kernel/git/stable/linux-stable.git/drivers/mtd/chips, branch linux-5.2.y

mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()

2019-10-01T07:01:39+00:00

commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham Cc: Joakim Tjernlund Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni Signed-off-by: Felix Fietkau Signed-off-by: Hauke Mehrtens Signed-off-by: Tokunori Ikegami [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mtd: cfi_cmdset_0002: Mark expected switch fall-throughs

2019-05-06T19:57:05+00:00

mtd: cfi_util: mark expected switch fall-throughs

2019-05-06T19:57:04+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/chips/cfi_util.c: In function ‘cfi_build_cmd’: drivers/mtd/chips/cfi_util.c:110:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 32)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:112:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:113:10: warning: this statement may fall through [-Wimplicit-fallthrough=] onecmd |= (onecmd << (chip_mode * 16)); ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:114:2: note: here case 2: ^~~~ drivers/mtd/chips/cfi_util.c: In function ‘cfi_merge_status’: drivers/mtd/chips/cfi_util.c:163:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 32)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:165:2: note: here case 4: ^~~~ drivers/mtd/chips/cfi_util.c:166:7: warning: this statement may fall through [-Wimplicit-fallthrough=] res |= (onestat >> (chip_mode * 16)); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/chips/cfi_util.c:167:2: note: here case 2: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Richard Weinberger

mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer

2019-04-04T22:39:19+00:00

In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie Signed-off-by: Liu Jian Reviewed-by: Tokunori Ikegami Signed-off-by: Richard Weinberger

mtd: cfi: cmdset_0001: Use struct_size() in kmalloc()

2019-01-15T19:49:31+00:00

One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Boris Brezillon

mtd: gen_probe: Use struct_size() in kmalloc()

2019-01-15T19:49:29+00:00

mtd: cfi_cmdset_0020: Mark expected switch fall-throughs

2018-11-09T19:40:11+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114857 ("Missing break in switch") Addresses-Coverity-ID: 114858 ("Missing break in switch") Addresses-Coverity-ID: 114859 ("Missing break in switch") Addresses-Coverity-ID: 114860 ("Missing break in switch") Addresses-Coverity-ID: 114861 ("Missing break in switch") Addresses-Coverity-ID: 114862 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Boris Brezillon

Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

2018-08-11T10:15:19+00:00

Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "