kernel/git/stable/linux-stable.git/drivers/ptp, branch linux-6.17.y

ptp_ocp: make ptp_ocp driver compatible with PTP_EXTTS_REQUEST2

2025-11-13T20:37:28+00:00

[ Upstream commit d3ca2ef0c915d219e0d958e0bdcc4be6c02c210b ] Originally ptp_ocp driver was not strictly checking flags for external timestamper and was always activating rising edge timestamping as it's the only supported mode. Recent changes to ptp made it incompatible with PTP_EXTTS_REQUEST2 ioctl. Adjust ptp_clock_info to provide supported mode and be compatible with new infra. While at here remove explicit check of periodic output flags from the driver and provide supported flags for ptp core to check. Signed-off-by: Vadim Fedorenko Link: https://patch.msgid.link/20250918131146.651468-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ptp: Limit time setting of PTP clocks

2025-11-13T20:37:11+00:00

[ Upstream commit 5a8c02a6bf52b1cf9cfb7868a8330f7c3c6aebe9 ] Networking drivers implementing PTP clocks and kernel socket code handling hardware timestamps use the 64-bit signed ktime_t type counting nanoseconds. When a PTP clock reaches the maximum value in year 2262, the timestamps returned to applications will overflow into year 1667. The same thing happens when injecting a large offset with clock_adjtime(ADJ_SETOFFSET). The commit 7a8e61f84786 ("timekeeping: Force upper bound for setting CLOCK_REALTIME") limited the maximum accepted value setting the system clock to 30 years before the maximum representable value (i.e. year 2232) to avoid the overflow, assuming the system will not run for more than 30 years. Enforce the same limit for PTP clocks. Don't allow negative values and values closer than 30 years to the maximum value. Drivers may implement an even lower limit if the hardware registers cannot represent the whole interval between years 1970 and 2262 in the required resolution. Signed-off-by: Miroslav Lichvar Cc: Richard Cochran Cc: Thomas Gleixner Cc: John Stultz Cc: Arnd Bergmann Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250828103300.1387025-1-mlichvar@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop

2025-10-29T13:10:20+00:00

[ Upstream commit a767957e7a83f9e742be196aa52a48de8ac5a7e4 ] In ptp_ocp_sma_fb_init(), the code mistakenly used bp->sma[1] instead of bp->sma[i] inside a for-loop, which caused only SMA[1] to have its DIRECTION_CAN_CHANGE capability cleared. This led to inconsistent capability flags across SMA pins. Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops") Signed-off-by: Jiasheng Jiang Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20251021182456.9729-1-jiashengjiangcool@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ptp: Add a upper bound on max_vclocks

2025-10-15T10:04:09+00:00

[ Upstream commit e9f35294e18da82162004a2f35976e7031aaf7f9 ] syzbot reported WARNING in max_vclocks_store. This occurs when the argument max is too large for kcalloc to handle. Extend the guard to guard against values that are too large for kcalloc Reported-by: syzbot+94d20db923b9f51be0df@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=94d20db923b9f51be0df Tested-by: syzbot+94d20db923b9f51be0df@syzkaller.appspotmail.com Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: I Viswanath Acked-by: Richard Cochran Link: https://patch.msgid.link/20250925155908.5034-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ptp: ocp: fix use-after-free bugs causing by ptp_ocp_watchdog

2025-08-30T02:10:22+00:00

The ptp_ocp_detach() only shuts down the watchdog timer if it is pending. However, if the timer handler is already running, the timer_delete_sync() is not called. This leads to race conditions where the devlink that contains the ptp_ocp is deallocated while the timer handler is still accessing it, resulting in use-after-free bugs. The following details one of the race scenarios. (thread 1) | (thread 2) ptp_ocp_remove() | ptp_ocp_detach() | ptp_ocp_watchdog() if (timer_pending(&bp->watchdog))| bp = timer_container_of() timer_delete_sync() | | devlink_free(devlink) //free | | bp-> //use Resolve this by unconditionally calling timer_delete_sync() to ensure the timer is reliably deactivated, preventing any access after free. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Duoming Zhou Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250828082949.28189-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski

ptp: prevent possible ABBA deadlock in ptp_clock_freerun()

2025-08-12T21:17:35+00:00

syzbot reported the following ABBA deadlock: CPU0 CPU1 ---- ---- n_vclocks_store() lock(&ptp->n_vclocks_mux) [1] (physical clock) pc_clock_adjtime() lock(&clk->rwsem) [2] (physical clock) ... ptp_clock_freerun() ptp_vclock_in_use() lock(&ptp->n_vclocks_mux) [3] (physical clock) ptp_clock_unregister() posix_clock_unregister() lock(&clk->rwsem) [4] (virtual clock) Since ptp virtual clock is registered only under ptp physical clock, both ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use() to lock &ptp->n_vclocks_mux and check ptp->n_vclocks. However, when unregistering vclocks in n_vclocks_store(), the locking ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of ptp_clock_unregister() called through device_for_each_child_reverse() is a virtual clock lock. Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are different locks, but in lockdep, a false positive occurs because the possibility of deadlock is determined through lock-class. To solve this, lock subclass annotation must be added to the posix_clock rwsem of the vclock. Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park Acked-by: Richard Cochran Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-07-30T15:58:55+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...

Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-07-29T21:02:53+00:00

Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const

ptp: Enable auxiliary clocks for PTP_SYS_OFFSET_EXTENDED

2025-07-03T13:36:06+00:00

Allow ioctl(PTP_SYS_OFFSET_EXTENDED*) to select CLOCK_AUX clock ids for generating the pre and post hardware readout timestamps. Aside of adding these clocks to the clock ID validation, this also requires to check the timestamp to be valid, i.e. the seconds value being greater than or equal zero. This is necessary because AUX clocks can be asynchronously enabled or disabled, so there is no way to validate the availability upfront. The same could have been achieved by handing the return value of ktime_get_aux_ts64() all the way down to the IOCTL call site, but that'd require to modify all existing ptp::gettimex64() callbacks and their inner call chains. The timestamp check achieves the same with less churn and less complicated code all over the place. Signed-off-by: Thomas Gleixner Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250701132628.491315452@linutronix.de Signed-off-by: Paolo Abeni

time/timecounter: Fix the lie that struct cyclecounter is const

2025-07-01T13:38:25+00:00

In both the read callback for struct cyclecounter, and in struct timecounter, struct cyclecounter is declared as a const pointer. Unfortunatly, a number of users of this pointer treat it as a non-const pointer as it is burried in a larger structure that is heavily modified by the callback function when accessed. This lie had been hidden by the fact that container_of() "casts away" a const attribute of a pointer without any compiler warning happening at all. Fix this all up by removing the const attribute in the needed places so that everyone can see that the structure really isn't const, but can, and is, modified by the users of it. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/2025070124-backyard-hurt-783a@gregkh