kernel/git/stable/linux-stable.git/drivers/usb/dwc3, branch linux-6.3.y

usb: dwc3: gadget: Reset num TRBs before giving back the request

2023-06-21T14:02:12+00:00

commit 00f8205ffcf112dcef14f8151d78075d38d22c08 upstream. Consider a scenario where cable disconnect happens when there is an active usb reqest queued to the UDC. As part of the disconnect we would issue an end transfer with no interrupt-on-completion before giving back this request. Since we are giving back the request without skipping TRBs the num_trbs field of dwc3_request still holds the stale value previously used. Function drivers re-use same request for a given bind-unbind session and hence their dwc3_request context gets preserved across cable disconnect/connect. When such a request gets re-queued after cable connect, we would increase the num_trbs field on top of the previous stale value thus incorrectly representing the number of TRBs used. Fix this by resetting num_trbs field before giving back the request. Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable Signed-off-by: Elson Roy Serrao Acked-by: Thinh Nguyen Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman

USB: dwc3: fix use-after-free on core driver unbind

2023-06-21T14:02:12+00:00

commit e3dbb657571509044be15184a13134fa7c1fdca1 upstream. Some dwc3 glue drivers are currently accessing the driver data of the child core device directly, which is clearly a bad idea as the child may not have probed yet or may have been unbound from its driver. As a workaround until the glue drivers have been fixed, clear the driver data pointer before allowing the glue parent device to runtime suspend to prevent its driver from accessing data that has been freed during unbind. Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver") Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Cc: stable@vger.kernel.org # 5.12 Cc: Li Jun Cc: Sandeep Maheswaram Cc: Krishna Kurapati Signed-off-by: Johan Hovold Acked-by: Thinh Nguyen Reviewed-by: Manivannan Sadhasivam Message-ID: <20230607100540.31045-3-johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix NULL-deref on suspend

2023-06-21T14:02:12+00:00

commit d2d69354226de0b333d4405981f3d9c41ba8430a upstream. The Qualcomm dwc3 glue driver is currently accessing the driver data of the child core device during suspend and on wakeup interrupts. This is clearly a bad idea as the child may not have probed yet or could have been unbound from its driver. The first such layering violation was part of the initial version of the driver, but this was later made worse when the hack that accesses the driver data of the grand child xhci device to configure the wakeup interrupts was added. Fixing this properly is not that easily done, so add a sanity check to make sure that the child driver data is non-NULL before dereferencing it for now. Note that this relies on subtleties like the fact that driver core is making sure that the parent is not suspended while the child is probing. Reported-by: Manivannan Sadhasivam Link: https://lore.kernel.org/all/20230325165217.31069-4-manivannan.sadhasivam@linaro.org/ Fixes: d9152161b4bf ("usb: dwc3: Add Qualcomm DWC3 glue layer driver") Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Cc: stable@vger.kernel.org # 3.18: a872ab303d5d: "usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup" Cc: Sandeep Maheswaram Cc: Krishna Kurapati Signed-off-by: Johan Hovold Acked-by: Thinh Nguyen Reviewed-by: Manivannan Sadhasivam Message-ID: <20230607100540.31045-2-johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman

usb: dwc3: fix gadget mode suspend interrupt handler issue

2023-05-30T13:17:20+00:00

[ Upstream commit 4e8ef34e36f2839ef8c8da521ab7035956436818 ] When work in gadget mode, currently driver doesn't update software level link_state correctly as link state change event is not enabled for most devices, in function dwc3_gadget_suspend_interrupt(), it will only pass suspend event to UDC core when software level link state changes, so when interrupt generated in sequences of suspend -> reset -> conndone -> suspend, link state is not updated during reset and conndone, so second suspend interrupt event will not pass to UDC core. Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a suspended flag to replace the compare function. Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events") Cc: stable Acked-by: Thinh Nguyen Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: debugfs: Resume dwc3 before accessing registers

2023-05-24T16:30:19+00:00

commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami Reviewed-by: Johan Hovold Tested-by: Johan Hovold Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()

2023-05-24T16:30:19+00:00

commit c8540870af4ce6ddeb27a7bb5498b75fb29b643c upstream. Prevent -ETIMEDOUT error on .suspend(). e.g. If gadget driver is loaded and we are connected to a USB host, all transfers must be stopped before stopping the controller else we will not get a clean stop i.e. dwc3_gadget_run_stop() will take several seconds to complete and will return -ETIMEDOUT. Handle error cases properly in dwc3_gadget_suspend(). Simplify dwc3_gadget_resume() by using the introduced helper function. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") Cc: stable@vger.kernel.org Suggested-by: Thinh Nguyen Signed-off-by: Roger Quadros Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Execute gadget stop after halting the controller

2023-05-17T12:01:35+00:00

[ Upstream commit 39674be56fba1cd3a03bf4617f523a35f85fd2c1 ] Do not call gadget stop until the poll for controller halt is completed. DEVTEN is cleared as part of gadget stop, so the intention to allow ep0 events to continue while waiting for controller halt is not happening. Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20230420212759.29429-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: dwc3: gadget: drop dead hibernation code

2023-05-17T12:01:34+00:00

[ Upstream commit bdb19d01026a5cccfa437be8adcf2df472c5889e ] The hibernation code is broken and has never been enabled in mainline and should thus be dropped. Remove the hibernation bits from the gadget code, which effectively reverts commits e1dadd3b0f27 ("usb: dwc3: workaround: bogus hibernation events") and 7b2a0368bbc9 ("usb: dwc3: gadget: set KEEP_CONNECT in case of hibernation") except for the spurious interrupt warning. Acked-by: Thinh Nguyen Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20230404072524.19014-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 39674be56fba ("usb: dwc3: gadget: Execute gadget stop after halting the controller") Signed-off-by: Sasha Levin

usb: dwc3: gadget: Change condition for processing suspend event

2023-05-11T14:17:23+00:00

[ Upstream commit 4decf4060ecfee1f7a710999fcd421645ac0c419 ] Currently we process the suspend interrupt event only if the device is in configured state. Consider a case where device is not configured and got suspend interrupt, in that case our gadget will still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. Fix this by removing the condition for processing suspend event, and thus composite_resume would set vbus draw to 2. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Signed-off-by: Prashanth K Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/1677217619-10261-2-git-send-email-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: dwc3: fix runtime pm imbalance on unbind

2023-05-11T14:16:48+00:00

commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream. Make sure to balance the runtime PM usage count on driver unbind by adding back the pm_runtime_allow() call that had been erroneously removed. Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver") Cc: stable@vger.kernel.org # 5.9 Cc: Li Jun Acked-by: Thinh Nguyen Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman