Slaby

uvcvideo: Fix a wrong macro

2017-03-13T20:40:20+00:00

commit 17c341ec0115837a610b2da15e32546e26068234 upstream. Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes. Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc") Signed-off-by: Guennadi Liakhovetski Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

siano: make it work again with CONFIG_VMAP_STACK

2017-03-01T09:38:13+00:00

commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream. Reported as a Kaffeine bug: https://bugs.kde.org/show_bug.cgi?id=375811 The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On Kernel 4.9, the default is to not accept DMA on stack anymore on x86 architecture. On other architectures, this has been a requirement since Kernel 2.2. So, after this patch, this driver should likely work fine on all archs. Tested with USB ID 2040:5510: Hauppauge Windham Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

dib0700: fix nec repeat handling

2016-11-24T15:23:41+00:00

commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream. When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by: Sean Young Tested-by: Sean Young Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds Signed-off-by: Jiri Slaby

cx231xx: fix GPIOs for Pixelview SBTVD hybrid

2016-10-28T18:36:58+00:00

commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream. This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

cx231xx: don't return error on success

2016-10-28T18:36:58+00:00

commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream. The cx231xx_set_agc_analog_digital_mux_select() callers expect it to return 0 or an error. Returning a positive value makes the first attempt to switch between analog/digital to fail. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

gspca: avoid unused variable warnings

2016-10-07T08:06:52+00:00

commit d7e92e15e92fc987640772bf110586898b5f15aa upstream. When CONFIG_INPUT is disabled, multiple gspca backend drivers print compile-time warnings about unused variables: media/usb/gspca/cpia1.c: In function 'sd_stopN': media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd' [-Werror=unused-variable] media/usb/gspca/konica.c: In function 'sd_stopN': media/usb/gspca/konica.c:246:13: error: unused variable 'sd' [-Werror=unused-variable] This annotates the variables as __maybe_unused, to let the compiler know that they are declared intentionally. Fixes: ee186fd96a5f ("[media] gscpa_t613: Add support for the camera button") Fixes: c2f644aeeba3 ("[media] gspca_cpia1: Add support for button") Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

em28xx-i2c: rt_mutex_trylock() returns zero on failure

2016-10-07T08:06:52+00:00

commit e44c153b30c9a0580fc2b5a93f3c6d593def2278 upstream. The code is checking for negative returns but it should be checking for zero. Fixes: aab3125c43d8 ('[media] em28xx: add support for registering multiple i2c buses') Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby

[media] usbvision: revert commit 588afcc1

2016-06-15T07:32:05+00:00

commit d5468d7afaa9c9e961e150f0455a14a9f4872a98 upstream. Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces array")' should be reverted, because: * "!dev->actconfig->interface[ifnum]" won't catch a case where the value is not NULL but some garbage. This way the system may crash later with GPF. * "(ifnum >= USB_MAXINTERFACES)" does not cover all the error conditions. "ifnum" should be compared to "dev->actconfig-> desc.bNumInterfaces", i.e. compared to the number of "struct usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES. * There is a "struct usb_device" leak in this error path, as there is usb_get_dev(), but no usb_put_dev() on this path. * There is a bug of the same type several lines below with number of endpoints. The code is accessing hard-coded second endpoint ("interface->endpoint[1].desc") which may not exist. It would be great to handle this in the same patch too. * All the concerns above are resolved by already-accepted commit fa52bd50 ("[media] usbvision: fix crash on detecting device with invalid configuration") * Mailing list message: http://www.spinics.net/lists/linux-media/msg94832.html Signed-off-by: Vladis Dronov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby