kernel/git/stable/linux-stable.git/drivers/regulator/ltc3676.c, branch master

regulator: handle regulator late cleanup race with PM suspend

2026-07-31T16:15:16+00:00

Joy Zou says: The regulator_init_complete_work fires ~30s after boot to disable unused regulators via I2C. When this work races with PM suspend, the I2C adapter may already be suspended, causing a -ESHUTDOWN warning dump. This series addresses the race and adds proper suspend power management for unused LDO regulators. Link: https://patch.msgid.link/20260731-b4-regulator-pf01-v2-0-a406c8737fdb@oss.nxp.com

regulator: ltc3676: Fix incorrect IRQSTAT bit offsets

2026-07-16T15:19:07+00:00

The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT (Interrupt Request Status) register layout documented in Table 15 of the LTC3676/LTC3676-1 datasheet: bit 0 - Pushbutton Status Active bit 1 - Hard Reset Occurred bit 2 - PGOOD Timeout Occurred bit 3 - Undervoltage Warning bit 4 - Undervoltage Standby (Fault) Occurred bit 5 - Overtemperature Warning bit 6 - Overtemperature Standby (Fault) Occurred bit 7 - Reserved The driver instead defines these starting at bit 3, one bit higher than the datasheet specifies, which causes ltc3676_regulator_isr() to check the wrong status bits and misreport (or miss) PGOOD timeout, undervoltage and thermal warning/fault conditions. Fix the bit offsets to match the datasheet. Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Ojha Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com Signed-off-by: Mark Brown

regulator: Use named initializers for arrays of i2c_device_data

2026-06-30T22:40:20+00:00

While being less compact, using named initializers allows to more easily see which members of the structs are assigned which value without having to lookup the declaration of the struct. And it's also more robust against changes to the struct definition. The mentioned robustness is relevant for a planned change to struct i2c_device_id that replaces .driver_data by an anonymous union. While touching all these arrays, unify usage of whitespace and commas. This patch doesn't modify the compiled arrays, only their representation in source form benefits. The former was confirmed with x86 and arm64 builds. Reviewed-by: Laurent Pinchart Signed-off-by: Uwe Kleine-König (The Capable Hub) Link: https://patch.msgid.link/2e83a9747ac2c92db8f91fd0e0eb311c4efe8e73.1782827697.git.u.kleine-koenig@baylibre.com Signed-off-by: Mark Brown

regulator: ltc3676: Use maple tree register cache

2023-06-19T11:59:45+00:00

The ltc3676 can only support single register read and write operations so does not benefit from block writes. This means it gets no benefit from using the rbtree register cache over the maple tree register cache so convert it to use maple trees instead, it is more modern. Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20230609-regulator-ltc-maple-v1-2-08c15181f8b2@kernel.org Signed-off-by: Mark Brown

regulator: Switch i2c drivers back to use .probe()

2023-05-07T23:50:11+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König

regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14

2023-03-20T13:11:25+00:00

Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown

regulator: remove locking around regulator_notifier_call_chain()

2020-09-07T17:35:25+00:00

regulator_notifier_call_chain() doesn't need rdev lock and rdev's existence is assumed in the code anyway. Remove the locks from drivers. Signed-off-by: Michał Mirosław Acked-by: Adam Thomson Reviewed-by: Dmitry Osipenko Link: https://lore.kernel.org/r/42393f66dcc4d80dcd9797be45216b4035aa96cb.1597032945.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown

regulator: ltc3676: Fix W=1 build warning when CONFIG_OF=n

2020-08-21T16:28:13+00:00

Fix below warning when CONFIG_OF=n: drivers/regulator/ltc3676.c:371:34: warning: ‘ltc3676_of_match’ defined but not used [-Wunused-const-variable=] 371 | static const struct of_device_id ltc3676_of_match[] = { | ^~~~~~~~~~~~~~~~ Signed-off-by: Jisheng Zhang Link: https://lore.kernel.org/r/20200821111517.59d7b8c8@xhacker.debian Signed-off-by: Mark Brown

regulator: ltc3676: Constify ltc3676_regulators

2020-06-18T12:47:33+00:00

ltc3676_regulators is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4361 2064 8 6433 1921 drivers/regulator/ltc3676.o After: text data bss dec hex filename 6121 304 8 6433 1921 drivers/regulator/ltc3676.o Signed-off-by: Rikard Falkeborn Link: https://lore.kernel.org/r/20200617223247.25566-4-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown

regulator: Convert i2c drivers to use .probe_new

2020-01-13T15:03:06+00:00

Use the new .probe_new for i2c drivers. These drivers do not use const struct i2c_device_id * argument, so convert them to utilise the simplified i2c driver registration. Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20200109155808.22003-1-axel.lin@ingics.com Signed-off-by: Mark Brown