kernel/git/stable/linux-stable.git/drivers/net/can, branch linux-6.4.y

can: tcan4x5x: Remove reserved register 0x814 from writable table

2023-09-13T07:48:02+00:00

[ Upstream commit fbe534f7bf213d485b0ed5362b24a41bf3e18803 ] The mentioned register is not writable. It is reserved and should not be written. Fixes: 39dbb21b6a29 ("can: tcan4x5x: Specify separate read/write ranges") Signed-off-by: Markus Schneider-Pargmann Reviewed-by: Michal Kubiak Link: https://lore.kernel.org/all/20230728141923.162477-3-msp@baylibre.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

2023-09-13T07:48:02+00:00

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

net: validate veth and vxcan peer ifindexes

2023-08-30T12:52:31+00:00

[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ] veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

2023-08-03T08:26:03+00:00

commit f8a2da6ec2417cca169fa85a8ab15817bccbb109 upstream. After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: fix time stamp counter initialization

2023-07-27T06:56:37+00:00

commit 5886e4d5ecec3e22844efed90b2dd383ef804b3a upstream. If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076 Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_can_open(): improve error handling

2023-07-27T06:56:37+00:00

commit 2603be9e8167ddc7bea95dcfab9ffc33414215aa upstream. The gs_usb driver handles USB devices with more than 1 CAN channel. The RX path for all channels share the same bulk endpoint (the transmitted bulk data encodes the channel number). These per-device resources are allocated and submitted by the first opened channel. During this allocation, the resources are either released immediately in case of a failure or the URBs are anchored. All anchored URBs are finally killed with gs_usb_disconnect(). Currently, gs_can_open() returns with an error if the allocation of a URB or a buffer fails. However, if usb_submit_urb() fails, the driver continues with the URBs submitted so far, even if no URBs were successfully submitted. Treat every error as fatal and free all allocated resources immediately. Switch to goto-style error handling, to prepare the driver for more per-device resource allocation. Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout

2023-07-27T06:56:36+00:00

commit 9efa1a5407e81265ea502cab83be4de503decc49 upstream. The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0 mode' or . The maximum length of a CAN frame is 736 bits (64 data bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe spacing). For low bit rates like 10 kbit/s the arbitrarily chosen MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small. Otherwise during polling for the CAN controller to enter 'Normal CAN 2.0 mode' the timeout limit is exceeded and the configuration fails with: | $ ip link set dev can1 up type can bitrate 10000 | [ 731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468). | [ 731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying. | [ 731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in EFF mode, worst case bit stuffing and interframe spacing at the current bit rate. For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS that holds the max frame length in bits, which is 736. This can be replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in a cleanup patch later. Fixes: 55e5b97f003e8 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Fedor Ross Signed-off-by: Marek Vasut Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: kvaser_pciefd: Set hardware timestamp on transmitted packets

2023-07-19T14:35:34+00:00

[ Upstream commit ec681b91befa982477e24a150dd6452427fe6473 ] Set hardware timestamp on transmitted packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: kvaser_pciefd: Add function to set skb hwtstamps

2023-07-19T14:35:34+00:00

[ Upstream commit 2d55e9f9b4427e1ad59b974f2267767aac3788d3 ] Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps. Signed-off-by: Jimmy Assarsson Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Stable-dep-of: ec681b91befa ("can: kvaser_pciefd: Set hardware timestamp on transmitted packets") Signed-off-by: Sasha Levin

can: kvaser_pciefd: Disable interrupts in probe error path

2023-05-17T07:02:40+00:00

Disable interrupts in error path of probe function. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde