kernel/git/stable/linux-stable.git/drivers/net/can, branch linux-3.6.y

can: peak_usb: fix hwtstamp assignment

2012-12-03T19:38:00+00:00

commit c9faaa09e2a1335678f09c70a0d0eda095564bab upstream. The skb->tstamp is set to the hardware timestamp when available in the USB urb message. This leads to user visible timestamps which contain the 'uptime' of the USB adapter - and not the usual system generated timestamp. Fix this wrong assignment by applying the available hardware timestamp to the skb_shared_hwtstamps data structure - which is intended for this purpose. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()

2012-10-07T15:39:35+00:00

commit f61bd0585dfc7d99db4936d7467de4ca8e2f7ea0 upstream. In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: ti_hecc: fix oops during rmmod

2012-09-21T10:54:53+00:00

This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [] lr : [] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [] (rollback_registered_many+0xc0/0x2a0) from [] (rollback_registered+0x20/0x30) [ 172.994750] [] (rollback_registered+0x20/0x30) from [] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [] (unregister_netdevice_queue+0x68/0x98) from [] (unregister_netdev+0x18/0x20) [ 173.015899] [] (unregister_netdev+0x18/0x20) from [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [] (platform_drv_remove+0x14/0x18) [ 173.036712] [] (platform_drv_remove+0x14/0x18) from [] (__device_release_driver+0x7c/0xbc) Cc: stable Cc: Anant Gole Tested-by: Jan Luebbe Signed-off-by: Marc Kleine-Budde

can: janz-ican3: fix support for older hardware revisions

2012-09-21T10:54:52+00:00

The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde

can: mcp251x: avoid repeated frame bug

2012-09-03T18:12:06+00:00

The MCP2515 has a silicon bug causing repeated frame transmission, see section 5 of MCP2515 Rev. B Silicon Errata Revision G (March 2007). Basically, setting TXBnCTRL.TXREQ in either SPI mode (00 or 11) will eventually cause the bug. The workaround proposed by Microchip is to use mode 00 and send a RTS command on the SPI bus to initiate the transmission. Cc: Signed-off-by: Benoît Locher Signed-off-by: Marc Kleine-Budde

can: sja1000_platform: fix wrong flag IRQF_SHARED for interrupt sharing

2012-08-24T08:54:05+00:00

The sja1000 platform driver wrongly assumes that a shared IRQ is indicated with the IRQF_SHARED flag in irq resource flags. This patch changes the driver to handle the correct flag IORESOURCE_IRQ_SHAREABLE instead. There are no mainline users of the platform driver which wrongly make use of IRQF_SHARED. Signed-off-by: Sven Schmitt Acked-by: Yegor Yefremov Signed-off-by: Marc Kleine-Budde

can: softing: Fix potential memory leak in softing_load_fw()

2012-08-24T08:54:05+00:00

Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Marc Kleine-Budde

net/c_can: remove conditional compilation of clk code

2012-07-31T00:25:12+00:00

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. Signed-off-by: Viresh Kumar Acked-by: David S. Miller Cc: Bhupesh Sharma Cc: Russell King Cc: Mike Turquette Cc: Sergei Shtylyov Cc: viresh kumar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

can: janz-ican3: add support for one shot mode

2012-07-20T15:49:05+00:00

The Janz VMOD-ICAN3 hardware has support for one shot packet transmission. This means that a packet will be attempted to be sent once, with no automatic retries. The SocketCAN core has a controller-wide setting for this mode: CAN_CTRLMODE_ONE_SHOT. The Janz VMOD-ICAN3 hardware supports this flag on a per-packet level, but the SocketCAN core does not. Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde

can: janz-ican3: avoid firmware lockup caused by infinite bus error quota

2012-07-20T15:49:05+00:00

If the bus error quota is set to infinite and the host CPU cannot keep up, the Janz VMOD-ICAN3 firmware will stop responding to control messages until the controller is reset. The firmware will automatically stop sending bus error messages when the quota is reached, and will only resume sending bus error messages when the quota is re-set to a positive value. This limitation is worked around by setting the bus error quota to one message, and then re-setting the quota to one message every time a bus error message is received. By doing this, the firmware never stops responding to control messages. The CAN bus can be reset without a hard-reset of the controller card. Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde