kernel/git/stable/linux-stable.git/drivers/usb/serial, branch linux-6.12.y

USB: serial: digi_acceleport: fix write buffer corruption

2026-07-18T14:52:09+00:00

commit 24ca1fea8f2753bf33e1d458ec1ae5d9b7796a65 upstream. The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver. Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=11 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: digi_acceleport: fix hard lockup on disconnect

2026-07-18T14:52:09+00:00

commit 5c1ea24b53bf3bfb859f0a05573997487975da23 upstream. If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=1 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: digi_acceleport: fix broken rx after throttle

2026-07-18T14:52:09+00:00

commit 83a3dfc018943b05b6daf3a6f891833e1aabfa1f upstream. If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit Cinterion FE990D50 compositions

2026-07-18T14:52:09+00:00

commit b33ab1dd80f5c1742f49eb6ec7b337c5ffcf3d32 upstream. Add support for Telit Cinterion FE990D50 compositions: 0x990: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0990 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x991: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0991 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x992: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0992 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x993: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0993 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: keyspan_pda: fix information leak

2026-07-18T14:52:09+00:00

commit 6bfc8d01ac4068eced509f8fc74d0cd205e4dcec upstream. The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. Fixes: 034e38e8f687 ("USB: serial: keyspan_pda: add write-fifo support") Cc: stable@vger.kernel.org # 5.11 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: kl5kusb105: fix bulk-out buffer overflow

2026-06-19T11:42:29+00:00

commit 96d47e40bf9db4a9efd5c8fb53287a508d165f14 upstream. klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add usb-id for Dell Wireless DW5826e-m

2026-06-19T11:42:29+00:00

commit 1938fb9fe38c4f04a3f30bea44f8071c80a63be4 upstream. Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=81ea Rev= 5.04 S: Manufacturer=DELL S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A S: SerialNumber=358988870177734 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Reviewed-by: Lars Melin Cc: stable@vger.kernel.org [ johan: reserve also interface 4 ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()

2026-06-19T11:42:29+00:00

commit 0fd2b00b2d3d05e3eaa13342b3dfb0fa85c226ae upstream. build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in get_manuf_info()

2026-06-19T11:42:29+00:00

commit 183c1076eca43bbb3e7bdf597456f91d81c73e74 upstream. get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel [ johan: amend commit message; also check for short descriptors ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mct_u232: fix memory corruption with small endpoint

2026-06-19T11:42:17+00:00

commit 915b36d701950503c4ea0f6e314b10868e59fce3 upstream. The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin