kernel/git/stable/linux-stable.git/drivers/scsi, branch linux-5.19.y

scsi: 3w-9xxx: Avoid disabling device if failing to enable it

2022-10-24T07:58:24+00:00

[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ] The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device". We shouldn't disable a device that failed to be enabled. A simple return is fine. Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com Reported-by: Zheyu Ma Signed-off-by: Letu Ren Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID

2022-10-24T07:58:24+00:00

[ Upstream commit 59b7e210a522b836a01516c71ee85d1d92c1f075 ] An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to lpfc_nlp_put() with a null pointer to a nodelist structure. Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon entry. Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()

2022-10-24T07:57:58+00:00

[ Upstream commit 57569c37f0add1b6489e1a1563c71519daf732cf ] Fix a NULL pointer crash that occurs when we are freeing the socket at the same time we access it via sysfs. The problem is that: 1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold() does a get on the "struct sock". 2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put on the "struct socket" and that does __sock_release() which sets the sock->ops to NULL. 3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then call kernel_getpeername() which accesses the NULL sock->ops. Above we do a get on the "struct sock", but we needed a get on the "struct socket". Originally, we just held the frwd_lock the entire time but in commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()") we switched to refcount based because the network layer changed and started taking a mutex in that path, so we could no longer hold the frwd_lock. Instead of trying to maintain multiple refcounts, this just has us use a mutex for accessing the socket in the interface code paths. Link: https://lore.kernel.org/r/20220907221700.10302-1-michael.christie@oracle.com Fixes: bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()") Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Run recv path from workqueue

2022-10-24T07:57:58+00:00

[ Upstream commit f1d269765ee29da56b32818b7a08054484ed89f2 ] We don't always want to run the recv path from the network softirq because when we have to have multiple sessions sharing the same CPUs, some sessions can eat up the NAPI softirq budget and affect other sessions or users. Allow us to queue the recv handling to the iscsi workqueue so we can have the scheduler/wq code try to balance the work and CPU use across all sessions' worker threads. Note: It wasn't the original intent of the change but a nice side effect is that for some workloads/configs we get a nice performance boost. For a simple read heavy test: fio --direct=1 --filename=/dev/dm-0 --rw=randread --bs=256K --ioengine=libaio --iodepth=128 --numjobs=4 where the iscsi threads, fio jobs, and rps_cpus share CPUs we see a 32% throughput boost. We also see increases for small I/O IOPs tests but it's not as high. Link: https://lore.kernel.org/r/20220616224557.115234-4-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Sasha Levin

scsi: iscsi: Add recv workqueue helpers

2022-10-24T07:57:58+00:00

[ Upstream commit 8af809966c0b34cfacd8da9a412689b8e9910354 ] Add helpers to allow the drivers to run their recv paths from libiscsi's workqueue. Link: https://lore.kernel.org/r/20220616224557.115234-3-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Sasha Levin

scsi: iscsi: Rename iscsi_conn_queue_work()

2022-10-24T07:57:57+00:00

[ Upstream commit 4b9f8ce4d5e823e42944c5a0a4842b0f936365ad ] Rename iscsi_conn_queue_work() to iscsi_conn_queue_xmit() to reflect that it handles queueing of xmits only. Link: https://lore.kernel.org/r/20220616224557.115234-2-michael.christie@oracle.com Reviewed-by: Lee Duncan Reviewed-by: Wu Bo Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Stable-dep-of: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Sasha Levin

scsi: pm8001: Fix running_req for internal abort commands

2022-10-24T07:57:57+00:00

[ Upstream commit d8c22c4697c11ed28062afe3c2b377025be11a23 ] Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). Link: https://lore.kernel.org/r/1663854664-76165-1-git-send-email-john.garry@huawei.com Fixes: 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") Acked-by: Jack Wang Signed-off-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()

2022-10-24T07:57:57+00:00

[ Upstream commit 46ba53c30666717cb06c2b3c5d896301cd00d0c0 ] When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated. Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reviewed-by: Jason Yan Signed-off-by: Duoming Zhou Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedf: Populate sysfs attributes for vport

2022-10-24T07:56:51+00:00

commit 592642e6b11e620e4b43189f8072752429fc8dc3 upstream. Few vport parameters were displayed by systool as 'Unknown' or 'NULL'. Copy speed, supported_speed, frame_size and update port_type for NPIV port. Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com Cc: stable@vger.kernel.org Tested-by: Guangwu Zhang Reviewed-by: John Meneghini Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Rework MIB Rx Monitor debug info logic

2022-10-24T07:56:50+00:00

commit bd269188ea94e40ab002cad7b0df8f12b8f0de54 upstream. The kernel test robot reported the following sparse warning: arch/arm64/include/asm/cmpxchg.h:88:1: sparse: sparse: cast truncates bits from constant value (369 becomes 69) On arm64, atomic_xchg only works on 8-bit byte fields. Thus, the macro usage of LPFC_RXMONITOR_TABLE_IN_USE can be unintentionally truncated leading to all logic involving the LPFC_RXMONITOR_TABLE_IN_USE macro to not work properly. Replace the Rx Table atomic_t indexing logic with a new lpfc_rx_info_monitor structure that holds a circular ring buffer. For locking semantics, a spinlock_t is used. Link: https://lore.kernel.org/r/20220819011736.14141-4-jsmart2021@gmail.com Fixes: 17b27ac59224 ("scsi: lpfc: Add rx monitoring statistics") Cc: # v5.15+ Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman