kernel/git/stable/linux-stable.git/drivers/net/bonding, branch linux-6.4.y

bonding: fix macvlan over alb bond support

2023-08-30T12:52:34+00:00

[ Upstream commit e74216b8def3803e98ae536de78733e9d7f3b109 ] The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") aims to enable the use of macvlans on top of rlb bond mode. However, the current rlb bond mode only handles ARP packets to update remote neighbor entries. This causes an issue when a macvlan is on top of the bond, and remote devices send packets to the macvlan using the bond's MAC address as the destination. After delivering the packets to the macvlan, the macvlan will rejects them as the MAC address is incorrect. Consequently, this commit makes macvlan over bond non-functional. To address this problem, one potential solution is to check for the presence of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev) and return NULL in the rlb_arp_xmit() function. However, this approach doesn't fully resolve the situation when a VLAN exists between the bond and macvlan. So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit(). As the comment said, Don't modify or load balance ARPs that do not originate locally. Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu Acked-by: Jay Vosburgh Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves

2023-08-16T16:32:26+00:00

commit 01f4fd27087078c90a0e22860d1dfa2cd0510791 upstream. BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add bond0 type bond mode 0 # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 # ip netns exec ns1 ip link set bond_slave_1 master bond0 # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set bond_slave_1 nomaster # ip netns del ns1 The logical analysis of the problem is as follows: 1. create ETH_P_8021AD protocol vlan10 for bond_slave_1: register_vlan_dev() vlan_vid_add() vlan_info_alloc() __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1 2. create ETH_P_8021AD protocol bond0_vlan10 for bond0: register_vlan_dev() vlan_vid_add() __vlan_vid_add() vlan_add_rx_filter_info() if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER return 0; if (netif_device_present(dev)) return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid. 3. detach bond_slave_1 from bond0: __bond_release_one() vlan_vids_del_by_dev() list_for_each_entry(vid_info, &vlan_info->vid_list, list) vlan_vid_del(dev, vid_info->proto, vid_info->vid); // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted. // bond_slave_1->vlan_info will be assigned NULL. 4. delete vlan10 during delete ns1: default_device_exit_batch() dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10 vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1 BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!! Add S-VLAN tag related features support to bond driver. So the bond driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel Signed-off-by: Ziyang Xuan Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bonding: reset bond's flags when down link is P2P device

2023-08-03T08:25:51+00:00

[ Upstream commit da19a2b967cf1e2c426f50d28550d1915214a81d ] When adding a point to point downlink to the bond, we neglected to reset the bond's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to the bonding. To address this issue, let's reset the bond's flags for P2P interfaces. Before fix: 7: gre0@NONE: mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188:: 8: bond0: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 brd 2006:70:10::2 inet6 fe80::200:ff:fe00:0/64 scope link valid_lft forever preferred_lft forever After fix: 7: gre0@NONE: mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9:: 8: bond0: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 inet6 fe80::1/64 scope link valid_lft forever preferred_lft forever Reported-by: Liang Li Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Signed-off-by: Hangbin Liu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bonding: do not assume skb mac_header is set

2023-07-19T14:35:35+00:00

[ Upstream commit 6a940abdef3162e5723f1495b8a49859d1708f79 ] Drivers must not assume in their ndo_start_xmit() that skbs have their mac_header set. skb->data is all what is needed. bonding seems to be one of the last offender as caught by syzbot: WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Modules linked in: CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline] RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline] RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283 RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000 RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6 RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584 R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76 FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380 [] dev_direct_xmit include/linux/netdevice.h:3043 [inline] [] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284 [] packet_snd net/packet/af_packet.c:3112 [inline] [] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143 [] sock_sendmsg_nosec net/socket.c:716 [inline] [] sock_sendmsg net/socket.c:736 [inline] [] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [] __do_sys_sendto net/socket.c:2151 [inline] [] __se_sys_sendto net/socket.c:2147 [inline] [] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 7b8fc0103bb5 ("bonding: add a vlan+srcmac tx hashing option") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Jarod Wilson Cc: Moshe Tal Cc: Jussi Maki Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Vladimir Oltean Link: https://lore.kernel.org/r/20230622152304.2137482-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: fix stack overflow when LRO is disabled for virtual interfaces

2023-05-20T05:46:37+00:00

When the virtual interface's feature is updated, it synchronizes the updated feature for its own lower interface. This propagation logic should be worked as the iteration, not recursively. But it works recursively due to the netdev notification unexpectedly. This problem occurs when it disables LRO only for the team and bonding interface type. team0 | +------+------+-----+-----+ | | | | | team1 team2 team3 ... team200 If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE event to its own lower interfaces(team1 ~ team200). It is worked by netdev_sync_lower_features(). So, the NETDEV_FEAT_CHANGE notification logic of each lower interface work iteratively. But generated NETDEV_FEAT_CHANGE event is also sent to the upper interface too. upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own lower interfaces again. lower and upper interfaces receive this event and generate this event again and again. So, the stack overflow occurs. But it is not the infinite loop issue. Because the netdev_sync_lower_features() updates features before generating the NETDEV_FEAT_CHANGE event. Already synchronized lower interfaces skip notification logic. So, it is just the problem that iteration logic is changed to the recursive unexpectedly due to the notification mechanism. Reproducer: ip link add team0 type team ethtool -K team0 lro on for i in {1..200} do ip link add team$i master team0 type team ethtool -K team$i lro on done ethtool -K team0 lro off In order to fix it, the notifier_ctx member of bonding/team is introduced. Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack") Signed-off-by: Taehee Yoo Reviewed-by: Eric Dumazet Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski

bonding: fix send_peer_notif overflow

2023-05-10T08:27:20+00:00

Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications"). the bond->send_peer_notif will be num_peer_notif multiplied by peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif overflow easily. e.g. ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000 To fix the overflow, let's set the send_peer_notif to u32 and limit peer_notif_delay to 300s. Reported-by: Liang Li Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053 Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller

Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-05-06T02:12:01+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...

bonding: add xdp_features support

2023-05-05T08:34:23+00:00

Introduce xdp_features support for bonding driver according to the slave devices attached to the master one. xdp_features is required whenever we want to xdp_redirect traffic into a bond device and then into selected slaves attached to it. Reviewed-by: Simon Horman Acked-by: Jay Vosburgh Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi Reviewed-by: Jussi Maki Tested-by: Jussi Maki Signed-off-by: David S. Miller

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-04-20T23:29:51+00:00

Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski